How To Guide [GUIDE][ROOT][MAGISK] How to Root Nord 2T with Magisk without TWRP

[PattasuBalu]

I had the same problem with A.15. Wifi just would not work anymore.
As I bricked my device and received an exchange device, I don't know if the problem still exists on A.16.

I too had this issue but going back to stock rom without root and rooting again fixed it.

 

[rokkdroid]

I too had this issue but going back to stock rom without root and rooting again fixed it.

Good to know!

 

[r-ichard]

I had the same problem with A.15. Wifi just would not work anymore.
As I bricked my device and received an exchange device, I don't know if the problem still exists on A.16.

Yes it's clearly related to A.15 I just updated to 16 and wifi and bluetooth are still working after flashing the patched image.

 

[garylawwd]

I was on a.15 and rooted no problem whatsoever.
Don't know why you guys had that issue.
Anyways glad you got up and running again with root on A.16

 

[rokkdroid]

Any recommendations for which way to go?
Use this method or go via TWRP?

EDIT: TWRP works like charm

 

[garylawwd]

Stock boot for Indian CPH2401_11_A.17 added to OP

 

[Danyddd]

Hello everyone hope you are all keeping well.

Since there isn't a TWRP Recovery for Nord 2T (yet) and

Since I believe that many of you don't know about this, I've decided to share the steps I've done in order to root the Nord 2T.

I cannot be responsible if you brick your device. Your phone, your choices, your responsibility!​

1 - Unlock the bootloader (if you haven't done it already...beware that this will erase all of your user data). To do so, you must:

• Enable developer options
• Enable the "OEM unlocking" option
• Enable USB debugging
• Have both adb and fastboot, from SDK Platform Tools available on your PC
• Connect your phone to your PC using the USB cable and run the following commands:

adb devices

(just to make sure that your phone is, in fact, recognized by your PC and that you're able to run adb commands)

adb reboot bootloader

(so your phone will reboot into fastboot mode)

fastboot flashing unlock

(device should now unlock)

fastboot reboot

(device reboots with an unlocked bootloader and data partition wiped so set up the device from scratch again)

2 - Download Nord2T stock boot.img that you may find later on this post, that matches your current build.

• Copy the boot.img to your devices internal memory
• Leave a copy of it on your PC (on the same folder you have adb and fastboot...you never know if you will need to use it again in the future...to restore the stock boot.img, aka revert to stock...)

Spoiler: Global Build boot.img's

Stock boot CPH2399_11_A.07 (did not extract it and can't find the firmware file to be able to download and extract, if someone could please upload a link to it on this thread I would sincerely appreciate it)

Stock Boot CPH2399_11_A.09

Stock Boot CPH2399_11_A.11

Stock Boot CPH2399_11_A.14

Stock Boot CPH2399_11_A.15

Stock Boot CPH2399_11_A.16

Spoiler: IND Build boot.img's

Stock Boot CPH2401_11_A.11

Stock Boot CPH2401_11_A.13

Stock Boot CPH2401_11_A.14

Stock Boot CPH2401_11_A.15

Stock Boot CPH2401_11_A.16

Stock Boot Cph2401_11_A.17

3 - Download latest Magisk Manager from HERE and install it on your phone

4 - Open Magisk Manager App and press:

• Install
• Select and Patch a File
• Browse to the path where you saved stock boot.img and select it

Magisk Manager will now patch the boot image and store it in [Internal Storage]/Download/magisk_patched.img

5 - Copy the patched boot image from your device to your PC (Store it on the same folder where you have adb and fastboot)

6 - Flash the patched boot image to your phone by running these commands (remember, you must have patched boot image on the same folder you have adb and fastboot and, of course, your device must be connected to your PC...)

adb reboot bootloader

​

fastboot flash boot magisk_patched.img

​

fastboot reboot

​

7 - After the phone boots up, hopefully with a normal boot (almost feels like nothing happened....), install/open Magisk Manager App again and watch Magisk doing it's magic!

8 - Enjoy!

All credits goes to topjohnwu and his incredible work with Magisk.

Thank's.

1. Is the boot process reversible ?
2. Will the boot process prevent the ability of Google Pay ?
3. Will the boot process allow me to use a call recording feature - This is what i am actually need. [It is legal use in my country]

 

[Danyddd]

Hello everyone hope you are all keeping well.

Since there isn't a TWRP Recovery for Nord 2T (yet) and

Since I believe that many of you don't know about this, I've decided to share the steps I've done in order to root the Nord 2T.

