[GUIDE] TWRP, ROOT and XPosed - Only J320FN !

Search This thread

adiJ5FN

Member
Jun 1, 2017
30
37
Warsaw
Preparation :
-First and the most important thing is unlock Bootloader,
-Then install Odin, - http://odindownload.com/Samsung-Odin/#.WUvlW-zyjcc (In this TUT I use Odin 3.09)
-And don't forget about USB drivers. - http://developer.samsung.com/galaxy/others/android-usb-driver-for-windows

1.How to install TWRP on this device :
-Download TWRP, - https://drive.google.com/file/d/0B974I_575_SMbHpfdVVkTlhEak0/view
-Run Odin,
-Click on AP and select TWRP,
-Turn off phone,
-Turn on phone holding Power button, Home button and Vol DOWN,
-You will see warning, You must click Vol UP,
-Now phone is in Download Mode,
-Connect phone to PC,
-Click Start in Odin,
-After few seconds TWRP will install.

2.How to ROOT this device :
-Download this ZIP, - https://drive.google.com/file/d/0B974I_575_SMMHZ6NjJKTVBXSDg/view
-Then copy it to the phone or SD card,
-Turn off device,
-And boot up phone holding Power Button, Home Button and Vol UP,
-Phone will boot up in TWRP,
-Now click install and choose ZIP from link,
-Again after few secs. device will be Rooted.

3.How to install XPosed framework on J320FN :
-First download XposedInstaller.apk, - https://drive.google.com/file/d/0B974I_575_SMWnZnbml1Z2JRWUU/view
-Second download XPosed.zip, - https://drive.google.com/file/d/0B974I_575_SMbnBjMDBUbjZxTUk/view
-After download, install XPosedInstaller.apk,
-Then boot up phone into TWRP,
-And again click on install and choose XPosed.zip,
-And again wait a few seconds,
-At the end reboot phone.

Congratulations ! You installed TWRP, ROOT and XPosed !
 
Last edited:

EMEK

Member
Apr 23, 2011
30
2
OEM mode enabled
Odin recognize device and put attached TWRP as a recorevery (TAR file given in AP section)
But, when i want to launch TWRP, i see stock recovery...
I root many galaxy devices in past, first time with this problem

Somebody can help?
 
  • Like
Reactions: jaaguar

mitchde

Senior Member
Apr 12, 2012
269
37
Did ODIN tells "PASS" in green after the twrp flash?
" Once the setting up of Odin is done as per your requirements, click Start and the flashing process will be started. Your device will start automatically after the process is finished, and a “Pass” notification on green background will be shown on the top left corner."
Perhaps not real flashed because some errors (check the text log for succeed 1 / failed 0 - means OK )?
 
Last edited:

cclaubscher

New member
Sep 3, 2017
1
0
Hi

i'm also getting the stock recovery screen. If you select "load from external storage" then at least i can see the SuperSU zip file to install. But installing that did not root the phone when i do a "root checker" test
 

Cian909

Member
Sep 25, 2017
7
0
How do i root samsung j3 lollipop 5.1.1 without pc and get twrp without pc. I tried with pc odin all the steps several times right and it didnt work pls reply asap
 

ldx63

Member
Feb 17, 2013
39
24
Brindisi
www.l-d-x.com
How do i root samsung j3 lollipop 5.1.1 without pc and get twrp without pc. I tried with pc odin all the steps several times right and it didnt work pls reply asap

I had the same problem with a J320FN. Solved by means of a factory reset before installing TWRP (EDIT: maybe factory reset wasn't the key for a successful flash of TWRP, but unflagging the "Auto reboot" option in Odin should be):

- enabled debug mode and oem unlock from developer settings
- (probably unnecessary) reboot in recovery mode (standard recovery), factory reset + cache clear
- switched off, then booted in download mode (VolDown + Home + Power)
- started ODIN on PC, loaded TWRP with "AP" button, unflagged "Auto reboot" option in Odin
- flashed TWRP
- switched off the device by pressing VolDown + Power for few seconds
- rebooted in recovery mode (VolUp + Home + Power), TWRP started
- flashed SuperSU

Hope this helps
Aldo
 
Last edited:

Asifahmad

Member
Sep 7, 2017
38
1
what version of twrp to install on my sm-j320f version?

