[GUIDE][SOLVE]Hard-Brick lenovo a6000/+

Search This thread

soan0

Senior Member
Nov 1, 2016
199
58
Nashik,India
HELLO FRIENDS...

Many friend have face this problems i.e no recovery,no splash screen,no system only just a small vibration this is know as Hard-Brick..
This method will 100% works for both Lenovo a6000 and plus...

for this we need the following things....

Firmware-File
QPST Tool
and well working computer or Laptop..

Thing want to know before starting...

We will not use QPST tool for flashing this is optional. After installing QPST tool the error face by most computer will be fixed error like MSVCP100.dll error mostly this problem is face by 64bit OS..If you have installed 64bit try it if it's works then good if not then use your friend's PC which have 32bit OS or install 32bit OS
We will use flash tool which already given in Firmware zip.

Let's Start...:laugh:
After downloading the firmware You'll get firmware folder and Qualcomm Flash Tool and most important drivers folder there will be more files but no use of those file.
STEP 1.First extract this above 3 file in a folder where you want...then click on driver folder and then click on Qualcomm_USB_Driver_Setup.exe......setup will start...select the first option(WWWAN.DHCP........) and then next...further you can do.. while installation if a pop-up comes click on yes(all ways click on yes) after completion of driver installation please reboot or restart you are pc or laptop ..:good:

STEP 2...click on Qualcomm Flash Tool->QcomDLoader.exe if it start then good....and if there is an error like MSVCP100.dll not found or something else
then install QPST tool and run it. After opening it now close it..:p...Now again click on QcomDLoader.exe this time it will work:good:
then click on Load button(the first icon of the tool) then browse the firmware folder where u have extracted...then click on start(the 3 icon of the flash tool)

STEP 3:..Now remove Your sim card and memory card(if u don't have this then also remove your battery and then put it again)...;)

Now hold volume+ and volume - button(do not touch power button) and plug in vie usb... the flash will automatically start....
wait till it complete...after finish it will show finish in green color...then unplug the phone and hold power button to start...

This method is same for Lenovo a6000 plus the only different will be....it will show 1GB ram and 8GB internal storage

To fix this install any custom rom..,:good:

This method is tasted by me and it work for me I have Lenovo a6000 plus that's why I am sharing this with you all....


NOTE:-after coming back to KitKat you may face the problem of boot loop for 7.x.x rom or some feature of the rom may not work..to overcome this problem follow this
download this twrp KitKat version(not so important) you can use cwm(not tested) and direct flash the lollipop rom which contain system.img file in it eg. vibe 2.5(tested and works) ,color os 3.1 or any rom which contain system.img and reboot.:good:
do not use any pach file for upgrading to lollipop do direct flash lollipop rom.

I hope this will also work for you...
if this post help's you plz donate me on paytm...no 9763697739
if any problem occurs then please let me know..
 
Last edited:

soan0

Senior Member
Nov 1, 2016
199
58
Nashik,India
Screen Short

This is my phone info after flashing it.....
this is not Lenovo a6000 this SS in of Lenovo a6000 plus


Screenshot_2017-03-31-09-55-00.png

This after flashing custom Rom
Screenshot_2017-03-31-15-04-55-189.jpeg
 
Last edited:
  • Like
Reactions: sasukay

The Hard Gamer

Senior Member
Feb 11, 2016
686
928
21
Gotham
HELLO FRIENDS...

Many friend have face this problems i.e no recovery,no splash screen,no system only just a small vibration this is know as Hard-Brick..
This method will 100% works for both Lenovo a6000 and plus...

for this we need the following things....

Firmware-File(this is stock rom is for Lenovo a6000 but can be use for Lenovo a6000+)
QPST Tool
and well working computer or Laptop..

Thing want to know before starting...

