[Guide] Root Pixel 4a (5G) with Magisk + Unlock Bootloader + Pass SafetyNet + More

Search This thread

WhiteAsIce

Senior Member
Dec 1, 2010
88
3
Google Pay suddenly no longer works. It was fine after I updated to Android 13. My Play Store still says device is certified, but after I repeat the steps in the first post, Google Pay says that device cannot be used for contactless pay. Anyone else encountering this?
 

Homeboy76

Senior Member
Aug 24, 2012
3,434
1,990
Google Pixel XL
Google Pixel 7 Pro

WhiteAsIce

Senior Member
Dec 1, 2010
88
3
No, I had been using the one posted in the first post here. I will download the mod you linked and try it out.
 

Homeboy76

Senior Member
Aug 24, 2012
3,434
1,990
Google Pixel XL
Google Pixel 7 Pro
No, I had been using the one posted in the first post here. I will download the mod you linked and try it out.
Ok, this is what you need to do to get Google Pay/Wallet working again:
  1. Install Displax | Release v2.3.1-MOD · Displax/safetynet-fix · GitHub
  2. Install Fox2Code/Fox
    Magisk Module Manager

    (This is the new Magisk Module repository.)
  3. After you have installed the SafetyNet Mod from 1. or 2. above
    • Clear Google Services Framework data
    • Google Pay/Wallet data
    • Google Play Store data
    • Reboot
    • Wait for Google Pay/Wallet to start working again: It may take 24 hours to start working again.

~ ~ ~ ~ OP, Updated ~ ~ ~ ~
 
Last edited:

WhiteAsIce

Senior Member
Dec 1, 2010
88
3
Okay, downloaded & installed the two new things. Was able to add my credit card back. I'll check in a few days to see if it still works, or if it goes back to saying my device can't be used.
 

Droid9684

Senior Member
May 9, 2011
505
39
Hello I still can't flash twrp to my Pixel on A13! Between using Platform tools on Mac and Windows commands just wont work! "No such file or directory exists"
 
Last edited:

Homeboy76

Senior Member
Aug 24, 2012
3,434
1,990
Google Pixel XL
Google Pixel 7 Pro
Hello I still can't flash twrp to my Pixel on A13! Between using Platform tools on Mac and Windows commands just wont work! "No such file or directory exists"
@Droid9684,
AFAIK, TWRP has not been developed for Android 13.

What error are you getting when you try to flash the magisk_patched...img?

Suggestion
Verify, you downloaded and installed the latest version of Mac/Windows SDK Platform-tools r 33.0.3.

Move the magisk_patched...img to the SDK Platform-tools folder. Open that folder and type this command:

Mac
./fastboot flash boot magisk_patched...img
Windows
fastboot flash boot magisk_patched...img

Note: This Install and Use ADB and Fastboot on Mac guide, might help you use SDK Platform-tools on your Mac.
 
Last edited:

Droid9684

Senior Member
May 9, 2011
505
39
@Droid9684,
AFAIK, TWRP has not been developed for Android 13.

What error are you getting when you try to flash the magisk_patched...img?

Suggestion
Verify, you downloaded and installed the latest version of Mac/Windows SDK Platform-tools r 33.0.3.

Move the magisk_patched...img to the SDK Platform-tools folder. Open that folder and type this command:

Mac
./fastboot flash boot magisk_patched...img
Windows
fastboot flash boot magisk_patched...img

Note: This Install and Use ADB and Fastboot on Mac guide, might help you use SDK Platform-tools on your Mac.

I was able to root it by using command fastboot flash boot changing the command and name to master root img from magisk name.

Is there an alternative recovery I can use for this phone?

Also i'm finding it lags while streaming. Is this because of the ram useage?

I was able to install a debloater magisk module app this is only way im able to remove system apps.
 

Homeboy76

Senior Member
Aug 24, 2012
3,434
1,990
Google Pixel XL
Google Pixel 7 Pro
I was able to root it by using command fastboot flash boot changing the command and name to master root img from magisk name.

Is there an alternative recovery I can use for this phone?

Also i'm finding it lags while streaming. Is this because of the ram useage?

I was able to install a debloater magisk module app this is only way im able to remove system apps.
AFAIK, there is no alternate recovery for this phone with Android 13.
 
Last edited:

Droid9684

Senior Member
May 9, 2011
505
39
AFAIK, there is no alternate recovery for this phone with Android 13.
So my next question would be do I return this device and get Pixel 5? Theres twrp support for it and it seems better supported according to xda forums. Or do I go with like another Samsung device as I have a S20+ as my main?

