Flashing Stock Rom for Samsung Grand Prime
When you are attempt to install rom kernel tweaks etc by instruction when something wrong happened to your phone is brick this is the only way to revert your phone to stock rom and fixing the brick phone which means you are going to in android kitkat 4.4.4 in your phone no modified. in this process if your phone brick neither xda nor me will not responsible for it do at your own risk. these guide is tested on grand prime
i have made this guide for noobs who want to flash their phone
Want to Understand firmware name go here credit @marcussmith2626
Required
1.
Samsung USB Driver
2.Odin from here
http://odindownload.com/
3.
Stcok Firmware (In the search box enter your model then select your region then download)
4.Please Maintain battery between 40+
5.Pc or Laptop
6.USB
Instructions
Don't Skip any step
1.Download the USB Driver Install in our computer
2.Download the firmware from and extract you will see file tar.md5
3.Power off your grand prime
4.Boot into download mode by pushing volume down + home + power together
5.Press volume up
6.Connect the usb between mobile and computer
7.Extract Odin zip
8.Open Odin.exe
9.When You open you will see yellow color in BOX that means your phone is connected
10.Now Click on PDA and browse to the extract of the firmware and select where pda in file
11.Now Click on CSC and browse to the extract of the firmware and select where csc in file
12.Now click on PHONE and browse to the extract of the firmware and select where modem in file
13.After that click on start button
14.When the process complete unplug your phone
15.when your phone reboot remove your battery
16.Now push Volume up + power + home together to go in recovery
17.Now navigate to wipe data reset by pressing volume up /down
18.Click on wipe data reset by pressing power
19.Again Navigate to reboot system now and click on it
20.Be patient first boot may take time
Credits
@marcussmith2626
samsung
xda