[Guide][Recovery][Unofficial] TWRP v3.5.0 for Samsung Galaxy A50

Search This thread

redymedan

Senior Member
TWRP v3.5.0 for Samsung Galaxy A50. I JUST UPGRADED IT to v3.5.0 based on TWRP v3.4.0 One UI 2.5 BTL1 firmware by mohitmallick17
Tested install GSI and Custom rom FreshROMs by TenSeventy7 ( recommended custom rom to try ). Tested rooting SM-A505F BTL1 firmware. Please tell us if it works for other models.


Flash TWRP Instructions:

  1. Make sure the bootloader are unlocked, OEM unlock option is grey out
  2. Enter Download Mode : Turn Power Off. Press and hold Volume Up + Volume Down key together, while pressing these keys, connect the phone to computer, then press volume up once.
  3. Open ODIN, IMPORTANT!: Uncheck “Auto Reboot” in Options!
  4. Flashing TWRP_v3.5.0_A505_BTL1_Magisk.tar as AP in ODIN, then click start.
  5. Magisk is now successfully flashed to your device! Several steps before you can properly use the device.
  6. DO NOT SKIP THIS STEP! Press and hold Volume Down + Power Key, when the screen blank quickly press and hold Volume Up + Power key, when Samsung Logo appears release Power key only, keep pressing Volume Up key until TWRP Recovery Mode Appears.
  7. Select Wipe -> Format data, type 'yes' and confirm
  8. Select Install - select multidisabler-samsung-2.6.zip Swipe to confirm Flash
  9. Select Reboot to System
  10. When SAMSUNG logo appears wait for a few minutes or more then press and hold volume down + power key until the screen blank
  11. Setup the phone
Rooting if necessary
  1. First time Restart or Power off, make sure the OEM unlocking options is grey out
  2. Enter TWRP recovery : Turn Power Off. Press and hold Volume Up key + Power Key, When SAMSUNG logo appears release Power Key only, keep pressing Volume Up key until TWRP recovery appears.
  3. Select Reboot to - Recovery
  4. Install Magisk Manager
  5. Connect to Internet
  6. Open Magisk Manager, it will ask to do additional setups. Let it do its job and the app will automatically reboot your device.
  7. Done!
DOWNLOAD
Credit to mohitmallick17
 
Mar 29, 2015
9
0
I managed to root Successfully but after additional setup the phone rebooted after 5 secs, it was on but still asked for additional setup, suddenly after updating from Magisk v8.0.5 to Magisk v22 I lost root now I tried to boot device it failed to turn on but now in download mode with error VBmeta: No sign info
 

johanw910

New member
Mar 17, 2011
2
1
Will this work on an A50 witn the Android 11/ OneUI 3.1 update? Because I got nothing but errors and bootloops trying to root that, while I had no problems with an Android 10 version.
 

PetiHun08

Senior Member
Apr 22, 2021
69
5
Huawei P9 Lite
Sony Xperia L1
IF i dont have an sd card can i sideload
TWRP v3.5.0 for Samsung Galaxy A50. I JUST UPGRADED IT to v3.5.0 based on TWRP v3.4.0 One UI 2.5 BTL1 firmware by mohitmallick17
Tested install GSI and Custom rom FreshROMs by TenSeventy7 ( recommended custom rom to try ). Tested rooting SM-A505F BTL1 firmware. Please tell us if it works for other models.


Flash TWRP Instructions:

  1. Make sure the bootloader are unlocked, OEM unlock option is grey out
  2. Enter Download Mode : Turn Power Off. Press and hold Volume Up + Volume Down key together, while pressing these keys, connect the phone to computer, then press volume up once.
  3. Open ODIN, IMPORTANT!: Uncheck “Auto Reboot” in Options!
  4. Flashing TWRP_v3.5.0_A505_BTL1_Magisk.tar as AP in ODIN, then click start.
  5. Magisk is now successfully flashed to your device! Several steps before you can properly use the device.
  6. DO NOT SKIP THIS STEP! Press and hold Volume Down + Power Key, when the screen blank quickly press and hold Volume Up + Power key, when Samsung Logo appears release Power key only, keep pressing Volume Up key until TWRP Recovery Mode Appears.
  7. Select Wipe -> Format data, type 'yes' and confirm
  8. Select Install - select multidisabler-samsung-2.6.zip Swipe to confirm Flash
  9. Select Reboot to System
  10. When SAMSUNG logo appears wait for a few minutes or more then press and hold volume down + power key until the screen blank
  11. Setup the phone
Rooting if necessary
  1. First time Restart or Power off, make sure the OEM unlocking options is grey out
  2. Enter TWRP recovery : Turn Power Off. Press and hold Volume Up key + Power Key, When SAMSUNG logo appears release Power Key only, keep pressing Volume Up key until TWRP recovery appears.
  3. Select Reboot to - Recovery
  4. Install Magisk Manager
  5. Connect to Internet
  6. Open Magisk Manager, it will ask to do additional setups. Let it do its job and the app will automatically reboot your device.
  7. Done!
DOWNLOAD
Credit to mohitmallick17
if i have no sdcard can i sideload multidisabler?
 