I cannot be responsible if you brick your device. Your phone, your choices, your responsibility!​

1 - Unlock the bootloader (if you haven't done it already...beware that this will erase all of your user data). To do so, you must:

• Enable developer options
• Enable the "OEM unlocking" option
• Enable USB debugging
• Have both adb and fastboot, from SDK Platform Tools available on your PC
• Connect your phone to your PC using the USB cable and run the following commands:

adb devices

(just to make sure that your phone is, in fact, recognized by your PC and that you're able to run adb commands)

adb reboot bootloader

(so your phone will reboot into fastboot mode)

fastboot flashing unlock

(device should now unlock)

fastboot reboot

(device reboots with an unlocked bootloader and data partition wiped so set up the device from scratch again)

2 - Download Nord2T stock boot.img that you may find later on this post, that matches your current build.

• Copy the boot.img to your devices internal memory
• Leave a copy of it on your PC (on the same folder you have adb and fastboot...you never know if you will need to use it again in the future...to restore the stock boot.img, aka revert to stock...)

Spoiler: Global Build boot.img's

Stock boot CPH2399_11_A.07 (did not extract it and can't find the firmware file to be able to download and extract, if someone could please upload a link to it on this thread I would sincerely appreciate it)

Stock Boot CPH2399_11_A.09

Stock Boot CPH2399_11_A.11

Stock Boot CPH2399_11_A.14

Stock Boot CPH2399_11_A.15

Stock Boot CPH2399_11_A.16

Spoiler: IND Build boot.img's

Stock Boot CPH2401_11_A.11

Stock Boot CPH2401_11_A.13

Stock Boot CPH2401_11_A.14

Stock Boot CPH2401_11_A.15

Stock Boot CPH2401_11_A.16

Stock Boot Cph2401_11_A.17

3 - Download latest Magisk Manager from HERE and install it on your phone

4 - Open Magisk Manager App and press:

• Install
• Select and Patch a File
• Browse to the path where you saved stock boot.img and select it

Magisk Manager will now patch the boot image and store it in [Internal Storage]/Download/magisk_patched.img

5 - Copy the patched boot image from your device to your PC (Store it on the same folder where you have adb and fastboot)

6 - Flash the patched boot image to your phone by running these commands (remember, you must have patched boot image on the same folder you have adb and fastboot and, of course, your device must be connected to your PC...)

adb reboot bootloader

​

fastboot flash boot magisk_patched.img

​

fastboot reboot

​

7 - After the phone boots up, hopefully with a normal boot (almost feels like nothing happened....), install/open Magisk Manager App again and watch Magisk doing it's magic!

8 - Enjoy!

All credits goes to topjohnwu and his incredible work with Magisk.

 

[Mind_trickx]

hey , i don't know what i'm doing wrong ..
mij adb responds but whenever do the adb fastboot command its a black screen with small leters in de the middle of the screen saying fastboot=mode and then it disconnects from my pc ? what am i doing wrong

 

[Danyddd]

I try to root my Nord 2T.
After the Command -fastboot flashing unlock- the respone is

<waiting for devices>​

I've installed both of the drivers from https://gsmusbdriver.com/oneplus-nord-2t-5g#driver1 but even if I restart the PC, I still get <waiting for devices>.

There an error on the android ADB interface driver [ This Device Cannot Start (Code 10) ]

How can I fix it ?

 

[garylawwd]

Stock boot for Global CPH2399_11_A.17 added to OP
Still haven't received Indian version CPH2401_11_A.18 in Oxygen Updater app. When I do I will upload the boot img's for Indian variant as well

 

[bingchillin]

When I use the command "adb reboot bootloader" my screen goes black and freezes just with the words "flashboot mode" on, if I try to continue with the next command it just says "waiting for any device" but does not progress.
Any help?

 

[rokkdroid]

When your screen goes black, it should say fastboot mode, not flashboot mode.
That means you are in fastboot mode and need to use fastboot instead of adb.

Try

fastboot devices

If there is no device listed, you need to update the drivers.

 

[bingchillin]

When your screen goes black, it should say fastboot mode, not flashboot mode.
That means you are in fastboot mode and need to use fastboot instead of adb.

Try

fastboot devices

as command.
If there is no device listed, you need to update the drivers.

it may say that, I'm dyslexic and the small writting makes it hard to tell lol

 

[rokkdroid]

I know, I got old eyes ^^

 

[bingchillin]

I know, I got old eyes ^^

It's definitely a blank screen which just says "Fastboot mode".
When I imput the next command it cmd just says <waiting for device>

 

[rokkdroid]

If your command is

fastboot devices

and no device is found, you need to update the drivers on your pc.

 

[bingchillin]

If your command is

fastboot devices

and no device is found, you need to update the drivers on your pc.

adb devices shows my device.

when I use fastboot devices nothing happens at all

 

[rokkdroid]

It's because you do not have the correct drivers for fastboot.

This video helped me

 

[bingchillin]

It's because you do not have the correct drivers for fastboot.

This video helped me

I tried this, still doesn't work.