---------- Post added at 01:57 PM ---------- Previous post was at 01:56 PM ----------

which twrp to install in my sm-j320f version?
 

the_ziom

Senior Member
Nov 8, 2012
194
14
Hello, I was wondering if supersu and xposed would still work if i flash stock recovery back?
 

Kaiyum

Senior Member
Sep 22, 2012
92
13
Redmi Note 9 Pro
Baah phone is stuck...

You can use the latest one 3.1 for j3lte and the 3.0.2-1 for the j3xnlte(FN)

---------- Post added at 11:32 PM ---------- Previous post was at 11:21 PM ----------

what version of twrp to install on my sm-j320f version?

---------- Post added at 01:57 PM ---------- Previous post was at 01:56 PM ----------

which twrp to install in my sm-j320f version?
Unsure if the F and the FN are the same but I'm using 3.0.2-1 on FN...
Hello, I was wondering if supersu and xposed would still work if i flash stock recovery back?
Root is now systemless and xposed is in the system files.. Most likely you would..
 
Last edited:

DanFL

New member
Nov 19, 2017
1
0
OEM mode enabled
Odin recognize device and put attached TWRP as a recorevery (TAR file given in AP section)
But, when i want to launch TWRP, i see stock recovery...
I root many galaxy devices in past, first time with this problem

Somebody can help?

Once you have done the installation of twrp, you can try using POWER,HOME and VOLUP (Instead of VOLDOWN). This could be the problem if you are pressing volume down it still brings you to the stock recovery.
 

moonlightzz

Member
Dec 2, 2017
11
2
I had the same problem with a J320FN. Solved by means of a factory reset before installing TWRP (EDIT: maybe factory reset wasn't the key for a successful flash of TWRP, but unflagging the "Auto reboot" option in Odin should be):

- enabled debug mode and oem unlock from developer settings
- (probably unnecessary) reboot in recovery mode (standard recovery), factory reset + cache clear
- switched off, then booted in download mode (VolDown + Home + Power)
- started ODIN on PC, loaded TWRP with "AP" button, unflagged "Auto reboot" option in Odin
- flashed TWRP
- switched off the device by pressing VolDown + Power for few seconds
- rebooted in recovery mode (VolUp + Home + Power), TWRP started
- flashed SuperSU

Hope this helps
Aldo

worked for me, i mean i had same issues like some of the posters but removing the auto reboot worked, vol+/home/power brings twrp ok.
 
  • Like
Reactions: dekishaaa and ldx63

Xmaster111

Member
Nov 8, 2016
45
4
xdaforums.com
I have this problem: link2sd does not work, the system does not allow link2sd to recognize the ext4 partition on start-up, I have to restart a second time.
I execute the guide for the root and the phone is ok.
Where is the problem?
 

Top Liked Posts

  • There are no posts matching your filters.
  • 10
    Preparation :
    -First and the most important thing is unlock Bootloader,
    -Then install Odin, - http://odindownload.com/Samsung-Odin/#.WUvlW-zyjcc (In this TUT I use Odin 3.09)
    -And don't forget about USB drivers. - http://developer.samsung.com/galaxy/others/android-usb-driver-for-windows

    1.How to install TWRP on this device :
    -Download TWRP, - https://drive.google.com/file/d/0B974I_575_SMbHpfdVVkTlhEak0/view
    -Run Odin,
    -Click on AP and select TWRP,
    -Turn off phone,
    -Turn on phone holding Power button, Home button and Vol DOWN,
    -You will see warning, You must click Vol UP,
    -Now phone is in Download Mode,
    -Connect phone to PC,
    -Click Start in Odin,
    -After few seconds TWRP will install.