PetiHun08

Senior Member
Apr 22, 2021
69
5
Huawei P9 Lite
Sony Xperia L1
TWRP v3.5.0 for Samsung Galaxy A50. I JUST UPGRADED IT to v3.5.0 based on TWRP v3.4.0 One UI 2.5 BTL1 firmware by mohitmallick17
Tested install GSI and Custom rom FreshROMs by TenSeventy7 ( recommended custom rom to try ). Tested rooting SM-A505F BTL1 firmware. Please tell us if it works for other models.


Flash TWRP Instructions:

  1. Make sure the bootloader are unlocked, OEM unlock option is grey out
  2. Enter Download Mode : Turn Power Off. Press and hold Volume Up + Volume Down key together, while pressing these keys, connect the phone to computer, then press volume up once.
  3. Open ODIN, IMPORTANT!: Uncheck “Auto Reboot” in Options!
  4. Flashing TWRP_v3.5.0_A505_BTL1_Magisk.tar as AP in ODIN, then click start.
  5. Magisk is now successfully flashed to your device! Several steps before you can properly use the device.
  6. DO NOT SKIP THIS STEP! Press and hold Volume Down + Power Key, when the screen blank quickly press and hold Volume Up + Power key, when Samsung Logo appears release Power key only, keep pressing Volume Up key until TWRP Recovery Mode Appears.
  7. Select Wipe -> Format data, type 'yes' and confirm
  8. Select Install - select multidisabler-samsung-2.6.zip Swipe to confirm Flash
  9. Select Reboot to System
  10. When SAMSUNG logo appears wait for a few minutes or more then press and hold volume down + power key until the screen blank
  11. Setup the phone
Rooting if necessary
  1. First time Restart or Power off, make sure the OEM unlocking options is grey out
  2. Enter TWRP recovery : Turn Power Off. Press and hold Volume Up key + Power Key, When SAMSUNG logo appears release Power Key only, keep pressing Volume Up key until TWRP recovery appears.
  3. Select Reboot to - Recovery
  4. Install Magisk Manager
  5. Connect to Internet
  6. Open Magisk Manager, it will ask to do additional setups. Let it do its job and the app will automatically reboot your device.
  7. Done!
DOWNLOAD
Credit to mohitmallick17
Hmm... Another a505fn but ds model. Im stuck on boootloader warning. Can somebody help? (i flashed multidisabler and rebooted to system
 

Top Liked Posts

  • There are no posts matching your filters.
  • 3
    TWRP v3.5.0 for Samsung Galaxy A50. I JUST UPGRADED IT to v3.5.0 based on TWRP v3.4.0 One UI 2.5 BTL1 firmware by mohitmallick17
    Tested install GSI and Custom rom FreshROMs by TenSeventy7 ( recommended custom rom to try ). Tested rooting SM-A505F BTL1 firmware. Please tell us if it works for other models.


    Flash TWRP Instructions:

    1. Make sure the bootloader are unlocked, OEM unlock option is grey out
    2. Enter Download Mode : Turn Power Off. Press and hold Volume Up + Volume Down key together, while pressing these keys, connect the phone to computer, then press volume up once.
    3. Open ODIN, IMPORTANT!: Uncheck “Auto Reboot” in Options!
    4. Flashing TWRP_v3.5.0_A505_BTL1_Magisk.tar as AP in ODIN, then click start.
    5. Magisk is now successfully flashed to your device! Several steps before you can properly use the device.
    6. DO NOT SKIP THIS STEP! Press and hold Volume Down + Power Key, when the screen blank quickly press and hold Volume Up + Power key, when Samsung Logo appears release Power key only, keep pressing Volume Up key until TWRP Recovery Mode Appears.
    7. Select Wipe -> Format data, type 'yes' and confirm
    8. Select Install - select multidisabler-samsung-2.6.zip Swipe to confirm Flash
    9. Select Reboot to System
    10. When SAMSUNG logo appears wait for a few minutes or more then press and hold volume down + power key until the screen blank
    11. Setup the phone
    Rooting if necessary
    1. First time Restart or Power off, make sure the OEM unlocking options is grey out
    2. Enter TWRP recovery : Turn Power Off. Press and hold Volume Up key + Power Key, When SAMSUNG logo appears release Power Key only, keep pressing Volume Up key until TWRP recovery appears.
    3. Select Reboot to - Recovery
    4. Install Magisk Manager
    5. Connect to Internet
    6. Open Magisk Manager, it will ask to do additional setups. Let it do its job and the app will automatically reboot your device.
    7. Done!
    DOWNLOAD
    Credit to mohitmallick17
    1
    <ID:0/006> Added!!
    <ID:0/006> Odin engine v(ID:3.1303)..
    <ID:0/006> File analysis..
    <ID:0/006> Total Binary size: 67 M
    <ID:0/006> SetupConnection..
    <ID:0/006> Initialzation..
    <ID:0/006> Get PIT for mapping..
    <ID:0/006> Firmware update start..
    <ID:0/006> NAND Write Start!!
    <ID:0/006> SingleDownload.
    <ID:0/006> boot.img
    <ID:0/006> recovery.img
    <ID:0/006> vbmeta.img
    <ID:0/006> RQT_CLOSE !!
    <ID:0/006>
    <ID:0/006> Complete(Write) operation failed.
    <OSM> All threads completed. (succeed 0 / failed 1)
    <ID:0/006> Removed!!
    Try this version for exynos,it workd for mee.
    1
    Awesome. Thanks alott.

    Flashed successfully.
    You whill also nead to flash this file,so you dont lose twrp.