We will not use QPST tool for flashing this is optional. After installing QPST tool the error face by most computer will be fixed error like MSVCP100.dll error mostly this problem is face by 64bit OS..If you have installed 64bit try it if it's works then good if not then use your friend's PC which have 32bit OS or install 32bit OS
We will use flash tool which already given in Firmware zip.

Let's Start...:laugh:
After downloading the firmware You'll get firmware folder and Qualcomm Flash Tool and most important drivers folder there will be more files but no use of those file.
STEP 1.First extract this above 3 file in a folder where you want...then click on driver folder and then click on Qualcomm_USB_Driver_Setup.exe......setup will start...select the first option(WWWAN.DHCP........) and then next...further you can do.. while installation if a pop-up comes click on yes(all ways click on yes) after completion of driver installation please reboot or restart you are pc or laptop ..:good:

STEP 2...click on Qualcomm Flash Tool->QcomDLoader.exe if it start then good....and if there is an error like MSVCP100.dll not found or something else
then install QPST tool and run it. After opening it now close it..:p...Now again click on QcomDLoader.exe this time it will work:good:
then click on Load button(the first icon of the tool) then browse the firmware folder where u have extracted...then click on start(the 3 icon of the flash tool)

STEP 3:..Now remove Your sim card and memory card(if u don't have this then also remove your battery and then put it again)...;)

Now hold volume+ and volume - button(do not touch power button) and plug in vie usb... the flash will automatically start....
wait till it complete...after finish it will show finish in green color...then unplug the phone and hold power button to start...

This method is same for Lenovo a6000 plus the only different will be....it will show 1GB ram and 8GB internal storage

To fix this install any custom rom..,:good:

This method is tasted by me and it work for me I have Lenovo a6000 plus that's why I am sharing this with you all....


I hope this will also work for you...

if any problem occurs then please let me know..

For some people who dont get their phones detected need to open their motherboard and short the two points located beside memory card slot
 
  • Like
Reactions: sasukay

soan0

Senior Member
Nov 1, 2016
199
58
Nashik,India
The phone boots shows logo restarting and it keeps on restarting

install any custom rom or do factor reset
if you have done this above but still have the problem then answer my question
u r currently instead rom android version ?
is custom recovery is flashed?
do u have used any patch zip to upgrade or downgrade the android version ?
 
  • Like
Reactions: chriselanko

chriselanko

Senior Member
Nov 15, 2013
82
40
install any custom rom or do factor reset
if you have done this above but still have the problem then answer my question
u r currently instead rom android version ?
is custom recovery is flashed?
do u have used any patch zip to upgrade or downgrade the android version ?

I am not able to acess recovery mode.
can enter fastboot but not recovery.
I have also attached the screenshot of final status while flashing.
I followed all steps .
 

Attachments

  • Untitled.jpg
    Untitled.jpg
    60.5 KB · Views: 3,176

shivanshusuraj

Senior Member
Dec 14, 2015
101
44
delhi
www.youtube.com
bro its taking too much time what to do its tooked about 11 min and still okeep going

HELLO FRIENDS...

Many friend have face this problems i.e no recovery,no splash screen,no system only just a small vibration this is know as Hard-Brick..
This method will 100% works for both Lenovo a6000 and plus...

for this we need the following things....

Firmware-File(this is stock rom is for Lenovo a6000 but can be use for Lenovo a6000+)
QPST Tool
and well working computer or Laptop..

Thing want to know before starting...

We will not use QPST tool for flashing this is optional. After installing QPST tool the error face by most computer will be fixed error like MSVCP100.dll error mostly this problem is face by 64bit OS..If you have installed 64bit try it if it's works then good if not then use your friend's PC which have 32bit OS or install 32bit OS
We will use flash tool which already given in Firmware zip.

