OVERVIEW:
After a rather lengthy back-and-forth colloquy with Hot Pepper Mobile, we have finally been given access to factory firmware images for this tablet. To Hot Pepper Mobile's credit, most of the delay way due to a language translation issue regarding English to Chinese.
This guide will focus on two primary tasks: (1) unlocking the Scepter 8 bootloader; and (2) rooting the Scepter 8 using the latest stable release of Magisk. For purposes of this guide, we will be using the latest v9 firmware. If you have not yet updated to v9, head on over to my thread on restoring & upgrading the Scepter 8 firmware here Firmware Restoration Guide
DISCLAIMER:
Unlocking your bootloader and rooting your device are both procedures that carry inherent risks. Because these procedures involve modifying the device from it's stock factory configuration, it is possible to corrupt, damage, or even render your tablet completely inoperable. By proceeding further, you are assuming sole responsibility for the integrity and operability of your device, and thus absolve me of any liability in the event something goes south. I have, however, tested these guides and feel confident that things will go smoothly as long as you follow the simple instructions.
PLEASE PLAY NICE & FOLLOW RULES:
This thread was created with the intent of being a noob-friendly forum. This simply means that new and inexperienced members are fully welcome here, and will be provided with extra guidance and assistance if needed. Please keep in mind that XDA is a global community of developers, enthusiasts and device users. As such, and although English is the only permitted language in the forums & threads, not all members speak English as their first language, and often rely on text translation tools when asking questions & posting. As such, it is very common for words to be misconstrued, meanings to be misinterpreted, and the context as a whole lost in translation. I ask members to be patient, compassionate and respectful to others on this thread. Those members with the knowledge to do so are urged and asked to help newer members, and recall back when you were new here and others helped you.
Please help me with keeping this thread on topic by keeping all subject matter herein relevant to the topics of rooting and OEM unlocking the QLink Scepter 8. Any posts about other devices or subject matter run afoul of XDA rules and are subject to removal by moderators -- and potential sanctions imposed upon the offending member. Moreover, an on-topic thread keeps things organized and easier to follow. Thank you for your consideration.
FIRMWARE SPECS:
OS/Version: Android 11 (Go Edition)
Build #: Scepter_8_Tablet_V9_20220221
Kernel Version: Linux v5.4.99
Android Security Patch: 02/05/2022
Build Date: February 21, 2022
API Level: 30
Partition Scheme: Dynamic
PREREQUISITES:
To unlock the bootloader and root the QLink Scepter 8 tablet, you will need a laptop or PC running on Windows 7/8.1/10/11. (A Mac or Linux machine can also be used. For purposes of this guide, however, I am focusing on a Windows setup.) You will also need the OEM-supplied or a quality equivalent micro USB to USB-A data sync cable. Last but not least, you will need to install compatible USB device drivers for ADB & Fastboot on your PC/laptop. I have included the 15-Second ADB Driver Installer below under the DOWNLOADS heading. This Installer will install ADB & Fastboot system-wide, as well as the Google USB device drivers.
•INSTALLING USB DEVICE DRIVERS•
This step is optional and only needs to be followed if you are having issues with your tablet being recognized by Windows while connected in fastboot mode.
Many members have reported issues with device recognition while in fastboot mode. I have also noticed a persistence problem with Windows drivers on this tablet. I can manually update the driver using Windows Device Manager, enabling fastboot recognition; yet, once the tablet is disconnected from my PC the updated driver does not always persist, requiring a manual driver update each time fastboot mode is needed. Follow these steps to enable fastboot recognition of your device.
• 1. If you have not yet done so, install the 15-Second ADB Installer from the link below on your Windows PC or laptop. Open the utility and follow the prompts to install the ADB & Fastboot drivers. Opt to install ADB system-wide. Next you will be prompted to install the Google USB device drivers. Select
Y and install them. You should see an interface informing you that the drivers were successfully installed. NOTE: If you get a warning notification that the drivers are unsigned, select the option to install anyway;
• 2. With your tablet powered off, hold the Power and Volume Down buttons simultaneously until the QLink logo appears, at which time you release the Power button but continue holding Volume Down. When a green Android graphic appears on your display, you are in fastboot mode;
• 3. Connect your tablet to your Windows machine using the OEM-supplied or a quality equivalent micro USB to USB-A data sync cable;
• 4. Open a command window in the path of your ADB/Fastboot directory. Execute this command:
If properly connected, the command window will return an alphanumeric string which is synonymous with your tablet serial number. If this occurs, you are finished with this step and may proceed with this guide. If the command window displays Waiting on Any Device, or if your serial number is not displayed, continue with the following steps;
• 5. Keeping your device connected to your Windows PC/laptop, right click your Windows Start icon and select Device Manager. Locate your tablet in the menu. It will likely be located under either the Portable Devices or Android Device heading;
• 6. Right click your device and select
Update Driver. Next, select Browse My Computer for Drivers. On the next screen choose the option for Let Me Pick From a List... Now you will see a list of drivers to select from. Depending on the manner in which Windows recognized your tablet in the Device Manager menu, the driver selection menu can vary. If you see an option for Android Device, select that option and then select Android Composite ADB Interface. Or, you may be directly presented with options for Android Bootloader Interface, Android ADB Interface and Android Composite ADB Interface. In any event, choose Android Composite ADB Interface and then click
Next. Click Yes in the Update Driver Warning dialogue screen, at which time the drivers will be installed.
