[Guide] Root Pixel 5 with Magisk + Unlock Bootloader + Pass SafetyNet + More

Search This thread

HippoMan

Senior Member
May 5, 2009
2,016
818
Hippoland
Very welcome, my friend.

Yes standard crDroid v7 found in Pixel 5 ROM section.

I agree, this is a wonderful ROM and definitely worth running. Most Magisk modules are updated to run on Magisk v23 and above, so you shouldn't run into much of any compatibility issues.

I didn't update Magisk from v23 until I updated to A13, then I started running the latest Magisk versions.

Also here is the custom update channel to stop new updates in Magisk.
Thank you again!

My Pixel 5 should arrive tomorrow, and I will get started with the crDroid-v7/Magisk-23.0 installation as soon thereafter as I can.

I'll report back here with my progress, and with any issues that I might encounter (hopefully none!).
 

HippoMan

Senior Member
May 5, 2009
2,016
818
Hippoland
Thank you again!

My Pixel 5 should arrive tomorrow, and I will get started with the crDroid-v7/Magisk-23.0 installation as soon thereafter as I can.

I'll report back here with my progress, and with any issues that I might encounter (hopefully none!).
While I'm waiting for delivery of the Pixel 5, I have a couple questions:

Is there a version of TWRP that works with crDroid-7 on the Pixel 5? If so, which version, and should I install TWRP before or after installing crDroid-7?

Also, I already have Magisk-23.0.apk and Magisk-23.0.zip. Are there instructions for how to install Magisk.23.0 under crDroid-7 on the Pixel 5? On my TWRP-based OnePlus device, I just sideload Magisk-23.0.zip via TWRP and reboot, and I then do a normal install of Magisk-23.0.apk. However, I'm wondering if there is a different procedure for installing Magisk-23.0 on the crDroid-7-based Pixel 5.

If these questions are considered off-topic here, feel free to move this to private messages if you prefer.

Thank you!
 
Last edited:

andybones

Forum Moderator
Staff member
May 18, 2010
15,071
15,437
Google Pixel 5
While I'm waiting for delivery of the Pixel 5, I have a couple questions:

Is there a version of TWRP that works with crDroid-7 on the Pixel 5? If so, which version, and should I install TWRP before or after installing crDroid-7?

Also, I already have Magisk-23.0.apk and Magisk-23.0.zip. Are there instructions for how to install Magisk.23.0 under crDroid-7 on the Pixel 5? On my TWRP-based OnePlus device, I just sideload Magisk-23.0.zip via TWRP and reboot, and I then do a normal install of Magisk-23.0.apk. However, I'm wondering if there is a different procedure for installing Magisk-23.0 on the crDroid-7-based Pixel 5.

If these questions are considered off-topic here, feel free to move this to private messages if you prefer.

Thank you!
TWRP is officially supported for Android 11, you can find the latest version: https://dl.twrp.me/redfin/

I usually would just flash Magisk in TWRP, and you can flash the .zip or the .apk right in TWRP.

We are approaching off-topic though, so anymore questions would be best asked in a new thread in the Q&A section.
 

HippoMan

Senior Member
May 5, 2009
2,016
818
Hippoland
TWRP is officially supported for Android 11, you can find the latest version: https://dl.twrp.me/redfin/

I usually would just flash Magisk in TWRP, and you can flash the .zip or the .apk right in TWRP.

We are approaching off-topic though, so anymore questions would be best asked in a new thread in the Q&A section.

Thank you!

I've done this now, but there is a problem with the Magisk-23.0 installation. I have created the following thread in the Q/A section to describe this problem:
https://forum.xda-developers.com/t/...droid-7-and-magisk-23-0-on-a-pixel-5.4528301/

I would greatly appreciate if anyone would check out this thread and help with the Magisk-23.0 issues. And to be clear, please answer in that other thread, not here.

Thank you again, in advance.
 
