I did a clean install and the hardware buttons still don't work. I guess it is pie controls for me until it gets fixed 
[Guide] MI4S users help me to help you!
- Thread starter wertus33333
- Start date
Bad thing :/ i will recompile the kernel this week.I did a clean install and the hardware buttons still don't work. I guess it is pie controls for me until it gets fixed
Could you test an sd-card? for me it's working but i wannah go sure
also, if you use the uber version of kernel try the gcc version and vice versa (and pls tell me if you encounter any differences, otherwise i'll just compile with uber).
Awesome that you're getting us SD support back mate I should be able to test in the next few days too. (Just updated to MIUI Nougat and I truly hate it... Would try this now but my son is ill and I need to be able to contact my wife. She'd kill me if I was using a development OS again if she needed me haha)
Hope to see this continue to grow. Props to you and to @Cozzmy13 of course. If you get FPR support I'll buy you a coffee
Keep up the awesome work!
I should be able to test in the next few days too. (Just updated to MIUI Nougat and I truly hate it... Would try this now but my son is ill and I need to be able to contact my wife. She'd kill me if I was using a development OS again if she needed me haha)Hope to see this continue to grow. Props to you and to @Cozzmy13 of course. If you get FPR support I'll buy you a coffee
Keep up the awesome work!
I probably fixed it today. Will wait for @wertus33333 to compile the kernel.I did a clean install and the hardware buttons still don't work. I guess it is pie controls for me until it gets fixed
https://github.com/Demon000/kernel_xiaomi_libra/commit/d00d3ed4cc4ce877f694adccfa506d7425b1e2e2
New bootimg is on filehost, should fix the hw buttonsI did a clean install and the hardware buttons still don't work. I guess it is pie controls for me until it gets fixed
HW buttons are now working. SD card working. Thank you again for your hard work.
Next AICP build (today's one) will support both. You just need to edit the update-script in the zip and replace libra for aqua.HW buttons are now working. SD card working. Thank you again for your hard work.
Amazing so pleased support is back! Can't wait to start playing with custom ROMs again!!!
Sent from my MI 4S using XDA-Developers Legacy app
so pleased support is back! Can't wait to start playing with custom ROMs again!!!Sent from my MI 4S using XDA-Developers Legacy app
The effect is the same as if you just install any libra rom and install @Cozzmy13 s kernel which i have compiled and adjusted for aqua (from first post) afterwards (so you can use XOSP/RR/Lineage).Amazing
Sent from my MI 4S using XDA-Developers Legacy app
Last edited:
Well jenkins servers needed to be exchanged so there is no new build for now. Stay tunned for news.
Hey bud, just wanted to check which ROMS this is designed to work with? Tried it on the TS CM14 and got a bootloop and I've just installed the new official LOS14 and wanted to check before I flash it there. Are you still hoping for full support? (ie fpr) or is this more for booting and SD card now?
Either way, thanks for being awesome and looking after us aqua users!
Either way, thanks for being awesome and looking after us aqua users!
The kernel compiled here is my kernel and it's also in LOS, obviously. LOS supports all Mi4s (aqua) specific hardware including sdcard, excluding fingerprint sensor.
Nice so there's no need for me to flash this over your LOS14? I'm running it as we speak on my aqua. Very impressed I must say
. Buttery smoothSent from my Mi-4c using XDA-Developers Legacy app
How to roll back from N firmware to Lollipop? Would like to see LOS 14.1 on my device
Sent from my Mi-4s using XDA Labs
Sent from my Mi-4s using XDA Labs
Follow this guide
http://www.wizytechs.com/2016/03/how-to-unlock-xiaomi-mi4s-bootloader.html
but substitute the TWRP with one downloaded from the first post (or this one that I find more reliable - https://www.androidfilehost.com/?fid=385035244224383078)
Once you're done you'll be on the LP bootloader and you're ready to flash LOS14 - bear in mind you will lose FPR in all custom roms to date, otherwise they're fantastic and much nicer than stock. LOS14 has been seriously impressive on both battery and stability for me, worth sacrificing the FPR in my book.
http://www.wizytechs.com/2016/03/how-to-unlock-xiaomi-mi4s-bootloader.html
but substitute the TWRP with one downloaded from the first post (or this one that I find more reliable - https://www.androidfilehost.com/?fid=385035244224383078)
Once you're done you'll be on the LP bootloader and you're ready to flash LOS14 - bear in mind you will lose FPR in all custom roms to date, otherwise they're fantastic and much nicer than stock. LOS14 has been seriously impressive on both battery and stability for me, worth sacrificing the FPR in my book
.Yes, it's only for sd card and i compiled with UBERTC (should/could give a very little bit more battery and performance, i think i can feel it xD)
Also, for roms that don't support aqua "by default" (RR) you can flash the kernel for SD-card support. Otherwise it became pretty much useless.
Fingerprint was originally planed but i'm not experienced enough to do such things and i also didnt get a lot of support (except for cozzmi, thanks again dude).
Maybe i will start trying again but i have better things to do than sitting in front of my computer in summer (but winter will come xD)...
Totally understand mate, really nice that you worked on it at all. You've always got a beta tester here if you need one
wish I could help on the coffee front but since my little one came along my home life has little time for developmentSent from my Mi-4c using XDA-Developers Legacy app
First of all I would like to thank you for your hard work. I'm using RR rom ver 5.8.3. Now what kernel can I use for SDcard support? CM14.1 or R5-Basic(old)? thanks you.
CM14.1 is the new version, try this one. If it doesnt boot/ u have other problems try the old one (R5-Basic).First of all I would like to thank you for your hard work. I'm using RR rom ver 5.8.3. Now what kernel can I use for SDcard support? CM14.1 or R5-Basic(old)? thanks you.
It's both Cozzmis kernel, CM14.1 is just the new branch (with big changes compared to R5-Basic)
Our Apps
Get our official app!
The best way to access XDA on your phone
Nav Gestures
Add swipe gestures to any Android
One Handed Mode
Eases uses one hand with your phone