Have you followed the instructions on the OnePlus website to return to stock? Maybe you need to start over?
[GUIDE] Mega Unbrick Guide for A Hard Bricked OnePlus 3
- Thread starter Naman Bhalla
- Start date
Hello
My device's bootloader is locked, I can't boot into recovery (phone just flashes the oneplus logo then reboots over and over) and when I try to unlock the bootloader via fastboot or ADB it says FAILED (remote: oem unlock is not allowed) Actually when I try to do much of anything it tells something along those lines. When I have it connected to my computer the phone is recognized as either android adb or Marshall London Device - Marshall London Bootloader Interface. I can't for the life of me figure out how to get my computer to recognize my phone as Qualcomm. Any help would be much appreciated. Thanks in advance. Super bummed here.
My device's bootloader is locked, I can't boot into recovery (phone just flashes the oneplus logo then reboots over and over) and when I try to unlock the bootloader via fastboot or ADB it says FAILED (remote: oem unlock is not allowed) Actually when I try to do much of anything it tells something along those lines. When I have it connected to my computer the phone is recognized as either android adb or Marshall London Device - Marshall London Bootloader Interface. I can't for the life of me figure out how to get my computer to recognize my phone as Qualcomm. Any help would be much appreciated. Thanks in advance. Super bummed here.
Last edited:
Before you can unlock the bootloader you need to enable OEM unlocking in Settings > Developer options. Did you do that first?
Attachments
Last edited:
Unfortunately I cannot boot the device. When I try to start it, the oneplus logo pops up the the phone reboots and repeat.
See if following these instructions on the OnePlus website helps.
http://downloads.oneplus.net/oneplus-3/oneplus_3_oxygenos_3.1.2
Power off phone by pressing power button for atleast 40 sec. Then press only volume up button for 10 sec and after 10 sec, while keeping volume up pressed, connect phone to PC and keep volume up pressed till a new device shows on pc (there won't be anything on phone though)
Then follow the guide.
Sent from my OnePlus2 using XDA Labs
Hey Bud, not sure why but something about the way you explained what I'd be looking at on the phone allowed me to fix the problem. I appreciate your help, heh, I appreciate EVERYONE who helped me. Thank you all so much. It's nice to see humans still helping one another. You guys rock, this community rocks! Again, THANKS!
Hey,
My OP3 was bricked and I successfully ran these steps. First I did method 1, which succeeded, but when booting the phone it told me about md5 mismatches in some partitions (boot, cache, system). So I ran method 2, which was also successful, but now when I try to boot my device it goes to oneplus logo and then to black screen with notification LED shining white. The same thing happens when trying to get into recovery. Can you help me? Thanks so much
My OP3 was bricked and I successfully ran these steps. First I did method 1, which succeeded, but when booting the phone it told me about md5 mismatches in some partitions (boot, cache, system). So I ran method 2, which was also successful, but now when I try to boot my device it goes to oneplus logo and then to black screen with notification LED shining white. The same thing happens when trying to get into recovery. Can you help me? Thanks so much
1. You don't need to check the MD5. It is because I didn't edit rawprogram.
2. Umm. Frankly, I haven't seen that yet. It might be a pressed button.
Hi OP, First of all thanks for this useful post. I presume it's a fastboot ROM package which I was looking for. Can you please tell me which version it is?
It is 3.1.2 and not fastboot package but Qualcomm package. Though, we can get fastboot images from it.
1. I did not check the md5. The phone did this automatically and then refused to boot, i.e. shut down.
2. I have contacted OnePlus Support and created a support ticket. However, I would like to try Method 2 one more time in case this fixes it. Am I correct in assuming that the device does not need to be displayed in device manager as "Qualcomm 9008"? For me it shows "Qualcomm HS-USB QDLoader 9008" and flashing works with the tool provided.
Thank you for your time!
Yea I mean indirect fastboot. However I just flashed the full package from your android file host page. My phone wasn't bricked but I was successfully flashed it from the bootloader mode. I also use another QC820 device as Mi5 and apply the same concept of flash though the interface is different but at the end both works same way. Basically earlier I flashed couple of stock recovery found here and there in the web. For the peace of mind I flashed this full package. Now my OP3 is running on 3.1.2. But my expectation was it would be the same as when I received the phone 3.1.1. However, I am still not getting 3.2.0 after couple of check in System updates. I want to set my mind that I am on pure stock mode. Am I on pure stock already ? Because I am not getting 3.2.0 update?
Our Apps
Get our official app!
The best way to access XDA on your phone
Nav Gestures
Add swipe gestures to any Android
One Handed Mode
Eases uses one hand with your phone