And I've had a bit of lag while trying to live stream on Pixel 4a 5G! Not sure why tho!
 
Last edited:

Homeboy76

Senior Member
Aug 24, 2012
3,434
1,990
Google Pixel XL
Google Pixel 7 Pro
So my next question would be do I return this device and get Pixel 5? Theres twrp support for it and it seems better supported according to xda forums. Or do I go with like another Samsung device as I have a S20+ as my main?

And I've had a bit of lag while trying to live stream on Pixel 4a 5G! Not sure why tho!
TWRP for Android 13, has not been developed. If the Android version on the phone is 13, It doesn't matter which phone you own: Pixel/Pixel 2/Pixel 3/Pixel 3a/ Pixel 4/ Pixel 4a/Pixel 4a5(G)/pixel, 5/Pixel5a/Pixel5a5(G)/Pixel6/Pixel 6a/Pixel 6 Pro, Samsung, etc.
TWRP cannot be installed.
 
Last edited:

Kal-El7

Senior Member
Nov 6, 2012
1,046
783
Hello,

I am aware that JoshuaDoes came out with an unofficial TWRP recovery for bramble nearly 9 or 10 months ago, early January. However, since then is there an official recovery app that I can use for my Pixel 4A5G running Android 11 (eleven) on AOSP? I have used Magisk on this just fine on Android 11 and I want to stay on Android 11 AOSP. I had to replace my Pixel 4a5G with another one through my cellular's insurance claim. I came on this thread to remind myself the process for getting Magisk installed. But I never bothered to revisit TWRP after having used it for many years in my past devices I've had over the years. It is just only now, starting with the Pixel 4a5G, that I wanted to explore putting this recovery (or any other official recovery) onto my Pixel 4a5G only to now realize that there hadn't been a recovery released for this Pixel 4a5G.

Any thoughts?

Thanks!
 

Homeboy76

Senior Member
Aug 24, 2012
3,434
1,990
Google Pixel XL
Google Pixel 7 Pro
Hello,

I am aware that JoshuaDoes came out with an unofficial TWRP recovery for bramble nearly 9 or 10 months ago, early January. However, since then is there an official recovery app that I can use for my Pixel 4A5G running Android 11 (eleven) on AOSP? I have used Magisk on this just fine on Android 11 and I want to stay on Android 11 AOSP. I had to replace my Pixel 4a5G with another one through my cellular's insurance claim. I came on this thread to remind myself the process for getting Magisk installed. But I never bothered to revisit TWRP after having used it for many years in my past devices I've had over the years. It is just only now, starting with the Pixel 4a5G, that I wanted to explore putting this recovery (or any other official recovery) onto my Pixel 4a5G only to now realize that there hadn't been a recovery released for this Pixel 4a5G.

Any thoughts?

Thanks!
No TWRP, no thoughts.
 
  • Like
Reactions: Kal-El7

TophFR

Member
Nov 4, 2012
8
0
Sorry if this has been asked before but... Which version/canal of Magisk is required for rooting Android 13 ? Is the latest stable one OK?
 

Top Liked Posts

  • There are no posts matching your filters.
  • 22
    [Guide] Root Pixel 4a (5G) with Magisk + Unlock Bootloader + Pass SafetyNet + More
    Android Security Bulletin—November 2022
    Pixel Update Bulletin—November 2022

    Introduction
    This Guide is for Pixel 4a 5(G) owners that want to Root their phone, and enjoy the benefits of rooting it. The Guide is divided into three parts: Information, Instructions, and Other.

    ~ ~ ~ Part I - INFORMATION ~ ~ ~
    1. Disclaimer

      • I assume no responsibility for the malfunctioning/bricking of your phone.
      • The order of listed items i.e., Custom Kernels, Custom ROMS, etc. Does not indicate my preference for them. It is your responsibility to do the research before selecting an item.
    2. Prerequisites

    3. Update(s)

    4. NEW

    5. My Other Guides
    6. Credits/Thanks/Recognitions

      • @creezalird- Flash Android 12 factory image.
      • Those I may have, inadvertently, forgotten.
    ~ ~ ~ Part II - INSTRUCTIONS ~ ~ ~
    (The Instructions listed below are not steps, they are individual sets of instructions.)

