[GUIDE] UNBRICK/DOWNGRADE YOUR REALME 6/6I(INDIA)/6S USING SPFLASH TOOL FOR FREE!

Search This thread

Kodize

Member
Nov 28, 2018
40
5
Saltillo
My realme 6 was bricked in realme ui 2.0, I did this process and I am left with realme ui 1.0, is there any way to update to realme ui 2.0 again, since the ota update does not come out
 

Kodize

Member
Nov 28, 2018
40
5
Saltillo
Hello everyone, I have a good internet and some knowledge in roms/kernels, and I would like to help the community by uploading the latest edl update (c16) for realme 6 global, I was looking at the decrypter but it only works with .ops formats and in my zip it is only like this

1642699438395.png
 

Aviator_

Member
Jan 9, 2022
9
0
Hello.
Congratulations on your guide!
It's very useful.
After installing the MTK drivers (cdc-acm.inf), I encountered a problem installing the libusb-win32-devel-filter-1.2.6.0.exe program.
While installing the filter I connected my smartphone (turned off) to the PC by holding down the "Volume +" and "Volume -" buttons.
My pc did not detect "MediaTek USB Port", but a "Human Interface Device".
Where did I go wrong?
Thanks, my friend.
 

tee_pot

Senior Member
Jan 7, 2014
107
23
Brighton
Just fixed my mate's boot-looping phone with this guide and downloads - thank you for an easy to follow guide! (Apart from a coupla pics being in the wrong place 😁)

Thanks again @daeSundae 😍

Tee
 

Adhii23

New member
Aug 27, 2021
2
0
Hello everyone! So after the new mediatek DAA and SLA protection bypasses you can find github repo of here , using the bypass we are able to use SPFlash Tool, here is a guide how you can do it! This guide is for RMX2001, RMX2002 and RMX2003 ONLY. DON'T DO ANY OF THESE IF YOU HAVE SOMETHING ELSE!

PLEASE SEE "TROUBLESHOOTING" AT THE END OF THE GUIDE FIRST IF YOU HAVE PROBLEMS IN THE PROCESS BEFORE ASKING!


ALWAYS USE DOWNLOAD ONLY MODE OF SP FLASH TOOL.
DON'T TOUCH ANYTHING RELATED TO FORMAT ON SP FLASH TOOL! (IT'S WRITTEN EVERYWHERE, YOU WILL LOSE YOUR IMEIS IF YOU USE FORMAT ALL + DOWNLOAD. YOU ARE SAFE IF YOU USE DOWNLOAD ONLY.)


VIDEO GUIDES



FOR LINUX METHOD CLICK HERE - Credits to @bx2_nero

Windows Method

Requirements:
Bypass Tools Pack - (SPFLASH TOOL, DRIVER AND BYPASS FILES)

Decrypted OFP (OPPO FIRMWARE PACKAGE) Files:

FULL FIRMWARE - INCLUDES THE "USERDATA" PARTITION, HENCE LARGER.
B.53 - Mega - Google Drive - Mirror3
B.37 - Mega - Google Drive 2
B.23 (First RUI Update for the device) - Mega - Google Drive - Mirror3
A.50[EU] - Mega - Google Drive
A.42[EU] - Google Drive - Mirror2


NOU (NO USERDATA) FIRMWARE - FOR PEOPLE WITH LIMITED DATA PLAN.
B.53 - Google Drive - Mirror 2
B.37 - Google Drive - Mirror 2
B.23 - Google Drive - Mirror 2
A.50[EU] - Mega - Google Drive
A.42[EU] - Google Drive - Mirror2

Please read an explanation of what is userdata partition and how different is this from other firmware here.
Note: All files with available links above are tested.

Python (Must add to PATH during installation, see screenshot if you don't understand)
libusb-win32 - Having Issues? Use this.

aaf0ca5590e6884c234b1.png

Make sure to choose the last option.
1)Open command prompt by running cmd,
enter
python -m pip install pyusb pyserial json5
View attachment 5195739
After the installation, you can re-run the command. If it looks like the screenshot above you're ready to go to next step.

after the installation leave CMD.
2) Go to driver folder, find the .inf file right click and press install.
View attachment 5195737
3)Download this file and install it, after installing plug your phone to PC by connecting your phone to PC while doing Vol+- . You might need this driver as well if it's not detected.

3a6d351fec8ab9961a5e3.png

Press next, connect your device to PC while holding Vol+- buttons (your device needs to be powered off) and you will see the mtkdriver down below. Install it.
310b8508659201f6729f7.png

Choose MediaTek USB Port and install it.
4)Turn off your phone and again connect to PC while holding Vol+- buttons then run the brom.bat under Bypass folder. If it says "Protection Disabled" in the end you're ready to go on. (If it's like the screenshot below go on.)
View attachment 5196231
If you had a problem here, please check the end of the guide for it's fix.

5)Go into Flash Tool folder and open the SPFlash tool, after that choose scatter file and also if not set, set your download -agent. You don't need to select auth file as authorization is disabled. Once you do it, it should look like this. ALWAYS MAKE SURE DOWNLOAD ONLY MODE IS SELECTED! DON'T SELECT OTHER MODES!

View attachment 5202549
Click choose DA Agent. (I uploaded an updated bypass tools pack, if you're using older download new one) Go into Bypass Tools Pack > Verified Boot Fix > Choose the "DA_6765_6785_6768_6873_6885_6853.bin" file.