    2.How to ROOT this device :
    -Download this ZIP, - https://drive.google.com/file/d/0B974I_575_SMMHZ6NjJKTVBXSDg/view
    -Then copy it to the phone or SD card,
    -Turn off device,
    -And boot up phone holding Power Button, Home Button and Vol UP,
    -Phone will boot up in TWRP,
    -Now click install and choose ZIP from link,
    -Again after few secs. device will be Rooted.

    3.How to install XPosed framework on J320FN :
    -First download XposedInstaller.apk, - https://drive.google.com/file/d/0B974I_575_SMWnZnbml1Z2JRWUU/view
    -Second download XPosed.zip, - https://drive.google.com/file/d/0B974I_575_SMbnBjMDBUbjZxTUk/view
    -After download, install XPosedInstaller.apk,
    -Then boot up phone into TWRP,
    -And again click on install and choose XPosed.zip,
    -And again wait a few seconds,
    -At the end reboot phone.

    Congratulations ! You installed TWRP, ROOT and XPosed !
    6
    How do i root samsung j3 lollipop 5.1.1 without pc and get twrp without pc. I tried with pc odin all the steps several times right and it didnt work pls reply asap

    I had the same problem with a J320FN. Solved by means of a factory reset before installing TWRP (EDIT: maybe factory reset wasn't the key for a successful flash of TWRP, but unflagging the "Auto reboot" option in Odin should be):

    - enabled debug mode and oem unlock from developer settings
    - (probably unnecessary) reboot in recovery mode (standard recovery), factory reset + cache clear
    - switched off, then booted in download mode (VolDown + Home + Power)
    - started ODIN on PC, loaded TWRP with "AP" button, unflagged "Auto reboot" option in Odin
    - flashed TWRP
    - switched off the device by pressing VolDown + Power for few seconds
    - rebooted in recovery mode (VolUp + Home + Power), TWRP started
    - flashed SuperSU

    Hope this helps
    Aldo
    2
    I had the same problem with a J320FN. Solved by means of a factory reset before installing TWRP (EDIT: maybe factory reset wasn't the key for a successful flash of TWRP, but unflagging the "Auto reboot" option in Odin should be):

    - enabled debug mode and oem unlock from developer settings
    - (probably unnecessary) reboot in recovery mode (standard recovery), factory reset + cache clear
    - switched off, then booted in download mode (VolDown + Home + Power)
    - started ODIN on PC, loaded TWRP with "AP" button, unflagged "Auto reboot" option in Odin
    - flashed TWRP
    - switched off the device by pressing VolDown + Power for few seconds
    - rebooted in recovery mode (VolUp + Home + Power), TWRP started
    - flashed SuperSU

    Hope this helps
    Aldo

    worked for me, i mean i had same issues like some of the posters but removing the auto reboot worked, vol+/home/power brings twrp ok.
    1
    OEM mode enabled
    Odin recognize device and put attached TWRP as a recorevery (TAR file given in AP section)
    But, when i want to launch TWRP, i see stock recovery...
    I root many galaxy devices in past, first time with this problem

    Somebody can help?
    1
    Here's a video a made about installing TWRP, rooting (both magisk and SuperSu can be used) and installing Xposed Framework (Custom 87.1 by wanam since im using stock rom). Is in spanish buy you can used it as a guide.

    - Install TWRP with Odin and then boot into recovery.
    - Root with SuperSU or Magisk 16 (recomended) and reboot.
    - Install Xposed by Wanam for ARM-SDK22 and reboot.
    - Install Xposed Installer (is an APK from Xposed official thread).
    - Download, install, enable modules, then restart. Done.

    Note: Gravity box WONT WORK and will give you bootloops in stock ROM, use Wanam Xposed for Samsung 5.x instead, it only has like 15% of the capabilities of gravity box but is the best we have for stock samsungs ROMs. Many modules wont work on samsung stock so read carefully before installing.