:highfive: i successfully installed HSPL, made my own Y-cable, used Sony Ericsson USB Card reader and Sony 4GB card(both came with Sony Ericsson W705) , worked like charm :good:
[GUIDE] Step-by-step instructions for debranding and HSPL for AT&T Titans
- Thread starter pbp8ntballer
- Start date
-
- Tags
- development
Hello,
Thanks for help.
I will recommend to use progam USBLyser: it has 30 days trial version it should be enough.
Note you should start logging before starting HSPL program.
You may need to increase capture buffer in the settings.
Save log as HTML at the end.
Best regards,
-Cotulla
guys lets get this to cotulla so we can finally be able to install 7.8 in our titan
Thanks for help.
I will recommend to use progam USBLyser: it has 30 days trial version it should be enough.
Note you should start logging before starting HSPL program.
You may need to increase capture buffer in the settings.
Save log as HTML at the end.
Best regards,
-Cotulla
guys lets get this to cotulla so we can finally be able to install 7.8 in our titan
Hey guys i'm in a pinch, my AT&T stock Titan wont load any roms. I cant get the Euro rom on it or spl or anything. Just stays and Enter Usb Host mode... help?
He already posted this:
http://forum.xda-developers.com/showthread.php?t=1923667
I strongly suspect he's doing something wrong or he'll have to change the micro sd adapter for a sd card reader.
I've used this whole setup before on a different AT&T TITAN but had to get it replaced. When i got this one I tried it again and it didnt work. Obviously im doing something wrong, that's why I asked for help. and the phone is carrier locked. All my phones have been all to AT&T.
Gold Card img
Where can I download a goldcard img filr?. The link in the tutorial is broken
Thanks
Where can I download a goldcard img filr?. The link in the tutorial is broken
Thanks
Ok, I haven't read the whole thread, but I can't get the phone to read the gold card. I followed this guide step by step (and even other guides too). Once I saw the little led on the sd adapter on and the phone displayed "loading", but then the light turned off and after half an hour it was still with "loading", so I disconnected the cables and started over. After several other trys nothing happened. I think that the cable (it's not home made, I bought it done) and sd card and adapter work all fine, since I got a positive response once. The procedure for creating the gold card is not so complicated so I think I did it properly. But I still can't get it to work with the phone. Any suggestions?
I bought it on the internet, not so expensive. Anyway I tried the procedure but with no result. But I believe it's just me. That's why I asked for help, but nobody answered...
All answers are in the treat, everyone that manage to do HSPL explained how was done, what equipment was used etc etc... so READ before posting
I read all the posts at the beginning and I followed all the instructions. But I'm stuck at the beginning since I can't get the phone to read the gold card. I didn't read the whole thread because everyone explains what to do AFTER the gold card part, but I need help for the part BEFORE that.
I tried with two different sd cards. I patched with the gold card file before and after putting the file img on it. I tried connecting all the cables before and after connecting to the electric plug. I tried all the possible combinations, but when I enter in usb host mode it stucks and nothing happens. Just once it appeared "loading", but after half an hour still nothing else happened (it was stuck on "loading" and the sd card reader was off while its led was on at the beginning when it appeared the "loading" on the display). I really don't know what I did wrong. I'm asking for help. But all you can say is "read". I read and didn't find the answer, can you help me?
I tried with two different sd cards. I patched with the gold card file before and after putting the file img on it. I tried connecting all the cables before and after connecting to the electric plug. I tried all the possible combinations, but when I enter in usb host mode it stucks and nothing happens. Just once it appeared "loading", but after half an hour still nothing else happened (it was stuck on "loading" and the sd card reader was off while its led was on at the beginning when it appeared the "loading" on the display). I really don't know what I did wrong. I'm asking for help. But all you can say is "read". I read and didn't find the answer, can you help me?
I wrote how i did it, i do not think its the procedure, but the hardware, try to find Sony Ericsson USB memory reader like this http://www.comparestoreprices.co.uk/images/so/sony-ericsson-memory-stick-micro-m2-usb-adapter--ccr-70.jpg and a Sony memory card like this http://www.intomobilephones.co.uk/application/media/accessories/742.jpg they both come from Sony Ericsson W705 package, worked for me like charm.
Ok, thank you. I will try finding new hardware. I already bought three sd card adapters...
I thought it wasn't the hardware because it almost worked once, so I believed it was something else. Anyway I will try again and see if I manage to make it work.
Anyway, the picture you linked shows a 4 gb card. But on the guide it says it must be either 1 or 2 gb card. Do you confirm it works with 4 gb as well?
I thought it wasn't the hardware because it almost worked once, so I believed it was something else. Anyway I will try again and see if I manage to make it work.
Anyway, the picture you linked shows a 4 gb card. But on the guide it says it must be either 1 or 2 gb card. Do you confirm it works with 4 gb as well?
Try a USB Flash drive, I had bought multiple SD cards with readers and no luck. Also, attach the drive last when making the connections with the y-cable.
Ok, bought a new sd card reader and a new 2gb sd card. Now it works at the beginning. It displays loading, then begins installing, but then it reboots on its own. After like two seconds so that I can't even read what it's written there. Nor see the progress bar starting
Any idea? Should I buy new hardware? Maybe the usb cable? I think it's not the sd or the sd reader, but I hope someone can help me suggesting me what I should replace... I'm buying everything at low cost, but after three sd card reader, three sd cards and a Y usb cable and usb female-female adapter it's starting to be not so cheap...
Any idea? Should I buy new hardware? Maybe the usb cable? I think it's not the sd or the sd reader, but I hope someone can help me suggesting me what I should replace... I'm buying everything at low cost, but after three sd card reader, three sd cards and a Y usb cable and usb female-female adapter it's starting to be not so cheap...
Re: help with request from cotulla
Originally Posted by elmanortega
Originally Posted by Cotulla
Hello,
yes, I am ok
What about this week end? I will be at home whole Saturday.
For communication/coordination we can use #htc-linux IRC.
But I need to know person which will provide test access for me. Will it be u?
-Cotulla
hey boss ive been waiting for you
is there a better way to comunicate?
We can communicate in IRC #htc-linux. I am there often (Cotulla).
Find me there and send me a private message .
-Cotulla
i need some help here
Originally Posted by elmanortega
Originally Posted by Cotulla
Hello,
yes, I am ok
What about this week end? I will be at home whole Saturday.
For communication/coordination we can use #htc-linux IRC.
But I need to know person which will provide test access for me. Will it be u?
-Cotulla
hey boss ive been waiting for you
is there a better way to comunicate?
We can communicate in IRC #htc-linux. I am there often (Cotulla).
Find me there and send me a private message .
-Cotulla
i need some help here
Our Apps
Get our official app!
The best way to access XDA on your phone
Nav Gestures
Add swipe gestures to any Android
One Handed Mode
Eases uses one hand with your phone