Last edited:

verynewtothis

New member
Dec 26, 2022
3
0
Can someone please help a bit? I have a pixel 4a 5g rooted through magisk. I thought i could update it i installed the OTA update and lost access to magisk. What should i do now? Do i need to reroot and flash? Also what did i do wrong when updating? Also i cant get my playstore to let me download netflix. I downloaded the apk but i never works properly? Is it because netflix detects the root or what? Like it doesnt function properly. And the playstore says this app is not supported.
Thank you all
 

badabing2003

Recognized Contributor
Sep 17, 2012
1,563
1,841
Can someone please help a bit? I have a pixel 4a 5g rooted through magisk. I thought i could update it i installed the OTA update and lost access to magisk. What should i do now? Do i need to reroot and flash? Also what did i do wrong when updating? Also i cant get my playstore to let me download netflix. I downloaded the apk but i never works properly? Is it because netflix detects the root or what? Like it doesnt function properly. And the playstore says this app is not supported.
Thank you all
Curious, how did you install the OTA update? did you unroot first? otherwise OTA update would fail.

Regardless, you need to reroot and flash, check OP.
As for Netflix, you need to install SafetyNetFix if you are rooted,, again check OP for instructions, just follow the guide and you should be fine.
Ask questions if you are not certain about something.
 
  • Like
Reactions: Homeboy76

verynewtothis

New member
Dec 26, 2022
3
0
Curious, how did you install the OTA update? did you unroot first? otherwise OTA update would fail.

Regardless, you need to reroot and flash, check OP.
As for Netflix, you need to install SafetyNetFix if you are rooted,, again check OP for instructions, just follow the guide and you should be fine.
Ask questions if you are not certain about something.
Weird :/ my ota update just installed. After installing magisk wouldnt open. Upon installing again it did not work and did not give me the option of hiding root etc. After that i used a root checker it said the device is not rooted. However if it is not rooted should i not be able to view netflix on the playstore? Because it says the device is not compatible. Im running it via an apk but it randomly fails when fast forwarding or such however if i dont fast forward or go back it works perfectly fine.
 

verynewtothis

New member
Dec 26, 2022
3
0

inzaghi89

Senior Member
May 16, 2015
90
18
Check OP
Pass Safety Net with SafetyNet Fix
You have to clear the storage / caches because it remembers what it last detected.
Yesterday I've an issue with Netflix after root. Clearing data and cache doesn't solve an issue. There is only one thing that helped me - I've logged on play.google.com and then installed Netflix via webpage directly on device.
 

badabing2003

Recognized Contributor
Sep 17, 2012
1,563
1,841

inzaghi89

Senior Member
May 16, 2015
90
18

Attachments

  • Screenshot_20230110-174615.png
    Screenshot_20230110-174615.png
    65.5 KB · Views: 12
  • Screenshot_20230110-174730.png
    Screenshot_20230110-174730.png
    173.6 KB · Views: 12
  • Like
Reactions: badabing2003

Top Liked Posts

  • There are no posts matching your filters.
  • 1
    However if it is not rooted should i not be able to view netflix on the playstore?
    Check OP
    Pass Safety Net with SafetyNet Fix
    You have to clear the storage / caches because it remembers what it last detected.
    1
    Update
    lineageOS 20.0 for the Google Pixel 5 (redfin) Nightly
    1
    What do you get when you run this.
    After reinstallation from Google play store i can access via app to Netflix and it works for me without any issue.
    1
    received a pixel 5 the other day. so correct me if I'm wrong, grey out OEM unlocking is in no way bypass able. I'm guessing this is a refurbed Verizon phone that is carrier unlocked some how.
    AFAIK if OEM unlocking is greyed out you cannot unlock the bootloader, and no bypass has been found.
    1
    You're welcome booo.
  • 51
    [Guide] Root Pixel 5 with Magisk + Unlock Bootloader + Pass SafetyNet + More
    Android Security Bulletin—January 2023
    Pixel Update Bulletin—January 2023

    Introduction
    This Guide is for Pixel 5 owners that want to Root their phone, and enjoy the benefits of rooting it. The Guide is divided into three parts: Information, Instructions, and Other.

