• Introducing XDA Computing: Discussion zones for Hardware, Software, and more!    Check it out!

[GUIDE] [STOCK ROM] [ODIN] Flashing Stock Rom

Search This thread

LittlEvil

Senior Member
Jul 3, 2014
254
369
Looking for it
Flashing Stock Rom for Samsung Grand Prime

When you are attempt to install rom kernel tweaks etc by instruction when something wrong happened to your phone is brick this is the only way to revert your phone to stock rom and fixing the brick phone which means you are going to in android kitkat 4.4.4 in your phone no modified. in this process if your phone brick neither xda nor me will not responsible for it do at your own risk. these guide is tested on grand prime


i have made this guide for noobs who want to flash their phone

Want to Understand firmware name go here credit @marcussmith2626

Required
1.Samsung USB Driver
2.Odin from here http://odindownload.com/ Please Download Odin 3.0.7 otherwise you will get error
3.Stcok Firmware (In the search box enter your model then select your region then download)
4.Please Maintain battery between 40+
5.PC or Laptop
6.USB

Instructions
Don't Skip any step
1.Download the USB Driver Install in our computer
2.Download the firmware from and extract you will see file tar.md5
3.Power off your grand prime
4.Boot into download mode by pushing volume down + home + power together
5.Press volume up
6.Connect the usb between mobile and computer
7.Extract Odin zip
8.Open Odin.exe
9.When You open you will see yellow color in BOX that means your phone is connected
10.Now Click on PDA and browse to the extract of the firmware and select where the file is firmware file located
11.When the process complete unplug your phone
12.when your phone reboot remove your battery
13.Now push Volume up + power + home together to go in recovery
14.Now navigate to wipe data reset by pressing volume up /down
15.Click on wipe data reset by pressing power
16.Again Navigate to reboot system now and click on it
27.Be patient first boot may take time

Credits
@marcussmith2626
samsung
xda
 
Last edited:

xufy3n

Member
Feb 28, 2015
8
1
32
Gujrat
grand prime

Flashing Stock Rom for Samsung Grand Prime

When you are attempt to install rom kernel tweaks etc by instruction when something wrong happened to your phone is brick this is the only way to revert your phone to stock rom and fixing the brick phone which means you are going to in android kitkat 4.4.4 in your phone no modified. in this process if your phone brick neither xda nor me will not responsible for it do at your own risk. these guide is tested on grand prime


i have made this guide for noobs who want to flash their phone

Want to Understand firmware name go here credit @marcussmith2626

Required
1.Samsung USB Driver
2.Odin from here http://odindownload.com/
3.Stcok Firmware (In the search box enter your model then select your region then download)
4.Please Maintain battery between 40+
5.Pc or Laptop
6.USB

Instructions
Don't Skip any step
1.Download the USB Driver Install in our computer
2.Download the firmware from and extract you will see file tar.md5
3.Power off your grand prime
4.Boot into download mode by pushing volume down + home + power together
5.Press volume up
6.Connect the usb between mobile and computer
7.Extract Odin zip
8.Open Odin.exe
9.When You open you will see yellow color in BOX that means your phone is connected
10.Now Click on PDA and browse to the extract of the firmware and select where pda in file
11.Now Click on CSC and browse to the extract of the firmware and select where csc in file
12.Now click on PHONE and browse to the extract of the firmware and select where modem in file
13.After that click on start button
14.When the process complete unplug your phone
15.when your phone reboot remove your battery
16.Now push Volume up + power + home together to go in recovery
17.Now navigate to wipe data reset by pressing volume up /down
18.Click on wipe data reset by pressing power
19.Again Navigate to reboot system now and click on it
20.Be patient first boot may take time

Credits
@marcussmith2626
samsung
xda

where can i get these 3 files?
10.Now Click on PDA and browse to the extract of the firmware and select where pda in file
11.Now Click on CSC and browse to the extract of the firmware and select where csc in file
12.Now click on PHONE and browse to the extract of the firmware and select where modem in file

in the firmware only 1 file is downloaded....
 

