[GUIDE] [STOCK ROM] [ODIN] Flashing Stock Rom
- Thread starter LittlEvil
- Start date
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G530HXCU1BOI2_G530HUUB1BOI2_G530HXCU1BOI2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> aboot.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
HELP!!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G530HXCU1BOI2_G530HUUB1BOI2_G530HXCU1BOI2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> aboot.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
HELP!!!
is it possible to install the stock firmware of another model of the same device on different devices, like the stock firmware of SM-G530H on SM-G530W
FRP lock is on and im stuck in bootloop how can i flash rom i dont have permission to flash any image because of the lock what can i do
do you have any mirror link to download stock firmware for Indonesian version? not from sam mobile coz very slow download and disconnected in the middle of download. thx
when i try to flash it shows aboot error.
[IMG="grand prime 530F"]https://drive.google.com/file/d/0B_oLl42slwiIaExYeHJwOXpUeVU/view?usp=sharing
---------- Post added at 09:05 AM ---------- Previous post was at 08:57 AM ----------
[IMG="grand prime 530F"]https://drive.google.com/open?id=0B_oLl42slwiINUtSZXlnUWprVms
[IMG="grand prime 530F"]https://drive.google.com/file/d/0B_oLl42slwiIaExYeHJwOXpUeVU/view?usp=sharing
---------- Post added at 09:05 AM ---------- Previous post was at 08:57 AM ----------
[IMG="grand prime 530F"]https://drive.google.com/open?id=0B_oLl42slwiINUtSZXlnUWprVms
What region code did u used, is it XSE or XID. Because there is two version in our region.
Thanks mate
Worked for my soft bricked SM-G530W Thank you
---------- Post added at 16:55 ---------- Previous post was at 16:47 ----------
Got some links for you guys to download Grand Prime stock firmwares: http://tsar3000.com/Joomla/index.ph...rime-lte-firmwares&catid=55:samsung&Itemid=82
Scroll down the page to "Download From:" and there's 2 mirrors. First mirror takes you to "android file host" where you can find stock firmware for more Samsung phones, and the second mirror takes you to "1fichier" where you can find the G530W lte can.
Thank you---------- Post added at 16:55 ---------- Previous post was at 16:47 ----------
Got some links for you guys to download Grand Prime stock firmwares: http://tsar3000.com/Joomla/index.ph...rime-lte-firmwares&catid=55:samsung&Itemid=82
Scroll down the page to "Download From:" and there's 2 mirrors. First mirror takes you to "android file host" where you can find stock firmware for more Samsung phones, and the second mirror takes you to "1fichier" where you can find the G530W lte can.
Flashes but does not resolve my boot loop
On my Galaxy Grand Prime SM-G531F, I am in stuck a boot loop with "Custom binary blocked by FRP" after my first attempt (ever) at a custom ROM. I *did* get the ROM installed and running, but then I messed with Xposed (?) and installed it when I should not have. That is what has put me in this loop.
HOWEVER, these instructions are not solving the problem for me! Although Odin does flash and gives me a green "Pass" sign, the phone stays in the loop when it reboots. Where do I go from here?
Note that it won't allow me to boot into recovery, either... only download. I did try to flash TWRP again, but that gets refused because of the FRP.
Many thanks in advance...
On my Galaxy Grand Prime SM-G531F, I am in stuck a boot loop with "Custom binary blocked by FRP" after my first attempt (ever) at a custom ROM. I *did* get the ROM installed and running, but then I messed with Xposed (?) and installed it when I should not have. That is what has put me in this loop.
HOWEVER, these instructions are not solving the problem for me! Although Odin does flash and gives me a green "Pass" sign, the phone stays in the loop when it reboots. Where do I go from here?
Note that it won't allow me to boot into recovery, either... only download. I did try to flash TWRP again, but that gets refused because of the FRP.
Many thanks in advance...
Last edited:
Similar threads
Top Liked Posts
-
There are no posts matching your filters.
-
13Flashing Stock Rom for Samsung Grand Prime
When you are attempt to install rom kernel tweaks etc by instruction when something wrong happened to your phone is brick this is the only way to revert your phone to stock rom and fixing the brick phone which means you are going to in android kitkat 4.4.4 in your phone no modified. in this process if your phone brick neither xda nor me will not responsible for it do at your own risk. these guide is tested on grand prime
i have made this guide for noobs who want to flash their phone
Want to Understand firmware name go here credit @marcussmith2626
Required
1.Samsung USB Driver
2.Odin from here http://odindownload.com/ Please Download Odin 3.0.7 otherwise you will get error
3.Stcok Firmware (In the search box enter your model then select your region then download)
4.Please Maintain battery between 40+
5.PC or Laptop
6.USB
Instructions
Don't Skip any step
1.Download the USB Driver Install in our computer
2.Download the firmware from and extract you will see file tar.md5
3.Power off your grand prime
4.Boot into download mode by pushing volume down + home + power together
5.Press volume up
6.Connect the usb between mobile and computer
7.Extract Odin zip
8.Open Odin.exe
9.When You open you will see yellow color in BOX that means your phone is connected
10.Now Click on PDA and browse to the extract of the firmware and select where the file is firmware file located
11.When the process complete unplug your phone
12.when your phone reboot remove your battery
13.Now push Volume up + power + home together to go in recovery
14.Now navigate to wipe data reset by pressing volume up /down
15.Click on wipe data reset by pressing power
16.Again Navigate to reboot system now and click on it
27.Be patient first boot may take time
Credits
@marcussmith2626
samsung
xda1
already did that with both firmwares, using odin 3.07 and 3.09, both failed n same error1This is how i did.....
I hvae 3.0.7 and 3.10.6 Odin3.
Downloaded the driver... installed it....
I just put the stock rom file in PDA and booted my phone to download mod.. . .. . . . .
Waited it to show the word added in the white box section in the tool...dn pressed start....
After its finished let it reboot nd dnt take the cable out.... (just like that)
(If u want.... go to the recovery and format it and done) or else its already done.
No probs . :fingers-crossed::good:1FAIL (AUTH)
For ppl who try flashing your device with new released firmware and got a message say "FAIL (AUTH)" in your odin,.. it is means you downloaded the wrong firmware region and that firmware is not compatible with your device..
You can try download another firmware region and re-try flash you device,..
My device is SM-G530H made in vietnam, i bough this phone on my country indonesian,..
The firmware worked for my device is kazakhstan region (i flashed it on early Feb and worked well) and also indonesian region (i flashed it on early March and worked well also)
Hope this helps
