How To Guide Guide to disable Knox and privacy intrusion on Samsung A7 Tab [NO ROOT]
- Thread starter starkprime74
- Start date
What is the exact issue in installing from chrome? Like what does it sayInstallation from Chrome does not work for me. Has this been patched? Because other FRP Removals had similar methods where you download a app in Chrome but none of them work cause of this.
It doesn't let me. That is why I been stuck. Chrome needs a update also but I can't do that either cause the Google Account thing. So idk if that is why or something else.
Last edited:
What happens when you click on setting in the pop up
Or it just stays there and nothing happens
So when I click on settings. Nothing pops up both windows(Quickshortcutemaker and Chrome Security message) just close.
Not really I have done 5 tablets till now and didn't face anything like this
Maybe you can try flashing a firmware over again
Hmm ok so it's not patched. Ya I will flash again on Odin3 and see if it helps.
Wiped Partion, Factory Reset, and Re Flashed twice. And still the same thing. Sucks I been at this since Friday 6:00pm hitting wall after wall.
Quick question why is the User Data Left empty in Odin 3? Is it posssible to have.... User Data file made where I can install Apk's from Download in Chrome without the security message for Chrome popping up? Is something like this possible?
Quick question why is the User Data Left empty in Odin 3? Is it posssible to have.... User Data file made where I can install Apk's from Download in Chrome without the security message for Chrome popping up? Is something like this possible?
Last edited:
I just flashed the home file when I was flashing the tab
don't know if I was supposed to or notAlso have you tried any other firmware version? Like an older one or some other region one
Like the settings not opening up is kinda strange
Wait to so be clear...Your not adding AP,BL,Csc to Odin when flashing? Ur just putting in the Home Csc section only?I just flashed the home file when I was flashing the tab
Also have you tried any other firmware version? Like an older one or some other region one
Like the settings not opening up is kinda strange
No no no I did put all the 5 sections I am just selecting the home file in the user data field rather than leaving it empty
An no I haven't tried a older version, will try that next. Also wouldn't another region brick Tablet if not the same SM-T220 Model? Sorry I haven't been doing things like this for 10 years and first time Samsung anythingI just flashed the home file when I was flashing the tab
Also have you tried any other firmware version? Like an older one or some other region one
Like the settings not opening up is kinda stra
Oh no you need to make sure you do have the correct device firmware but the same device is sold in multiple regions and each have their own slightly seperate firmwaresAn no I haven't tried a older version, will try that next. Also wouldn't another region brick Tablet if not the same SM-T220 Model? Sorry I haven't been doing things like this for 10 years and first time Samsung anything
That way if it's a firmware issue you atleast have a chance that another region's firmware or an older one would solve that problem
Also the tablets I've and probably most others have worked on in this post is the T225 which is the wifi+lte variant maybe it is a firmware issue in the T220 that's why no one else has brought this one up
Thanks Insomniac appreciate you helping. I got another question cause this was why I was confused in Odin 3. So when I unpack the lastest T220 Firmware this what I see...I been putting the Csc file in the CP location. Is that correct? And I would put the Home Scs section in both Csc Section and User Data?
Attachments
You dont need a cp your variant is the wifi only version and since you don't have the sim functionality you don't need a cp file put the csc on the csc sectionThanks Insomniac appreciate you helping. I got another question cause this was why I was confused in Odin 3. So when I unpack the lastest T220 Firmware this what I see...I been putting the Csc file in the CP location. Is that correct? And I would put the Home Scs section in both Csc Section and User Data?
Similar threads
Top Liked Posts
-
There are no posts matching your filters.
-
7The method is derived from This post and does not require root access hence doesn't void Warranty or trips Knox:-
This is a Noob-friendly and Safe Method. The wireless debugging section might be new to people though.
This method is demonstrated in this youtube video as well and all the download links are given in the video description
Primary tools and methods used are:-
ADB Tools
FrpUnclock
SamsungDriver
Disabled Driver signature
Wireless debugging
Step:-1 [Preparing the device and using FRP remover]
First of all, reset the device (hard reset before removing any existing account )
Wipe Data and cache partition and reboot to system.
Select language and go to next
Accept conditions and proceed to wifi selection.
Login to your wifi and press back instead of going forward
Now you should get the language selection screen.
Connect your device to PC and launch FRP Tool.
For this tool to work properly in Windows 10, you must disable Driver Signature Enforcement.
Now in SamsunFRP tap on disable Driver Signature,
[Before proceeding ensure that the wifi connection on the phone is working]
Click on BypassFRP (It may ask to install the driver but you should install the driver given in below)
vlcsnap-2021-12-27-23h49m37s183.png
Once the application does its job you will see a pop-up on the tablet named Easy Firmware.
vlcsnap-2021-12-27-23h50m42s631.png
Step:-2 [Downloading QuickShortcut to ignore Knox]
Click on View and it will launch youtube then Chrome.
In chrome don't signup yet and in the search tab search for "vnrom"
select first link stating BYPASS GOOGLE ACCOUNT 2021 - vNORM.net
On the opened page scroll and download "QuickShortCutMaker.apk"
Allow installation from chrome and launch the application.
[Disconnect from your WIFI]
In the application search box search for "Setup"
Expand the Android Setup and select the last section (Just above the other "Android Setup" with Clock Logo)
vlcsnap-2021-12-27-23h52m16s102.png
Select Try
vlcsnap-2021-12-27-23h53m14s399.png
It will show Preparing for Setup... (let it take its time)
It will soon display the screen. Now lock the device and use the notification drawer to access settings
Knox might try to peep in but keep using the notification drawer to access settings.
Under the settings use developer mode (re-enable if not visible)
Step 3:- Using Wireless Debugging to disable knox permanently
Ensure pc and device on same network and disable any internet connection.
Ensure there is only LAN but no internet access as here Knox will attempt to regain control.
GO to Developer Options and select Wireless Debugging.
Now in your PC navigate to ADB/Platform Tools and launch CMD or Powershell by pressing Shift and right-click Open PowerShell here.
If using CMD type command as adb pair.
else in PowerShell type command as ".\adb pair".
Check this tutorial to connect the device to adb wirelssly.
Once you are connected to the device
enter
.\adb shell
pm disable-user --user 0 com.sec.enterprise.knox.cloudmdm.smdms
exit
vlcsnap-2021-12-27-23h55m09s659.png
Now enjoy your Bloatfree tablet.
You can change wallpaper add your own account and do everything as there will be no restrictions or Privacy invasion.
Note:- Updating or Resetting the device will roll back all the changes and you will have to repeat the procedure again
Thank you3
yes its very helpful & i thank u for that. with that guide of you and @AddictedA1 , i was able to break my first tab, now i'm just xploring other ways! this method is same as yours, but since device was opened for the first time and it havent enrolled not once with knox, we can enter home tab screen easily, so we can bypass the initial steps and go to the cmd step directly. it's the same output in end!21In my case I have done all the steps but at the end my USB debugging and wireless debugging both are greyed out and i not able to turn it on.Please help
New posts
-
-
-
Development [RECOVERY][UNOFFICIAL] PBRP for Galaxy A53 5G (exynos)- Latest: Clark Steven
-
General Nothing Phone (1) [ ROM ][ OTA ][ Nothing OS ] Repo of Nothing OS
- Latest: iamthechickengod
