[GUIDE] QDLoader 9008 fix | EDL Mode fix

Search This thread

dreams1723

Member
Sep 12, 2010
27
1
Hello everyone, my asus zenfone 6 bricked yesterday. It is completely black. When i connect it to pc, it is showing in pc as qdloader 9008. It is not charging. And always remain in EDL mode. I tried button combos but nothing happened it just blink screen for a nano second. I tried to flash update_update _edl.bat script. It flashes everytime but I can't go into bootload.
Is there any QFIL rom which i can flash on it. I can see `prog_firehose_ddr.elf` file but not a .mbn file. Kindly help if anyone know..Thank you
 

Robi687642

New member
Dec 5, 2020
1
0
Hi everyone,
If your phone does not react on any of yours actions. You may have the same problem. This is an instruction how to fix it.
If you have a last version of Windows 10 you can easily check if it is your case (You will have "Qualcomm HS-USB QDLoader 9008" device at your Windows devices' list.

How to Fix:
1. Download Drivers Qualcomm_QDLoader_HS-USB_Driver_64bit_Setup.zip and install it.
2. Download firmware link1 or link2
3. Install the driver
4. Unpack a firmware archive
5. Power off your phone by pressing Voice Down + Power Buttons (If your phone would be in this state too long the script would not works).
6. Start update_image_EDL.bat script - it will recreate all of the partitions
7. After the script will finish you will see the bootloader
8. Start script flashall_AFT.cmd - it will install firmware to the new partitions
9. Download fresh official firmware from asus site and put the archive at your memory card.
10. Start bootloader
11. Go to a standard recovery mode and install this firmware form the card
12. restart and repeat 10-11 (it will install software at the second state)
13. The problem is fixed. Congratulations!

Common problems:
Exception: System.DLLNotFoundException: DLL "QMSL_MSVC10R.dll": Module was not found. (HRESULT: 0x8007007E) can not be loaded.
Solution: You need to install Microsoft Visual C++ 2010 Service Pack 1 Redistributable Package MFC. Thanks to Genim


I followed every steps but there is a issue Please Help

Start ufs flat download . . .
Loading parameters may takes few minutes, please wait...
2020-12-06 00:05:39.804 MODE:3
2020-12-06 00:05:39.812 LOGFILEPATH:E:\STAR\FirmwareX.Net_WW_ZS630KL_16.1220.
1906.167_M3.6.17.27_Phone-user.raw\test1.txt
2020-12-06 00:05:39.813 Validating Application Configuration
2020-12-06 00:05:39.821 Load APP Configuration
2020-12-06 00:05:39.830 COM:3
2020-12-06 00:05:39.830 PBLDOWNLOADPROTOCOL:0
2020-12-06 00:05:39.831 PROGRAMMER:True
2020-12-06 00:05:39.831 PROGRAMMER:E:\STAR\FirmwareX.Net_WW_ZS630KL_16.1220.1
906.167_M3.6.17.27_Phone-user.raw\prog_firehose_ddr.elf
2020-12-06 00:05:39.831 RESETSAHARASTATEMACHINE:False
2020-12-06 00:05:39.831 SAHARAREADSERIALNO:False
2020-12-06 00:05:39.831 SEARCHPATH:E:\STAR\FirmwareX.Net_WW_ZS630KL_16.1220.1
906.167_M3.6.17.27_Phone-user.raw
2020-12-06 00:05:39.831 RAWPROGRAM:
2020-12-06 00:05:39.831 rawprogram0.xml
2020-12-06 00:05:39.831 rawprogram1.xml
2020-12-06 00:05:39.831 rawprogram2.xml
2020-12-06 00:05:39.831 rawprogram3.xml
2020-12-06 00:05:39.831 rawprogram4.xml
2020-12-06 00:05:39.831 rawprogram5.xml
2020-12-06 00:05:39.832 PATCH:
2020-12-06 00:05:39.832 patch0.xml
2020-12-06 00:05:39.832 patch1.xml
2020-12-06 00:05:39.832 patch2.xml
2020-12-06 00:05:39.832 patch3.xml
2020-12-06 00:05:39.833 patch4.xml
2020-12-06 00:05:39.833 patch5.xml
2020-12-06 00:05:39.833 ACKRAWDATAEVERYNUMPACKETS:False
2020-12-06 00:05:39.834 ACKRAWDATAEVERYNUMPACKETS:100
2020-12-06 00:05:39.834 MAXPAYLOADSIZETOTARGETINBYTES:True
2020-12-06 00:05:39.834 MAXPAYLOADSIZETOTARGETINBYTES:49152
2020-12-06 00:05:39.834 DEVICETYPE:ufs
2020-12-06 00:05:39.834 PLATFORM:8x26
2020-12-06 00:05:39.834 VALIDATIONMODE:0
2020-12-06 00:05:39.834 RESETAFTERDOWNLOAD:True
2020-12-06 00:05:39.834 MAXDIGESTTABLESIZE:8192
2020-12-06 00:05:39.835 SWITCHTOFIREHOSETIMEOUT:50
2020-12-06 00:05:39.835 RESETTIMEOUT:500
2020-12-06 00:05:39.835 RESETDELAYTIME:5
2020-12-06 00:05:39.835 METABUILD:
2020-12-06 00:05:39.835 METABUILD:
2020-12-06 00:05:39.835 FLATBUILDPATH:C:\
2020-12-06 00:05:39.835 FLATBUILDFORCEOVERRIDE:True
2020-12-06 00:05:39.835 QCNPATH:C:\Temp\00000000.qcn
2020-12-06 00:05:39.835 QCNAUTOBACKUPRESTORE:False
2020-12-06 00:05:39.835 SPCCODE:000000
2020-12-06 00:05:39.836 ENABLEMULTISIM:False
2020-12-06 00:05:39.836 AUTOPRESERVEPARTITIONS:False
2020-12-06 00:05:39.836 PARTITIONPRESERVEMODE:0
2020-12-06 00:05:39.836 PRESERVEDPARTITIONS:0
2020-12-06 00:05:39.836 PRESERVEDPARTITIONS:
2020-12-06 00:05:39.837 ERASEALL:False
2020-12-06 00:05:39.837 Load ARG Configuration
2020-12-06 00:05:39.837 COM:20
2020-12-06 00:05:39.837 PROGRAMMER:True
2020-12-06 00:05:39.837 PROGRAMMER:E:\STAR\FirmwareX.Net_WW_ZS630KL_16.1220.1
906.167_M3.6.17.27_Phone-user.raw\prog_firehose_ddr.elf
2020-12-06 00:05:39.838 SEARCHPATH:E:\STAR\FirmwareX.Net_WW_ZS630KL_16.1220.1
906.167_M3.6.17.27_Phone-user.raw
2020-12-06 00:05:39.838 RAWPROGRAM:
2020-12-06 00:05:39.838 rawprogram0.xml
2020-12-06 00:05:39.838 rawprogram1.xml
2020-12-06 00:05:39.838 rawprogram2.xml
2020-12-06 00:05:39.838 rawprogram3.xml
2020-12-06 00:05:39.838 rawprogram4.xml
2020-12-06 00:05:39.838 rawprogram5.xml
2020-12-06 00:05:39.838 PATCH:
2020-12-06 00:05:39.838 patch0.xml
2020-12-06 00:05:39.838 patch1.xml
2020-12-06 00:05:39.838 patch2.xml
2020-12-06 00:05:39.838 patch3.xml
2020-12-06 00:05:39.839 patch4.xml
2020-12-06 00:05:39.839 patch5.xml
2020-12-06 00:05:39.839 MAXPAYLOADSIZETOTARGETINBYTES:True
2020-12-06 00:05:39.839 MAXPAYLOADSIZETOTARGETINBYTES:49152
2020-12-06 00:05:39.839 DEVICETYPE:UFS
2020-12-06 00:05:39.839 RESETAFTERDOWNLOAD:True
2020-12-06 00:05:39.839 SWITCHTOFIREHOSETIMEOUT:50
2020-12-06 00:05:39.839 RESETTIMEOUT:500
2020-12-06 00:05:39.839 RESETDELAYTIME:5
2020-12-06 00:05:39.862 Validating Download Configuration
2020-12-06 00:05:39.865 Image Search Path: E:\STAR\FirmwareX.Net_WW_ZS630KL_1
6.1220.1906.167_M3.6.17.27_Phone-user.raw
2020-12-06 00:05:39.868 RAWPROGRAM file path: E:\STAR\FirmwareX.Net_WW_ZS630K
L_16.1220.1906.167_M3.6.17.27_Phone-user.raw\rawprogram0.xml
2020-12-06 00:05:39.869 RAWPROGRAM file path: E:\STAR\FirmwareX.Net_WW_ZS630K
L_16.1220.1906.167_M3.6.17.27_Phone-user.raw\rawprogram1.xml
2020-12-06 00:05:39.869 RAWPROGRAM file path: E:\STAR\FirmwareX.Net_WW_ZS630K
L_16.1220.1906.167_M3.6.17.27_Phone-user.raw\rawprogram2.xml
2020-12-06 00:05:39.869 RAWPROGRAM file path: E:\STAR\FirmwareX.Net_WW_ZS630K
L_16.1220.1906.167_M3.6.17.27_Phone-user.raw\rawprogram3.xml
2020-12-06 00:05:39.869 RAWPROGRAM file path: E:\STAR\FirmwareX.Net_WW_ZS630K
L_16.1220.1906.167_M3.6.17.27_Phone-user.raw\rawprogram4.xml
2020-12-06 00:05:39.869 RAWPROGRAM file path: E:\STAR\FirmwareX.Net_WW_ZS630K
L_16.1220.1906.167_M3.6.17.27_Phone-user.raw\rawprogram5.xml
2020-12-06 00:05:39.869 PATCH file path:E:\STAR\FirmwareX.Net_WW_ZS630KL_16.1
220.1906.167_M3.6.17.27_Phone-user.raw\patch0.xml
2020-12-06 00:05:39.869 PATCH file path:E:\STAR\FirmwareX.Net_WW_ZS630KL_16.1
220.1906.167_M3.6.17.27_Phone-user.raw\patch1.xml
2020-12-06 00:05:39.869 PATCH file path:E:\STAR\FirmwareX.Net_WW_ZS630KL_16.1
220.1906.167_M3.6.17.27_Phone-user.raw\patch2.xml
2020-12-06 00:05:39.869 PATCH file path:E:\STAR\FirmwareX.Net_WW_ZS630KL_16.1
220.1906.167_M3.6.17.27_Phone-user.raw\patch3.xml
2020-12-06 00:05:39.869 PATCH file path:E:\STAR\FirmwareX.Net_WW_ZS630KL_16.1
220.1906.167_M3.6.17.27_Phone-user.raw\patch4.xml
2020-12-06 00:05:39.869 PATCH file path:E:\STAR\FirmwareX.Net_WW_ZS630KL_16.1
220.1906.167_M3.6.17.27_Phone-user.raw\patch5.xml
2020-12-06 00:05:39.870 Programmer Path:E:\STAR\FirmwareX.Net_WW_ZS630KL_16.1
220.1906.167_M3.6.17.27_Phone-user.raw\prog_firehose_ddr.elf
2020-12-06 00:05:39.909 QFIL version: 2.0.2.1
2020-12-06 00:05:39.936 Start Download
2020-12-06 00:05:39.943 Program Path:E:\STAR\FirmwareX.Net_WW_ZS630KL_16.1220
.1906.167_M3.6.17.27_Phone-user.raw\prog_firehose_ddr.elf
2020-12-06 00:05:39.948 ***** Working Folder:C:\Users\gh\AppData\Roaming\Qual
comm\QFIL\COMPORT_20
2020-12-06 00:07:09.992 Binary build date: Apr 27 2018 @ 03:04:33
2020-12-06 00:07:09.992 QSAHARASERVER CALLED LIKE THIS: 'E:\STAR\FirmwareX.Ne
t_WW_ZS630KL_16.1220.1906.167_M3.6.17.27_Phone-user.raw\QSaharaServer.ex'Current
working dir: C:\Users\gh\AppData\Roaming\Qualcomm\QFIL\COMPORT_20
2020-12-06 00:07:09.994 Sahara mappings:
2020-12-06 00:07:09.996 2: amss.mbn
2020-12-06 00:07:09.996 6: apps.mbn
2020-12-06 00:07:09.997 8: dsp1.mbn
2020-12-06 00:07:09.998 10: dbl.mbn
2020-12-06 00:07:09.998 11: osbl.mbn
2020-12-06 00:07:09.999 12: dsp2.mbn
2020-12-06 00:07:10.000 16: efs1.mbn
2020-12-06 00:07:10.001 17: efs2.mbn
2020-12-06 00:07:10.001 20: efs3.mbn
2020-12-06 00:07:10.002 21: sbl1.mbn
2020-12-06 00:07:10.003 22: sbl2.mbn
2020-12-06 00:07:10.004 23: rpm.mbn
2020-12-06 00:07:10.005 25: tz.mbn
2020-12-06 00:07:10.006 28: dsp3.mbn
2020-12-06 00:07:10.007 29: acdb.mbn
2020-12-06 00:07:10.008 30: wdt.mbn
2020-12-06 00:07:10.008 31: mba.mbn
2020-12-06 00:07:10.011 13: E:\STAR\FirmwareX.Net_WW_ZS630KL_16.1220.1906.167
_M3.6.17.27_Phone-user.raw\prog_firehose_ddr.elf
2020-12-06 00:07:10.011
2020-12-06 00:07:10.012 00:07:09: ERROR: function: sahara_rx_data:277 Unable
to read packet header. Only read 0 bytes.
2020-12-06 00:07:10.014
2020-12-06 00:07:10.014 00:07:09: ERROR: function: sahara_main:983 Sahara pro
tocol error
2020-12-06 00:07:10.015
2020-12-06 00:07:10.016 00:07:09: ERROR: function: main:320 Uploading Image
using Sahara protocol failed
2020-12-06 00:07:10.017
2020-12-06 00:07:10.017
2020-12-06 00:07:10.020 Download Fail:Sahara Fail:QSaharaServer Fail:process
fail
2020-12-06 00:07:10.021 Finish Download
2020-12-06 00:07:10.020 Download Fail:Sahara Fail:QSaharaServer Fail:process
fail
press any key to continue . . .
Press any key to continue . . .
 