Let's Start...:laugh:
After downloading the firmware You'll get firmware folder and Qualcomm Flash Tool and most important drivers folder there will be more files but no use of those file.
STEP 1.First extract this above 3 file in a folder where you want...then click on driver folder and then click on Qualcomm_USB_Driver_Setup.exe......setup will start...select the first option(WWWAN.DHCP........) and then next...further you can do.. while installation if a pop-up comes click on yes(all ways click on yes) after completion of driver installation please reboot or restart you are pc or laptop ..:good:

STEP 2...click on Qualcomm Flash Tool->QcomDLoader.exe if it start then good....and if there is an error like MSVCP100.dll not found or something else
then install QPST tool and run it. After opening it now close it..:p...Now again click on QcomDLoader.exe this time it will work:good:
then click on Load button(the first icon of the tool) then browse the firmware folder where u have extracted...then click on start(the 3 icon of the flash tool)

STEP 3:..Now remove Your sim card and memory card(if u don't have this then also remove your battery and then put it again)...;)

Now hold volume+ and volume - button(do not touch power button) and plug in vie usb... the flash will automatically start....
wait till it complete...after finish it will show finish in green color...then unplug the phone and hold power button to start...

This method is same for Lenovo a6000 plus the only different will be....it will show 1GB ram and 8GB internal storage

To fix this install any custom rom..,:good:

This method is tasted by me and it work for me I have Lenovo a6000 plus that's why I am sharing this with you all....


NOTE:-after coming back to KitKat you may face the problem of boot loop for 7.x.x rom or some feature of the rom may not work..to overcome this problem follow this
download this twrp KitKat version(not so important) you can use cwm(not tested) and direct flash the lollipop rom which contain system.img file in it eg. vibe 2.5(tested and works) ,color os 3.1 or any rom which contain system.img and reboot.:good:
do not use any pach file for upgrading to lollipop do direct flash lollipop rom.

I hope this will also work for you...

if any problem occurs then please let me know..

its taking too much time and keep going what to doo
 

shivanshusuraj

Senior Member
Dec 14, 2015
101
44
delhi
www.youtube.com
yes i remover all things no sim no memory and i hode both volume key then plug usb

which buttons u have pressed at the start
bro turn off u r phone then remove u r sim and memory card (not necessary) then press and hold volume + and volume - (don't touch power button )together till u feel a soft vibration then only connect to u r pc


yes i remover all things no sim no memory and i hode both volume key then plug usb and then it vibrate and connected but its took 23 min but not done then i remover usb directly
 

soan0

Senior Member
Nov 1, 2016
199
58
Nashik,India
I am not able to acess recovery mode.
can enter fastboot but not recovery.
I have also attached the screenshot of final status while flashing.
I followed all steps .
bro now u can flash custom recovery i.e TWRP,CWM as par u r android version
i think u know that how to do ..if not then plz check how to flash twrp or cwm in Lenovo a6000
 

soan0

Senior Member
Nov 1, 2016
199
58
Nashik,India
yes i remover all things no sim no memory and i hode both volume key then plug usb and then it vibrate and connected but its took 23 min but not done then i remover usb directly
u r drivers are install properly plz check which phone do u have
if u have serious problem then whatsapp me 9763697739
 
Last edited:

chriselanko

Senior Member
Nov 15, 2013
82
40
Still Bootlooping / no recovery

bro now u can flash custom recovery i.e TWRP,CWM as par u r android version
i think u know that how to do ..if not then plz check how to flash twrp or cwm in Lenovo a6000

1) Flashed Sucessfully the given frimware using the tool in the folder.
2) Phone still in boot loop.
3) Tried to flash Twrp image you mentioned in this thread, it flashed sucessfully but cannot able to acess recovery by hardware button combinations or by any means.
4)Tried Flashing Vibe 2.5 Lollipop ROM using fastboot ( using command fastboot update E:\vibe.zip ). It showing errors like
" archive does not contain 'android-info.txt'
archive does not contain 'android-product.txt'
error: update package has no android-info.txt or android-product.txt
"
5) Please help me with this and tell me where was I wrong. Am not a PRO, just a beginner So please give detailed instructions if am wrong. Thank you @soan0
 

