Unfortunately I don't own a pixel 3... In any case you can try combining my module with Magisk-v18-Taimen-Diag.zip
Unfortunately I don't own a pixel 3... In any case you can try combining my module with Magisk-v18-Taimen-Diag.zip
It's a magisk module?If anyone still wants VoLTE, VoWIFI and Video Calls, check my Thread https://xdaforums.com/apps/magisk/module-snapdragon-source-patch-2-0-t3903647
Found this here while searching for the right string...
I also can't get it to activate the diag port on march update. It was working till feb update. Anyone else ?My device doesn't show up in PDC tool but I can add it in QPST config, where it see's it on port COM3 and recognizes the phone. What am I doing wrong?
Same here, updated to march patch from 2018.dec patch.I also can't get it to activate the diag port on march update. It was working till feb update. Anyone else ?
su
setenforce 0
setprop sys.usb.configfs 1 && setprop sys.usb.config diag,serial_cdev,rmnet_gsi,adb
You got it to work on pixel 3? What rom? Dis you manage to flash mbn? What qpst did you use?This Magisk worked fine even at pixel 3. Thank you.
By the way, I'd like to refer to the changes, but can we attract the source?
You got it to work on pixel 3? What rom? Dis you manage to flash mbn? What qpst did you use?
Thank you for the detailed feedback!You got it to work on pixel 3?
---> yes, got it my pixel 3
What rom?
---> Stock rom (20190305 Released)
blueline:/ $ getprop | grep ro.build.id
[ro.build.id]: [PQ2A.190305.002]
Dis you manage to flash mbn?
--->mbn's Flash has not tried yet.
What qpst did you use? ---> QPST 2.7 Build 460
[How?]
I was able to open a Diag port just by doing the following.
1. flash Magisk-v18.0_Taimen_Diag.zip from TWRP & reboot
2. flash Pixel_2_Diag_Port.zip at Magisk Manager & reboot
3. When the OS starts up Execute the following command from "Android Terminal"
> su
# setprop sys.usb.config diag,serial_cdev,rmnet_gsi,adb
(After flashing Pixel_2_Diag_Port.zip, adb can not connect,
so I needed to execute the command from Terminal on PIXEL 3.)
This should be recognized by QPST:good:
-------------------------------------
I'm not good at English, so I'm using a software for translation to message.
I'm so sorry that I sometimes don't understand conversation or it takes time.
Thank you for your understanding.
You got it to work on pixel 3?
---> yes, got it my pixel 3
What rom?
---> Stock rom (20190305 Released)
blueline:/ $ getprop | grep ro.build.id
[ro.build.id]: [PQ2A.190305.002]
Dis you manage to flash mbn?
--->mbn's Flash has not tried yet.
What qpst did you use? ---> QPST 2.7 Build 460
[How?]
I was able to open a Diag port just by doing the following.
1. flash Magisk-v18.0_Taimen_Diag.zip from TWRP & reboot
2. flash Pixel_2_Diag_Port.zip at Magisk Manager & reboot
3. When the OS starts up Execute the following command from "Android Terminal"
> su
# setprop sys.usb.config diag,serial_cdev,rmnet_gsi,adb
(After flashing Pixel_2_Diag_Port.zip, adb can not connect,
so I needed to execute the command from Terminal on PIXEL 3.)
This should be recognized by QPST:good:
-------------------------------------
I'm not good at English, so I'm using a software for translation to message.
I'm so sorry that I sometimes don't understand conversation or it takes time.
Thank you for your understanding.
meant to ask if you tried pdc and flashing mbn. Sorry for not being clear
---------- Post added at 11:48 PM ---------- Previous post was at 11:33 PM ----------
took it for another try on pixel 3
First pdc tool recognized but wouldnt let me interact
Then would recognize at all
then gives usb driver error I mentioned earlier
Yeah, I was able to do all that stuff earlier too.I'm sorry, I have not tried writing with pdc tool, but download by QPST Software Download and reading and writing by EFS explore are working without problems.
I'm sorry, I have not tried writing with pdc tool, but download by QPST Software Download and reading and writing by EFS explore are working without problems.
I get this when trying to update wwan to be detected by pdc
Any idea or have you had a similar experience?
Magisk doesn't work on Q unless you have pixel 1 or 2 and use canary channel release. The module probably won't work either.I am getting error 1 about modified boot image on Android Q beta when trying to install magisk on TWRP. Is there a way to fix it?
setenforce 0
setprop sys.usb.configfs 1 && setprop sys.usb.config diag,serial_cdev,rmnet_gsi,adb
<boolean name="carrier_volte_available_bool" value="true" />
<boolean name="carrier_wfc_supports_wifi_only_bool" value="true" />
<boolean name="carrier_wfc_ims_available_bool" value="true" />
Able to successfully enable both Airtel India VoLTE and Airtel India VoWiFi on my Google Pixel 2 XL running Android 10 March 2020 update by following steps.
1.Unlock bootloader
2.Fastboot boot twrp img for temporary twrp
3.Install twrp zip from twrp recovery for permanent twrp
4.Flash Magisk-v19.0_Taimen_Diag.zip from twrp
5.turn ON mobile
5.Install app-debug.apk (Magisk) app
6.Flash Pixel 2 Diag Port.zip Module as Magisk Module
7.Flash VoEnabler Module as Magisk Module
8.Reboot
Done