    1. Unlock Bootloader/Return Phone to Stock/Lock Bootloader

      • Unlock Bootloader

        1. Notes:
          • This will erase all user data from the device!
          • Backup your data
        2. Activate Developer Options: Tap Settings > About Phone > Tap Build Number 7 times or until you see you are a Developer. Tap back > System > Advanced > Developer Options. Enable OEM Unlock and, USB Debugging.
        3. Boot fastboot mode
        4. Connect the phone to the Computer with USB cord.
        5. Open a Command Prompt on your computer and type fastboot flashing unlock and press enter.
        6. You should see a request for confirmation on your phone, use the volume keys to scroll and the power key to select.
        7. Allow the process to complete and then type fastboot reboot at the Command Prompt and press enter.
        8. When your phone reboots disconnect your usb cable.
        9. Notes:
          • After unlocking your bootloader, you'll see a warning: The bootloader is unlocked and... You will see this warning until, you relock the bootloader.
          • Do not relock your bootloader until you have returned the device to Stock.
      • Return Phone to Stock

        1. Backup your data/Internal storage
        2. Open Settings, tap System > Advanced > Reset Options > Erase all data (factory reset)
        3. Note: If you are selling or trading in the phone stop here.
        4. Log in
        5. Set up phone
      • Lock Bootloader

        1. Notes:
          • Return the phone to Stock before locking the bootloader, failure to do so could brick your phone
          • This will erase all user data from the device!
        2. Boot fastboot mode
        3. Open a Command Prompt in the SDK Platform- tools folder, and type this at the Prompt: fastboot flashing lock
        4. You should see a request for confirmation on your phone, use the volume keys to scroll and the power key to select.
        5. Allow the process to complete, then type this at the Command Prompt: fastboot reboot
        6. Enable Developer Options: Settings > About phone > Tap Build number 7 times or until you see 'you are a developer'.
        7. Tap Back > Developer options and toggle OEM Unlock off.
    2. Install/Update Factory Image keep data, wipe data, or use @badabing2003 PixelFlasher

      • Important Note(s):
        1. If you want to Upgrade to Android 13 or update the Factory Image without wiping your phone and your phone is rooted. Open Magisk and delete all the modules or uninstall Magisk. Do Flash Factory Image Keep Data (below).
        2. Always verify you have the latest version of SDK Platform-Tools installed on your computer before installing the Factory Image: Pixel 4a 5(G) - bramble.
        3. If you get an error: while flashing, try one of these options:
          • Change the USB port to a non charging USB port.
          • Change the USB cord.
          • Change Computers.
        4. If you phone bootloops
          • Press the Power button until the phone turns off.
          • Press the Power and Volume Down to boot the bootloader.
          • Open a Command Prompt in the SDK-Platform-tools folder or the folder that has adb.exe in it, and type adb wait-for-device shell magisk --remove-modules
          • fastboot Reboot
        5. Backup your data
        6. Download the latest Factory Image: Pixel 4a 5(G) - bramble to your Computer.
        7. Go to Part II - INSTRUCTIONS => 4. Extract Files from the FactoryImage/Flash boot.img and extract the flash-all.bat file.
      • Flash Factory Image Keep Data

        • Navigate to the folder you extracted the Factory Image to and open the flash-all.bat file with a file editor i.e., Notepad app and edit the flash-all.bat file:
          1. Change this line: fastboot -w update image-redfin-aa1a.999999.999.zip
          2. to this: fastboot update image-redfin-tp1a.999999.999.zip
          3. Note: This removes the -w so your Internal Storage will NOT be wiped.
          4. Add these lines after: PATH=%PATH%;"%SYSTEMROOT%\System32":
            fastboot --set-active=other
            fastboot reboot-bootloader
            ping -n 5 127.0.0.1 >nul
            but before:
            [/ICODE]fastboot flash bootloader bootloader-bramble-a9-9.9-9999999.img[/ICODE]
        • After, you have edited the flash-all.bat file. Copy/Move these files to the [U[Platform-tools[/U] folder:
          1. bootloader-bramble-....img
          2. flash-all.bat
          3. image-bramble-....zip
          4. radio-bramble-....img
        • On your phone: Boot the bootloader (Power off the phone => Press the Power and Down buttons until you see Start)
        • Connect your phone to the computer.
        • Open a Command Prompt on your computer in the Platform-tools folder and type: flash-all at the Command Prompt and press enter.
        • The phone will reboot when flashing is complete.
        • Go-to Part II - INSTRUCTIONS => 5. Root/Reroot with Magisk and Pass SafetyNet, • Patching the boot.img - to root/reroot.
      • Flash Factory Image Wipe Data