soan0

Senior Member
Nov 1, 2016
199
58
Nashik,India
1) Flashed Sucessfully the given frimware using the tool in the folder.
2) Phone still in boot loop.
3) Tried to flash Twrp image you mentioned in this thread, it flashed sucessfully but cannot able to acess recovery by hardware button combinations or by any means.
4)Tried Flashing Vibe 2.5 Lollipop ROM using fastboot ( using command fastboot update E:\vibe.zip ). It showing errors like
" archive does not contain 'android-info.txt'
archive does not contain 'android-product.txt'
error: update package has no android-info.txt or android-product.txt
"
5) Please help me with this and tell me where was I wrong. Am not a PRO, just a beginner So please give detailed instructions if am wrong. Thank you @soan0
Bro after flashing wait for few min it take time to boot up
And try to flash vibeui 2.5 by twrp which i have given the link if still have a problem then whatsapp me or call so that i can understand u r problem correctly
9763697739
 
  • Like
Reactions: chriselanko

chriselanko

Senior Member
Nov 15, 2013
82
40
Bro after flashing wait for few min it take time to boot up
And try to flash vibeui 2.5 by twrp which i have given the link if still have a problem then whatsapp me or call so that i can understand u r problem correctly
9763697739

After flashing , i just power on the device and left it. it just keeps on restarting. (ie what i mentioned as boot loop).
I cannot acess TWRP then how can i flash vibe 2.5 using it.
Sry I didnt get you, I send the video of the phone in your whatsapp number.
even using " fastboot boot twrp.img" command it is showing sucessful in cmd promt but while device keeps restarting
 
  • Like
Reactions: hizar

Top Liked Posts

  • There are no posts matching your filters.
  • 8
    HELLO FRIENDS...

    Many friend have face this problems i.e no recovery,no splash screen,no system only just a small vibration this is know as Hard-Brick..
    This method will 100% works for both Lenovo a6000 and plus...

    for this we need the following things....

    Firmware-File
    QPST Tool
    and well working computer or Laptop..

    Thing want to know before starting...

    We will not use QPST tool for flashing this is optional. After installing QPST tool the error face by most computer will be fixed error like MSVCP100.dll error mostly this problem is face by 64bit OS..If you have installed 64bit try it if it's works then good if not then use your friend's PC which have 32bit OS or install 32bit OS
    We will use flash tool which already given in Firmware zip.

    Let's Start...:laugh:
    After downloading the firmware You'll get firmware folder and Qualcomm Flash Tool and most important drivers folder there will be more files but no use of those file.
    STEP 1.First extract this above 3 file in a folder where you want...then click on driver folder and then click on Qualcomm_USB_Driver_Setup.exe......setup will start...select the first option(WWWAN.DHCP........) and then next...further you can do.. while installation if a pop-up comes click on yes(all ways click on yes) after completion of driver installation please reboot or restart you are pc or laptop ..:good:

    STEP 2...click on Qualcomm Flash Tool->QcomDLoader.exe if it start then good....and if there is an error like MSVCP100.dll not found or something else
    then install QPST tool and run it. After opening it now close it..:p...Now again click on QcomDLoader.exe this time it will work:good:
    then click on Load button(the first icon of the tool) then browse the firmware folder where u have extracted...then click on start(the 3 icon of the flash tool)

    STEP 3:..Now remove Your sim card and memory card(if u don't have this then also remove your battery and then put it again)...;)

    Now hold volume+ and volume - button(do not touch power button) and plug in vie usb... the flash will automatically start....
    wait till it complete...after finish it will show finish in green color...then unplug the phone and hold power button to start...

    This method is same for Lenovo a6000 plus the only different will be....it will show 1GB ram and 8GB internal storage

    To fix this install any custom rom..,:good:

    This method is tasted by me and it work for me I have Lenovo a6000 plus that's why I am sharing this with you all....


