[GUIDE][OFFICIAL OP2 FILES][OOS 2.1.1] Unbrick/Recover OnePlus 2 Back to stock 100%

[manishnraj]

same problem is with my phone.
The bootloader unlock status is false which sould have been true.
Any help will be appreciated.

 

[Jakkomo77]

Hello I want to have the DL Link, I have send you a PM.thank you


Gesendet von meinem ONE A2003 mit Tapatalk

 

[Spannaa]

Hello I want to have the DL Link, I have send you a PM.thank you


Gesendet von meinem ONE A2003 mit Tapatalk

There are three working download links in the first post, or did you mean something else?

Tapatalked via OnePlus 2

 

[Jakkomo77]

OnePlus does not want these files to be shared for public, drop me a PM. i will remove them as soon as i read it!

OK,Sorry!
But what means this?


Gesendet von meinem ONE A2003 mit Tapatalk

 

[Spannaa]

OnePlus does not want these files to be shared for public, drop me a PM. i will remove them as soon as i read it!

OK,Sorry!
But what means this?

It means that the recovery tool is the password protected official tool that OnePlus support use remotely to fix soft bricked devices.
@paultje162 has just shared it after removing the password protection and was just saying that he'd remove the zip if requested to by OnePlus.



Tapatalked via OnePlus 2

 

[xateeq]

Hi,
I just tried the method explained by OP and i got stuck in the process (userdata_64G)
i did disable drivers signature enforcement, and drivers are good to go see the image below.
Any help would be great, my oneplus2 is i think soft brick, on every boot it boots right into stock recovery.

---------- Post added at 03:18 PM ---------- Previous post was at 03:09 PM ----------

Hi,
I just tried the method explained by OP and i got stuck in the process (userdata_64G)
i did disable drivers signature enforcement, and drivers are good to go see the image below.
Any help would be great, my oneplus2 is i think soft brick, on every boot it boots right into stock recovery.

I tried again and bam process went through, i got this green message in Chinese and phone automatically boots into recovery mode.
Any thoughts on what should be my next step ?
Edit: the exit button is not active so i was thinking the process is still ongoing, giving another 10 minutes before proceeding forward.

 

[madmax.mfp]

I can see proper drivers, Qualcomm 9008 but line in tool goes red after 10 sec and nothing is happening, any ideas?
Images are not transferred to phone at all, tried all methods I could find but tool just gives me red line instead of green...

 

[SirMika]

Dear OnePlus lovers,

You are doing this on your own responsibility. I do not take any credit for bricked devices because of this method!

Today is the day that the official OnePlus 2 Qualcomm restore zip has been "unpacked"! So i proudly present the 100% original OxygenOS recovery files.

These files can be used for recovering a soft bricked OnePlus 2 device. Even if the partitions are messed up. This should get a lot of work off the shoulders of OnePlus. And you don't have to wait for the support team to fix your OnePlus. It can also help fixing Home Button issues.

Download all necessary files here:
Full wipe including internal SD: Google Drive, AndroidFileHost, MediaFire
Full wipe excluding internal SD: **Not Yet**

Step by step instructions(THIS WILL WIPE YOUR ONEPLUS INCLUDING INTERNAL SD):

1. Open the "OnePlus 2 Qualcomm Recovery Package.rar" and extract it to desktop.(You will need WinRAR to extract this!)
2. You will find 2 folders. "OP2_O2_MP8" and "qc"
3. First, we are going to install the Qualcomm drivers. Open the folder "qc" and run the setup wizard
4. When completed. Restart your PC.
5. Turn off your phone and disconnect the USB cable from the phone.
6. Hold vol-up and plug in the USB(NO power button needed!). The screen will stay black but you will hear a sound from windows that a device is attached.
7. The driver should now automatically install. If not, go to device manager and right click "Unknown Device" and click "Update Driver" Search up the QC folder and press ok. The driver should now install. (Got the RELINK issue? Take a look here: http://forum.xda-developers.com/showpost.php?p=64674951&postcount=46)
8. Now you are ready for the restore progress. Open the OP2_O2_MP8 folder and open "MSM8994DownloadTool.exe"
9. Look if your phone is detected in the list. everything is chinese but you will see one different rule in the list. If not, check connection with PC.
10. First click the right square chinese button. This will verify if all downloaded files are succesfully downloaded and that the MD5 is correct.
11. When everything is ok. Press the start button. and let the progress finish.
12. When it's done. Disconnect the USB cable and turn on the device.

Congratulations! You now succesfully recovered your OnePlus!

If OnePlus does not want these files to be shared for public, drop me a PM. i will remove them as soon as i read it!

first thing what im gonna do is this.

EDIT: Same problem goes on.

TWRP+Oxygen 3.0 beta knows lots of troubles..we`ll see can i fix it or did i just lost 330€

none of the tutorials etc haven`t help so far, except OPT Firstaid that i got TWRP back, which is gone by now because i tried this

 

[LOL9988]

Through this can I hope my FP would be back?
Its dead for a month now


Sent from my ONE A2003 using Tapatalk

 

[Jakkomo77]

Hello , is this toll coming with OOS 3.0.2 ?

Thanks a lot

Gesendet von meinem ONE A2003 mit Tapatalk

 

[isaurabhkhanna]

woaaaah... worked like a charm... was stuck on 3.0.1 with corrupt recovery..... and after searching a lotthis thing finally saved my op2 from dying.... tnx a lot guys for hard work...

