Guide soft brick unbrick rom for LG G3

[vandieutot]

Up Rom Unbrick LG Soft Brick G3 ​

* Thank @wolfgart files.
* This method is for the original rom you run up test by which failed not stop at 2% or 49% or a low battery detector okay.
* I have done successfully on the LG G3 plant F400L/S/K so I wrote this article to share with you to protect your children's G3.
* Download drawing tools.
FlashTool v1.8.1

* File. Tottenham
F400K V10B
Files. DLL F400K

F400L V10A
Files. DLL F400L

F400S V10B
Files. DLL F400S

Latest drivers for LG

- Down to copy the folder containing the file. Tottenham that you have downloaded the firmware for each and renamed with the name of the file EXACTLY. Tot that you down in the

Now proceed:
1 / Put the download mode mode

2 / Set FlashTool v1.8.1. Let it run the default setup install to C: \ LG \ LGFlashtool

3 / LGflashtool Crack Down on It is Megalock.dll file, copy it to the root of the LG Flash Tool folder in C: \ LG \ LgFlashtool

4 / Put G3 in download mode. Plugged into the computer. Open Device Manager to make the picture below.

5 / Note the COM port, the COM port you can be different, so follow the image below to convert from any COM port to COM 41.

6 / LG Flash Tool Open earlier you set it up it will be one table, select all the items exactly as shown below (the machine running Win 7 + 8 select Open as Admin offline).

press OK

7 / After you click OK, it will show you the following table and the yellow button.

8 / After the yellow button it will run as follows.

Games you wait 2-3 minutes for it to run

9 / After running it will appear as shown below:

10 / then you disconnect the USB cable connected to your computer with G3, wait 5 seconds, then plug the cable, wait 5 seconds longer range it will run as follows:

Wait for it to run, remember to mind on tel will run until rebooot back, you still plug the cable, no cable pulled offline!
When you reboot the machine on FlashTool G3 will appear as follows:

Wait G3 boot into Android dc disconnect the cable, the setup screen: D enjoy the fruits!

 

[wolfgart]

Up Rom Unbrick LG Soft Brick G3 ​

* This method is for the original rom you run up test by which failed not stop at 2% or 49% or a low battery detector okay.
* I have done successfully on the LG G3 plant F400L/S/K so I wrote this article to share with you to protect your children's G3.
* Download drawing tools.
FlashTool v1.8.1

* File. Tottenham
F400K V10B
F400L V10B
F400S V10B
Files. DLL F400S/L/K
Latest drivers for LG

- Down to copy the folder containing the file. Tottenham that you have downloaded the firmware for each and renamed with the name of the file EXACTLY. Tot that you down in the

Now proceed:
1 / Put the download mode mode

2 / Set FlashTool v1.8.1. Let it run the default setup install to C: \ LG \ LGFlashtool

3 / LGflashtool Crack Down on It is Megalock.dll file, copy it to the root of the LG Flash Tool folder in C: \ LG \ LgFlashtool

4 / Put G3 in download mode. Plugged into the computer. Open Device Manager to make the picture below.

5 / Note the COM port, the COM port you can be different, so follow the image below to convert from any COM port to COM 41.

6 / LG Flash Tool Open earlier you set it up it will be one table, select all the items exactly as shown below (the machine running Win 7 + 8 select Open as Admin offline).

press OK

7 / After you click OK, it will show you the following table and the yellow button.

8 / After the yellow button it will run as follows.

Games you wait 2-3 minutes for it to run

9 / After running it will appear as shown below:

10 / then you disconnect the USB cable connected to your computer with G3, wait 5 seconds, then plug the cable, wait 5 seconds longer range it will run as follows:

Wait for it to run, remember to mind on tel will run until rebooot back, you still plug the cable, no cable pulled offline!
When you reboot the machine on FlashTool G3 will appear as follows:

Wait G3 boot into Android dc disconnect the cable, the setup screen: D enjoy the fruits!

MOD EDIT: Please don't quote the entire OP

tot and dll files are mine, i've uploaded for first on the WEB and you have used them . This is the section : http://forum.xda-developers.com/showthread.php?t=2771401


You should at least "Thank you" before using files

 

[KR LUCKY GOLDSTAR]

PERFECT.

BUT I need F400S TOT file...