    NOTE:-after coming back to KitKat you may face the problem of boot loop for 7.x.x rom or some feature of the rom may not work..to overcome this problem follow this
    download this twrp KitKat version(not so important) you can use cwm(not tested) and direct flash the lollipop rom which contain system.img file in it eg. vibe 2.5(tested and works) ,color os 3.1 or any rom which contain system.img and reboot.:good:
    do not use any pach file for upgrading to lollipop do direct flash lollipop rom.

    I hope this will also work for you...
    if this post help's you plz donate me on paytm...no 9763697739
    if any problem occurs then please let me know..
    2
    I'm also facing same problem(unable to connect the hard bricked lenovo a6000+ to PC.).. So please update the new img& help us ... Many more thanks in advance..
    SHORT these two points that are marked in image with white color
    1
    Screen Short

    This is my phone info after flashing it.....
    this is not Lenovo a6000 this SS in of Lenovo a6000 plus


    Screenshot_2017-03-31-09-55-00.png

    This after flashing custom Rom
    Screenshot_2017-03-31-15-04-55-189.jpeg
    1
    HELLO FRIENDS...

    Many friend have face this problems i.e no recovery,no splash screen,no system only just a small vibration this is know as Hard-Brick..
    This method will 100% works for both Lenovo a6000 and plus...

    for this we need the following things....

    Firmware-File(this is stock rom is for Lenovo a6000 but can be use for Lenovo a6000+)
    QPST Tool
    and well working computer or Laptop..

    Thing want to know before starting...

    We will not use QPST tool for flashing this is optional. After installing QPST tool the error face by most computer will be fixed error like MSVCP100.dll error mostly this problem is face by 64bit OS..If you have installed 64bit try it if it's works then good if not then use your friend's PC which have 32bit OS or install 32bit OS
    We will use flash tool which already given in Firmware zip.

    Let's Start...:laugh:
    After downloading the firmware You'll get firmware folder and Qualcomm Flash Tool and most important drivers folder there will be more files but no use of those file.
    STEP 1.First extract this above 3 file in a folder where you want...then click on driver folder and then click on Qualcomm_USB_Driver_Setup.exe......setup will start...select the first option(WWWAN.DHCP........) and then next...further you can do.. while installation if a pop-up comes click on yes(all ways click on yes) after completion of driver installation please reboot or restart you are pc or laptop ..:good:

    STEP 2...click on Qualcomm Flash Tool->QcomDLoader.exe if it start then good....and if there is an error like MSVCP100.dll not found or something else
    then install QPST tool and run it. After opening it now close it..:p...Now again click on QcomDLoader.exe this time it will work:good:
    then click on Load button(the first icon of the tool) then browse the firmware folder where u have extracted...then click on start(the 3 icon of the flash tool)

    STEP 3:..Now remove Your sim card and memory card(if u don't have this then also remove your battery and then put it again)...;)

    Now hold volume+ and volume - button(do not touch power button) and plug in vie usb... the flash will automatically start....
    wait till it complete...after finish it will show finish in green color...then unplug the phone and hold power button to start...

    This method is same for Lenovo a6000 plus the only different will be....it will show 1GB ram and 8GB internal storage

    To fix this install any custom rom..,:good:

    This method is tasted by me and it work for me I have Lenovo a6000 plus that's why I am sharing this with you all....


    I hope this will also work for you...

    if any problem occurs then please let me know..

    For some people who dont get their phones detected need to open their motherboard and short the two points located beside memory card slot
    1
    I took it to repair shop, they said the phone is dead. And I bought myself a new phone. But I really miss all these root and custom rom stuff a lot.
    Yeah man I too miss all that stuff, I also got a new phone.. But the love is always A600 plus....
Our Apps
Get our official app!
The best way to access XDA on your phone
Nav Gestures
Add swipe gestures to any Android
One Handed Mode
Eases uses one hand with your phone