[Guide]-[TWRP]-[SuperSu]-How to Root P10 Lite

[aburezk]

Hello

/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed.
*/

This guide will show you how to install TWRP and SuperSU on your P10 Lite.
What we need to do?
*Installing ADB and Fastboot in your computer if you haven't*
*Unlock Bootloader*
*Flash TWRP*
*Flash SuperSU*

Installing ADB and Fastboot

https://xdaforums.com/showthread.php?t=2588979

Unlocking the Bootloader

Note: Unlocking bootloader will completely wipe your device’s data(Everything like music, photos, videos & apps).So it's recommended taking backup of your important data.
*Install HiSuite drivers are inluded*
http://consumer.huawei.com/minisite/HiSuite_en/index.html
*Now open the link below and sign in with your huawei ID and follow the Instructions until you get your 16-digt code*

https://hwid5.vmall.com/CAS/portal/loginAuth.html?lang=en-us&validated=true&themeName=red&service=http%3A%2F%2Femui.huawei.com%2Fen%2Fplugin%2Fhwlogin%2Fvalidate%3Fru%3Dhttp%253A%252F%252Femui.huawei.com%252Fen%252Fplugin%252Funlock%252Findex&loginChannel=22000000&reqClientType=2023

*Go to Developer Option and Enable OEM Unlock and USB Debugging
*Now plug your usb and open ADB and type*

adb reboot bootloader

Once you're in the bootloader type this

fastboot oem unlock your 16-digit code

Your Device will automatically factory-reset and reboot.

Now you have an Unlocked-Bootloader.

Installing TWRP:
Download(Thanks to Manuela.K):
https://mega.nz/#!tUJhmJiZ!ZgV9ZTPqNYG8XhRycVhT8FOBG0ffkUxIesf5V3abmqE
Connect your Phone and type this in ADB

adb devices

it will show the coonnected devices

adb reboot bootloader

When you're in fastboot mode type this

fastboot flash recovery (Drag the downloaded twrp)

Now type

fastboot reboot

When the phone starts

adb reboot recovery

Now you will boot into recovery

Installing SuperSu (ROOT!!):
*First Download SuperSu for EMUI 5 SuperSu is not officially supported yet*
https://xdaforums.com/p9/development/root-supersu-2-81-emui-5-t3612258
*choose 1a or 1b*
*Put it in SDcard and boot to TWRP by adb or by holding power+vol-up until huawei logo show up*
*In Twrp press install and select storage SDcard and select your supersu zip*
*Flash it*
*Reboot and check your root by root checker*

Link for getting unlock code is not working for me.
I get the unlock code from here:
emui.huawei.com/en/plugin/unlock/index
Another thing is the usb debugging mode need to switch on again after the reset.
Hope this will help.

​

 

[surdu_petru]

adb reboot bootloader

When you're in fastboot mode type this

fastboot flash recovery (Drag the downloaded twrp)

Now type

adb reboot

adb reboot bootloader

: the device enters to bootloader/fastboot mode

When you're in fastboot mode type this

fastboot flash recovery (Drag the downloaded twrp)

: flash a custom recovery

Now type

adb reboot

Wrong !

Wile device in bootloader mode, ONLY fastboot command are allowed !

Please send the right command : "adb reboot" -> "fastboot reboot"

Now type

fastboot reboot

Regards,​

 

[aburezk]

: the device enters to bootloader/fastboot mode

When you're in fastboot mode type this
: flash a custom recovery

Now type
Wrong !

Wile device in bootloader mode, ONLY fastboot command are allowed !

Please send the right command : "adb reboot" -> "fastboot reboot"

Now type



Regards,​

Sorry, thanks

 

[maxwelx64]

Hello

/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed.
*/

This guide will show you how to install TWRP and SuperSU on your P10 Lite.
What we need to do?
*Installing ADB and Fastboot in your computer if you haven't*
*Unlock Bootloader*
*Flash TWRP*
*Flash SuperSU*

Installing ADB and Fastboot

https://xdaforums.com/showthread.php?t=2588979

Unlocking the Bootloader

Note: Unlocking bootloader will completely wipe your device’s data(Everything like music, photos, videos & apps).So it's recommended taking backup of your important data.
*Install HiSuite drivers are inluded*
http://consumer.huawei.com/minisite/HiSuite_en/index.html
*Now open the link below and sign in with your huawei ID and follow the Instructions until you get your 16-digt code*

https://hwid5.vmall.com/CAS/portal/loginAuth.html?lang=en-us&validated=true&themeName=red&service=http%3A%2F%2Femui.huawei.com%2Fen%2Fplugin%2Fhwlogin%2Fvalidate%3Fru%3Dhttp%253A%252F%252Femui.huawei.com%252Fen%252Fplugin%252Funlock%252Findex&loginChannel=22000000&reqClientType=2023

*Go to Developer Option and Enable OEM Unlock and USB Debugging
*Now plug your usb and open ADB and type*


Once you're in the bootloader type this


Your Device will automatically factory-reset and reboot.

Now you have an Unlocked-Bootloader.