Is there somebody who upload F400S tot file for me?

 

[vandieutot]

tot and dll files are mine, i've uploaded for first on the WEB and you have used them . This is the section : http://forum.xda-developers.com/showthread.php?t=2771401


You should at least "Thank you" before using files

I thank you. Sorry you because of this careless okay.

 

[vandieutot]

Thank wolfgart files. Please ask when they have F400S and F400L, sir.

 

[benkxda]

Hi @vandieutot. I think a guide, how to and tools are better placed in the General section. I usually never search within Q&A.

However, your thread is in the LG G3 index

 

[vandieutot]

Hi @vandieutot. I think a guide, how to and tools are better placed in the General section. I usually never search within Q&A.

However, your thread is in the LG G3 index

I thank you for your interest in the topic I created. But I do not understand your disposal. You can not say more.

 

[benkxda]

I thank you for your interest in the topic I created. But I do not understand your disposal. You can not say more.

To move the thread, just click on the exclamation mark triangle sign at the top right of your first post.Then place a statement like "started thread in wrong forum, please move into the LG G3 General forum" and choose, "Thread/post moving or maintenance" from the drop down menu and a moderator will take care of your request.

 

[lovers74]

mtp driver problem

my phone is stuck in bootloop after I tried to flash a ROM, so I tried to use the TOT method but I having a problem the MTP driver installation failure, I tried all kind of drivers but still wont install, what should I do now?

 

[OZJeff]

Help!

I have a F400K model, I was able to root and flash the 2 custom roms (Sphinx /VTD) fine, but when I tried to flash back to factory stock, my phone now shows it's a F400L model for some reason. So trying to flash the F400K tot file doesn't work (It works with F400L though). Is there anyway to get back to the original F400K model?

---------- Post added at 10:01 AM ---------- Previous post was at 09:57 AM ----------

my phone is stuck in bootloop after I tried to flash a ROM, so I tried to use the TOT method but I having a problem the MTP driver installation failure, I tried all kind of drivers but still wont install, what should I do now?

From your first screenshot, I think you have the same issue as me, the phone is recognized since it wont get to that error if your driver is not working. I was able to flash F400L tot file on my phone even though I have an F400K model. Just posted and hopefully someone can help and provide details on what I need to do in order to flash the original F400K factory firmware on my phone.

 

[lovers74]

I have a F400K model, I was able to root and flash the 2 custom roms (Sphinx /VTD) fine, but when I tried to flash back to factory stock, my phone now shows it's a F400L model for some reason. So trying to flash the F400K tot file doesn't work (It works with F400L though). Is there anyway to get back to the original F400K model?

---------- Post added at 10:01 AM ---------- Previous post was at 09:57 AM ----------



From your first screenshot, I think you have the same issue as me, the phone is recognized since it wont get to that error if your driver is not working. I was able to flash F400L tot file on my phone even though I have an F400K model. Just posted and hopefully someone can help and provide details on what I need to do in order to flash the original F400K factory firmware on my phone.

Yes same thing happened to me, it turns out that its not a driver issue my phone accepted the F400L TOT file although my device is F400K it is strange.

 

[Pilz]

my phone is stuck at factory reset status 2. Everything went fine until the last part and it failed...
EDIT: I installed the latest flash-tool and re downloaded the dll and tot files and its still failing at the very end....

EDIT 2:

I have tried again, and still nothing. It will sometimes get to 99% and then fail, and other times it won't make it past 11-12%. I re installed the latest drivers, flash tool, and re-downloaded the dll and tot files. Does anyone know how to unbrick it? The most it will do is get to factory reset status 2, but then if I run it again after it fails it won't find my phone, and it only boots into download mode. It's a never ending loop of that or factory reset status 2 no matter what I try. I would really appreciate any help. I have a F400S and I downloaded all of the correct files from the other posts. My phone crashed after flashing a ROM and now well, here I am.

 

[Showtek1980]

my phone is stuck at factory reset status 2. Everything went fine until the last part and it failed...
EDIT: I installed the latest flash-tool and re downloaded the dll and tot files and its still failing at the very end....