LittlEvil

Senior Member
Jul 3, 2014
254
369
Looking for it
where can i get these 3 files?
10.Now Click on PDA and browse to the extract of the firmware and select where pda in file
11.Now Click on CSC and browse to the extract of the firmware and select where csc in file
12.Now click on PHONE and browse to the extract of the firmware and select where modem in file

in the firmware only 1 file is downloaded....
Screenshot pls:rolleyes:
 

Jeewan Deep

Senior Member
Jun 2, 2013
159
17
kolkata
This is how i did.....

I hvae 3.0.7 and 3.10.6 Odin3.

Downloaded the driver... installed it....
I just put the stock rom file in PDA and booted my phone to download mod.. . .. . . . .
Waited it to show the word added in the white box section in the tool...dn pressed start....
After its finished let it reboot nd dnt take the cable out.... (just like that)
(If u want.... go to the recovery and format it and done) or else its already done.;)

No probs . :fingers-crossed::good:
 
  • Like
Reactions: Cricket Droid

pjunior1976

New member
Mar 10, 2015
1
0
Hi Guys,

When I bought my Grand Prime I installed the ROM G530HVJU1ANI8 and it works so I installed the new version G530HZTM1ANJ2 and it works too.
Now there are two new versions for my region that show up a message error like that : Odin just errors: Failed [Auth].

I used the Odin 3.07 and 3.09 versions

I'm using the Odin with only one file in extracted file choosing the file as pda

2014-09-01 Brazil (TIM) 4.4.4 G530HVJU1ANI8 G530HZTM1ANI8 - OK
2014-11-01 Brazil (TIM) 4.4.4 G530HVJU1ANJ2 G530HZTM1ANJ2 - OK
2015-02-01 Brazil (TIM) 4.4.4 G530HVCU1ANL4 G530HZTM1ANL4 - failed
2015-03-01 Brazil (TIM) 4.4.4 G530HVCU1AOB1 G530HZTM1AOB1 - failed

Someone from BR updated the recently ROM sucessfully or someone can help me to update ?

The mobile is not rooted.

Thanks
 

cdaarif

Senior Member
Apr 12, 2012
578
131
Xiaomi Redmi 3S
Hi Guys,

When I bought my Grand Prime I installed the ROM G530HVJU1ANI8 and it works so I installed the new version G530HZTM1ANJ2 and it works too.
Now there are two new versions for my region that show up a message error like that : Odin just errors: Failed [Auth].

I used the Odin 3.07 and 3.09 versions

I'm using the Odin with only one file in extracted file choosing the file as pda

2014-09-01 Brazil (TIM) 4.4.4 G530HVJU1ANI8 G530HZTM1ANI8 - OK
2014-11-01 Brazil (TIM) 4.4.4 G530HVJU1ANJ2 G530HZTM1ANJ2 - OK
2015-02-01 Brazil (TIM) 4.4.4 G530HVCU1ANL4 G530HZTM1ANL4 - failed
2015-03-01 Brazil (TIM) 4.4.4 G530HVCU1AOB1 G530HZTM1AOB1 - failed

Someone from BR updated the recently ROM sucessfully or someone can help me to update ?

The mobile is not rooted.

Thanks

Hay I'm from Bangladesh. My cse is xef south Africa. Failed to update new firmware of south Africans n Brazilian ( tim). these r curapted n failed. So I successfully update new Kazakhstan firmware by Odin 3.10. 6 n its ok. Link: http://forum.xda-developers.com/showthread.php?t=2711451, Oh my bd mobile network is free n SIM is unlock also.
Edit: Rooted my phone by "cf auto root by mohon" n works well.
Happy flashing :D
 
