[Guide][MTK] Increase Speaker Volume of your Phone

[Swagat4187]

You can increase the speaker volume yourself, it is very simple [MTK Chipset Only]

Here are steps:

1. Install Mobileuncle MTK Tool

2. Open Mobileuncle MTK Tool and select Engineer Mode

3. Select Engineer Mode MTK

4. Swap to Harware Testing

5. Select Audio

6. Select Loudspeaker Mode

7. Here you will find Max Volume Value 128, Change this to 145 and press set.

8. You can set this value up to 160 but above 150 is not recommended else it may damage your speaker.

9. Now you can close Mobileuncle MTK Tool.

Now you can check the volume of your speaker and feel the difference.

I have tested this method on my MMX Nitro A310.

OR

You can type the following code to access MTK engg. mode

*#*#3646633#*#*

There are options to set volume for earphone, and speaker separately.

Warning: MTK Engineer Mode is not supposed to be a user end interface, Changing any value In-correctly may damage your phone or disable/damage its functionality.

 

[jeetpatel2002]

Not showing

I have installed cm12.1 in this rom it is not working.
Should i install stock rom.
Both methods not working.

 

[Swagat4187]

I have installed cm12.1 in this rom it is not working.
Should i install stock rom.
Both methods not working.

You should be able to. I was using CM 12.1 ROM sometime back and was able to use the second method of USSD dialling. Please check.

 

[Ahmed Alisha]

I have installed cm12.1 in this rom it is not working.
Should i install stock rom.
Both methods not working.

CyanogenMod doesn't have engineering mode, so it will not work in cm roms. MIUI and stock or any roms which have engineering mode enabled you can increase volume.:good:

 

[rahulpatkar88]

I have done same process as given in blog. I want to do change in NORMAL MODE setting change for volume.
I am facing some little bit issue from sound. when I call to any other one with using phone by hand then I am not able to hear voice of other person in Normal mode but other person are able to hear clearly me. when I use headphone or using loudspeaker then sound are coming properly.Even I am able to hear music sound or videos sound properly without headphone also... Only facing sound issue without headphone and loudspeaker in Normally.
Please tell me how I can resolve this issue.
My SET is MICROMAX CANVAS A114---- what Range i can put in Normal Mode inside Audio.
my email [email protected]