    ~ ~ ~ Part I - INFORMATION ~ ~ ~
    1. Disclaimer

      • I assume no responsibility for the malfunctioning/bricking of your phone.
      • The order of listed items i.e., Custom Kernels, Custom ROMS, etc. Does not indicate my preference for them. It is your responsibility to do the research before selecting an item.
    2. Prerequisites

    3. Update(s)

      1. Factory/OTA Images - 3 Jan
      2. Magisk Alpha - app-release_555a54ec-alpha.apk 2 Sep
      3. Magisk Beta - 25.2 21Jul
      4. Magisk Canary - app-release_831a398b -25206.apk 26Dec
      5. Magisk Delta - app-release
      6. Magisk Stable - 25.2 21Jul
      7. TWRP - 370_11-0... 04Oct - Waiting for T.R.W.P. for Android 13
      8. SafetyNet - kdrag0n safetynet-fix-v2.4.0.zip 09Jan
        This version only supports Zygisk (Magisk 24 and newer).
      9. SDK Platform-tools - r33.0.3 11Aug
      10. Custom Kernels
    4. NEW

      • The QRP2 Beta Factory/OTA images are up for:

        1. Pixel 4a and 4a (5G)
        2. Pixel 5 and 5a
        3. Pixel 6 and 6 Pro
        4. Pixel 6a
        5. Pixel 7 and 7 Pro

        There are also 64-bit QRP2 Beta Factory images:

        1. Pixel 4a (5G)
        2. Pixel 5
        3. Pixel 6
        4. Pixel 6 Pro
    5. My Other Guides
    6. Credits/Thanks/Recognitions

      • Those I may have, inadvertently, forgotten.
    ~ ~ ~ Part II - INSTRUCTIONS ~ ~ ~
    (The Instructions listed below are not steps, they are individual sets of instructions.)

    1. Unlock Bootloader/Return Phone to Stock/Lock Bootloader

      • Unlock Bootloader

        1. This will erase all user data from the device!
        2. Backup your data
        3. Activate Developer Options: Tap Settings > About Phone > Tap Build Number 7 times or until you see you are a Developer. Tap back > System > Advanced > Developer Options. Enable OEM Unlock and, USB Debugging.
        4. Boot fastboot mode
        5. Connect the phone to the Computer with USB cord.
        6. Open a Command Prompt on your computer and type fastboot flashing unlock and press enter.
        7. You should see a request for confirmation on your phone, use the volume keys to scroll and the power key to select.
        8. Allow the process to complete and then type fastboot reboot at the Command Prompt and press enter.
        9. When your phone reboots disconnect your usb cable.
          Notes: After unlocking your bootloader, you'll see a warning: The bootloader is unlocked and... You will see this warning until, you relock the bootloader.
          Do not relock your bootloader until you have returned the device to Stock.
      • Return Phone to Stock

        1. Backup your data/Internal storage
        2. Use the Android flash tool:
          select Wipe => Force Flash Partitions => Lock Bootloader.
      • Lock Bootloader

        1. If your phone is not 100 percent stock do Return Phone to Stock. If you don't you may brick your phone.
        2. This will erase all user data from the device!
        3. Boot fastboot mode
        4. Open a Command Prompt and type this at the Prompt: fastboot flashing lock
        5. You should see a request for confirmation on your phone, use the volume keys to scroll and the power key to select.
        6. Allow the process to complete, then type this at the Command Prompt: fastboot reboot
        7. Enable Developer Options: Settings > About phone > Tap Build number 7 times or until you see 'you are a developer'.
        8. Tap Back > Developer options and toggle OEM Unlock off.
    2. Install/Update Factory Image keep data, wipe data, or try badabing2003 PixelFlasher