        • This will wipe your phone's Internal Storage.
        • Open the folder you extracted the Factory Image to and Copy/Move these files to the Platform-tools folder:
          1. bootloader-bramble-....img
          2. flash-all.bat
          3. image-bramble-....zip
          4. radio-bramble-....img
        • On your phone: Boot the bootloader (Power off the phone => Press the Power and Down buttons until you see Start)
        • Connect your phone to the computer.
        • Open a Command Prompt on your computer in the Platform-tools folder and type: flash-all at the Command Prompt and press enter.
        • The phone will reboot when flashing is complete.
        • Setup phone
        • Enable Developer Mode and USB Debugging
          1. Setup => About phone => Tap Build number 7 times or untill you see you are a 'Developer'.
          2. Setup => System => Developer options => Enable Developer options => enable USB Debugging
        • Go-to Part II - INSTRUCTIONS => 5. Root/Reroot with Magisk and Pass SafetyNet, • Patching the boot.img - to root/reroot.
    3. Take the OTA Update and Maintain Root

      • This set of instructions was written by @topjohnwu: Install Magisk to Inactive Slot , use the latest Magisk Canary, Beta or Stable.
      • NOTE: After you Open Magisk and Restore Images. If you had a Custom Kernel installed, Please check the OP of the Custom Kernel thread you install for the instruction to remove the Custom Kernel and return your phone to Stock. Additionally, if you had Mods installed, Please check the OP of the Mod thread you installed for instruction to remove the Mod and return your phone to Stock before you download the OTA.
      • If you phone bootloops
        • Press the Power button until the phone turns off.
        • Press the Power and Volume Down to boot the bootloader.
        • Open a Command Prompt in the SDK-Platform-tools folder or the folder that has adb.exe in it, and type adb wait-for-device shell magisk --remove-modules
        • fastboot Rebootp
    4. Extract Files from Factory Image/Flash boot.img

      • Extract Files from Factory Image

        1. Extract flash-all.bat and boot.img file
        2. Download the latest Factory image to your phone.
        3. Extract the Factory Image file (bramble-r2d1a.999999.999-factory-99a9a99a.zip) to a folder. The, stock, flash-all.bat file should be in this folder.
        4. Open the folder you extracted the Factory image to and, extract the Image file (image-bramble-aa9a.999999.999.zip) into the folder. The, stock, boot.img file should be in this folder.
      • Flash boot.img

        1. Flashing the boot.img removes root.
        2. Open the folder you extracted the 'image...zip' file to and copy the boot.img file to your computer's platform-tools folder or to the folder that has fastboot.exe in it.
        3. Boot fastboot mode
        4. Connect the phone to the Computer
        5. Open a Command Prompt and type the following command at the prompt:
          fastboot flash boot --slot all boot.img
        6. Reboot
    5. Root/Reroot with Magisk and Pass SafetyNet.

      • Android 13

        • Upgrade to Android 13: OP, Part II - INSTRUCTIONS, 2. Install/Update Factory Image keep data or wipe data, Keep data
      • Patching the boot.img - to root/reroot.

        1. Go to Part II - INSTRUCTIONS => 4. Extract Files from the FactoryImage/Flash boot.img and extract the boot.img file.
        2. Install Magisk Canary - Download app-release.apk
          or
          Magisk Beta 25.0/Stable 24.3 App
        3. Open Magisk Beta/Canary/Stable App
        4. The Update Channel should be set to Beta/Canary/Stable, depending on the version you Installed.
        5. Tap Install (next to Magisk)
        6. Tap, Select and Patch a File
        7. Select the boot.img file you extracted from the latest factory image.
        8. Tap the ✓ (Check Mark)
        9. Tap Let's Go
        10. When you see done, the boot.img has been patched (magisk_patched_xxxxxx.img), and stored in the download folder.
        11. Reboot
        12. Copy/Move the patched boot.img file to your computer's Platform-tools folder or the folder that has fastboot.exe in it:
          • Copy it to a USB drive and transfer it to your computer.
          • Move it to your computer using adb push
        13. Boot fastboot mode
        14. Connect the phone to the Computer with USB cord.
        15. Open a Command Prompt in the folder you copied the patched boot.img to.
        16. Type fastboot flash boot "name of patched boot".img without the quote marks at the Prompt and press enter.
        17. Type fastboot reboot at the Prompt and press enter.
        18. Important: If your phone boot loops try one of the following options:
          • Flash the 'stock' boot.img to both slots: fastboot flash boot boot.img --slot all
          • Remove Modules
            1. Press the Power button until the phone turns off.
            2. Press the Power and Volume Down to boot the bootloader.
            3. Open a Command Prompt in the SDK-Platform-tools folder or the folder that has adb.exe in it, and type adb wait-for-device shell magisk --remove-modules
            4. fastboot Reboot.
      • Pass Safety Net with SafetyNet Fix

