How To Guide [GUIDE][REALME 8][Unofficial] New method Unlock Bootloader, Flash TWRP and Root [RMX3085]

Search This thread


Jan 4, 2021
hi guys, is there a way to undo this python based root method.

i would like Flash A12 and unlock fastboot per deeptest.apk

thx for answer


Mar 18, 2016
Please help when i connect my realme 8 with holding vol +& - key together to my pc.
It continuously connect and disconnect again and again.
After leaving the key my phone automatically switched on.
I can't even charge my phone in switch off state because when i connect it to pc or charger it is power on automatically.

Sorry for bad english


Apr 18, 2016
Most of them would have got their boot loaders unlocked officially by now. But couldn't find a step by step instructions anywhere to root the device in Android 12 running RUI3.0.

After trying over 10 times in different firmware A26.C05,C07 back to A22 as this is the only Rom where it doesn't say Dm-verity error & freezes up after 5-7 reboots
Bro flash Thailand rom will get flashing instruction on Stark's upgrade/downgrade thread..use sp flash tool..after flashing Thailand rom you can use deeptest to unlock bootloader...after unlocking you can flash your regional rom again.. bootloader will stay unlocked


Sep 30, 2022
Hey I am getting this issue I don't know what to do, Please help me


Sep 30, 2022
my device is showing me realme logo and then booting again in a loop
how to fix this

showing something like dm veriety corruption
your device is currupt


Sep 30, 2022
hey i am not understanding what to do after installing the MAgisk apk ,please help
HOW to know which patch file i have to download

Top Liked Posts

  • There are no posts matching your filters.
  • 9
    Hello guys!
    As you all know that there is no deeptest.apk available for our device.
    So we have to unlock our bootloader unofficially!

    NOTE: IF U HAVEN'T UPGRADED AFTER A19 ROM THEN SKIP FIRST PART !!! And follow the instructions from 2nd part.

    Also this method only works on RUI 2.0

    * This Guide is tested and working.
    * However I am not responsible for bricked devices, dead SD cards,
    * thermonuclear war, or you getting fired because the alarm app failed.
    * Please do some research if you have any concerns about unlocking and flashing TWRP
    * Before flashing it! YOU are choosing to make these modifications.

    So Lets Begin the Process:

    1. Flashing A19 Partitions:

    • PC or Laptop
    • Internet connection
    • Realme 8
    • USB cable
    • Take a backup of your data, Just in case if any error happens.
    Windows Method
    Bypass Tools Pack - (DRIVER AND BYPASS FILES)
    SP Flash Tool

    Decrypted OFP (OPPO FIRMWARE PACKAGE) Partitions:

    Install Python from Windows Store
    libusb-win32 - Having Issues? Use this.
    Get usbdk installer (.msi) from here and install it


    1) Extract the zip
    2) Go to driver folder, find the .inf file right click and press install.

    3)Download this file and install it, after installing power off phone and connect to pc while holding Vol+- (don't leave the buttons after connecting) . You might need this driver as well if it's not detected.


    Press next, connect your device to PC while holding Vol+- buttons (your device needs to be powered off, and don't leave the buttons) and you will see the mtkdriver down below. Install it.

    Choose MediaTek USB Port and install it.

    4)Then run the brom.bat under Bypass folder.
    Screenshot (63).png

    5) Now power off the phone and connect the phone while holding volume + and - (Don't leave the buttons until the bypass is done)

    6)After the above step Go into Flash Tool folder and open the SPFlash tool and launch flash_tool.exe

    7) Click on Options>Options and go to Connections and select UART and set Baud Rate to 921600

    8)Now in Sp flash tool select the scatter file which you have extracted from and make sure that prealoder, lk, and lk2 is selected.
    Screenshot (49).png

    9) You don't need to select auth file as authorization is disabled. Once you do it, it should look like this. ALWAYS MAKE SURE DOWNLOAD ONLY MODE IS SELECTED! DON'T SELECT OTHER MODES!

    Make SURE "Download Only" is selected. Don't select ANYTHING ELSE! You will lose your IMEIs, Serial Numbers, Capability of Hardware Attestation etc. if you choose "Format data + Download" make SURE you selected "Download Only".

    10) Now, you can start downloading with the button and after that a checkmark will appear. You can reboot your phone
    After flashing it should look like this. Download has been complete.


    • PC or Laptop
    • Internet connection
    • USB cable
    • Take a backup of your data since it'll be wiped
    • Go to About phone > Version and tap build number 7 times
    • Go to Settings > advanced settings > Developer options and turn on OEM unlocking and USB debugging
    • Install USBDk
    • Download this and extract :
    • Now open command prompt in that folder
    • Screenshot (50).png
    • Now type pip3 install -r requirements.txt and hit enter
    • Now type python mtk e metadata,userdata,md_udc hit enter - This command wipes data
    • Then power off your phone and hold both volume buttons and connect usb cable (DON'T LEAVE THE BUTTONS, KEEP THEM HOLDING THROUGHOUT THE PROCESS) - This boots device into BROM mode
    • Now type python mtk da seccfg unlock This will unlock the bootloader (If you face waiting for device issue then unplug the device and plug in the device again with holding volume buttons, also don't leave the buttons)
    • IMG_20211201_212023_350.jpg
    • After this unplug your phone and turn it on (It'll show your device dm verity corrupted and first boot might take 5-10 mins, don't panic)
    • Now your bootloader is unlocked
    • photo_2022-01-10_18-44-11.jpg
    • Due to realme's limitations you still can't access fastboot after unlocking via this method


    • Install This Magisk apk

    • Download Patched Boot image (According to your device firmware) from the link and put them in MTK client folder.
    • Now in pc type python mtk w boot,vbmeta boot.patched,vbmeta.img.empty hit enter
    • Then power off your phone and connect usb while holding both volume buttons (and don't leave them)
    • IMG_20211201_213448_962 (2).jpg
    • Now disconnect and reboot phone
    • Now open Magisk app
    • photo_2022-01-10_18-44-27.jpg



    • Download TWRP - From here and extract it.
    • Download and install Flashify app
    • Open Flashify and grant root permission
    • Select Recovery image from the extracted twrp folder and install it
    • photo_2022-01-10_18-53-11.jpg
    • After flashing is done click reboot now or you can reboot to recovery via magisk app
    • photo_2022-01-10_18-43-45.jpg
    "Congrats Now we have working TWRP in Realme 8, Enjoy :) "


    1. Me @Saksham Antil (aka Tony Stark) for this guide and Testing
    2. @Engrudhy for older guide
    3. @Skyhuppa for making TWRP
    4. Elias for finding out the way to ubl
    5. B Kerler fot MTKClient
    Stock boot Image (to revert root)

    If you face any issues lem me know down below
    Woohoo finally rooted new. Thanks for the detailed guide
    Can I upgrade magisk app???
    Yeah you can, but stay on alpha version don't go for stable.