Last edited:

cdaarif

Senior Member
Apr 12, 2012
578
131
Xiaomi Redmi 3S
Hay I'm from Bangladesh. My cse is xef south Africa. Failed to update new firmware of south Africans n Brazilian ( tim). these r curapted n failed. So I successfully update new Kazakhstan firmware by Odin 3.10. 6 n its ok. Oh my bd mobile network is free n SIM is unlock also.
Edit: Rooted my phone by "cf auto root by mohon" n works well
Happy flashing :D
 

Attachments

  • 1426529201385.jpg
    1426529201385.jpg
    60 KB · Views: 1,950

I2on4ld

New member
Mar 20, 2015
4
2
FAIL (AUTH)

For ppl who try flashing your device with new released firmware and got a message say "FAIL (AUTH)" in your odin,.. it is means you downloaded the wrong firmware region and that firmware is not compatible with your device..

You can try download another firmware region and re-try flash you device,..

My device is SM-G530H made in vietnam, i bough this phone on my country indonesian,..
The firmware worked for my device is kazakhstan region (i flashed it on early Feb and worked well) and also indonesian region (i flashed it on early March and worked well also)

Hope this helps
 
  • Like
Reactions: cachok9999

Top Liked Posts

  • There are no posts matching your filters.
  • 13
    Flashing Stock Rom for Samsung Grand Prime

    When you are attempt to install rom kernel tweaks etc by instruction when something wrong happened to your phone is brick this is the only way to revert your phone to stock rom and fixing the brick phone which means you are going to in android kitkat 4.4.4 in your phone no modified. in this process if your phone brick neither xda nor me will not responsible for it do at your own risk. these guide is tested on grand prime


    i have made this guide for noobs who want to flash their phone

    Want to Understand firmware name go here credit @marcussmith2626

    Required
    1.Samsung USB Driver
    2.Odin from here http://odindownload.com/ Please Download Odin 3.0.7 otherwise you will get error
    3.Stcok Firmware (In the search box enter your model then select your region then download)
    4.Please Maintain battery between 40+
    5.PC or Laptop
    6.USB

    Instructions
    Don't Skip any step
    1.Download the USB Driver Install in our computer
    2.Download the firmware from and extract you will see file tar.md5
    3.Power off your grand prime
    4.Boot into download mode by pushing volume down + home + power together
    5.Press volume up
    6.Connect the usb between mobile and computer
    7.Extract Odin zip
    8.Open Odin.exe
    9.When You open you will see yellow color in BOX that means your phone is connected
    10.Now Click on PDA and browse to the extract of the firmware and select where the file is firmware file located
    11.When the process complete unplug your phone
    12.when your phone reboot remove your battery
    13.Now push Volume up + power + home together to go in recovery
    14.Now navigate to wipe data reset by pressing volume up /down
    15.Click on wipe data reset by pressing power
    16.Again Navigate to reboot system now and click on it
    27.Be patient first boot may take time

    Credits
    @marcussmith2626
    samsung
    xda
    1
    awesome...:good::good:
    1
    For those who get Only one file in extracted file you need to select the file as pda

    already did that with both firmwares, using odin 3.07 and 3.09, both failed n same error
    1
    This is how i did.....

    I hvae 3.0.7 and 3.10.6 Odin3.

    Downloaded the driver... installed it....
    I just put the stock rom file in PDA and booted my phone to download mod.. . .. . . . .
    Waited it to show the word added in the white box section in the tool...dn pressed start....
    After its finished let it reboot nd dnt take the cable out.... (just like that)
    (If u want.... go to the recovery and format it and done) or else its already done.;)

    No probs . :fingers-crossed::good:
    1
    FAIL (AUTH)

    For ppl who try flashing your device with new released firmware and got a message say "FAIL (AUTH)" in your odin,.. it is means you downloaded the wrong firmware region and that firmware is not compatible with your device..

    You can try download another firmware region and re-try flash you device,..

    My device is SM-G530H made in vietnam, i bough this phone on my country indonesian,..
    The firmware worked for my device is kazakhstan region (i flashed it on early Feb and worked well) and also indonesian region (i flashed it on early March and worked well also)

    Hope this helps