Oldmandan18

Member
Sep 23, 2015
16
6
I followed every steps but there is a issue Please Help

Start ufs flat download . . .
Loading parameters may takes few minutes, please wait...
2020-12-06 00:05:39.804 MODE:3
2020-12-06 00:05:39.812 LOGFILEPATH:E:\STAR\FirmwareX.Net_WW_ZS630KL_16.1220.
1906.167_M3.6.17.27_Phone-user.raw\test1.txt
2020-12-06 00:05:39.813 Validating Application Configuration
2020-12-06 00:05:39.821 Load APP Configuration
2020-12-06 00:05:39.830 COM:3
2020-12-06 00:05:39.830 PBLDOWNLOADPROTOCOL:0
2020-12-06 00:05:39.831 PROGRAMMER:True
2020-12-06 00:05:39.831 PROGRAMMER:E:\STAR\FirmwareX.Net_WW_ZS630KL_16.1220.1
906.167_M3.6.17.27_Phone-user.raw\prog_firehose_ddr.elf
2020-12-06 00:05:39.831 RESETSAHARASTATEMACHINE:False
2020-12-06 00:05:39.831 SAHARAREADSERIALNO:False
2020-12-06 00:05:39.831 SEARCHPATH:E:\STAR\FirmwareX.Net_WW_ZS630KL_16.1220.1
906.167_M3.6.17.27_Phone-user.raw
2020-12-06 00:05:39.831 RAWPROGRAM:
2020-12-06 00:05:39.831 rawprogram0.xml
2020-12-06 00:05:39.831 rawprogram1.xml
2020-12-06 00:05:39.831 rawprogram2.xml
2020-12-06 00:05:39.831 rawprogram3.xml
2020-12-06 00:05:39.831 rawprogram4.xml
2020-12-06 00:05:39.831 rawprogram5.xml
2020-12-06 00:05:39.832 PATCH:
2020-12-06 00:05:39.832 patch0.xml
2020-12-06 00:05:39.832 patch1.xml
2020-12-06 00:05:39.832 patch2.xml
2020-12-06 00:05:39.832 patch3.xml
2020-12-06 00:05:39.833 patch4.xml
2020-12-06 00:05:39.833 patch5.xml
2020-12-06 00:05:39.833 ACKRAWDATAEVERYNUMPACKETS:False
2020-12-06 00:05:39.834 ACKRAWDATAEVERYNUMPACKETS:100
2020-12-06 00:05:39.834 MAXPAYLOADSIZETOTARGETINBYTES:True
2020-12-06 00:05:39.834 MAXPAYLOADSIZETOTARGETINBYTES:49152
2020-12-06 00:05:39.834 DEVICETYPE:ufs
2020-12-06 00:05:39.834 PLATFORM:8x26
2020-12-06 00:05:39.834 VALIDATIONMODE:0
2020-12-06 00:05:39.834 RESETAFTERDOWNLOAD:True
2020-12-06 00:05:39.834 MAXDIGESTTABLESIZE:8192
2020-12-06 00:05:39.835 SWITCHTOFIREHOSETIMEOUT:50
2020-12-06 00:05:39.835 RESETTIMEOUT:500
2020-12-06 00:05:39.835 RESETDELAYTIME:5
2020-12-06 00:05:39.835 METABUILD:
2020-12-06 00:05:39.835 METABUILD:
2020-12-06 00:05:39.835 FLATBUILDPATH:C:\
2020-12-06 00:05:39.835 FLATBUILDFORCEOVERRIDE:True
2020-12-06 00:05:39.835 QCNPATH:C:\Temp\00000000.qcn
2020-12-06 00:05:39.835 QCNAUTOBACKUPRESTORE:False
2020-12-06 00:05:39.835 SPCCODE:000000
2020-12-06 00:05:39.836 ENABLEMULTISIM:False
2020-12-06 00:05:39.836 AUTOPRESERVEPARTITIONS:False
2020-12-06 00:05:39.836 PARTITIONPRESERVEMODE:0
2020-12-06 00:05:39.836 PRESERVEDPARTITIONS:0
2020-12-06 00:05:39.836 PRESERVEDPARTITIONS:
2020-12-06 00:05:39.837 ERASEALL:False
2020-12-06 00:05:39.837 Load ARG Configuration
2020-12-06 00:05:39.837 COM:20
2020-12-06 00:05:39.837 PROGRAMMER:True
2020-12-06 00:05:39.837 PROGRAMMER:E:\STAR\FirmwareX.Net_WW_ZS630KL_16.1220.1
906.167_M3.6.17.27_Phone-user.raw\prog_firehose_ddr.elf
2020-12-06 00:05:39.838 SEARCHPATH:E:\STAR\FirmwareX.Net_WW_ZS630KL_16.1220.1
906.167_M3.6.17.27_Phone-user.raw
2020-12-06 00:05:39.838 RAWPROGRAM:
2020-12-06 00:05:39.838 rawprogram0.xml
2020-12-06 00:05:39.838 rawprogram1.xml
2020-12-06 00:05:39.838 rawprogram2.xml
2020-12-06 00:05:39.838 rawprogram3.xml
2020-12-06 00:05:39.838 rawprogram4.xml
2020-12-06 00:05:39.838 rawprogram5.xml
2020-12-06 00:05:39.838 PATCH:
2020-12-06 00:05:39.838 patch0.xml
2020-12-06 00:05:39.838 patch1.xml
2020-12-06 00:05:39.838 patch2.xml
2020-12-06 00:05:39.838 patch3.xml
2020-12-06 00:05:39.839 patch4.xml
2020-12-06 00:05:39.839 patch5.xml
2020-12-06 00:05:39.839 MAXPAYLOADSIZETOTARGETINBYTES:True
2020-12-06 00:05:39.839 MAXPAYLOADSIZETOTARGETINBYTES:49152
2020-12-06 00:05:39.839 DEVICETYPE:UFS
2020-12-06 00:05:39.839 RESETAFTERDOWNLOAD:True
2020-12-06 00:05:39.839 SWITCHTOFIREHOSETIMEOUT:50
2020-12-06 00:05:39.839 RESETTIMEOUT:500
2020-12-06 00:05:39.839 RESETDELAYTIME:5
2020-12-06 00:05:39.862 Validating Download Configuration
2020-12-06 00:05:39.865 Image Search Path: E:\STAR\FirmwareX.Net_WW_ZS630KL_1
6.1220.1906.167_M3.6.17.27_Phone-user.raw
2020-12-06 00:05:39.868 RAWPROGRAM file path: E:\STAR\FirmwareX.Net_WW_ZS630K
L_16.1220.1906.167_M3.6.17.27_Phone-user.raw\rawprogram0.xml
2020-12-06 00:05:39.869 RAWPROGRAM file path: E:\STAR\FirmwareX.Net_WW_ZS630K
L_16.1220.1906.167_M3.6.17.27_Phone-user.raw\rawprogram1.xml
2020-12-06 00:05:39.869 RAWPROGRAM file path: E:\STAR\FirmwareX.Net_WW_ZS630K
L_16.1220.1906.167_M3.6.17.27_Phone-user.raw\rawprogram2.xml
2020-12-06 00:05:39.869 RAWPROGRAM file path: E:\STAR\FirmwareX.Net_WW_ZS630K
L_16.1220.1906.167_M3.6.17.27_Phone-user.raw\rawprogram3.xml
2020-12-06 00:05:39.869 RAWPROGRAM file path: E:\STAR\FirmwareX.Net_WW_ZS630K
L_16.1220.1906.167_M3.6.17.27_Phone-user.raw\rawprogram4.xml
2020-12-06 00:05:39.869 RAWPROGRAM file path: E:\STAR\FirmwareX.Net_WW_ZS630K
L_16.1220.1906.167_M3.6.17.27_Phone-user.raw\rawprogram5.xml
2020-12-06 00:05:39.869 PATCH file path:E:\STAR\FirmwareX.Net_WW_ZS630KL_16.1
220.1906.167_M3.6.17.27_Phone-user.raw\patch0.xml
2020-12-06 00:05:39.869 PATCH file path:E:\STAR\FirmwareX.Net_WW_ZS630KL_16.1
220.1906.167_M3.6.17.27_Phone-user.raw\patch1.xml
2020-12-06 00:05:39.869 PATCH file path:E:\STAR\FirmwareX.Net_WW_ZS630KL_16.1
220.1906.167_M3.6.17.27_Phone-user.raw\patch2.xml
2020-12-06 00:05:39.869 PATCH file path:E:\STAR\FirmwareX.Net_WW_ZS630KL_16.1
220.1906.167_M3.6.17.27_Phone-user.raw\patch3.xml
2020-12-06 00:05:39.869 PATCH file path:E:\STAR\FirmwareX.Net_WW_ZS630KL_16.1
220.1906.167_M3.6.17.27_Phone-user.raw\patch4.xml
2020-12-06 00:05:39.869 PATCH file path:E:\STAR\FirmwareX.Net_WW_ZS630KL_16.1
220.1906.167_M3.6.17.27_Phone-user.raw\patch5.xml
2020-12-06 00:05:39.870 Programmer Path:E:\STAR\FirmwareX.Net_WW_ZS630KL_16.1
220.1906.167_M3.6.17.27_Phone-user.raw\prog_firehose_ddr.elf
2020-12-06 00:05:39.909 QFIL version: 2.0.2.1
2020-12-06 00:05:39.936 Start Download
2020-12-06 00:05:39.943 Program Path:E:\STAR\FirmwareX.Net_WW_ZS630KL_16.1220
.1906.167_M3.6.17.27_Phone-user.raw\prog_firehose_ddr.elf
2020-12-06 00:05:39.948 ***** Working Folder:C:\Users\gh\AppData\Roaming\Qual
comm\QFIL\COMPORT_20
2020-12-06 00:07:09.992 Binary build date: Apr 27 2018 @ 03:04:33
2020-12-06 00:07:09.992 QSAHARASERVER CALLED LIKE THIS: 'E:\STAR\FirmwareX.Ne
t_WW_ZS630KL_16.1220.1906.167_M3.6.17.27_Phone-user.raw\QSaharaServer.ex'Current
working dir: C:\Users\gh\AppData\Roaming\Qualcomm\QFIL\COMPORT_20
2020-12-06 00:07:09.994 Sahara mappings:
2020-12-06 00:07:09.996 2: amss.mbn
2020-12-06 00:07:09.996 6: apps.mbn
2020-12-06 00:07:09.997 8: dsp1.mbn
2020-12-06 00:07:09.998 10: dbl.mbn
2020-12-06 00:07:09.998 11: osbl.mbn
2020-12-06 00:07:09.999 12: dsp2.mbn
2020-12-06 00:07:10.000 16: efs1.mbn
2020-12-06 00:07:10.001 17: efs2.mbn
2020-12-06 00:07:10.001 20: efs3.mbn
2020-12-06 00:07:10.002 21: sbl1.mbn
2020-12-06 00:07:10.003 22: sbl2.mbn
2020-12-06 00:07:10.004 23: rpm.mbn
2020-12-06 00:07:10.005 25: tz.mbn
2020-12-06 00:07:10.006 28: dsp3.mbn
2020-12-06 00:07:10.007 29: acdb.mbn
2020-12-06 00:07:10.008 30: wdt.mbn
2020-12-06 00:07:10.008 31: mba.mbn
2020-12-06 00:07:10.011 13: E:\STAR\FirmwareX.Net_WW_ZS630KL_16.1220.1906.167
_M3.6.17.27_Phone-user.raw\prog_firehose_ddr.elf
2020-12-06 00:07:10.011
2020-12-06 00:07:10.012 00:07:09: ERROR: function: sahara_rx_data:277 Unable
to read packet header. Only read 0 bytes.
2020-12-06 00:07:10.014
2020-12-06 00:07:10.014 00:07:09: ERROR: function: sahara_main:983 Sahara pro
tocol error
2020-12-06 00:07:10.015
2020-12-06 00:07:10.016 00:07:09: ERROR: function: main:320 Uploading Image
using Sahara protocol failed
2020-12-06 00:07:10.017
2020-12-06 00:07:10.017
2020-12-06 00:07:10.020 Download Fail:Sahara Fail:QSaharaServer Fail:process
fail
2020-12-06 00:07:10.021 Finish Download
2020-12-06 00:07:10.020 Download Fail:Sahara Fail:QSaharaServer Fail:process
fail
press any key to continue . . .
Press any key to continue . . .

I'm having the exact same error, has anyone found a solution to this?

I've tried using test mode and a bunch of other solutions online but nothing seems to work. It's driving me crazy, any help would be much appreciated.
 

bythelaw

Senior Member
Aug 1, 2015
121
24
I followed every steps but there is a issue Please Help

Start ufs flat download . . .
Loading parameters may takes few minutes, please wait...
2020-12-06 00:05:39.804 MODE:3
2020-12-06 00:05:39.812 LOGFILEPATH:E:\STAR\FirmwareX.Net_WW_ZS630KL_16.1220.
1906.167_M3.6.17.27_Phone-user.raw\test1.txt
2020-12-06 00:05:39.813 Validating Application Configuration
2020-12-06 00:05:39.821 Load APP Configuration
2020-12-06 00:05:39.830 COM:3
2020-12-06 00:05:39.830 PBLDOWNLOADPROTOCOL:0
2020-12-06 00:05:39.831 PROGRAMMER:True
2020-12-06 00:05:39.831 PROGRAMMER:E:\STAR\FirmwareX.Net_WW_ZS630KL_16.1220.1
906.167_M3.6.17.27_Phone-user.raw\prog_firehose_ddr.elf
2020-12-06 00:05:39.831 RESETSAHARASTATEMACHINE:False
2020-12-06 00:05:39.831 SAHARAREADSERIALNO:False
2020-12-06 00:05:39.831 SEARCHPATH:E:\STAR\FirmwareX.Net_WW_ZS630KL_16.1220.1
906.167_M3.6.17.27_Phone-user.raw
2020-12-06 00:05:39.831 RAWPROGRAM:
2020-12-06 00:05:39.831 rawprogram0.xml
2020-12-06 00:05:39.831 rawprogram1.xml
2020-12-06 00:05:39.831 rawprogram2.xml
2020-12-06 00:05:39.831 rawprogram3.xml
2020-12-06 00:05:39.831 rawprogram4.xml
2020-12-06 00:05:39.831 rawprogram5.xml
2020-12-06 00:05:39.832 PATCH:
2020-12-06 00:05:39.832 patch0.xml
2020-12-06 00:05:39.832 patch1.xml
2020-12-06 00:05:39.832 patch2.xml
2020-12-06 00:05:39.832 patch3.xml
2020-12-06 00:05:39.833 patch4.xml
2020-12-06 00:05:39.833 patch5.xml
2020-12-06 00:05:39.833 ACKRAWDATAEVERYNUMPACKETS:False
2020-12-06 00:05:39.834 ACKRAWDATAEVERYNUMPACKETS:100
2020-12-06 00:05:39.834 MAXPAYLOADSIZETOTARGETINBYTES:True
2020-12-06 00:05:39.834 MAXPAYLOADSIZETOTARGETINBYTES:49152
2020-12-06 00:05:39.834 DEVICETYPE:ufs
2020-12-06 00:05:39.834 PLATFORM:8x26
2020-12-06 00:05:39.834 VALIDATIONMODE:0
2020-12-06 00:05:39.834 RESETAFTERDOWNLOAD:True
2020-12-06 00:05:39.834 MAXDIGESTTABLESIZE:8192
2020-12-06 00:05:39.835 SWITCHTOFIREHOSETIMEOUT:50
2020-12-06 00:05:39.835 RESETTIMEOUT:500
2020-12-06 00:05:39.835 RESETDELAYTIME:5
2020-12-06 00:05:39.835 METABUILD:
2020-12-06 00:05:39.835 METABUILD:
2020-12-06 00:05:39.835 FLATBUILDPATH:C:\
2020-12-06 00:05:39.835 FLATBUILDFORCEOVERRIDE:True
2020-12-06 00:05:39.835 QCNPATH:C:\Temp\00000000.qcn
2020-12-06 00:05:39.835 QCNAUTOBACKUPRESTORE:False
2020-12-06 00:05:39.835 SPCCODE:000000
2020-12-06 00:05:39.836 ENABLEMULTISIM:False
2020-12-06 00:05:39.836 AUTOPRESERVEPARTITIONS:False
2020-12-06 00:05:39.836 PARTITIONPRESERVEMODE:0
2020-12-06 00:05:39.836 PRESERVEDPARTITIONS:0
2020-12-06 00:05:39.836 PRESERVEDPARTITIONS:
2020-12-06 00:05:39.837 ERASEALL:False
2020-12-06 00:05:39.837 Load ARG Configuration
2020-12-06 00:05:39.837 COM:20
2020-12-06 00:05:39.837 PROGRAMMER:True
2020-12-06 00:05:39.837 PROGRAMMER:E:\STAR\FirmwareX.Net_WW_ZS630KL_16.1220.1
906.167_M3.6.17.27_Phone-user.raw\prog_firehose_ddr.elf
2020-12-06 00:05:39.838 SEARCHPATH:E:\STAR\FirmwareX.Net_WW_ZS630KL_16.1220.1
906.167_M3.6.17.27_Phone-user.raw
2020-12-06 00:05:39.838 RAWPROGRAM:
2020-12-06 00:05:39.838 rawprogram0.xml
2020-12-06 00:05:39.838 rawprogram1.xml
2020-12-06 00:05:39.838 rawprogram2.xml
2020-12-06 00:05:39.838 rawprogram3.xml
2020-12-06 00:05:39.838 rawprogram4.xml
2020-12-06 00:05:39.838 rawprogram5.xml
2020-12-06 00:05:39.838 PATCH:
2020-12-06 00:05:39.838 patch0.xml
2020-12-06 00:05:39.838 patch1.xml
2020-12-06 00:05:39.838 patch2.xml
2020-12-06 00:05:39.838 patch3.xml
2020-12-06 00:05:39.839 patch4.xml
2020-12-06 00:05:39.839 patch5.xml
2020-12-06 00:05:39.839 MAXPAYLOADSIZETOTARGETINBYTES:True
2020-12-06 00:05:39.839 MAXPAYLOADSIZETOTARGETINBYTES:49152
2020-12-06 00:05:39.839 DEVICETYPE:UFS
2020-12-06 00:05:39.839 RESETAFTERDOWNLOAD:True
2020-12-06 00:05:39.839 SWITCHTOFIREHOSETIMEOUT:50
2020-12-06 00:05:39.839 RESETTIMEOUT:500
2020-12-06 00:05:39.839 RESETDELAYTIME:5
2020-12-06 00:05:39.862 Validating Download Configuration
2020-12-06 00:05:39.865 Image Search Path: E:\STAR\FirmwareX.Net_WW_ZS630KL_1
6.1220.1906.167_M3.6.17.27_Phone-user.raw
2020-12-06 00:05:39.868 RAWPROGRAM file path: E:\STAR\FirmwareX.Net_WW_ZS630K
L_16.1220.1906.167_M3.6.17.27_Phone-user.raw\rawprogram0.xml
2020-12-06 00:05:39.869 RAWPROGRAM file path: E:\STAR\FirmwareX.Net_WW_ZS630K
L_16.1220.1906.167_M3.6.17.27_Phone-user.raw\rawprogram1.xml
2020-12-06 00:05:39.869 RAWPROGRAM file path: E:\STAR\FirmwareX.Net_WW_ZS630K
L_16.1220.1906.167_M3.6.17.27_Phone-user.raw\rawprogram2.xml
2020-12-06 00:05:39.869 RAWPROGRAM file path: E:\STAR\FirmwareX.Net_WW_ZS630K
L_16.1220.1906.167_M3.6.17.27_Phone-user.raw\rawprogram3.xml
2020-12-06 00:05:39.869 RAWPROGRAM file path: E:\STAR\FirmwareX.Net_WW_ZS630K
L_16.1220.1906.167_M3.6.17.27_Phone-user.raw\rawprogram4.xml
2020-12-06 00:05:39.869 RAWPROGRAM file path: E:\STAR\FirmwareX.Net_WW_ZS630K
L_16.1220.1906.167_M3.6.17.27_Phone-user.raw\rawprogram5.xml
2020-12-06 00:05:39.869 PATCH file path:E:\STAR\FirmwareX.Net_WW_ZS630KL_16.1
220.1906.167_M3.6.17.27_Phone-user.raw\patch0.xml
2020-12-06 00:05:39.869 PATCH file path:E:\STAR\FirmwareX.Net_WW_ZS630KL_16.1
220.1906.167_M3.6.17.27_Phone-user.raw\patch1.xml
2020-12-06 00:05:39.869 PATCH file path:E:\STAR\FirmwareX.Net_WW_ZS630KL_16.1
220.1906.167_M3.6.17.27_Phone-user.raw\patch2.xml
2020-12-06 00:05:39.869 PATCH file path:E:\STAR\FirmwareX.Net_WW_ZS630KL_16.1
220.1906.167_M3.6.17.27_Phone-user.raw\patch3.xml
2020-12-06 00:05:39.869 PATCH file path:E:\STAR\FirmwareX.Net_WW_ZS630KL_16.1
220.1906.167_M3.6.17.27_Phone-user.raw\patch4.xml
2020-12-06 00:05:39.869 PATCH file path:E:\STAR\FirmwareX.Net_WW_ZS630KL_16.1
220.1906.167_M3.6.17.27_Phone-user.raw\patch5.xml
2020-12-06 00:05:39.870 Programmer Path:E:\STAR\FirmwareX.Net_WW_ZS630KL_16.1
220.1906.167_M3.6.17.27_Phone-user.raw\prog_firehose_ddr.elf
2020-12-06 00:05:39.909 QFIL version: 2.0.2.1
2020-12-06 00:05:39.936 Start Download
2020-12-06 00:05:39.943 Program Path:E:\STAR\FirmwareX.Net_WW_ZS630KL_16.1220
.1906.167_M3.6.17.27_Phone-user.raw\prog_firehose_ddr.elf
2020-12-06 00:05:39.948 ***** Working Folder:C:\Users\gh\AppData\Roaming\Qual
comm\QFIL\COMPORT_20
2020-12-06 00:07:09.992 Binary build date: Apr 27 2018 @ 03:04:33
2020-12-06 00:07:09.992 QSAHARASERVER CALLED LIKE THIS: 'E:\STAR\FirmwareX.Ne
t_WW_ZS630KL_16.1220.1906.167_M3.6.17.27_Phone-user.raw\QSaharaServer.ex'Current
working dir: C:\Users\gh\AppData\Roaming\Qualcomm\QFIL\COMPORT_20
2020-12-06 00:07:09.994 Sahara mappings:
2020-12-06 00:07:09.996 2: amss.mbn
2020-12-06 00:07:09.996 6: apps.mbn
2020-12-06 00:07:09.997 8: dsp1.mbn
2020-12-06 00:07:09.998 10: dbl.mbn
2020-12-06 00:07:09.998 11: osbl.mbn
2020-12-06 00:07:09.999 12: dsp2.mbn
2020-12-06 00:07:10.000 16: efs1.mbn
2020-12-06 00:07:10.001 17: efs2.mbn
2020-12-06 00:07:10.001 20: efs3.mbn
2020-12-06 00:07:10.002 21: sbl1.mbn
2020-12-06 00:07:10.003 22: sbl2.mbn
2020-12-06 00:07:10.004 23: rpm.mbn
2020-12-06 00:07:10.005 25: tz.mbn
2020-12-06 00:07:10.006 28: dsp3.mbn
2020-12-06 00:07:10.007 29: acdb.mbn
2020-12-06 00:07:10.008 30: wdt.mbn
2020-12-06 00:07:10.008 31: mba.mbn
2020-12-06 00:07:10.011 13: E:\STAR\FirmwareX.Net_WW_ZS630KL_16.1220.1906.167
_M3.6.17.27_Phone-user.raw\prog_firehose_ddr.elf
2020-12-06 00:07:10.011
2020-12-06 00:07:10.012 00:07:09: ERROR: function: sahara_rx_data:277 Unable
to read packet header. Only read 0 bytes.
2020-12-06 00:07:10.014
2020-12-06 00:07:10.014 00:07:09: ERROR: function: sahara_main:983 Sahara pro
tocol error
2020-12-06 00:07:10.015
2020-12-06 00:07:10.016 00:07:09: ERROR: function: main:320 Uploading Image
using Sahara protocol failed
2020-12-06 00:07:10.017
2020-12-06 00:07:10.017
2020-12-06 00:07:10.020 Download Fail:Sahara Fail:QSaharaServer Fail:process
fail
2020-12-06 00:07:10.021 Finish Download
2020-12-06 00:07:10.020 Download Fail:Sahara Fail:QSaharaServer Fail:process
fail
press any key to continue . . .
Press any key to continue . . .
I'm having the exact same error, has anyone found a solution to this?

I've tried using test mode and a bunch of other solutions online but nothing seems to work. It's driving me crazy, any help would be much appreciated.


Hey, I had this exact error, same dull blinking issue. i just got the device booted to fastboot mode now, using this method. the error messagese arent clear using the stock qdil flasher. i used mi flash tool to do it, it said that the connection had timed out on mi flasher, i just had to flash as soon as got into qdil mode. it worked. everything flashed, im up and running.! any queries i will answer, i almost had a heart attack , i can understand a similar state of yall too
 

shubhworld

Member
Mar 1, 2021
14
0
Hey, I had this exact error, same dull blinking issue. i just got the device booted to fastboot mode now, using this method. the error messagese arent clear using the stock qdil flasher. i used mi flash tool to do it, it said that the connection had timed out on mi flasher, i just had to flash as soon as got into qdil mode. it worked. everything flashed, im up and running.! any queries i will answer, i almost had a heart attack , i can understand a similar state of yall too

Can you please suggest the steps using MI Flasher tool ?
 

shubhworld

Member
Mar 1, 2021
14
0
I have managed to cross this

Open the folder into which you have unpacked the firmware files. Then, execute update_image_EDL.bat script.

but phone is still not turning on and I am unable to execute tart flashall_AFT.cmd

can anyone help?
 

1poweruser1

Member
Jul 21, 2020
35
2
I have managed to cross this

Open the folder into which you have unpacked the firmware files. Then, execute update_image_EDL.bat script.

but phone is still not turning on and I am unable to execute tart flashall_AFT.cmd

can anyone help?
after edl script finishes without errors, phone should boot in ~15 seconds in bootloader/fastboot. When it does, run flashall script
 

shubhworld

Member
Mar 1, 2021
14
0
yes

can u try running edl script from 176 service fw and post the terminal log here?
Thanks here is the log

Code:
07:37:34: INFO: FH_LOADER WAS CALLED EXACTLY LIKE THIS
************************************************
E:\Downloads\Asus ZenPC\2009176rawfirm\fh_loader.exe --port=\\.\COM3 --reset --noprompt --showpercentagecomplete --maxpayloadsizeinbytes=49152 --zlpawarehost=1 --memoryname=ufs
************************************************

07:37:34: DEBUG: Binary build date: Apr 27 2018 @ 03:04:29

07:37:34: DEBUG: Build Version: 18.04.27.03.04.29

07:37:34: INFO: Current working dir (cwd): C:\Users\p\AppData\Roaming\Qualcomm\QFIL\COMPORT_3\
07:37:34: INFO: Showing network mappings to allow debugging
07:37:34: DEBUG: New connections will be remembered.

07:37:34: DEBUG:

07:37:34: DEBUG: There are no entries in the list.

07:37:34: DEBUG:

07:37:34: DEBUG: User set MaxPayloadSizeToTargetInBytes to 49152

07:37:34: DEBUG: User set ZLPAWAREHOST to 1

07:37:34: INFO: User wants to talk to port '\\.\COM3'
07:37:34: DEBUG: port_fd=0xD4

07:37:34: INFO: Took       0.01600000 seconds to open port
07:37:34: INFO: Sorting TAGS to ensure order is <configure>,<erase>, others, <patch>,<power>
07:37:34: INFO: If  you don't want this, use --dontsorttags

07:37:34: INFO: Sending <configure>
07:37:34: DEBUG: CHANNEL DATA (P0000) (H00202) (    225 bytes) - HOST TO TARGET -->
===========================================================================================================
<?xml version="1.0" encoding="UTF-8" ?>
<data>
<configure MemoryName="ufs" Verbose="0" AlwaysValidate="0" MaxDigestTableSizeInBytes="8192" MaxPayloadSizeToTargetInBytes="49152" ZlpAwareHost="1" SkipStorageInit="0" />
</data>

============================================================================================================

07:37:34: DEBUG: CharsInBuffer=0 Trying to read from USB 8192 bytes
07:37:34: DEBUG: CHANNEL DATA (487 bytes) <-- TARGET to HOST
07:37:34: DEBUG: CharsInBuffer = 487
07:37:34: DEBUG: printBuffer:5981 PRETTYPRINT Buffer is 487 bytes

07:37:34: DEBUG: printBuffer:6058 3C 3F 78 6D 6C 20 76 65 72 73 69 6F 6E 3D 22 31 <?xml version="1
07:37:34: DEBUG: printBuffer:6058 2E 30 22 20 65 6E 63 6F 64 69 6E 67 3D 22 55 54 .0" encoding="UT
07:37:34: DEBUG: printBuffer:6058 46 2D 38 22 20 3F 3E 0A 3C 64 61 74 61 3E 0A 3C F-8" ?>.<data>.<
07:37:34: DEBUG: printBuffer:6058 6C 6F 67 20 76 61 6C 75 65 3D 22 49 4E 46 4F 3A log value="INFO:
07:37:34: DEBUG: printBuffer:6058 20 43 61 6C 6C 69 6E 67 20 68 61 6E 64 6C 65 72  Calling handler
07:37:34: DEBUG: printBuffer:6058 20 66 6F 72 20 63 6F 6E 66 69 67 75 72 65 22 20  for configure"
07:37:34: DEBUG: printBuffer:6058 2F 3E 3C 2F 64 61 74 61 3E 3C 3F 78 6D 6C 20 76 /></data><?xml v
07:37:34: DEBUG: printBuffer:6058 65 72 73 69 6F 6E 3D 22 31 2E 30 22 20 65 6E 63 ersion="1.0" enc
07:37:34: DEBUG: printBuffer:6058 6F 64 69 6E 67 3D 22 55 54 46 2D 38 22 20 3F 3E oding="UTF-8" ?>
07:37:34: DEBUG: printBuffer:6058 0A 3C 64 61 74 61 3E 0A 3C 6C 6F 67 20 76 61 6C .<data>.<log val
07:37:34: DEBUG: printBuffer:6058 75 65 3D 22 49 4E 46 4F 3A 20 53 74 6F 72 61 67 ue="INFO: Storag
07:37:34: DEBUG: printBuffer:6058 65 20 74 79 70 65 20 73 65 74 20 74 6F 20 76 61 e type set to va
07:37:34: DEBUG: printBuffer:6058 6C 75 65 20 55 46 53 22 20 2F 3E 3C 2F 64 61 74 lue UFS" /></dat
07:37:34: DEBUG: printBuffer:6058 61 3E 3C 3F 78 6D 6C 20 76 65 72 73 69 6F 6E 3D a><?xml version=
07:37:34: DEBUG: printBuffer:6058 22 31 2E 30 22 20 65 6E 63 6F 64 69 6E 67 3D 22 "1.0" encoding="
07:37:34: DEBUG: printBuffer:6058 55 54 46 2D 38 22 20 3F 3E 0A 3C 64 61 74 61 3E UTF-8" ?>.<data>
07:37:34: DEBUG: printBuffer:6058 0A 3C 72 65 73 70 6F 6E 73 65 20 76 61 6C 75 65 .<response value
07:37:34: DEBUG: printBuffer:6058 3D 22 41 43 4B 22 20 4D 65 6D 6F 72 79 4E 61 6D ="ACK" MemoryNam
07:37:34: DEBUG: printBuffer:6058 65 3D 22 55 46 53 22 20 4D 69 6E 56 65 72 73 69 e="UFS" MinVersi
07:37:34: DEBUG: printBuffer:6058 6F 6E 53 75 70 70 6F 72 74 65 64 3D 22 31 22 20 onSupported="1"
07:37:34: DEBUG: printBuffer:6058 56 65 72 73 69 6F 6E 3D 22 31 22 20 4D 61 78 50 Version="1" MaxP
07:37:34: DEBUG: printBuffer:6058 61 79 6C 6F 61 64 53 69 7A 65 54 6F 54 61 72 67 ayloadSizeToTarg
07:37:34: DEBUG: printBuffer:6058 65 74 49 6E 42 79 74 65 73 3D 22 34 39 31 35 32 etInBytes="49152
07:37:34: DEBUG: printBuffer:6058 22 20 4D 61 78 50 61 79 6C 6F 61 64 53 69 7A 65 " MaxPayloadSize
07:37:34: DEBUG: printBuffer:6058 54 6F 54 61 72 67 65 74 49 6E 42 79 74 65 73 53 ToTargetInBytesS
07:37:34: DEBUG: printBuffer:6058 75 70 70 6F 72 74 65 64 3D 22 31 30 34 38 35 37 upported="104857
07:37:34: DEBUG: printBuffer:6058 36 22 20 4D 61 78 58 4D 4C 53 69 7A 65 49 6E 42 6" MaxXMLSizeInB
07:37:34: DEBUG: printBuffer:6058 79 74 65 73 3D 22 34 30 39 36 22 20 44 61 74 65 ytes="4096" Date
07:37:34: DEBUG: printBuffer:6058 54 69 6D 65 3D 22 4F 63 74 20 32 35 20 32 30 31 Time="Oct 25 201
07:37:34: DEBUG: printBuffer:6058 38 20 2D 20 31 33 3A 34 38 3A 31 30 22 20 2F 3E 8 - 13:48:10" />
07:37:34: DEBUG: printBuffer:6058 3C 2F 64 61 74 61 3E                            </data>
07:37:34: DEBUG: printBuffer:6071


07:37:34: DEBUG: XML FILE (105 bytes): CharsInBuffer=487-105=382
-------------------------------------------------------------------------------------------
<?xml version="1.0" encoding="UTF-8" ?>
<data>
<log value="INFO: Calling handler for configure" /></data>
-------------------------------------------------------------------------------------------

07:37:34: INFO: TARGET SAID: 'INFO: Calling handler for configure'
07:37:34: DEBUG: XML FILE (105 bytes): CharsInBuffer=382-105=277
-------------------------------------------------------------------------------------------
<?xml version="1.0" encoding="UTF-8" ?>
<data>
<log value="INFO: Storage type set to value UFS" /></data>
-------------------------------------------------------------------------------------------

07:37:34: INFO: TARGET SAID: 'INFO: Storage type set to value UFS'
07:37:34: DEBUG: XML FILE (277 bytes): CharsInBuffer=277-277=0
-------------------------------------------------------------------------------------------
<?xml version="1.0" encoding="UTF-8" ?>
<data>
<response value="ACK" MemoryName="UFS" MinVersionSupported="1" Version="1" MaxPayloadSizeToTargetInBytes="49152" MaxPayloadSizeToTargetInBytesSupported="1048576" MaxXMLSizeInBytes="4096" DateTime="Oct 25 2018 - 13:48:10" /></data>
-------------------------------------------------------------------------------------------

07:37:34: DEBUG: Response was 'ACK'
07:37:34: INFO: fh.attrs.MaxPayloadSizeToTargetInBytes = 49152
07:37:34: INFO: fh.attrs.MaxPayloadSizeToTargetInBytesSupported = 1048576
07:37:34: DEBUG: Got the ACK for the <configure>
07:37:34: INFO: Sending <configure>
07:37:34: DEBUG: CHANNEL DATA (P0001) (H00203) (    227 bytes) - HOST TO TARGET -->
===========================================================================================================
<?xml version="1.0" encoding="UTF-8" ?>
<data>
<configure MemoryName="UFS" Verbose="0" AlwaysValidate="0" MaxDigestTableSizeInBytes="8192" MaxPayloadSizeToTargetInBytes="1048576" ZlpAwareHost="1" SkipStorageInit="0" />
</data>

============================================================================================================

07:37:34: DEBUG: CharsInBuffer=0 Trying to read from USB 8192 bytes
07:37:34: DEBUG: CHANNEL DATA (489 bytes) <-- TARGET to HOST
07:37:34: DEBUG: CharsInBuffer = 489
07:37:34: DEBUG: printBuffer:5981 PRETTYPRINT Buffer is 489 bytes

07:37:34: DEBUG: printBuffer:6058 3C 3F 78 6D 6C 20 76 65 72 73 69 6F 6E 3D 22 31 <?xml version="1
07:37:34: DEBUG: printBuffer:6058 2E 30 22 20 65 6E 63 6F 64 69 6E 67 3D 22 55 54 .0" encoding="UT
07:37:34: DEBUG: printBuffer:6058 46 2D 38 22 20 3F 3E 0A 3C 64 61 74 61 3E 0A 3C F-8" ?>.<data>.<
07:37:34: DEBUG: printBuffer:6058 6C 6F 67 20 76 61 6C 75 65 3D 22 49 4E 46 4F 3A log value="INFO:
07:37:34: DEBUG: printBuffer:6058 20 43 61 6C 6C 69 6E 67 20 68 61 6E 64 6C 65 72  Calling handler
07:37:34: DEBUG: printBuffer:6058 20 66 6F 72 20 63 6F 6E 66 69 67 75 72 65 22 20  for configure"
07:37:34: DEBUG: printBuffer:6058 2F 3E 3C 2F 64 61 74 61 3E 3C 3F 78 6D 6C 20 76 /></data><?xml v
07:37:34: DEBUG: printBuffer:6058 65 72 73 69 6F 6E 3D 22 31 2E 30 22 20 65 6E 63 ersion="1.0" enc
07:37:34: DEBUG: printBuffer:6058 6F 64 69 6E 67 3D 22 55 54 46 2D 38 22 20 3F 3E oding="UTF-8" ?>
07:37:34: DEBUG: printBuffer:6058 0A 3C 64 61 74 61 3E 0A 3C 6C 6F 67 20 76 61 6C .<data>.<log val
07:37:34: DEBUG: printBuffer:6058 75 65 3D 22 49 4E 46 4F 3A 20 53 74 6F 72 61 67 ue="INFO: Storag
07:37:34: DEBUG: printBuffer:6058 65 20 74 79 70 65 20 73 65 74 20 74 6F 20 76 61 e type set to va
07:37:34: DEBUG: printBuffer:6058 6C 75 65 20 55 46 53 22 20 2F 3E 3C 2F 64 61 74 lue UFS" /></dat
07:37:34: DEBUG: printBuffer:6058 61 3E 3C 3F 78 6D 6C 20 76 65 72 73 69 6F 6E 3D a><?xml version=
07:37:34: DEBUG: printBuffer:6058 22 31 2E 30 22 20 65 6E 63 6F 64 69 6E 67 3D 22 "1.0" encoding="
07:37:34: DEBUG: printBuffer:6058 55 54 46 2D 38 22 20 3F 3E 0A 3C 64 61 74 61 3E UTF-8" ?>.<data>
07:37:34: DEBUG: printBuffer:6058 0A 3C 72 65 73 70 6F 6E 73 65 20 76 61 6C 75 65 .<response value
07:37:34: DEBUG: printBuffer:6058 3D 22 41 43 4B 22 20 4D 65 6D 6F 72 79 4E 61 6D ="ACK" MemoryNam
07:37:34: DEBUG: printBuffer:6058 65 3D 22 55 46 53 22 20 4D 69 6E 56 65 72 73 69 e="UFS" MinVersi
07:37:34: DEBUG: printBuffer:6058 6F 6E 53 75 70 70 6F 72 74 65 64 3D 22 31 22 20 onSupported="1"
07:37:34: DEBUG: printBuffer:6058 56 65 72 73 69 6F 6E 3D 22 31 22 20 4D 61 78 50 Version="1" MaxP
07:37:34: DEBUG: printBuffer:6058 61 79 6C 6F 61 64 53 69 7A 65 54 6F 54 61 72 67 ayloadSizeToTarg
07:37:34: DEBUG: printBuffer:6058 65 74 49 6E 42 79 74 65 73 3D 22 31 30 34 38 35 etInBytes="10485
07:37:34: DEBUG: printBuffer:6058 37 36 22 20 4D 61 78 50 61 79 6C 6F 61 64 53 69 76" MaxPayloadSi
07:37:34: DEBUG: printBuffer:6058 7A 65 54 6F 54 61 72 67 65 74 49 6E 42 79 74 65 zeToTargetInByte
07:37:34: DEBUG: printBuffer:6058 73 53 75 70 70 6F 72 74 65 64 3D 22 31 30 34 38 sSupported="1048
07:37:34: DEBUG: printBuffer:6058 35 37 36 22 20 4D 61 78 58 4D 4C 53 69 7A 65 49 576" MaxXMLSizeI
07:37:34: DEBUG: printBuffer:6058 6E 42 79 74 65 73 3D 22 34 30 39 36 22 20 44 61 nBytes="4096" Da
07:37:34: DEBUG: printBuffer:6058 74 65 54 69 6D 65 3D 22 4F 63 74 20 32 35 20 32 teTime="Oct 25 2
07:37:34: DEBUG: printBuffer:6058 30 31 38 20 2D 20 31 33 3A 34 38 3A 31 30 22 20 018 - 13:48:10"
07:37:34: DEBUG: printBuffer:6058 2F 3E 3C 2F 64 61 74 61 3E                      /></data>
07:37:34: DEBUG: printBuffer:6071


07:37:34: DEBUG: XML FILE (105 bytes): CharsInBuffer=489-105=384
-------------------------------------------------------------------------------------------
<?xml version="1.0" encoding="UTF-8" ?>
<data>
<log value="INFO: Calling handler for configure" /></data>
-------------------------------------------------------------------------------------------

07:37:34: INFO: TARGET SAID: 'INFO: Calling handler for configure'
07:37:34: DEBUG: XML FILE (105 bytes): CharsInBuffer=384-105=279
-------------------------------------------------------------------------------------------
<?xml version="1.0" encoding="UTF-8" ?>
<data>
<log value="INFO: Storage type set to value UFS" /></data>
-------------------------------------------------------------------------------------------

07:37:34: INFO: TARGET SAID: 'INFO: Storage type set to value UFS'
07:37:34: DEBUG: XML FILE (279 bytes): CharsInBuffer=279-279=0
-------------------------------------------------------------------------------------------
<?xml version="1.0" encoding="UTF-8" ?>
<data>
<response value="ACK" MemoryName="UFS" MinVersionSupported="1" Version="1" MaxPayloadSizeToTargetInBytes="1048576" MaxPayloadSizeToTargetInBytesSupported="1048576" MaxXMLSizeInBytes="4096" DateTime="Oct 25 2018 - 13:48:10" /></data>
-------------------------------------------------------------------------------------------

07:37:34: DEBUG: Response was 'ACK'
07:37:34: INFO: fh.attrs.MaxPayloadSizeToTargetInBytes = 1048576
07:37:34: INFO: fh.attrs.MaxPayloadSizeToTargetInBytesSupported = 1048576
07:37:34: DEBUG: Got the ACK for the <configure>
07:37:34: INFO: Sending <power>
07:37:34: DEBUG: CHANNEL DATA (P0002) (H00204) (     99 bytes) - HOST TO TARGET -->
===========================================================================================================
<?xml version="1.0" encoding="UTF-8" ?>
<data>
<power DelayInSeconds="10" value="reset" />
</data>

============================================================================================================

07:37:34: DEBUG: CharsInBuffer=0 Trying to read from USB 8192 bytes
07:37:34: DEBUG: CHANNEL DATA (455 bytes) <-- TARGET to HOST
07:37:34: DEBUG: CharsInBuffer = 455
07:37:34: DEBUG: printBuffer:5981 PRETTYPRINT Buffer is 455 bytes

07:37:34: DEBUG: printBuffer:6058 3C 3F 78 6D 6C 20 76 65 72 73 69 6F 6E 3D 22 31 <?xml version="1
07:37:34: DEBUG: printBuffer:6058 2E 30 22 20 65 6E 63 6F 64 69 6E 67 3D 22 55 54 .0" encoding="UT
07:37:34: DEBUG: printBuffer:6058 46 2D 38 22 20 3F 3E 0A 3C 64 61 74 61 3E 0A 3C F-8" ?>.<data>.<
07:37:34: DEBUG: printBuffer:6058 6C 6F 67 20 76 61 6C 75 65 3D 22 49 4E 46 4F 3A log value="INFO:
07:37:34: DEBUG: printBuffer:6058 20 43 61 6C 6C 69 6E 67 20 68 61 6E 64 6C 65 72  Calling handler
07:37:34: DEBUG: printBuffer:6058 20 66 6F 72 20 70 6F 77 65 72 22 20 2F 3E 3C 2F  for power" /></
07:37:34: DEBUG: printBuffer:6058 64 61 74 61 3E 3C 3F 78 6D 6C 20 76 65 72 73 69 data><?xml versi
07:37:34: DEBUG: printBuffer:6058 6F 6E 3D 22 31 2E 30 22 20 65 6E 63 6F 64 69 6E on="1.0" encodin
07:37:34: DEBUG: printBuffer:6058 67 3D 22 55 54 46 2D 38 22 20 3F 3E 0A 3C 64 61 g="UTF-8" ?>.<da
07:37:34: DEBUG: printBuffer:6058 74 61 3E 0A 3C 72 65 73 70 6F 6E 73 65 20 76 61 ta>.<response va
07:37:34: DEBUG: printBuffer:6058 6C 75 65 3D 22 41 43 4B 22 20 72 61 77 6D 6F 64 lue="ACK" rawmod
07:37:34: DEBUG: printBuffer:6058 65 3D 22 66 61 6C 73 65 22 20 2F 3E 3C 2F 64 61 e="false" /></da
07:37:34: DEBUG: printBuffer:6058 74 61 3E 3C 3F 78 6D 6C 20 76 65 72 73 69 6F 6E ta><?xml version
07:37:34: DEBUG: printBuffer:6058 3D 22 31 2E 30 22 20 65 6E 63 6F 64 69 6E 67 3D ="1.0" encoding=
07:37:34: DEBUG: printBuffer:6058 22 55 54 46 2D 38 22 20 3F 3E 0A 3C 64 61 74 61 "UTF-8" ?>.<data
07:37:34: DEBUG: printBuffer:6058 3E 0A 3C 6C 6F 67 20 76 61 6C 75 65 3D 22 49 4E >.<log value="IN
07:37:34: DEBUG: printBuffer:6058 46 4F 3A 20 57 69 6C 6C 20 69 73 73 75 65 20 72 FO: Will issue r
07:37:34: DEBUG: printBuffer:6058 65 73 65 74 2F 70 6F 77 65 72 20 6F 66 66 20 31 eset/power off 1
07:37:34: DEBUG: printBuffer:6058 30 30 30 30 30 30 30 20 75 73 65 63 6F 6E 64 73 0000000 useconds
07:37:34: DEBUG: printBuffer:6058 2C 20 69 66 20 74 68 69 73 20 68 61 6E 67 73 20 , if this hangs
07:37:34: DEBUG: printBuffer:6058 63 68 65 63 6B 20 69 66 20 77 61 74 63 68 64 6F check if watchdo
07:37:34: DEBUG: printBuffer:6058 67 20 69 73 20 65 6E 61 62 6C 65 64 22 20 2F 3E g is enabled" />
07:37:34: DEBUG: printBuffer:6058 3C 2F 64 61 74 61 3E 3C 3F 78 6D 6C 20 76 65 72 </data><?xml ver
07:37:34: DEBUG: printBuffer:6058 73 69 6F 6E 3D 22 31 2E 30 22 20 65 6E 63 6F 64 sion="1.0" encod
07:37:34: DEBUG: printBuffer:6058 69 6E 67 3D 22 55 54 46 2D 38 22 20 3F 3E 0A 3C ing="UTF-8" ?>.<
07:37:34: DEBUG: printBuffer:6058 64 61 74 61 3E 0A 3C 6C 6F 67 20 76 61 6C 75 65 data>.<log value
07:37:34: DEBUG: printBuffer:6058 3D 22 49 4E 46 4F 3A 20 62 73 70 5F 74 61 72 67 ="INFO: bsp_targ
07:37:34: DEBUG: printBuffer:6058 65 74 5F 72 65 73 65 74 28 29 20 30 22 20 2F 3E et_reset() 0" />
07:37:34: DEBUG: printBuffer:6058 3C 2F 64 61 74 61 3E                            </data>
07:37:34: DEBUG: printBuffer:6071


07:37:34: DEBUG: XML FILE (101 bytes): CharsInBuffer=455-101=354
-------------------------------------------------------------------------------------------
<?xml version="1.0" encoding="UTF-8" ?>
<data>
<log value="INFO: Calling handler for power" /></data>
-------------------------------------------------------------------------------------------

07:37:34: INFO: TARGET SAID: 'INFO: Calling handler for power'
07:37:34: DEBUG: XML FILE (94 bytes): CharsInBuffer=354-94=260
-------------------------------------------------------------------------------------------
<?xml version="1.0" encoding="UTF-8" ?>
<data>
<response value="ACK" rawmode="false" /></data>
-------------------------------------------------------------------------------------------

07:37:34: DEBUG: Response was 'ACK'
07:37:34: DEBUG: Got the ACK
07:37:34: INFO: ==============================================================
07:37:34: INFO: Files used and their paths
07:37:34: INFO:   1 'C:\Users\p\AppData\Roaming\Qualcomm\QFIL\COMPORT_3\port_trace.txt'
07:37:34: INFO:      _             (done)
07:37:34: INFO:     | |                
07:37:34: INFO:   __| | ___  _ __   ___
07:37:34: INFO:  / _` |/ _ \| '_ \ / _ \
07:37:34: INFO: | (_| | (_) | | | |  __/
07:37:34: INFO:  \__,_|\___/|_| |_|\___|
07:37:34: INFO: {All Finished Successfully}

07:37:34: INFO: FILE ACCESS SLOW!!     0.00 B in  0.015 seconds (    0.00 Bps) --- Overall to target  0.094 seconds (0.00 Bps)

The last thing I remember was seeing message after Android 11 update that it did not got installed correctly and it did went in this dead mode. Thanks
 

1poweruser1

Member
Jul 21, 2020
35
2
Thanks here is the log
Code:
07:37:34: INFO: FH_LOADER WAS CALLED EXACTLY LIKE THIS
************************************************
E:\Downloads\Asus ZenPC\2009176rawfirm\fh_loader.exe --port=\\.\COM3 --reset --noprompt --showpercentagecomplete --maxpayloadsizeinbytes=49152 --zlpawarehost=1 --memoryname=ufs
************************************************

07:37:34: DEBUG: Binary build date: Apr 27 2018 @ 03:04:29

07:37:34: DEBUG: Build Version: 18.04.27.03.04.29

07:37:34: INFO: Current working dir (cwd): C:\Users\p\AppData\Roaming\Qualcomm\QFIL\COMPORT_3\
07:37:34: INFO: Showing network mappings to allow debugging
07:37:34: DEBUG: New connections will be remembered.

07:37:34: DEBUG:

07:37:34: DEBUG: There are no entries in the list.

07:37:34: DEBUG:

07:37:34: DEBUG: User set MaxPayloadSizeToTargetInBytes to 49152

07:37:34: DEBUG: User set ZLPAWAREHOST to 1

07:37:34: INFO: User wants to talk to port '\\.\COM3'
07:37:34: DEBUG: port_fd=0xD4

07:37:34: INFO: Took       0.01600000 seconds to open port
07:37:34: INFO: Sorting TAGS to ensure order is <configure>,<erase>, others, <patch>,<power>
07:37:34: INFO: If  you don't want this, use --dontsorttags

07:37:34: INFO: Sending <configure>
07:37:34: DEBUG: CHANNEL DATA (P0000) (H00202) (    225 bytes) - HOST TO TARGET -->
===========================================================================================================
<?xml version="1.0" encoding="UTF-8" ?>
<data>
<configure MemoryName="ufs" Verbose="0" AlwaysValidate="0" MaxDigestTableSizeInBytes="8192" MaxPayloadSizeToTargetInBytes="49152" ZlpAwareHost="1" SkipStorageInit="0" />
</data>

============================================================================================================

07:37:34: DEBUG: CharsInBuffer=0 Trying to read from USB 8192 bytes
07:37:34: DEBUG: CHANNEL DATA (487 bytes) <-- TARGET to HOST
07:37:34: DEBUG: CharsInBuffer = 487
07:37:34: DEBUG: printBuffer:5981 PRETTYPRINT Buffer is 487 bytes

07:37:34: DEBUG: printBuffer:6058 3C 3F 78 6D 6C 20 76 65 72 73 69 6F 6E 3D 22 31 <?xml version="1
07:37:34: DEBUG: printBuffer:6058 2E 30 22 20 65 6E 63 6F 64 69 6E 67 3D 22 55 54 .0" encoding="UT
07:37:34: DEBUG: printBuffer:6058 46 2D 38 22 20 3F 3E 0A 3C 64 61 74 61 3E 0A 3C F-8" ?>.<data>.<
07:37:34: DEBUG: printBuffer:6058 6C 6F 67 20 76 61 6C 75 65 3D 22 49 4E 46 4F 3A log value="INFO:
07:37:34: DEBUG: printBuffer:6058 20 43 61 6C 6C 69 6E 67 20 68 61 6E 64 6C 65 72  Calling handler
07:37:34: DEBUG: printBuffer:6058 20 66 6F 72 20 63 6F 6E 66 69 67 75 72 65 22 20  for configure"
07:37:34: DEBUG: printBuffer:6058 2F 3E 3C 2F 64 61 74 61 3E 3C 3F 78 6D 6C 20 76 /></data><?xml v
07:37:34: DEBUG: printBuffer:6058 65 72 73 69 6F 6E 3D 22 31 2E 30 22 20 65 6E 63 ersion="1.0" enc
07:37:34: DEBUG: printBuffer:6058 6F 64 69 6E 67 3D 22 55 54 46 2D 38 22 20 3F 3E oding="UTF-8" ?>
07:37:34: DEBUG: printBuffer:6058 0A 3C 64 61 74 61 3E 0A 3C 6C 6F 67 20 76 61 6C .<data>.<log val
07:37:34: DEBUG: printBuffer:6058 75 65 3D 22 49 4E 46 4F 3A 20 53 74 6F 72 61 67 ue="INFO: Storag
07:37:34: DEBUG: printBuffer:6058 65 20 74 79 70 65 20 73 65 74 20 74 6F 20 76 61 e type set to va
07:37:34: DEBUG: printBuffer:6058 6C 75 65 20 55 46 53 22 20 2F 3E 3C 2F 64 61 74 lue UFS" /></dat
07:37:34: DEBUG: printBuffer:6058 61 3E 3C 3F 78 6D 6C 20 76 65 72 73 69 6F 6E 3D a><?xml version=
07:37:34: DEBUG: printBuffer:6058 22 31 2E 30 22 20 65 6E 63 6F 64 69 6E 67 3D 22 "1.0" encoding="
07:37:34: DEBUG: printBuffer:6058 55 54 46 2D 38 22 20 3F 3E 0A 3C 64 61 74 61 3E UTF-8" ?>.<data>
07:37:34: DEBUG: printBuffer:6058 0A 3C 72 65 73 70 6F 6E 73 65 20 76 61 6C 75 65 .<response value
07:37:34: DEBUG: printBuffer:6058 3D 22 41 43 4B 22 20 4D 65 6D 6F 72 79 4E 61 6D ="ACK" MemoryNam
07:37:34: DEBUG: printBuffer:6058 65 3D 22 55 46 53 22 20 4D 69 6E 56 65 72 73 69 e="UFS" MinVersi
07:37:34: DEBUG: printBuffer:6058 6F 6E 53 75 70 70 6F 72 74 65 64 3D 22 31 22 20 onSupported="1"
07:37:34: DEBUG: printBuffer:6058 56 65 72 73 69 6F 6E 3D 22 31 22 20 4D 61 78 50 Version="1" MaxP
07:37:34: DEBUG: printBuffer:6058 61 79 6C 6F 61 64 53 69 7A 65 54 6F 54 61 72 67 ayloadSizeToTarg
07:37:34: DEBUG: printBuffer:6058 65 74 49 6E 42 79 74 65 73 3D 22 34 39 31 35 32 etInBytes="49152
07:37:34: DEBUG: printBuffer:6058 22 20 4D 61 78 50 61 79 6C 6F 61 64 53 69 7A 65 " MaxPayloadSize
07:37:34: DEBUG: printBuffer:6058 54 6F 54 61 72 67 65 74 49 6E 42 79 74 65 73 53 ToTargetInBytesS
07:37:34: DEBUG: printBuffer:6058 75 70 70 6F 72 74 65 64 3D 22 31 30 34 38 35 37 upported="104857
07:37:34: DEBUG: printBuffer:6058 36 22 20 4D 61 78 58 4D 4C 53 69 7A 65 49 6E 42 6" MaxXMLSizeInB
07:37:34: DEBUG: printBuffer:6058 79 74 65 73 3D 22 34 30 39 36 22 20 44 61 74 65 ytes="4096" Date
07:37:34: DEBUG: printBuffer:6058 54 69 6D 65 3D 22 4F 63 74 20 32 35 20 32 30 31 Time="Oct 25 201
07:37:34: DEBUG: printBuffer:6058 38 20 2D 20 31 33 3A 34 38 3A 31 30 22 20 2F 3E 8 - 13:48:10" />
07:37:34: DEBUG: printBuffer:6058 3C 2F 64 61 74 61 3E                            </data>
07:37:34: DEBUG: printBuffer:6071


07:37:34: DEBUG: XML FILE (105 bytes): CharsInBuffer=487-105=382
-------------------------------------------------------------------------------------------
<?xml version="1.0" encoding="UTF-8" ?>
<data>
<log value="INFO: Calling handler for configure" /></data>
-------------------------------------------------------------------------------------------

07:37:34: INFO: TARGET SAID: 'INFO: Calling handler for configure'
07:37:34: DEBUG: XML FILE (105 bytes): CharsInBuffer=382-105=277
-------------------------------------------------------------------------------------------
<?xml version="1.0" encoding="UTF-8" ?>
<data>
<log value="INFO: Storage type set to value UFS" /></data>
-------------------------------------------------------------------------------------------

07:37:34: INFO: TARGET SAID: 'INFO: Storage type set to value UFS'
07:37:34: DEBUG: XML FILE (277 bytes): CharsInBuffer=277-277=0
-------------------------------------------------------------------------------------------
<?xml version="1.0" encoding="UTF-8" ?>
<data>
<response value="ACK" MemoryName="UFS" MinVersionSupported="1" Version="1" MaxPayloadSizeToTargetInBytes="49152" MaxPayloadSizeToTargetInBytesSupported="1048576" MaxXMLSizeInBytes="4096" DateTime="Oct 25 2018 - 13:48:10" /></data>
-------------------------------------------------------------------------------------------

07:37:34: DEBUG: Response was 'ACK'
07:37:34: INFO: fh.attrs.MaxPayloadSizeToTargetInBytes = 49152
07:37:34: INFO: fh.attrs.MaxPayloadSizeToTargetInBytesSupported = 1048576
07:37:34: DEBUG: Got the ACK for the <configure>
07:37:34: INFO: Sending <configure>
07:37:34: DEBUG: CHANNEL DATA (P0001) (H00203) (    227 bytes) - HOST TO TARGET -->
===========================================================================================================
<?xml version="1.0" encoding="UTF-8" ?>
<data>
<configure MemoryName="UFS" Verbose="0" AlwaysValidate="0" MaxDigestTableSizeInBytes="8192" MaxPayloadSizeToTargetInBytes="1048576" ZlpAwareHost="1" SkipStorageInit="0" />
</data>

============================================================================================================

07:37:34: DEBUG: CharsInBuffer=0 Trying to read from USB 8192 bytes
07:37:34: DEBUG: CHANNEL DATA (489 bytes) <-- TARGET to HOST
07:37:34: DEBUG: CharsInBuffer = 489
07:37:34: DEBUG: printBuffer:5981 PRETTYPRINT Buffer is 489 bytes

07:37:34: DEBUG: printBuffer:6058 3C 3F 78 6D 6C 20 76 65 72 73 69 6F 6E 3D 22 31 <?xml version="1
07:37:34: DEBUG: printBuffer:6058 2E 30 22 20 65 6E 63 6F 64 69 6E 67 3D 22 55 54 .0" encoding="UT
07:37:34: DEBUG: printBuffer:6058 46 2D 38 22 20 3F 3E 0A 3C 64 61 74 61 3E 0A 3C F-8" ?>.<data>.<
07:37:34: DEBUG: printBuffer:6058 6C 6F 67 20 76 61 6C 75 65 3D 22 49 4E 46 4F 3A log value="INFO:
07:37:34: DEBUG: printBuffer:6058 20 43 61 6C 6C 69 6E 67 20 68 61 6E 64 6C 65 72  Calling handler
07:37:34: DEBUG: printBuffer:6058 20 66 6F 72 20 63 6F 6E 66 69 67 75 72 65 22 20  for configure"
07:37:34: DEBUG: printBuffer:6058 2F 3E 3C 2F 64 61 74 61 3E 3C 3F 78 6D 6C 20 76 /></data><?xml v
07:37:34: DEBUG: printBuffer:6058 65 72 73 69 6F 6E 3D 22 31 2E 30 22 20 65 6E 63 ersion="1.0" enc
07:37:34: DEBUG: printBuffer:6058 6F 64 69 6E 67 3D 22 55 54 46 2D 38 22 20 3F 3E oding="UTF-8" ?>
07:37:34: DEBUG: printBuffer:6058 0A 3C 64 61 74 61 3E 0A 3C 6C 6F 67 20 76 61 6C .<data>.<log val
07:37:34: DEBUG: printBuffer:6058 75 65 3D 22 49 4E 46 4F 3A 20 53 74 6F 72 61 67 ue="INFO: Storag
07:37:34: DEBUG: printBuffer:6058 65 20 74 79 70 65 20 73 65 74 20 74 6F 20 76 61 e type set to va
07:37:34: DEBUG: printBuffer:6058 6C 75 65 20 55 46 53 22 20 2F 3E 3C 2F 64 61 74 lue UFS" /></dat
07:37:34: DEBUG: printBuffer:6058 61 3E 3C 3F 78 6D 6C 20 76 65 72 73 69 6F 6E 3D a><?xml version=
07:37:34: DEBUG: printBuffer:6058 22 31 2E 30 22 20 65 6E 63 6F 64 69 6E 67 3D 22 "1.0" encoding="
07:37:34: DEBUG: printBuffer:6058 55 54 46 2D 38 22 20 3F 3E 0A 3C 64 61 74 61 3E UTF-8" ?>.<data>
07:37:34: DEBUG: printBuffer:6058 0A 3C 72 65 73 70 6F 6E 73 65 20 76 61 6C 75 65 .<response value
07:37:34: DEBUG: printBuffer:6058 3D 22 41 43 4B 22 20 4D 65 6D 6F 72 79 4E 61 6D ="ACK" MemoryNam
07:37:34: DEBUG: printBuffer:6058 65 3D 22 55 46 53 22 20 4D 69 6E 56 65 72 73 69 e="UFS" MinVersi
07:37:34: DEBUG: printBuffer:6058 6F 6E 53 75 70 70 6F 72 74 65 64 3D 22 31 22 20 onSupported="1"
07:37:34: DEBUG: printBuffer:6058 56 65 72 73 69 6F 6E 3D 22 31 22 20 4D 61 78 50 Version="1" MaxP
07:37:34: DEBUG: printBuffer:6058 61 79 6C 6F 61 64 53 69 7A 65 54 6F 54 61 72 67 ayloadSizeToTarg
07:37:34: DEBUG: printBuffer:6058 65 74 49 6E 42 79 74 65 73 3D 22 31 30 34 38 35 etInBytes="10485
07:37:34: DEBUG: printBuffer:6058 37 36 22 20 4D 61 78 50 61 79 6C 6F 61 64 53 69 76" MaxPayloadSi
07:37:34: DEBUG: printBuffer:6058 7A 65 54 6F 54 61 72 67 65 74 49 6E 42 79 74 65 zeToTargetInByte
07:37:34: DEBUG: printBuffer:6058 73 53 75 70 70 6F 72 74 65 64 3D 22 31 30 34 38 sSupported="1048
07:37:34: DEBUG: printBuffer:6058 35 37 36 22 20 4D 61 78 58 4D 4C 53 69 7A 65 49 576" MaxXMLSizeI
07:37:34: DEBUG: printBuffer:6058 6E 42 79 74 65 73 3D 22 34 30 39 36 22 20 44 61 nBytes="4096" Da
07:37:34: DEBUG: printBuffer:6058 74 65 54 69 6D 65 3D 22 4F 63 74 20 32 35 20 32 teTime="Oct 25 2
07:37:34: DEBUG: printBuffer:6058 30 31 38 20 2D 20 31 33 3A 34 38 3A 31 30 22 20 018 - 13:48:10"
07:37:34: DEBUG: printBuffer:6058 2F 3E 3C 2F 64 61 74 61 3E                      /></data>
07:37:34: DEBUG: printBuffer:6071


07:37:34: DEBUG: XML FILE (105 bytes): CharsInBuffer=489-105=384
-------------------------------------------------------------------------------------------
<?xml version="1.0" encoding="UTF-8" ?>
<data>
<log value="INFO: Calling handler for configure" /></data>
-------------------------------------------------------------------------------------------

07:37:34: INFO: TARGET SAID: 'INFO: Calling handler for configure'
07:37:34: DEBUG: XML FILE (105 bytes): CharsInBuffer=384-105=279
-------------------------------------------------------------------------------------------
<?xml version="1.0" encoding="UTF-8" ?>
<data>
<log value="INFO: Storage type set to value UFS" /></data>
-------------------------------------------------------------------------------------------

07:37:34: INFO: TARGET SAID: 'INFO: Storage type set to value UFS'
07:37:34: DEBUG: XML FILE (279 bytes): CharsInBuffer=279-279=0
-------------------------------------------------------------------------------------------
<?xml version="1.0" encoding="UTF-8" ?>
<data>
<response value="ACK" MemoryName="UFS" MinVersionSupported="1" Version="1" MaxPayloadSizeToTargetInBytes="1048576" MaxPayloadSizeToTargetInBytesSupported="1048576" MaxXMLSizeInBytes="4096" DateTime="Oct 25 2018 - 13:48:10" /></data>
-------------------------------------------------------------------------------------------

07:37:34: DEBUG: Response was 'ACK'
07:37:34: INFO: fh.attrs.MaxPayloadSizeToTargetInBytes = 1048576
07:37:34: INFO: fh.attrs.MaxPayloadSizeToTargetInBytesSupported = 1048576
07:37:34: DEBUG: Got the ACK for the <configure>
07:37:34: INFO: Sending <power>
07:37:34: DEBUG: CHANNEL DATA (P0002) (H00204) (     99 bytes) - HOST TO TARGET -->
===========================================================================================================
<?xml version="1.0" encoding="UTF-8" ?>
<data>
<power DelayInSeconds="10" value="reset" />
</data>

============================================================================================================

07:37:34: DEBUG: CharsInBuffer=0 Trying to read from USB 8192 bytes
07:37:34: DEBUG: CHANNEL DATA (455 bytes) <-- TARGET to HOST
07:37:34: DEBUG: CharsInBuffer = 455
07:37:34: DEBUG: printBuffer:5981 PRETTYPRINT Buffer is 455 bytes

07:37:34: DEBUG: printBuffer:6058 3C 3F 78 6D 6C 20 76 65 72 73 69 6F 6E 3D 22 31 <?xml version="1
07:37:34: DEBUG: printBuffer:6058 2E 30 22 20 65 6E 63 6F 64 69 6E 67 3D 22 55 54 .0" encoding="UT
07:37:34: DEBUG: printBuffer:6058 46 2D 38 22 20 3F 3E 0A 3C 64 61 74 61 3E 0A 3C F-8" ?>.<data>.<
07:37:34: DEBUG: printBuffer:6058 6C 6F 67 20 76 61 6C 75 65 3D 22 49 4E 46 4F 3A log value="INFO:
07:37:34: DEBUG: printBuffer:6058 20 43 61 6C 6C 69 6E 67 20 68 61 6E 64 6C 65 72  Calling handler
07:37:34: DEBUG: printBuffer:6058 20 66 6F 72 20 70 6F 77 65 72 22 20 2F 3E 3C 2F  for power" /></
07:37:34: DEBUG: printBuffer:6058 64 61 74 61 3E 3C 3F 78 6D 6C 20 76 65 72 73 69 data><?xml versi
07:37:34: DEBUG: printBuffer:6058 6F 6E 3D 22 31 2E 30 22 20 65 6E 63 6F 64 69 6E on="1.0" encodin
07:37:34: DEBUG: printBuffer:6058 67 3D 22 55 54 46 2D 38 22 20 3F 3E 0A 3C 64 61 g="UTF-8" ?>.<da
07:37:34: DEBUG: printBuffer:6058 74 61 3E 0A 3C 72 65 73 70 6F 6E 73 65 20 76 61 ta>.<response va
07:37:34: DEBUG: printBuffer:6058 6C 75 65 3D 22 41 43 4B 22 20 72 61 77 6D 6F 64 lue="ACK" rawmod
07:37:34: DEBUG: printBuffer:6058 65 3D 22 66 61 6C 73 65 22 20 2F 3E 3C 2F 64 61 e="false" /></da
07:37:34: DEBUG: printBuffer:6058 74 61 3E 3C 3F 78 6D 6C 20 76 65 72 73 69 6F 6E ta><?xml version
07:37:34: DEBUG: printBuffer:6058 3D 22 31 2E 30 22 20 65 6E 63 6F 64 69 6E 67 3D ="1.0" encoding=
07:37:34: DEBUG: printBuffer:6058 22 55 54 46 2D 38 22 20 3F 3E 0A 3C 64 61 74 61 "UTF-8" ?>.<data
07:37:34: DEBUG: printBuffer:6058 3E 0A 3C 6C 6F 67 20 76 61 6C 75 65 3D 22 49 4E >.<log value="IN
07:37:34: DEBUG: printBuffer:6058 46 4F 3A 20 57 69 6C 6C 20 69 73 73 75 65 20 72 FO: Will issue r
07:37:34: DEBUG: printBuffer:6058 65 73 65 74 2F 70 6F 77 65 72 20 6F 66 66 20 31 eset/power off 1
07:37:34: DEBUG: printBuffer:6058 30 30 30 30 30 30 30 20 75 73 65 63 6F 6E 64 73 0000000 useconds
07:37:34: DEBUG: printBuffer:6058 2C 20 69 66 20 74 68 69 73 20 68 61 6E 67 73 20 , if this hangs
07:37:34: DEBUG: printBuffer:6058 63 68 65 63 6B 20 69 66 20 77 61 74 63 68 64 6F check if watchdo
07:37:34: DEBUG: printBuffer:6058 67 20 69 73 20 65 6E 61 62 6C 65 64 22 20 2F 3E g is enabled" />
07:37:34: DEBUG: printBuffer:6058 3C 2F 64 61 74 61 3E 3C 3F 78 6D 6C 20 76 65 72 </data><?xml ver
07:37:34: DEBUG: printBuffer:6058 73 69 6F 6E 3D 22 31 2E 30 22 20 65 6E 63 6F 64 sion="1.0" encod
07:37:34: DEBUG: printBuffer:6058 69 6E 67 3D 22 55 54 46 2D 38 22 20 3F 3E 0A 3C ing="UTF-8" ?>.<
07:37:34: DEBUG: printBuffer:6058 64 61 74 61 3E 0A 3C 6C 6F 67 20 76 61 6C 75 65 data>.<log value
07:37:34: DEBUG: printBuffer:6058 3D 22 49 4E 46 4F 3A 20 62 73 70 5F 74 61 72 67 ="INFO: bsp_targ
07:37:34: DEBUG: printBuffer:6058 65 74 5F 72 65 73 65 74 28 29 20 30 22 20 2F 3E et_reset() 0" />
07:37:34: DEBUG: printBuffer:6058 3C 2F 64 61 74 61 3E                            </data>
07:37:34: DEBUG: printBuffer:6071


07:37:34: DEBUG: XML FILE (101 bytes): CharsInBuffer=455-101=354
-------------------------------------------------------------------------------------------
<?xml version="1.0" encoding="UTF-8" ?>
<data>
<log value="INFO: Calling handler for power" /></data>
-------------------------------------------------------------------------------------------

07:37:34: INFO: TARGET SAID: 'INFO: Calling handler for power'
07:37:34: DEBUG: XML FILE (94 bytes): CharsInBuffer=354-94=260
-------------------------------------------------------------------------------------------
<?xml version="1.0" encoding="UTF-8" ?>
<data>
<response value="ACK" rawmode="false" /></data>
-------------------------------------------------------------------------------------------

07:37:34: DEBUG: Response was 'ACK'
07:37:34: DEBUG: Got the ACK
07:37:34: INFO: ==============================================================
07:37:34: INFO: Files used and their paths
07:37:34: INFO:   1 'C:\Users\p\AppData\Roaming\Qualcomm\QFIL\COMPORT_3\port_trace.txt'
07:37:34: INFO:      _             (done)
07:37:34: INFO:     | |          
07:37:34: INFO:   __| | ___  _ __   ___
07:37:34: INFO:  / _` |/ _ \| '_ \ / _ \
07:37:34: INFO: | (_| | (_) | | | |  __/
07:37:34: INFO:  \__,_|\___/|_| |_|\___|
07:37:34: INFO: {All Finished Successfully}

07:37:34: INFO: FILE ACCESS SLOW!!     0.00 B in  0.015 seconds (    0.00 Bps) --- Overall to target  0.094 seconds (0.00 Bps)[/spoiler]

The last thing I remember was seeing message after Android 11 update that it did not got installed correctly and it did went in this dead mode. Thanks
move service fw folder in c:/ and post log

did u enable debug mode yourself? im not seeing buffers in hex as u

uninstall any edl driver related software you might have installed

try uninstalling the driver from "manage devices", also tick "delete software related to this driver"

nect the device, run windows update and see if an additional driver update is available
 
Last edited:

shubhworld

Member
Mar 1, 2021
14
0
move service fw folder in c:/ and post log

did u enable debug mode yourself? im not seeing buffers in hex as u

uninstall any edl driver related software you might have installed

try uninstalling the driver from "manage devices", also tick "delete software related to this driver"

nect the device, run windows update and see if an additional driver update is available


Thanks Tried all the steps, now its not in debug mode but its failing here is the log


Code:
2021-03-03 22:11:47.513    Load APP Configuration
2021-03-03 22:11:47.523    COM:3
2021-03-03 22:11:47.523    PBLDOWNLOADPROTOCOL:0
2021-03-03 22:11:47.523    PROGRAMMER:True
2021-03-03 22:11:47.523    PROGRAMMER:C:\2009176rawfirm2009.176\prog_firehose_ddr.elf
2021-03-03 22:11:47.523    RESETSAHARASTATEMACHINE:False
2021-03-03 22:11:47.523    SAHARAREADSERIALNO:False
2021-03-03 22:11:47.523    SEARCHPATH:C:\2009176rawfirm2009.176
2021-03-03 22:11:47.523    RAWPROGRAM:
2021-03-03 22:11:47.534    rawprogram0.xml
2021-03-03 22:11:47.534    rawprogram1.xml
2021-03-03 22:11:47.534    rawprogram2.xml
2021-03-03 22:11:47.534    rawprogram3.xml
2021-03-03 22:11:47.534    rawprogram4.xml
2021-03-03 22:11:47.534    rawprogram5.xml
2021-03-03 22:11:47.534    PATCH:
2021-03-03 22:11:47.534    patch0.xml
2021-03-03 22:11:47.534    patch1.xml
2021-03-03 22:11:47.543    patch2.xml
2021-03-03 22:11:47.543    patch3.xml
2021-03-03 22:11:47.543    patch4.xml
2021-03-03 22:11:47.543    patch5.xml
2021-03-03 22:11:47.543    ACKRAWDATAEVERYNUMPACKETS:False
2021-03-03 22:11:47.543    ACKRAWDATAEVERYNUMPACKETS:100
2021-03-03 22:11:47.543    MAXPAYLOADSIZETOTARGETINBYTES:True
2021-03-03 22:11:47.543    MAXPAYLOADSIZETOTARGETINBYTES:49152
2021-03-03 22:11:47.543    DEVICETYPE:ufs
2021-03-03 22:11:47.543    PLATFORM:8x26
2021-03-03 22:11:47.543    VALIDATIONMODE:0
2021-03-03 22:11:47.543    RESETAFTERDOWNLOAD:True
2021-03-03 22:11:47.554    MAXDIGESTTABLESIZE:8192
2021-03-03 22:11:47.554    SWITCHTOFIREHOSETIMEOUT:50
2021-03-03 22:11:47.554    RESETTIMEOUT:500
2021-03-03 22:11:47.554    RESETDELAYTIME:5
2021-03-03 22:11:47.554    METABUILD:
2021-03-03 22:11:47.554    METABUILD:
2021-03-03 22:11:47.554    FLATBUILDPATH:C:\
2021-03-03 22:11:47.563    FLATBUILDFORCEOVERRIDE:True
2021-03-03 22:11:47.563    QCNPATH:C:\Temp\00000000.qcn
2021-03-03 22:11:47.563    QCNAUTOBACKUPRESTORE:False
2021-03-03 22:11:47.563    SPCCODE:000000
2021-03-03 22:11:47.563    ENABLEMULTISIM:False
2021-03-03 22:11:47.563    AUTOPRESERVEPARTITIONS:False
2021-03-03 22:11:47.563    PARTITIONPRESERVEMODE:0
2021-03-03 22:11:47.563    PRESERVEDPARTITIONS:0
2021-03-03 22:11:47.563    PRESERVEDPARTITIONS:
2021-03-03 22:11:47.563    ERASEALL:False
2021-03-03 22:11:47.574    Load ARG Configuration
2021-03-03 22:11:47.574    COM:3
2021-03-03 22:11:47.574    PROGRAMMER:True
2021-03-03 22:11:47.574    PROGRAMMER:C:\2009176rawfirm2009.176\prog_firehose_ddr.elf
2021-03-03 22:11:47.574    SEARCHPATH:C:\2009176rawfirm2009.176
2021-03-03 22:11:47.574    RAWPROGRAM:
2021-03-03 22:11:47.574    rawprogram0.xml
2021-03-03 22:11:47.574    rawprogram1.xml
2021-03-03 22:11:47.574    rawprogram2.xml
2021-03-03 22:11:47.583    rawprogram3.xml
2021-03-03 22:11:47.583    rawprogram4.xml
2021-03-03 22:11:47.583    rawprogram5.xml
2021-03-03 22:11:47.583    PATCH:
2021-03-03 22:11:47.583    patch0.xml
2021-03-03 22:11:47.583    patch1.xml
2021-03-03 22:11:47.583    patch2.xml
2021-03-03 22:11:47.583    patch3.xml
2021-03-03 22:11:47.583    patch4.xml
2021-03-03 22:11:47.583    patch5.xml
2021-03-03 22:11:47.583    MAXPAYLOADSIZETOTARGETINBYTES:True
2021-03-03 22:11:47.583    MAXPAYLOADSIZETOTARGETINBYTES:49152
2021-03-03 22:11:47.594    DEVICETYPE:UFS
2021-03-03 22:11:47.594    RESETAFTERDOWNLOAD:True
2021-03-03 22:11:47.594    SWITCHTOFIREHOSETIMEOUT:50
2021-03-03 22:11:47.594    RESETTIMEOUT:500
2021-03-03 22:11:47.594    RESETDELAYTIME:5
2021-03-03 22:11:47.604    Validating Download Configuration
2021-03-03 22:11:47.604    Image Search Path: C:\2009176rawfirm2009.176
2021-03-03 22:11:47.604    RAWPROGRAM file path: C:\2009176rawfirm2009.176\rawprogram0.xml
2021-03-03 22:11:47.604    RAWPROGRAM file path: C:\2009176rawfirm2009.176\rawprogram1.xml
2021-03-03 22:11:47.614    RAWPROGRAM file path: C:\2009176rawfirm2009.176\rawprogram2.xml
2021-03-03 22:11:47.614    RAWPROGRAM file path: C:\2009176rawfirm2009.176\rawprogram3.xml
2021-03-03 22:11:47.614    RAWPROGRAM file path: C:\2009176rawfirm2009.176\rawprogram4.xml
2021-03-03 22:11:47.614    RAWPROGRAM file path: C:\2009176rawfirm2009.176\rawprogram5.xml
2021-03-03 22:11:47.614    PATCH file path:C:\2009176rawfirm2009.176\patch0.xml
2021-03-03 22:11:47.619    PATCH file path:C:\2009176rawfirm2009.176\patch1.xml
2021-03-03 22:11:47.619    PATCH file path:C:\2009176rawfirm2009.176\patch2.xml
2021-03-03 22:11:47.619    PATCH file path:C:\2009176rawfirm2009.176\patch3.xml
2021-03-03 22:11:47.619    PATCH file path:C:\2009176rawfirm2009.176\patch4.xml
2021-03-03 22:11:47.619    PATCH file path:C:\2009176rawfirm2009.176\patch5.xml
2021-03-03 22:11:47.624    Programmer Path:C:\2009176rawfirm2009.176\prog_firehose_ddr.elf
2021-03-03 22:11:47.629    QFIL version: 2.0.2.1
2021-03-03 22:11:47.644    Start Download
2021-03-03 22:11:47.654    Program Path:C:\2009176rawfirm2009.176\prog_firehose_ddr.elf
2021-03-03 22:11:47.654    ***** Working Folder:C:\Users\paras\AppData\Roaming\Qualcomm\QFIL\COMPORT_3
2021-03-03 22:13:17.684    Binary build date: Apr 27 2018 @ 03:04:33
2021-03-03 22:13:17.685    QSAHARASERVER CALLED LIKE THIS: 'C:\2009176rawfirm2009.176\QSaharaServer.ex'Current working dir: C:\Users\paras\AppData\Roaming\Qualcomm\QFIL\COMPORT_3
2021-03-03 22:13:17.687    Sahara mappings:
2021-03-03 22:13:17.688    2: amss.mbn
2021-03-03 22:13:17.689    6: apps.mbn
2021-03-03 22:13:17.690    8: dsp1.mbn
2021-03-03 22:13:17.691    10: dbl.mbn
2021-03-03 22:13:17.692    11: osbl.mbn
2021-03-03 22:13:17.693    12: dsp2.mbn
2021-03-03 22:13:17.693    16: efs1.mbn
2021-03-03 22:13:17.695    17: efs2.mbn
2021-03-03 22:13:17.697    20: efs3.mbn
2021-03-03 22:13:17.698    21: sbl1.mbn
2021-03-03 22:13:17.699    22: sbl2.mbn
2021-03-03 22:13:17.700    23: rpm.mbn
2021-03-03 22:13:17.701    25: tz.mbn
2021-03-03 22:13:17.702    28: dsp3.mbn
2021-03-03 22:13:17.703    29: acdb.mbn
2021-03-03 22:13:17.704    30: wdt.mbn
2021-03-03 22:13:17.705    31: mba.mbn
2021-03-03 22:13:17.707    13: C:\2009176rawfirm2009.176\prog_firehose_ddr.elf
2021-03-03 22:13:17.708   
2021-03-03 22:13:17.709    22:13:17: ERROR: function: sahara_rx_data:277 Unable to read packet header. Only read 0 bytes.
2021-03-03 22:13:17.710   
2021-03-03 22:13:17.711    22:13:17: ERROR: function: sahara_main:983 Sahara protocol error
2021-03-03 22:13:17.713   
2021-03-03 22:13:17.714    22:13:17: ERROR: function: main:320 Uploading  Image using Sahara protocol failed
2021-03-03 22:13:17.715   
2021-03-03 22:13:17.718   
2021-03-03 22:13:17.719    Download Fail:Sahara Fail:QSaharaServer Fail:Process fail
2021-03-03 22:13:17.720    Finish Download

What to do ? Please guide
 

1poweruser1

Member
Jul 21, 2020
35
2
Thanks Tried all the steps, now its not in debug mode but its failing here is the log


Code:
2021-03-03 22:11:47.513    Load APP Configuration
2021-03-03 22:11:47.523    COM:3
2021-03-03 22:11:47.523    PBLDOWNLOADPROTOCOL:0
2021-03-03 22:11:47.523    PROGRAMMER:True
2021-03-03 22:11:47.523    PROGRAMMER:C:\2009176rawfirm2009.176\prog_firehose_ddr.elf
2021-03-03 22:11:47.523    RESETSAHARASTATEMACHINE:False
2021-03-03 22:11:47.523    SAHARAREADSERIALNO:False
2021-03-03 22:11:47.523    SEARCHPATH:C:\2009176rawfirm2009.176
2021-03-03 22:11:47.523    RAWPROGRAM:
2021-03-03 22:11:47.534    rawprogram0.xml
2021-03-03 22:11:47.534    rawprogram1.xml
2021-03-03 22:11:47.534    rawprogram2.xml
2021-03-03 22:11:47.534    rawprogram3.xml
2021-03-03 22:11:47.534    rawprogram4.xml
2021-03-03 22:11:47.534    rawprogram5.xml
2021-03-03 22:11:47.534    PATCH:
2021-03-03 22:11:47.534    patch0.xml
2021-03-03 22:11:47.534    patch1.xml
2021-03-03 22:11:47.543    patch2.xml
2021-03-03 22:11:47.543    patch3.xml
2021-03-03 22:11:47.543    patch4.xml
2021-03-03 22:11:47.543    patch5.xml
2021-03-03 22:11:47.543    ACKRAWDATAEVERYNUMPACKETS:False
2021-03-03 22:11:47.543    ACKRAWDATAEVERYNUMPACKETS:100
2021-03-03 22:11:47.543    MAXPAYLOADSIZETOTARGETINBYTES:True
2021-03-03 22:11:47.543    MAXPAYLOADSIZETOTARGETINBYTES:49152
2021-03-03 22:11:47.543    DEVICETYPE:ufs
2021-03-03 22:11:47.543    PLATFORM:8x26
2021-03-03 22:11:47.543    VALIDATIONMODE:0
2021-03-03 22:11:47.543    RESETAFTERDOWNLOAD:True
2021-03-03 22:11:47.554    MAXDIGESTTABLESIZE:8192
2021-03-03 22:11:47.554    SWITCHTOFIREHOSETIMEOUT:50
2021-03-03 22:11:47.554    RESETTIMEOUT:500
2021-03-03 22:11:47.554    RESETDELAYTIME:5
2021-03-03 22:11:47.554    METABUILD:
2021-03-03 22:11:47.554    METABUILD:
2021-03-03 22:11:47.554    FLATBUILDPATH:C:\
2021-03-03 22:11:47.563    FLATBUILDFORCEOVERRIDE:True
2021-03-03 22:11:47.563    QCNPATH:C:\Temp\00000000.qcn
2021-03-03 22:11:47.563    QCNAUTOBACKUPRESTORE:False
2021-03-03 22:11:47.563    SPCCODE:000000
2021-03-03 22:11:47.563    ENABLEMULTISIM:False
2021-03-03 22:11:47.563    AUTOPRESERVEPARTITIONS:False
2021-03-03 22:11:47.563    PARTITIONPRESERVEMODE:0
2021-03-03 22:11:47.563    PRESERVEDPARTITIONS:0
2021-03-03 22:11:47.563    PRESERVEDPARTITIONS:
2021-03-03 22:11:47.563    ERASEALL:False
2021-03-03 22:11:47.574    Load ARG Configuration
2021-03-03 22:11:47.574    COM:3
2021-03-03 22:11:47.574    PROGRAMMER:True
2021-03-03 22:11:47.574    PROGRAMMER:C:\2009176rawfirm2009.176\prog_firehose_ddr.elf
2021-03-03 22:11:47.574    SEARCHPATH:C:\2009176rawfirm2009.176
2021-03-03 22:11:47.574    RAWPROGRAM:
2021-03-03 22:11:47.574    rawprogram0.xml
2021-03-03 22:11:47.574    rawprogram1.xml
2021-03-03 22:11:47.574    rawprogram2.xml
2021-03-03 22:11:47.583    rawprogram3.xml
2021-03-03 22:11:47.583    rawprogram4.xml
2021-03-03 22:11:47.583    rawprogram5.xml
2021-03-03 22:11:47.583    PATCH:
2021-03-03 22:11:47.583    patch0.xml
2021-03-03 22:11:47.583    patch1.xml
2021-03-03 22:11:47.583    patch2.xml
2021-03-03 22:11:47.583    patch3.xml
2021-03-03 22:11:47.583    patch4.xml
2021-03-03 22:11:47.583    patch5.xml
2021-03-03 22:11:47.583    MAXPAYLOADSIZETOTARGETINBYTES:True
2021-03-03 22:11:47.583    MAXPAYLOADSIZETOTARGETINBYTES:49152
2021-03-03 22:11:47.594    DEVICETYPE:UFS
2021-03-03 22:11:47.594    RESETAFTERDOWNLOAD:True
2021-03-03 22:11:47.594    SWITCHTOFIREHOSETIMEOUT:50
2021-03-03 22:11:47.594    RESETTIMEOUT:500
2021-03-03 22:11:47.594    RESETDELAYTIME:5
2021-03-03 22:11:47.604    Validating Download Configuration
2021-03-03 22:11:47.604    Image Search Path: C:\2009176rawfirm2009.176
2021-03-03 22:11:47.604    RAWPROGRAM file path: C:\2009176rawfirm2009.176\rawprogram0.xml
2021-03-03 22:11:47.604    RAWPROGRAM file path: C:\2009176rawfirm2009.176\rawprogram1.xml
2021-03-03 22:11:47.614    RAWPROGRAM file path: C:\2009176rawfirm2009.176\rawprogram2.xml
2021-03-03 22:11:47.614    RAWPROGRAM file path: C:\2009176rawfirm2009.176\rawprogram3.xml
2021-03-03 22:11:47.614    RAWPROGRAM file path: C:\2009176rawfirm2009.176\rawprogram4.xml
2021-03-03 22:11:47.614    RAWPROGRAM file path: C:\2009176rawfirm2009.176\rawprogram5.xml
2021-03-03 22:11:47.614    PATCH file path:C:\2009176rawfirm2009.176\patch0.xml
2021-03-03 22:11:47.619    PATCH file path:C:\2009176rawfirm2009.176\patch1.xml
2021-03-03 22:11:47.619    PATCH file path:C:\2009176rawfirm2009.176\patch2.xml
2021-03-03 22:11:47.619    PATCH file path:C:\2009176rawfirm2009.176\patch3.xml
2021-03-03 22:11:47.619    PATCH file path:C:\2009176rawfirm2009.176\patch4.xml
2021-03-03 22:11:47.619    PATCH file path:C:\2009176rawfirm2009.176\patch5.xml
2021-03-03 22:11:47.624    Programmer Path:C:\2009176rawfirm2009.176\prog_firehose_ddr.elf
2021-03-03 22:11:47.629    QFIL version: 2.0.2.1
2021-03-03 22:11:47.644    Start Download
2021-03-03 22:11:47.654    Program Path:C:\2009176rawfirm2009.176\prog_firehose_ddr.elf
2021-03-03 22:11:47.654    ***** Working Folder:C:\Users\paras\AppData\Roaming\Qualcomm\QFIL\COMPORT_3
2021-03-03 22:13:17.684    Binary build date: Apr 27 2018 @ 03:04:33
2021-03-03 22:13:17.685    QSAHARASERVER CALLED LIKE THIS: 'C:\2009176rawfirm2009.176\QSaharaServer.ex'Current working dir: C:\Users\paras\AppData\Roaming\Qualcomm\QFIL\COMPORT_3
2021-03-03 22:13:17.687    Sahara mappings:
2021-03-03 22:13:17.688    2: amss.mbn
2021-03-03 22:13:17.689    6: apps.mbn
2021-03-03 22:13:17.690    8: dsp1.mbn
2021-03-03 22:13:17.691    10: dbl.mbn
2021-03-03 22:13:17.692    11: osbl.mbn
2021-03-03 22:13:17.693    12: dsp2.mbn
2021-03-03 22:13:17.693    16: efs1.mbn
2021-03-03 22:13:17.695    17: efs2.mbn
2021-03-03 22:13:17.697    20: efs3.mbn
2021-03-03 22:13:17.698    21: sbl1.mbn
2021-03-03 22:13:17.699    22: sbl2.mbn
2021-03-03 22:13:17.700    23: rpm.mbn
2021-03-03 22:13:17.701    25: tz.mbn
2021-03-03 22:13:17.702    28: dsp3.mbn
2021-03-03 22:13:17.703    29: acdb.mbn
2021-03-03 22:13:17.704    30: wdt.mbn
2021-03-03 22:13:17.705    31: mba.mbn
2021-03-03 22:13:17.707    13: C:\2009176rawfirm2009.176\prog_firehose_ddr.elf
2021-03-03 22:13:17.708  
2021-03-03 22:13:17.709    22:13:17: ERROR: function: sahara_rx_data:277 Unable to read packet header. Only read 0 bytes.
2021-03-03 22:13:17.710  
2021-03-03 22:13:17.711    22:13:17: ERROR: function: sahara_main:983 Sahara protocol error
2021-03-03 22:13:17.713  
2021-03-03 22:13:17.714    22:13:17: ERROR: function: main:320 Uploading  Image using Sahara protocol failed
2021-03-03 22:13:17.715  
2021-03-03 22:13:17.718  
2021-03-03 22:13:17.719    Download Fail:Sahara Fail:QSaharaServer Fail:Process fail
2021-03-03 22:13:17.720    Finish Download

What to do ? Please guide
try holding power and vol - for 15 seconds then connect the phone

go to manage devices, do you see any com device in "qloader 9008" mode?
 

1poweruser1

Member
Jul 21, 2020
35
2
Tried on windows 7 same error :(
log says it can't initiate a connection to device

i would try to
- try last time with another pc with windows 10 (im saying windows 10 because windows update might detect which edl mode your phone is into and then install the proper edl driver; your phone might not be in 9008 mode but in some other broken edl service mode)
-testpoint method (see attachment) u need to disconnect battery, bridge two points with a conductor and then connect to pc. phone might be in some broken edl service mode
- send it to repair
 

Attachments

  • IMG_20210303_194056.jpg
    IMG_20210303_194056.jpg
    45.4 KB · Views: 7
Last edited:

shubhworld

Member
Mar 1, 2021
14
0
log says it can't initiate a connection to device

i would try to
- try last time with another pc with windows 10 (im saying windows 10 because windows update might detect which edl mode your phone is into and then install the proper edl driver; your phone might not be in 9008 mode but in some other broken edl service mode)
-testpoint method (see attachment) u need to disconnect battery, bridge two points with a conductor and then connect to pc. phone might be in some broken edl service mode
- send it to repair


Hi, thanks for suggesting but my bad I did not mention details properly, after android 11 update I got 2 options one was android 11 did not install correctly and second was do it later I chooses do it later felt can take the backup of phone and after connecting to pc and copying some files it went to dead mode with nothing working no power keys no volume no bootloader nothing so after reading about it I did a test points method but did not remove battery to bring the phone back in Qualcomm 9008 mode and then tried flash edl methods.

Will try on another system again.

Namaste!
 

1poweruser1

Member
Jul 21, 2020
35
2
Hi, thanks for suggesting but my bad I did not mention details properly, after android 11 update I got 2 options one was android 11 did not install correctly and second was do it later I chooses do it later felt can take the backup of phone and after connecting to pc and copying some files it went to dead mode with nothing working no power keys no volume no bootloader nothing so after reading about it I did a test points method but did not remove battery to bring the phone back in Qualcomm 9008 mode and then tried flash edl methods.

Will try on another system again.

Namaste!
try testpoint without battery
 

Top Liked Posts

  • There are no posts matching your filters.
  • 10
    Hi everyone,
    If your phone does not react on any of yours actions. You may have the same problem. This is an instruction how to fix it.
    If you have a last version of Windows 10 you can easily check if it is your case (You will have "Qualcomm HS-USB QDLoader 9008" device at your Windows devices' list.

    How to Fix:
    1. Download Drivers Qualcomm_QDLoader_HS-USB_Driver_64bit_Setup.zip and install it.
    2. Download firmware link1 or link2
    3. Install the driver
    4. Unpack a firmware archive
    5. Power off your phone by pressing Voice Down + Power Buttons (If your phone would be in this state too long the script would not works).
    6. Start update_image_EDL.bat script - it will recreate all of the partitions
    7. After the script will finish you will see the bootloader
    8. Start script flashall_AFT.cmd - it will install firmware to the new partitions
    9. Download fresh official firmware from asus site and put the archive at your memory card.
    10. Start bootloader
    11. Go to a standard recovery mode and install this firmware form the card
    12. restart and repeat 10-11 (it will install software at the second state)
    13. The problem is fixed. Congratulations!

    Common problems:
    Exception: System.DLLNotFoundException: DLL "QMSL_MSVC10R.dll": Module was not found. (HRESULT: 0x8007007E) can not be loaded.
    Solution: You need to install Microsoft Visual C++ 2010 Service Pack 1 Redistributable Package MFC. Thanks to Genim
    2
    After spending hours looking at errors like this one and slow speeds on AFH, I managed to download both files. I mirrored the files in case someone else is having the same problem:

    Archive.org:
    - Qualcomm_QDLoader_HS-USB_Driver_64bit_Setup.zip
    - [firmware27]WW_ZS630KL_16.1210.1904.75_M2.6.17.14_Phone-user.raw.zip

    Google Drive:
    - Qualcomm_QDLoader_HS-USB_Driver_64bit_Setup.zip
    - [firmware27]WW_ZS630KL_16.1210.1904.75_M2.6.17.14_Phone-user.raw.zip

    MD5:
    - Qualcomm_QDLoader_HS-USB_Driver_64bit_Setup.zip: 7cfe9c89637ba0da3de5b8fe8067c352
    - [firmware27]WW_ZS630KL_16.1210.1904.75_M2.6.17.14_Phone-user.raw.zip: b7ccd66c3e2444fe46d063efc51be5a8

    Thanks for creating this thread, goldman1993.
    1
    Hi OP,
    I have edited the links into first post for you. Enjoy.

    Jerry
    Forum Moderator
    1
    Well, that is not a good sign.

    If you haven't unlocked the bootloader or done anything else naughty to it, maybe it's best to let Asus fix it.

    Yeah, bootloader is locked so there is nothing naughty done to it. Might be a good idea indeed if it's really one of the defective ones
    1
    Hi checkin1991,
    Yes there is a way. You should connect this contacts inside the phone for a moment.
    17574707.png
Our Apps
Get our official app!
The best way to access XDA on your phone
Nav Gestures
Add swipe gestures to any Android
One Handed Mode
Eases uses one hand with your phone