EDIT 2:

I have tried again, and still nothing. It will sometimes get to 99% and then fail, and other times it won't make it past 11-12%. I re installed the latest drivers, flash tool, and re-downloaded the dll and tot files. Does anyone know how to unbrick it? The most it will do is get to factory reset status 2, but then if I run it again after it fails it won't find my phone, and it only boots into download mode. It's a never ending loop of that or factory reset status 2 no matter what I try. I would really appreciate any help. I have a F400S and I downloaded all of the correct files from the other posts. My phone crashed after flashing a ROM and now well, here I am.

Hey guys! PLEASE help! I also am stuck on the blue screen " Factory Reset Status 3.. Any advice or suggestions, please?

---------- Post added at 04:18 PM ---------- Previous post was at 03:56 PM ----------

I decided to stop waiting for an automatic reboot and removed the battery. Waited for about 10 seconds, popped in the battery .. rebooted and I have stock unrooted! Thank you so much !!!

 

[Pilz]

Hey guys! PLEASE help! I also am stuck on the blue screen " Factory Reset Status 3.. Any advice or suggestions, please?

---------- Post added at 04:18 PM ---------- Previous post was at 03:56 PM ----------

I decided to stop waiting for an automatic reboot and removed the battery. Waited for about 10 seconds, popped in the battery .. rebooted and I have stock unrooted! Thank you so much !!!

After factory reset stays 3 don't unplug the cable and it should reboot and startup that's the ending step.

Sent from my SAMSUNG-SM-N900A using XDA Premium 4 mobile app

 

[Showtek1980]

After factory reset stays 3 don't unplug the cable and it should reboot and startup that's the ending step.

Sent from my SAMSUNG-SM-N900A using XDA Premium 4 mobile app

Hi there! Thanks for you reply I waited long enough for a reboot and I decided to unplug the cable, remove the battery and thank my lucky stars it rebooted up well... I managed to update to the latest version .. Version F400k10g.. (Since I'm in Korea). I read somewhere on the LG G3 forum that you can only unplug after " Factory reset status 3 ".. But I read that after I took the "risk"

 

[thermopoli]

No luck

No luck...

D855 (I think)
Flash tool gives me this every time

This was also not helpfull :/
http://forum.xda-developers.com/showthread.php?p=53796705

Any ideas?

 

[Showtek1980]

No luck...

D855 (I think)
Flash tool gives me this every time

This was also not helpfull :/
http://forum.xda-developers.com/showthread.php?p=53796705

Any ideas?

Hi there! Do you have the correct .dll and stock version for your phone? Try using a newer version of the flash tool.. I used version 1.8.6.527. Make sure you set COM ( Under "Device Manager" ) to COM 41. Good luck !!! :good:

 

[thermopoli]

Hi there! Do you have the correct .dll and stock version for your phone? Try using a newer version of the flash tool.. I used version 1.8.6.527. Make sure you set COM ( Under "Device Manager" ) to COM 41. Good luck !!! :good:

No luck... :crying:

I'm still getting the "Model Information Check FAIL!" Notification.
The Model I'm using is labeled "Not for sale"

I updated the flash tool to verison 1.8.6.527 and checked the COM port to be 41

I'm actually not sure I have the correct .dll and tot-files. Is there a list for them?

Any suggestions

 

[Showtek1980]

No luck... :crying:

I'm still getting the "Model Information Check FAIL!" Notification.
The Model I'm using is labeled "Not for sale"

I updated the flash tool to verison 1.8.6.527 and checked the COM port to be 41

I'm actually not sure I have the correct .dll and tot-files. Is there a list for them?

Any suggestions

Make sure of your model number!!! Then post the model number and I'll check online for the correct .dll and tot files.


Go under " Settings, About Phone, Software Information "..

If you can't get into your system .. check your phone package.. On the box, it should have your model number.


https://www.bloglovin.com/blog/post/5233323/3045449639

http://www.mylgphones.com/lg-software-tools-download

http://forum.xda-developers.com/showthread.php?t=2772658

http://www.mylgphones.com/lg-finlan...ve-users-the-choice-of-3gb-or-2gb-of-ram.html


I really hope at least one the links above would assist you man!

 

[thermopoli]

Make sure of your model number!!! Then post the model number and I'll check online for the correct .dll and tot files.

Go under " Settings, About Phone, Software Information "..

If you can't get into your system .. check your phone package.. On the box, it should have your model number.

Thanks!

I'm quite certain that it's the D855, at least it says so in the box