Installing TWRP:
Download(Thanks to Manuela.K):
https://mega.nz/#!tUJhmJiZ!ZgV9ZTPqNYG8XhRycVhT8FOBG0ffkUxIesf5V3abmqE
Connect your Phone and type this in ADB

it will show the coonnected devices

When you're in fastboot mode type this

Now type

When the phone starts

Now you will boot into recovery

Installing SuperSu (ROOT!!):
*First Download SuperSu for EMUI 5 SuperSu is not officially supported yet*
https://xdaforums.com/p9/development/root-supersu-2-81-emui-5-t3612258
*choose 1a or 1b*
*Put it in SDcard and boot to TWRP by adb or by holding power+vol-up until huawei logo show up*
*In Twrp press install and select storage SDcard and select your supersu zip*
*Flash it*
*Reboot and check your root by root checker*​

Link for getting unlock code is not working for me.
I get the unlock code from here:
emui.huawei.com/en/plugin/unlock/index
Another thing is the usb debugging mode need to switch on again after the reset.
Hope this will help.

 

[dejansabo]

Why is this thread here, we have P10 Lite forum?

 

[aburezk]

Why is this thread here, we have P10 Lite forum?

I created this before p10 lite forum was made

 

[SebiTheJOker]

TWRP problems

Hey man, i unlocked the bootloader and installed twrp. In the twrp install menu it shows me a bunch of numbers and letters being my internal storage. What can i do? I have huawei p10 lite

 

[aburezk]

Hey man, i unlocked the bootloader and installed twrp. In the twrp install menu it shows me a bunch of numbers and letters being my internal storage. What can i do? I have huawei p10 lite

That's because of encrypted files

 

[SebiTheJOker]

That's because of encrypted files

Can you explain me more about that? Is there something I can do to decrypt them? I have put the supersu file on internal storage and it shows encrypted. It s my first Huawei and I m newbie with it. Thank you very much

 

[aburezk]

Can you explain me more about that? Is there something I can do to decrypt them? I have put the supersu file on internal storage and it shows encrypted. It s my first Huawei and I m newbie with it. Thank you very much

You need an SDcard first put the Supersu.zip in the SDcard then you can install it

 

[SebiTheJOker]

You need an SDcard first put the Supersu.zip in the SDcard then you can install it

Thank you, it worked. Is there any way to flash stock firmware again? Before i flashed supersu i tried using dload folder with update.app and it didn't worked. (was-LX1 europe)

 

[aburezk]

Thank you, it worked. Is there any way to flash stock firmware again? Before i flashed supersu i tried using dload folder with update.app and it didn't worked. (was-LX1 europe)

I haven't tried flashing any stock updates

 

[simo1994]

That's because of encrypted files

Hey man, i unlocked the bootloader and installed twrp. In the twrp install menu it shows me a bunch of numbers and letters being my internal storage. What can i do? I have huawei p10 lite

i got the same problem, i also have an external sd card but the phone didn't detect it, what can i do to resolve this issue?

 

[aburezk]

i got the same problem, i also have an external sd card but the phone didn't detect it, what can i do to resolve this issue?

You need to install .zip from SD Card

Try this TWRP
https://xdaforums.com/android/development/beta-t3619496

 

[simo1994]

You need to install .zip from SD Card

Try this TWRP
https://xdaforums.com/android/development/beta-t3619496

it says version 3.1.1-0 but when i install it says 3.1.1-2 that i already installed before...

and files are still encrypted and i don't find the zip

 

[aburezk]

it says version 3.1.1-0 but when i install it says 3.1.1-2 that i already installed before...

and files are still encrypted and i don't find the zip

Backup your apps and data in Huawei backup
Flash this zip
https://build.nethunter.com/android-tools/no-verity-opt-encrypt/
Wipe data in twrp which will remove encryption

 

[simo1994]

Backup your apps and data in Huawei backup
Flash this zip
https://build.nethunter.com/android-tools/no-verity-opt-encrypt/
Wipe data in twrp which will remove encryption

i've solved using another method, i've installed the zip file via ADB sideload

 

[Heavyputr3]

Hi. I have done all the steps and now i have twrp installed, but when supersu is installed my p10 lite wont work with headphones. This happens exclusively after installing supersu, after remove root my phone went normal :/ any ideas? I need root acces to install viper4android (sorry for my bad english) thanks

 

[pika83]

Hello, excuse my English but not very comfortable on it.
To the page "emui.huawei.com/en/plugin/unlock/detail" I fill in the information in order to apply for the unlock password, knowing that I have a "P10 Lite Mod: WAS-L1" Tab "PRODUCT IMEI or MEID" I register my imei, but apparently I have two imei. I have to try several combinations (ex: xxxxx / xxxxx) and it puts me "IMEI must be composed of decimal numbers (0 ~ 9) or letters (a ~ z or A ~ Z)." How should I register these IMEIs to validate my application?
Thanks in advance.

 

[Hipom]

Hello, excuse my English but not very comfortable on it.
To the page "emui.huawei.com/en/plugin/unlock/detail" I fill in the information in order to apply for the unlock password, knowing that I have a "P10 Lite Mod: WAS-L1" Tab "PRODUCT IMEI or MEID" I register my imei, but apparently I have two imei. I have to try several combinations (ex: xxxxx / xxxxx) and it puts me "IMEI must be composed of decimal numbers (0 ~ 9) or letters (a ~ z or A ~ Z)." How should I register these IMEIs to validate my application?
Thanks in advance.

Just put one imei.the first or the second..