A bit confused. If I'm getting lte but not volte will unlocking help?
Sent from my ONEPLUS A3003 using XDA-Developers mobile app
Sent from my ONEPLUS A3003 using XDA-Developers mobile app
So the status now is that if we neglect the IMEI change, the method works. But a qcn that works without changing IMEI is the missing part?
no,
VoLTE is a whole different matter,
there are a lot of NV values related to VoLTE in our QCN, and each carrier will need different config,
normally the config can be pushed through network, when you connect to your carrier network. but for some carrier, it simply doesnt work,
not to mention, on some ROM, even the IMS_enable (VoLTE will need the phone to be able to connect to IMS, thats the main prerequisite) value is still "0", thus it wont even try to connect to IMS
what carrier are you on? T-Mo ? Jio ?
Could this post help?
It talks about how IMEI appears in the qcn file of Samsung devices. Similar?
It talks about how IMEI appears in the qcn file of Samsung devices. Similar?
Attachments
Could be, but I don't think so since in my own backup my hex Imei was just my normal hex Imei, nothing special going on.
Last edited:
We fully aware about the IMEI locstion in the QCN, our current problem is that the IMEI encrypted by Oneplus, thus we can't simply edit the QCN to change it
but, read my words bellow, there's good news about this, (well at least partially)
I've tried @baskaflyfer QCN for Band 5 & 8, and you know what, it works !I tried
So the only problem remaining to unlock bands is the IMEI removal?
so now I GOT BAND 5 UNLOCKED, AND MY IMEI INTACT
dear Baska & @allluke, you might want to take a look again into the Band 3 QCN file, because the band 5 verzion work fine, and i got decent signal/reception on both sim without issue,
it connect to band 5 as well
and the most important thing is, IMEI issue is solved
@allluke when u throw in the band 3 QCN and unlock it using DFS, on what network mode did u set your phone ?
Last edited:
Unlocked it as per your instructions on page 1. I will try again in next hour and see again.We fully aware about the IMEI locstion in the QCN, our current problem is that the IMEI encrypted by Oneplus, thus we can't simply edit the QCN to change it
but, read my words bellow, there's good news about this, (well at least partially)
I've tried @baskaflyfer QCN for Band 5 & 8, and you know what, it works !
so now I GOT BAND 5 UNLOCKED, AND MY IMEI INTACT
dear Baska & @allluke, you might want to take a look again into the Band 3 QCN file, because the band 5 verzion work fine, and i got decent signal/reception on both sim without issue,
it connect to band 5 as well
and the most importance is, IMEI issue is solved
@allluke when u throw in the band 3 QCN and unlock it using DFS, on what network mode did u set your phone ?
It's good newsWe fully aware about the IMEI locstion in the QCN, our current problem is that the IMEI encrypted by Oneplus, thus we can't simply edit the QCN to change it
but, read my words bellow, there's good news about this, (well at least partially)
I've tried @baskaflyfer QCN for Band 5 & 8, and you know what, it works !
so now I GOT BAND 5 UNLOCKED, AND MY IMEI INTACT
dear Baska & @allluke, you might want to take a look again into the Band 3 QCN file, because the band 5 verzion work fine, and i got decent signal/reception on both sim without issue,
it connect to band 5 as well
and the most importance is, IMEI issue is solved
I'll try to do an another QCN for the B3
Yeah just retried band3.qcn two more times with the same looping unusable signals coming in and out. Just following OP first page instructions.It's good news
I'll try to do an another QCN for the B3
Okay, it's new *.qcn b3 for US version. Just restore and reboot. didn't need any manipulation in DFS.
Last edited:
I must be doing something wrong, same result with your new .qcn
Give me time, I'll check it again
and one question, which QCN are you used before, when you had the working b3???
Last edited:
I used the one provided by OP which was labelled A3000CN QCN. I don't have the computer with me which I used but only my laptop sadly.Give me time, I'll check it again
and one question, which QCN are you used before, when you had the working b3???
Okay, thanks. I'll try to figure out what the problem is.
Guys thanks so much for all the hard work you are putting into this. It feels as though you are so close, and I am sure a lot of people are anxiously refreshing this thread as I am. Know your work is truly appreciated :good:
Sent from my ONEPLUS A3000 using XDA Labs
Sent from my ONEPLUS A3000 using XDA Labs
Please somebody help me with this regard. I am getting LTE but not VoLTE. The phone is China bound. Model A3000. Jio VoLTE is not working. TIA.
And what about IMEI!? Something like this. Screenshots attached
Later i explain it, now i try unlock band 3 for US version, but i need a QCN A3000us, because it's difficult to test it on A3000cn. In PM, please.
Later i explain it, now i try unlock band 3 for US version, but i need a QCN A3000us, because it's difficult to test it on A3000cn. In PM, please.
Attachments
Hahahah, wow, you even experimenting it on 7.0And what about IMEI!? Something like this. Screenshots attached
Later i explain it, now i try unlock band 3 for US version, but i need a QCN A3000us, because it's difficult to test it on A3000cn. In PM, please.
@baskaflyfer if you indeed managed to find a way of replacing IMEI,
i think i can just re-provide the CN QCN for US users aand they can replace the IMEI later on,
or maybe i can pre-edit the QCN as well
what do you think ?
Last edited:
New posts
-
Official StatiXOS 4.1 Release (Android 11)- Latest: SirDigitalKnight
-
Our Apps
Get our official app!
The best way to access XDA on your phone
Nav Gestures
Add swipe gestures to any Android
One Handed Mode
Eases uses one hand with your phone