Dear GT-I9100G community 
This is a safe way To switch between Chinese I9100G & international I9100G
NOTE:THIS Method work for u if u want to install Stock Roms ... So if u want AOSP / AKOP / ROOTBOX .. ROMS u Don't Need this !!
Warning :This TUTORIAL Is FOR I9100G. WILL NOT WORK ON OTHER DEVICES. I DON'T TAKE ANY RESPONSIBILITY IF YOU MESS UP AND BRICK YOUR DEVICE OR ANYTHING ELSE. USE AT YOUR OWN RISK.
INSTRUCTIONS
DOWNLOADS
International i9100g ( CHINESE TO INTER... )
Chinese i9100g ( INTER TO CHINESE ) Yes You Can
Here Some Stock Roms
Official Stock ICS Firmwares
CHECK OUT THIS THREAD
Check More Here
THANKS
codeworkx (for his Hard work )
Faryaab
sammobile.com
moschino_luv (For Files )
ICS_XD (for his Hard work )
And all Other Members For there hard work
Also Maybe a thanks For Me
This is a safe way To switch between Chinese I9100G & international I9100G
NOTE:THIS Method work for u if u want to install Stock Roms ... So if u want AOSP / AKOP / ROOTBOX .. ROMS u Don't Need this !!
Warning :This TUTORIAL Is FOR I9100G. WILL NOT WORK ON OTHER DEVICES. I DON'T TAKE ANY RESPONSIBILITY IF YOU MESS UP AND BRICK YOUR DEVICE OR ANYTHING ELSE. USE AT YOUR OWN RISK.
INSTRUCTIONS
First Do a Full Wipe From Recovery (Cache .. Data ..etc)
- Then Remove the battery and connect your i9100g with a USB cable !
- Manual Load Driver for OMAP4430 From usb_drv_windows folder (included in download content )
- if the device keep reconnecting automatically... then it's okey it's not a problem !
- If everything is okey then run omap4430hs_espresso_Inter i9100g.bat
- if it's done should take like 7s ... remove your i9100g from usb cable... boot into Download Mod You should be able to read ur Product Name... if it's I9100G_CHN_CHN then u didn't do like i say if u found Product name I9100G then Congratulation
- So If Product Name is i9100g Flash Any Stock ROM u want not Chinese Stock ROMS.
- when u finish flashing a stock rom make a full wipe again ( data ; cache ).
- Reboot
-DONE- Then Remove the battery and connect your i9100g with a USB cable !
- Manual Load Driver for OMAP4430 From usb_drv_windows folder (included in download content )
- if the device keep reconnecting automatically... then it's okey it's not a problem !
- If everything is okey then run omap4430hs_espresso_Inter i9100g.bat
- if it's done should take like 7s ... remove your i9100g from usb cable... boot into Download Mod You should be able to read ur Product Name... if it's I9100G_CHN_CHN then u didn't do like i say if u found Product name I9100G then Congratulation
- So If Product Name is i9100g Flash Any Stock ROM u want not Chinese Stock ROMS.
- when u finish flashing a stock rom make a full wipe again ( data ; cache ).
- Reboot
- If u got Inter I9100g or u want back your Chinese Stock ROMS Do the same but run this omap4430hs_espresso_Chines i9100g.bat
DOWNLOADS
International i9100g ( CHINESE TO INTER... )
Chinese i9100g ( INTER TO CHINESE ) Yes You Can
Here Some Stock Roms
Official Stock ICS Firmwares
CHECK OUT THIS THREAD
Check More Here
THANKS
codeworkx (for his Hard work )
Faryaab
sammobile.com
moschino_luv (For Files )
ICS_XD (for his Hard work )
And all Other Members For there hard work
Also Maybe a thanks For Me
Last edited: