[GUIDE] Qhsusb Dload Workaround [unbrick]

[juancollado2003]

If your Moto G is connecting in qhsusb dload and you assume it is bricked then you can try this and see if this work for you as much worked for me.

1- Take apart the phone
2- Unplug the battery from the board
3- Connect to your usb charger
4- You will see a image like on attachment
5- Without disconnect the charger plug the battery to your board and let it charge for a few minutes
6- Flash your phone in order to update your bootloader

Good Luck

 

[sebastiandg7]

Are you saying this is a solution for lollipop hardbricked devices?

 

[juancollado2003]

Are you saying this is a solution for lollipop hardbricked devices?

I'm saying that if you have a moto g that is connecting on Qhsusb Dload then you have a new option to try

 

[dwensch]

Connecting trough usb without battery does not give any life on the screen... Just black..

 

[juancollado2003]

Connecting trough usb without battery does not give any life on the screen... Just black..

does your phone connect on qhsusb?, how your phone get on that mode?

 

[abeloman]

Any workaround for enter to bootloader (fastboot) with the volume button (-) broken?

I had a bootloop and I can't turn it off, keep rebooting when I keep the power off pressed... I like to enter to fastboot, and then launch a custom recovery

 

[Xup8]

Any workaround for enter to bootloader (fastboot) with the volume button (-) broken?

I had a bootloop and I can't turn it off, keep rebooting when I keep the power off pressed... I like to enter to fastboot, and then launch a custom recovery

With twrp you can reboot to bootloader!

Sent from my XT1032 using Tapatalk

 

[abeloman]

With twrp you can reboot to bootloader!

Sent from my XT1032 using Tapatalk

Yeah, but how access to twrp when my phone is turned off? If I press the power button, it goes to bootloop and then, I can't do anything because the broken button... I have to remove the battery to get out the bootloop (otherwise I have to wait battery discharge)

 

[lucamibel]

Yeah, but how access to twrp when my phone is turned off? If I press the power button, it goes to bootloop and then, I can't do anything because the broken button... I have to remove the battery to get out the bootloop (otherwise I have to wait battery discharge)

using adb on your pc

adb reboot-recovery

 

[PuLKit4xd]

Before i even attempt to do it, how did you end up with QHS-USB mode in phone?
Was it because of bad OTA or something else?

 

[snj12341]

does this work? can anyone confirm?

 

[Crabsi]

Are you saying this is a solution for lollipop hardbricked devices?

Im pretty sure, this is no help for hardbricked phones. https://www.youtube.com/watch?v=qZhAabwi24M
In this video, he did the same, but it wont help, when you have a hardbrick

 

[sahir1993]

Connecting trough usb without battery does not give any life on the screen... Just black..

just connect your mobile to wall charger...

---------- Post added at 07:39 AM ---------- Previous post was at 07:37 AM ----------

If your Moto G is connecting in qhsusb dload and you assume it is bricked then you can try this and see if this work for you as much worked for me.

1- Take apart the phone
2- Unplug the battery from the board
3- Connect to your usb charger
4- You will see a image like on attachment
5- Without disconnect the charger plug the battery to your board and let it charge for a few minutes
6- Flash your phone in order to update your bootloader

Good Luck

you are telling us that we can't flash blank because of this?
&
what is the bootloader version of your MOTO G aka Falcon ?