        1. Download File(s)
        2. Install Displax/safetynet-fix-v2.3.1-MOD_2.0.zip
          • Open Magisk
          • Tap Modules icon
          • Tap Install from storage
          • Navigate to the Displax/safetynet-fix-v2.3.1-MOD_2.0.zip file you downloaded
          • Tap the Displax/safetynet-fix-v2.3.1-MOD_2.0.zip file
          • Tap the check mark (✓ at the bottom) to start the installation.
          • Note: You do not have to disable/remove SafetyNet Fix.
          • After it installs tap the Save icon to save the log
          • Tap Reboot.
        3. Settings for Magisk Canary
          • Open Magisk App
          • Tap the Setup icon.
          • Scroll down to App and set the Update Channel to Canary.
          • Scroll down to Check Updates and enable it.
          • Scroll down to Magisk and enable Zygisk.
          • Do not enable Denylist
          • Tap Configure DenyList => Tap 3 Dot Menu => Check ✓ Show system apps => Check ✓ Google Play Store, Google Pay, Google Wallet etc.
          • Scroll down to Superuser and enable Enable Biometric Authentication.
        4. Get Device Certified Clear Google Play Services, Google Play Store, Google Pay, Google Wallet, etc. data[/B]
          • Turn Airplane mode on
          • Open Settings
          • Tap Apps & notifications
          • Tap see all...
          • Tap three dot menu
          • Tap Show system
          • Scroll down to Google Play Store
          • Tap Storage and Cache
          • Tap Clear storage
            Note: Repeat the 3 steps above for Google Play Services, Google Pay, Google Wallet, etc.
          • reboot
          • Turn Airplane mode off
        5. Check Device Certification, I may take 24 hours for Device Certification
          • Open Google Play Store app
          • Tap Menu - Circle top right
          • Tap Settings
          • Tap About
          • Check Play protect certification.
    6. Set Magisk App Update Channel/Update Magisk

      • Set Magisk App Update Channel

        • Open Magisk App > Tap Settings icon > Update Channel > Select Stable, Beta, Canary or Custom.
      • Update Magisk

        1. When Magisk App notifies you of an update:
        2. Tap install.
        3. Select, Direct Install (Recommended)
        4. When it finishes installing
        5. Tap, Save Log
        6. Log location: /storage/emulated/0/Download
        7. Tap, Reboot
        8. Done!
    7. Install/Update Magisk Modules

      • Download Modules
      • Install Modules from Storage

        1. Open Magisk
        2. Tap the Modules icon
        3. Tap Install from storage
        4. Navigate to the folder with the Module you want to install.
        5. Tap the Module to highlite it and tap Select.
        6. After it installs, tap the Disc Icon to save the install log.
        7. Tap Reboot
      • Install Modules from Fox2Code/Fox Magisk Module Manager

        1. Open Fox2Code/Fox Magisk Module Manager
        2. Tap the Modules icon
        3. Locate the Module you want to install
        4. Tap Install
        5. After it installs, tap the Disc Icon to save the install log.
        6. Tap Reboot
      • Update Modules

        1. Open Fox2Code/Fox Magisk Module Manager
        2. You, will see the Modules that have Updates.
        3. Tap the Module you want to update.
        4. Tap install.
        5. After it installs, tap the Disc Icon to save the install log.
        6. Tap Reboot
    8. Open a Command Prompt/Boot Fastboot Mode/Boot Recovery

      • Open a Command Prompt on Computer
        1. Open File Explorer, click the platform-tools folder ==> click the folder icon (left side of address bar) to highlight it type cmd and press enter.
        2. Open a Powershell Command Prompt on Computer: Open File Explorer, click the platform-tools folder ==> click the folder icon (left side of address bar) to highlight it type powershell and press enter.
        3. Notes:
          • Enable USB Debugging, on your phone: Settings ==> System ==> Advanced ==> Developer options ==> Scroll down to USB debugging and enable it.
          • When using the Powershell Command Prompt Commands must be preceeded with ./: i.e, ./fastboot devices
          • If you do not want to open a Command Prompt every time you want to use the fastboot command, add the path to the Platform-tools folder to Windows environment variables.
      • Boot fastboot mode (bootloader):
        • Power off phone, press and hold the power and volume down buttons until you see Start.
      • Boot Recovery
        • Power off phone, press and hold the power and volume down buttons until you see Start. Use volume up/down button until you see Recovery mode. Press power button.
    9. Test fastboot

      • Enable Developer Options - Tap Settings > About phone > Build number 7 times or until you should see 'you are a Developer'.
      • Enable USB Debugging - Tap Settings > System > Advanced > Developer options >
        Enable USB Debugging.
      • Open a Command Prompt on your computer in the Platform-tools folder.
      • Boot fastboot mode on your phone
      • Connect the phone to the Computer.
      • At the prompt type: fastboot devices to verify communication with phone. It should return your phone's serial number.
    10. ADB Sideload

    ~ ~ ~ Part III - Other ~ ~ ~
    1. Custom ROMs

      • Need help with a Custom ROM?
        1. If you are you are trying to install or have installed a Custom ROM, read and follow the Installation Instructions in the OP of the Custom ROM thread.
        2. Search the thread of the Custom ROM you are trying to install or have installed for answer(s)/solution(s) to your question(s)/problem(s): If you don't find a answer(s)/solution(s) to your question(s)/problem(s). Post your question(s)/request(s) for help in the Custom ROM thread you are trying to install or have installed.
        3. If you are trying to install a Addon(s) {Custom Kernel, Magisk, etc.} to the Custom ROM you installed: Search the thread of the Custom ROM you installed or the thread of the Addon you want to add to your Custom ROMfor answer(s)/solution(s) to your question(s)/problem(s). If you don't find an answer(s)/solution(s) to your question(s)/problem(s). Post your question(s)/request(s) for help in the Custom ROM or Addon (Custom Kernel, Magisk, etc.) thread.
      • ROMs
    2. Mods
    3. T.W.R.P. Backup/Restore

      • Waiting for Android 13 T.W.R.P.
    3
    Provided you are not on Verizon:
    Try reinstalling the stock boot.img from the update, flash the OTA, or perform another clean install. After first boot and performing any necessary setup (if clean install), power off phone, remove sim card, reboot. Creat a new patched boot.img, install it and reboot. Turn phone off, reinstall sim card, reboot as normal. Should fix the issue. Make sure you are using the latest magisk (I prefer stable of canary personally but it's your call).
    If you are on verizon, do not install the April update in this thread, as it is stated "All carriers EXCEPT Verizon."

    However, there is an OTA update on the official frimware website that does work on Verizon. I just flashed it myself. Maybe Homeboy76 could update thread?
    :( Do not repeat do not follow these instructions. The information is only partially correct. :(

    I just checked the Factory image and the OTA image pages the only change was the All carriers EXCEPT Verizon has been removed from the images description.

    The OP has been updated to reflect the change.

    These images work on Verizon Pixel 4a 5g phones.
    3
    Thanks for the write-up. Just got one of these as I dropped my old phone, and I was due anyways. So question regarding Safetynet. I went ahead and went with the latest Feb factory image, patched the boot and rooted with Magisk, then tried the safety net and attestation fails. Anybody have the feb patch and passing safetynet? if so what was the sequence you used? thanks
    - Root with Magisk patched img
    - Open Magisk Manager install SafetyNet module
    - Reboot
    - Open Magisk Manager Enable Magisk hide
    - Hide Google Play store, Google pay, etc
    - Clear cache and storage for the above apps
    - Reboot
    3
    hi @Homeboy76 ,
    maybe i'm wrong, but in your
    Prerequisites

    1. A Pixel 4a 5(G) phone with an unlocked bootloader.
    2. The latest Android 11 (R) Factory or OTA Image: "bramble" for Pixel 4a 5(G)
    3. Factory Image
    also at:
    4. Install/Update Factory Image keep or wipe data
    Just checked
    It is pointing to the Pixel 4a 5(G) bramble factory image.

    Download the latest Factory Image: Pixel 5 - bramble to your Computer. --> pixel 5 (only text)? Fixed!
    2
    Thanks for the write-up. Just got one of these as I dropped my old phone, and I was due anyways. So question regarding Safetynet. I went ahead and went with the latest Feb factory image, patched the boot and rooted with Magisk, then tried the safety net and attestation fails. Anybody have the feb patch and passing safetynet? if so what was the sequence you used? thanks

    You need Universal Safetynet fix v 1.1.1 Magisk module.