 

[reinierkramer]

it solved my problem thanks for the guide !

 

[Lonemaster]

Hello, so a fellow forum member @timejtw had helped me with this problem. Here's how to fix if you are seeing RELINK instead of Qualcom

1. Uninstall any previous qualcom/relink drivers through device manager (gonna redo the whole process)
2. ENABLE test mode (Open program as administrator) by this > http://www.ngohq.com/?page=dseo
3. Restart PC
4. Disable auto install drivers in windows. For windows 7, go to device and printer > right click your computer > Device installation setting > select No and Never install driver
4. Hold volume up button and connect to laptop again, it will see OP2 as QHSB_BULK in device manager
5. Right click QHSB_BULK and install driver in qc folder.
6. Now it should show Qualcom for your OP2.
7. Your OP2 should now appear in MSM8994DownloadTool

Afterwards you can renable the auto install drivers

All credits go to @timejtw

Fun is what i have after noticing that it shows me QUSB_BULK instead of QHSB_BULK. Why do I keep getting problems? :crying:

 

[BeHappyToo]

I had the same issue once, long ago and well, turned out it was because I didn't have a working recovery flashed (was corrupted and unable to flash). I ended up
1. Re-flashing this Package again and then entered the fastboot mode.
2. Flashed TWRP recovery and booting into it once and rebooting normally.
3. Once the OS loaded, rebooted back to fastboot to flash the stock recovery.

Do have a try and let us know.

I have also the same issue that after flashing I only see the Oneplus logo and after that the phone stays black. I have no problems with the MSM-tool. Works fine (ends up 'green')
I tried to flash TWRP with fastboot, but the bootloader is locked and I receive an error message that it is not possible.

Can you tell me what I am doing wrong.

Thanks!!!

 

[voonying]

The progress bar on my recovery tool turned red instead of green. Anyone can help?

 

[Avi0104]

sir i got this problem while oem unlock "oem unlock desabled" fastboot flash locked

sir i got this problem while oem unlock "oem unlock desabled" fastboot flash locked

 

[rompup]

I have the same "oem unlock desabled" issue but I havn't tried flashing a new rom yet. Also I cannot get the phone to recognize my sim card now? Anyone have any suggestions?

 

[Barthd2]

Life Saver --- Thanks so much!

Dear OnePlus lovers,

You are doing this on your own responsibility. I do not take any credit for bricked devices because of this method!

Today is the day that the official OnePlus 2 Qualcomm restore zip has been "unpacked"! So i proudly present the 100% original OxygenOS recovery files.

These files can be used for recovering a soft bricked OnePlus 2 device. Even if the partitions are messed up. This should get a lot of work off the shoulders of OnePlus. And you don't have to wait for the support team to fix your OnePlus. It can also help fixing Home Button issues.

Download all necessary files here:
Full wipe including internal SD: Google Drive, AndroidFileHost, MediaFire
Full wipe excluding internal SD: **Not Yet**

Step by step instructions(THIS WILL WIPE YOUR ONEPLUS INCLUDING INTERNAL SD):

1. Open the "OnePlus 2 Qualcomm Recovery Package.rar" and extract it to desktop.(You will need WinRAR to extract this!)
2. You will find 2 folders. "OP2_O2_MP8" and "qc"
3. First, we are going to install the Qualcomm drivers. Open the folder "qc" and run the setup wizard
4. When completed. Restart your PC.
5. Turn off your phone and disconnect the USB cable from the phone.
6. Hold vol-up and plug in the USB(NO power button needed!). The screen will stay black but you will hear a sound from windows that a device is attached.
7. The driver should now automatically install. If not, go to device manager and right click "Unknown Device" and click "Update Driver" Search up the QC folder and press ok. The driver should now install. (Got the RELINK issue? Take a look here: http://forum.xda-developers.com/showpost.php?p=64674951&postcount=46)
8. Now you are ready for the restore progress. Open the OP2_O2_MP8 folder and open "MSM8994DownloadTool.exe"
9. Look if your phone is detected in the list. everything is chinese but you will see one different rule in the list. If not, check connection with PC.
10. First click the right square chinese button. This will verify if all downloaded files are succesfully downloaded and that the MD5 is correct.
11. When everything is ok. Press the start button. and let the progress finish.
12. When it's done. Disconnect the USB cable and turn on the device.

Congratulations! You now succesfully recovered your OnePlus!

If OnePlus does not want these files to be shared for public, drop me a PM. i will remove them as soon as i read it!

Appreciate you walk-through here. I soft-bricked my OP2 in Early January so I bought my wife a new OP3T, and I took over her OPO. This one is back going exactly as you said it would and even though its now a bit dated, its like having a brand new phone again!

BartHD2

 

[KuldeepShivankar]

hi, is this thread still alive? Please help me when i was flashing ROM from PC to my redmi 4 , my op2 was connects via usb in other slots. And after that my op2 Got bricked. Then i flashed stock rom from a tool but after booting phone doesn't have network(i think i lost my efs partition) Please guide me.
Thanks.

 

[anupritaisno1]

hi, is this thread still alive? Please help me when i was flashing ROM from PC to my redmi 4 , my op2 was connects via usb in other slots. And after that my op2 Got bricked. Then i flashed stock rom from a tool but after booting phone doesn't have network(i think i lost my efs partition) Please guide me.
Thanks.

Sell the phone to me so that I can continue development of my ROM for op2

Much appreciated

~ the guy who pretends to care but really doesn't