[Guide] Root twrp umi Plus

[Jazz-BiH]

Guys, any idea this will work on a Noa H8 (a clone of the Umi Plus)? gsmchoice.com/en/catalogue/noa/h8

 

[Bubach28]

Guys, any idea this will work on a Noa H8 (a clone of the Umi Plus)? gsmchoice.com/en/catalogue/noa/h8

It will work. Just use scatter file and recovery.img

 

[Benschl]

Did everything but can't boot into twrp recovery mode.. :/ now i guess the battery is damaged from many times restarting the phone when i tried to boot into twrp recovery..

 

[Simply13]

******************Rooting Guide For umi plus***************
Guys This IS for you, just Follow Below Guide to Install twrp recovery And Root your umi Plus,

Instructions-
twrp Installation-

• Download sp tools, twrp, supersu, vcom Driver from Below
• install correct vcom Driver on PC
• Run Sp Flash Tools, Load MT67XX Scatter from recovery Folder
• Uncheck Everything and then Check Recovery only
• under Recovery Section Load Downloaded twrp.img
• then click on Download
• as soon as connect your Switched of phone to your pc via usb and wait for success, after complete, follow Below Instructions To Root,

Rooting Instructions-
1) first, Download the SuperSu zip file from Below.
2) Now save the SuperSu zip file to your phone.
3) Boot your device into Recovery mode (TWRP) by pressing ‘Volume UP + Power‘ button.
4) In TWRP Recovery navigate to Install Zip and select ‘SuperSu.zip’ to Root Your Device
5) Swipe to install SuperSu and reboot your device.

Downloads-
mod edit - links removed
SP TOOLS, twrp, vcom Driver, and supersu[/URL]

Screen Shorts-

Wen its say ok when its flash and im trying to go in recovery mode there is no twrp. Help

 

[Tadomeku]

Hey,

I'm a bit stuck here, would appreciate some assistance.

I tried to root my device by yesterday using 'SP Flash tool' by flashing TWRP and then installing SuperSU. That went fine, but after booting my Google Play Services kept rebooting rendering the device unusable. In an attempt to fix this I tried a "Factory Reset" via the Android settings menu which I guess was a bad idea because it started auto booting into Recovery... At that no matter what I did I ended up back in Recovery.. Reboot to system, factory data reset.. all rebooted the phone back into recovery.

So I thought I would just try putting the default recovery back on the device again but whenever I power off the device and connect it to my PC it boots into recovery.. The phone needs to be powered off for SP Flash Tools to work.

Tried loading recovery image via fastboot but the volume rockers don't work in fastboot so I can't confirm the action.

I read online that holding down VolUp + Power can 'force' into preload mode. So I did that with my SP flash tool ready and it seems to have erased recovery mode. Now whenever I try to get into recovery it just says "No command". No combination of button pressing, button holding, button releasing or anything will change this. Neither fastboot or adb can see the device either. It shows up as "MTP USB device" in device manager in Windows...

Is it doomed? I can't figure out what to do next...