      • Important Note(s):

        1. If the previous factory image was rooted (you used Magisk to patch the boot.img of the previous factory image). Open Magisk manager and disable all Magisk modules.
        2. If you want to Upgrade to Android 13 or update the Factory Image without wiping your phone: Do Flash Factory Image Keep Data (below).
        3. Always verify you have the latest version of SDK Platform-Tools installed on your computer before installing the Factory Image: Pixel 5 - redfin.
        4. If you get an error: while flashing, try one of these options:
          • Change the USB port to a non charging USB port.
          • Change the USB cord.
          • Change Computers.
        5. If your phone boot loops try one of the following options:
          • Flash the 'stock' boot.img to both slots: fastboot flash boot boot.img --slot all
          • Remove Modules

            1. Press the Power button until the phone turns off.
            2. Press the Power and Volume Down to boot the bootloader.
            3. Open a Command Prompt in the SDK-Platform-tools folder or the folder that has adb.exe in it, and type adb wait-for-device shell magisk --remove-modules
              then type
            4. fastboot Reboot
          • If you are uncomfortable manually flashing the factory image. Try PixelFlasher by badabing2003.
            Please post Comments/Discussions/Questions about PixelFlasher on that thread.
        6. Backup your data
        7. Download the latest Factory Image: Pixel 5 - redfin to your Computer.
        8. Go to Part II - INSTRUCTIONS => 4. Extract Files from the FactoryImage/Flash boot.img and extract the flash-all.bat file.
      • Flash Factory Image Keep Data

        • If you are Updating/Upgrading to Android 13. Open the folder you extracted the Factory Image to and edit the flash-all.bat file with a text editor i.e., DroidEdit app (See Bold items below).
          * * * S T A R T - E D I T * * *
          @Echo off

          PATH=%PATH%;"%SYSTEMROOT%\System32"
          echo Change active slot
          fastboot getvar current-slot
          fastboot --set-active=other
          fastboot reboot-bootloader
          ping -n 5 127.0.0.1 >nul
          fastboot getvar current-slot

          fastboot flash bootloader bootloader-redfin-a9-9.9-9999999.img
          fastboot reboot-bootloader
          ping -n 5 127.0.0.1 >nul
          fastboot flash radio radio-redfin-a9999-99999-999999-b-9999999.img
          fastboot reboot-bootloader
          ping -n 5 127.0.0.1 >nul
          fastboot update image-redfin-aa9a.999999.999.zip
          echo Press any key to exit...
          pause >nul
          exit
          * * * * E N D - E D I T * * * *
        • After, you have edited the flash-all.bat file. Copy/Move these files to the Platform-tools folder:
          1. bootloader-redfin-....img
          2. flash-all.bat
          3. image-redfin-....zip
          4. radio-redfin-....img
        • On your phone: Boot the bootloader (Power off the phone => Press the Power and Down buttons until you see Start)
        • Connect your phone to the computer.
        • Open a Command Prompt on your computer in the Platform-tools folder and type: flash-all at the Command Prompt and press enter.
        • The phone will reboot when flashing is completed.
        • Go-to ~ ~ ~ Part II - INSTRUCTIONS ~ ~ ~, 5. Root/Reroot with Magisk and Pass SafetyNet, • Patching the boot.img - to root/reroot.
      • Flash Factory Image Wipe Data