• 7. Return to your command window and again execute the fastboot devices command. If your serial number is displayed, your drivers are now properly installed. If you are still experiencing fastboot recognition issues, try using another data sync cable, change USB ports on your computer, and/or reinstall the drivers using the 15-Second ADB Installer.
I. UNLOCKING THE BOOTLOADER:
If you plan on rooting your tablet, this step is mandatory. If your bootloader is already unlocked and you wish to root your device, skip down to the rooting instructions below.
WARNING: Unlocking your bootloader forces the device into a factory data reset, which will effectively wipe all saved user data from the device. Make a backup at this point if there are files and media on your tablet that you wish to keep.
INSTRUCTIONS:
1. Enable Developer Options on your tablet by going to device Settings>About tablet and tap Build number approximately seven times. Android will notify you that Developer Options are enabled; this menu will appear under device Settings>System>Advanced.
2. Enable USB Debugging and OEM Unlocking in the Developer Options menu. NOTE: Users have reported the OEM Unlocking option being greyed-out unless you are signed in to your Google account.
3. Now to boot into fastboot mode, and this particular step is extremely important. Android 10 introduced a new fastboot mode for dynamic partitions, known as
FASTBOOTD, which is relocated from the bootloader to userspace. This particular fastboot mode supports resizeable partitions within the dynamic scheme, and enables the user to create, resize and delete various logical partitions. However, FASTBOOTD mode cannot be utilized to unlock the bootloader, and will not recognize the oem unlock command. As such, the user must rely upon legacy fastboot mode in order to unlock the bootloader. From stock recovery mode, you may simply choose the option to reboot to bootloader. DO NOT CHOOSE THE OPTION TO ENTER FASTBOOT, as this option will boot to FASTBOOTD. From the Android OS, you can boot into legacy fastboot mode by executing:
Once you see a green Android graphic appear in the center your display, you are in the correct fastboot mode.
4. Connect your tablet to your PC/laptop using the OEM-supplied or a quality equivalent micro USB to USB-A data sync cable. Next, open a command window in the path of your ADB/Fastboot directory. Check your connection by executing this command:
If you are properly connected, the command window will return an alphanumeric string synonymous with your device's serial number. If you do not see this, there is a problem with communications between your tablet and PC/laptop. To troubleshoot the issue, switch to another USB port, try another data sync cable, and/or reinstall the ADB/Fastboot drivers on your PC or laptop. Also, see my instructions above on installing USB device drivers on your Windows computer;
5. Once a proper connection has been verified, execute this command:
Once you see the
Okay notification in the command window, your bootloader is now unlocked. Execute this command:
Your tablet will now initiate a factory data reset and then reboot into the initial setup for the Android OS.
II. ROOTING THE QLINK SCEPTER 8
Once the bootloader has been unlocked, rooting this tablet is very straightforward. To simplify this guide, I am providing a pre-rooted boot image file in the DOWNLOADS section below. This boot image has been patched with the latest stable Magisk systemless root script.
INSTRUCTIONS:
1. Download the Magisk patched boot image using the link below and save the file on your PC/laptop in the ADB/Fastboot directory. Note that the file is named patched_boot.img. The flashing command below assumes that you leave this file name unchanged;
2. Go to device Settings>About tablet and tap Build number 7 times or until Developer Options are enabled. (This step is necessary if you unlocked your bootloader using the previous section, due to the factory data reset.) Enable USB Debugging in the Developer Options menu;
3. Power your tablet off. Hold the Power and Volume Down keys simultaneously until the QLink logo appears, at which time you release Power but continue holding Volume Down. The green Android will appear on the display to indicate fastboot mode;
4. Connect your tablet to your PC or laptop using a quality data sync cable. Verify your connection using the instructions in Step 4 of the bootloader unlocking section above;;
5. Once a solid connection is verified, execute these commands:
