Patch can be applied through TWRPOk
So first I will apply patch
Root is necessary?
Root is needed to enable diag port, you can use snowwolf apk for that as well,
Please,
Read again the main post. Anything was described there.
Patch can be applied through TWRPOk
So first I will apply patch
Root is necessary?
Very first page of this thread. Step number 5. Has the link you need. Download the app. No driver required once you use the app (at least for me).Hello to all colleagues, I have less than 24 hrs with the OP3 and I have almost 3 hours reading everything and trying to download the necessary
But I definitely need help to guide me, to begin with I have OOS 4.1.3, model A3000 and I need the band 4 for the LTE to work in my country, But I'm not sure what version of OP3 I have, I have 2 imei so it's not the Chinese version that I read that only has an imei, I already have the bootloader unlocked, twrp installed and rooted with magisk
Attachment screenshot of info showing network signal guru
Try to follow the tutorial but I can not install the drivers correctly on the port diag, and without that I can not follow, and disable the protection of installation of unsigned drivers of win10
If it is possible to enable a band, does it work even after rebooting the cell? Or after a hard reset or even flashing a rom? I hope someone can help me, and believe me, I already read and read but I need help
Greetings and thanks in advance
Post 5? I'll check right awayVery first page of this thread. Step number 5. Has the link you need. Download the app. No driver required once you use the app (at least for me).
Sorry mate. I sent you the wrong area. The app I'm talking about is on page 137 or 138.Post 5? I'll check right away
Hahaha if you notice it, thanks for your help friend!Sorry mate. I sent you the wrong area. The app I'm talking about is on page 137 or 138.
sadly B4 is untested and unproofen, since no active dev (me, baska & snowwolf) of this thread has that band in our countryHahaha if you notice it, thanks for your help friend!
Excellent the apk to simplify everything, but I found a problem that I can not solve, I can not install the QXDM, My laptop uses windows 10 and it gives me the error of internet explorer 6... Any suggestions???
Edit 2: Problem overcome, I simply had to find the correct version that works with windows 10
I was able to follow all the steps, but I can not unlock the band 4 that is the one I need, I do not know that QCN is the one that I should flash my A3000 CN to be able to unlock the band 4, any help?
I understand ... and precisely those files are the ones I use ... I will have to sell it and buy a US versionsadly B4 is untested and unproofen, since no active dev (me, baska & snowwolf) of this thread has that band in our country![]()
thus doesnt matter what we tried, we cant really test & debug it realtime
in a normal methodology, what u need is flashing US based QCN (USMODELNOIMEINEW.qcn) followed by the fbrx of US (fbrx_us.qcn) model as well. And finish it by changing the NV 1878 to 232
but no one has much luck with B4 & B12 so far
I'm on T-Mobile in the US so if you need any files just let me know.Hi everybody,
In August I'll be in the US, and I want to use the 2nd sim feature for a Tmobile sim.
Is there a way to unlock LTE band 2,4, and 12 on OP3T EU?
Or change the frequencies from EU to US till I'll be in the US?
Thanks.
You're welcome to try but this was made with all OnePlus 3 devices in mind. The rmt storage latch especially. Always back up efs in TWRPCan anyone tell that wheather it will work for le max2 or not
Its working on 4.1.6... but you will need to re-flash your additional bands again after you update...Hi everyone
If i will update the software the patch will sty?
Does anyone try to update to 4.1.6?
Most important think is to reflash the storage patch.Hi everyone
If i will update the software the patch will sty?
Does anyone try to update to 4.1.6?