        • This will wipe your phone's Internal Storage.
        • Open the folder you extracted the Factory Image to and Copy/Move these files to the Platform-tools folder:
          1. bootloader-redfin-....img
          2. flash-all.bat
          3. image-redfin-....zip
          4. radio-redfin-....img
        • On your phone: Boot the bootloader (Power off the phone => Press the Power and Down buttons until you see Start)
        • Connect your phone to the computer.
        • Open a Command Prompt on your computer in the Platform-tools folder and type: flash-all at the Command Prompt and press enter.
        • The phone will reboot when flashing is complete.
        • Setup phone
        • Enable Developer Mode and USB Debugging
          1. Setup => About phone => Tap Build number 7 times or untill you see you are a 'Devloper'.
          2. Setup => System => Developer options => Enable Developer options => enable USB Debugging
        • Go-to ~ ~ ~ Part II - INSTRUCTIONS ~ ~ ~, 5. Root/Reroot with Magisk and Pass SafetyNet, • Patching the boot.img - to root/reroot.
    3. Take the OTA Update and Maintain Root

      • This set of instructions was written by @topjohnwu: Install Magisk to Inactive Slot , use Magisk Canary, Beta or Stable.
      • NOTE: After you Open Magisk and Restore Images. If you had a Custom Kernel installed, Please check the OP of the Custom Kernel thread you install for the instruction to remove the Custom Kernel and return your phone to Stock. Additionally, if you installed Mods Please check the OP of the Mod thread you installed for instruction to remove the Mod and return your phone to Stock before you download the OTA.
      • If you phone bootloops
        • Press the Power button until the phone turns off.
        • Press the Power and Volume Down to boot the bootloader.
        • Open a Command Prompt in the SDK-Platform-tools folder or the folder that has adb.exe in it, and type adb wait-for-device shell magisk --remove-modules
        • fastboot Reboot
    4. Extract Files from Factory Image/Flash boot.img

      • Extract Files from Factory Image

        1. Extract flash-all.bat and boot.img file
        2. Download the latest Factory image to your phone.
        3. Extract the Factory Image file (bramble-r2d1a.999999.999-factory-99a9a99a.zip) to a folder. The, stock, flash-all.bat file should be in this folder.
        4. Open the folder you extracted the Factory image to and, extract the Image file (image-bramble-aa9a.999999.999.zip) into the folder. The, stock, boot.img file should be in this folder.
      • Flash boot.img

        1. Flashing the boot.img removes root.
        2. Open the folder you extracted the 'image...zip' file to and copy the boot.img file to your computer's platform-tools folder or to the folder that has fastboot.exe in it.
        3. Boot fastboot mode
        4. Connect the phone to the Computer
        5. Open a Command Prompt and type the following command at the prompt:
          fastboot flash boot --slot all boot.img
        6. Reboot
    5. Root/Reroot with Magisk and Pass SafetyNet.

      • Android 13

        • Upgrade to Android 13: OP, Part II - INSTRUCTIONS, 2. Install/Update Factory Image keep data or wipe data, Keep data
      • Patching the boot.img - to root/reroot.

        1. Go to Part II - INSTRUCTIONS => 4. Extract Files from the FactoryImage/Flash boot.img and extract the boot.img file.
        2. Install Magisk Canary - Download app-release.apk
          or
          Magisk Beta/Stable App
        3. Open Magisk Beta/Canary/Stable App
        4. The Update Channel should be set to Beta/Canary/Stable, depending on the version you Installed.
        5. Tap Install (next to Magisk)
        6. Tap, Select and Patch a File
        7. Select the boot.img file you extracted from the latest factory image.
        8. Tap the ✓ (Check Mark)
        9. Tap Let's Go
        10. When you see done, the boot.img has been patched (magisk_patched_xxxxxx.img), and stored in the download folder.
        11. Reboot
        12. Copy/Move the patched boot.img file to your computer's Platform-tools folder or the folder that has fastboot.exe in it:
          • Copy it to a USB drive and transfer it to your computer.
          • Move it to your computer using adb push
        13. Boot fastboot mode
        14. Connect the phone to the Computer with USB cord.
        15. Open a Command Prompt in the folder you copied the patched boot.img to.
        16. Type fastboot flash boot "name of patched boot".img without the quote marks at the Prompt and press enter.
        17. Type fastboot reboot at the Prompt and press enter.
        18. Important, if your phone boot loops try one of the following options:
          • Flash the 'stock' boot.img to both slots: fastboot flash boot boot.img --slot all
          • Remove Modules
            1. Press the Power button until the phone turns off.
            2. Press the Power and Volume Down to boot the bootloader.
            3. Open a Command Prompt in the SDK-Platform-tools folder or the folder that has adb.exe in it, and type adb wait-for-device shell magisk --remove-modules
            4. fastboot Reboot.
        19. Important, if the Magisk Manager app has the Superuser and Module buttons greyed out:
      • Pass Safety Net with SafetyNet Fix

        1. Download File(s)
        2. Install kdrag0n safetynet-fix-v2.4.0.zip
          • Open Magisk
          • Tap Modules icon
          • Tap Install from storage
          • Navigate to the kdrag0n safetynet-fix-v2.4.0.zip file you downloaded
          • Tap the kdrag0n safetynet-fix-v2.4.0.zip file.
          • Tap the check mark (✓ at the bottom) to start the installation.
          • Note: You do not have to disable/remove SafetyNet Fix.
          • After it installs tap the Save icon to save the log
          • Tap Reboot.
        3. Settings for Magisk Canary
          • Open Magisk App
          • Tap the Setup icon.
          • Scroll down to App and set the Update Channel to Canary.
          • Scroll down to Check Updates and enable it.
          • Scroll down to Magisk and enable Zygisk.
          • Enable Denylist
          • Tap Configure DenyList => Tap 3 Dot Menu => Check ✓ Show system apps => Check ✓ Google Play Store, Google Pay, Google Wallet etc.
          • Scroll down to Superuser and enable Enable Biometric Authentication.
        4. Get Device Certified Clear Google Play Services, Google Play Store, Google Pay, Google Wallet, etc. data[/B]
          • Turn Airplane mode on
          • Open Settings
          • Tap Apps & notifications
          • Tap see all...
          • Tap three dot menu
          • Tap Show system
          • Scroll down to Google Play Store
          • Tap Storage and Cache
          • Tap Clear storage
            Note: Repeat the 3 steps above for Google Play Services, Google Pay, Google Wallet, etc.
          • reboot
          • Turn Airplane mode off
        5. Check Device Certification, It may take 24 hours for Device Certification
          • Open Google Play Store app
          • Tap Menu - Circle top right
          • Tap Settings
          • Tap About
          • Check Play protect certification.
    6. Set Magisk App Update Channel/Update Magisk

      • Set Magisk App Update Channel

        • Open Magisk App > Tap Settings icon > Update Channel > Select Stable, Beta, Canary or Custom.
      • Update Magisk

        1. When Magisk App notifies you of an update:
        2. Tap install.
        3. Select, Direct Install (Recommended)
        4. When it finishes installing
        5. Tap, Save Log
        6. Log location: /storage/emulated/0/Download
        7. Tap, Reboot
        8. Done!
    7. Install/Update Magisk Modules

      • Download Modules
      • Install Modules from Storage

        1. Open Magisk
        2. Tap the Modules icon
        3. Tap Install from storage
        4. Navigate to the folder with the Module you want to install.
        5. Tap the Module to highlite it and tap Select.
        6. After it installs, tap the Disc Icon to save the install log.
        7. Tap Reboot
      • Install Modules from Fox2Code/Fox Magisk Module Manager

        1. Open Fox2Code/Fox Magisk Module Manager
        2. Tap the Modules icon
        3. Locate the Module you want to install
        4. Tap Install
        5. After it installs, tap the Disc Icon to save the install log.
        6. Tap Reboot
      • Update Modules

        1. Open Fox2Code/Fox Magisk Module Manager
        2. You, will see the Modules that have Updates.
        3. Tap the Module you want to update.
        4. Tap install.
        5. After it installs, tap the Disc Icon to save the install log.
        6. Tap Reboot
    8. Open a Command Prompt/Boot Fastboot Mode/Boot Recovery

      • Open a Command Prompt on Computer
        1. Open File Explorer, click the platform-tools folder ==> click the folder icon (left side of address bar) to highlight it type cmd and press enter.
        2. Open a Powershell Command Prompt on Computer: Open File Explorer, click the platform-tools folder ==> click the folder icon (left side of address bar) to highlight it type powershell and press enter.
        3. Notes:
          • Enable USB Debugging, on your phone: Settings ==> System ==> Advanced ==> Developer options ==> Scroll down to USB debugging and enable it.
          • When using the Powershell Command Prompt Commands must be preceeded with ./: i.e, ./fastboot devices
          • If you do not want to open a Command Prompt every time you want to use the fastboot command, add the path to the Platform-tools folder to Windows environment variables.
      • Boot fastboot mode (bootloader):
        • Power off phone, press and hold the power and volume down buttons until you see Start.
      • Boot Recovery
        • Power off phone, press and hold the power and volume down buttons until you see Start. Use volume up/down button until you see Recovery mode. Press power button.
    9. Test fastboot

      • Enable Developer Options - Tap Settings > About phone > Build number 7 times or until you should see 'you are a Developer'.
      • Enable USB Debugging - Tap Settings > System > Advanced > Developer options >
        Enable USB Debugging.
      • Open a Command Prompt on your computer in the Platform-tools folder.
      • Boot fastboot mode on your phone
      • Connect the phone to the Computer.
      • At the prompt type: fastboot devices to verify communication with phone. It should return your phone's serial number.
    10. ADB Sideload

    ~ ~ ~ Part III - OTHER ~ ~ ~
    1. Custom ROMs

      • Need help with a Custom ROM?
        1. If you are you are trying to install or have installed a Custom ROM, read and follow the Installation Instructions in the OP of the Custom ROM thread.
        2. Search the thread of the Custom ROM you are trying to install or have installed for answer(s)/solution(s) to your question(s)/problem(s): If you don't find a answer(s)/solution(s) to your question(s)/problem(s). Post your question(s)/request(s) for help in the Custom ROM thread you are trying to install or have installed.
        3. If you are trying to install a Addon(s) {Custom Kernel, Magisk, etc.} to the Custom ROM you installed: Search the thread of the Custom ROM you installed or the thread of the Addon you want to add to your Custom ROMfor answer(s)/solution(s) to your question(s)/problem(s). If you don't find an answer(s)/solution(s) to your question(s)/problem(s). Post your question(s)/request(s) for help in the Custom ROM or Addon (Custom Kernel, Magisk, etc.) thread.
      • ROMs
        1. Google Pixel 5 ROMs, Kernels, Recoveries, & Other
        2. Other Custom ROMs
    2. Themes, Apps, and Mods
    3. T.W.R.P. Backup/Restore

      • Waiting for Android 13 T.W.R.P.
    6
    :) I hope you all have a Joyful Holiday season with your family and loves ones. :)

    ~ ~ ~ Stay safe ~ ~ ~
    5
    is there a magisk boot img with modules disabled?. i have a boot loop and need a boot img with it disabled.
    You should have your stock image you can push over. I do not think replacing the boot image with another patched image would disable anything. You can also use adb to remove any modules. Regardless heres my patched boot image and the command to remove modules. Power off, connect phone enter this command, hold power button to boot phone.

    adb wait-for-device shell magisk --remove-modules

    Patched December build boot image
    here
    4
    For people who are having bootloops with patched boot.img
    Please pay attention to this step in the guide
    Section 7
    Under Patching boot.img
    4- Depending on the version of Magisk Manager installed: Set the Update Channel to Beta or Canary.

    Even if you install beta / canary magisk apk, if you don't select the matching channel, you'd get a bootloop, so don't forget that important step.
    3
    Thank you for your help I really appreciate it!
    Absolutely, helping each other is what makes this community work.