If its giving error go into Options menu and disable option shown below. You will be able to choose a DA file.
View attachment 5202533

73cff8e3aa78249f2d298.png

Make SURE "Download Only" is selected. Don't select ANYTHING ELSE! You will lose your IMEIs, Serial Numbers, Capability of Hardware Attestation etc. if you choose "Format data + Download" make SURE you selected "Download Only".
1f97e3897519622afb94d.png


After flashing it should look like this. Download has been complete. Enjoy!

Now, you can start downloading with the button and after that a checkmark will appear. You can reboot your phone and use it like before now! All your userdata will (inevitably) be cleared!

POSSIBLE ERROR: "Verified boot enabled."
View attachment 5197259

There are 2 fixes to this.
1st Method (DIRECT FIX):
View attachment 5202549
Click choose DA Agent. (I uploaded an updated bypass tools pack, if you're using older download new one) Go into Bypass Tools Pack > Verified Boot Fix > Choose the "DA_6765_6785_6768_6873_6885_6853.bin" file.

If its giving error go into Options menu and disable option shown below. You will be able to choose a DA file.
View attachment 5202533

2nd Method (WORKAROUND):
If you're getting this error, and you are SURE you used "Download Only" mode, there's a way to get rid of this. First, load the scatter then untick/deselect partitions listed below.

opporeserve2,
cdt_engineering,
my_custom,
special_preload,
userdata,
super,

After running brom.bat and flashing all partitions except the ones listed above, your phone will be able to reboot to stock recovery. Now select " Power Off" option then go run brom.bat, bypass authorization and then flash partitions listed below from SPFlash Tool.

super,
dtbo,
userdata

Your device will be able to boot into system after this if you have followed steps correctly.

POSSIBLE ERROR: Issues while disabling protection;


View attachment 5196241
Power off your device Restart the process from 2nd step.

POSSIBLE ERROR: Issues while flashing;
View attachment 5196249

Power off your device, you will need to do the bypass again. Check your USB Cable, there might be a disconnection. If not, start from 3rd step and make sure you did everything right.

So, welcome to hell(!).

For people who want to downgrade:
If you want to downgrade to any version you would like, just use the B23 file as it is the oldest ofp file i could find for extracting process. If you were on EU version before (Any version starting with A) download ozip from here(for EU) , here(for Global) and manually flash from Realme UI recovery and format your data. Your device will be back at A.XY firmware with EU features (No heytap, no ads, no theme store, no bloatware) you had before.

For people on EU who want to unbrick:
So, you can use any version starting with B and it should work. It works in my case, i was on A.48, i flashed B53 and over that flashed B23. No probs at all. If you want to return to EU rom (starting with A) download ozip from here and manually flash from Realme UI recovery and format your data. Your device will be back at A.XY firmware with EU features (No heytap, no ads, no theme store, no bloatware) you had before.

Thanks --
https://github.com/bkerler/oppo_decrypt for decryptor.
https://github.com/MTK-bypass for creating the tool.
sir i have a problem here. yesterday, i want to install custom recovery and i flash boot_root.img and i got stucked at logo realme with android logo and there is an inscription on the left it say "orange state" and i can't boot to fastboot mode/recovery mode. it stuck at that logo. can anyone help me plis, im newbie at this :(
 

Ozycer

Member
Apr 2, 2018
15
0
Got this error on Brom


[2022-05-01 16:35:03.331505] Waiting for bootrom
[2022-05-01 16:35:40.296874] Found port = COM3

[2022-05-01 16:35:40.302874] Device hw code: 0x813
[2022-05-01 16:35:40.303874] Device hw sub code: 0x8a00
[2022-05-01 16:35:40.303874] Device hw version: 0xca00
[2022-05-01 16:35:40.304875] Device sw version: 0x0
[2022-05-01 16:35:40.304875] Device secure boot: True
[2022-05-01 16:35:40.304875] Device serial link authorization: False
[2022-05-01 16:35:40.305875] Device download agent authorization: True

[2022-05-01 16:35:40.305875] Disabling watchdog timer
[2022-05-01 16:35:40.306875] Disabling protection
Traceback (most recent call last):
File "C:\Users\ASUS\Desktop\ced\Downloads\Bypass Tools Pack\Bypass Tools Pack\Bypass\main.py", line 65, in <module>
main()
File "C:\Users\ASUS\Desktop\ced\Downloads\Bypass Tools Pack\Bypass Tools Pack\Bypass\main.py", line 60, in main
exploit(device, watchdog_address, var_0, var_1, arguments.payload)
File "C:\Users\ASUS\Desktop\ced\Downloads\Bypass Tools Pack\Bypass Tools Pack\Bypass\src\exploit.py", line 35, in exploit
udev._ctx.managed_claim_interface = lambda *args, **kwargs: None
AttributeError: 'NoneType' object has no attribute '_ctx'


any fix?
 

gaduaxe

Senior Member
Jul 20, 2013
103
7
Hi I have Realme 6 Pro with QC chipset (not MTK chipset)

Is there anyone know the Guide for hardbrick? I re-locked bootloader then stuck in boot loop
 

Kirk99

New member
Jul 5, 2022
1
0
Spotify does make it simple for people to enjoy music. Activate the Spotify app on your Android device by pulling it out. The most vibrant music collection in the entire world will then be in your possession. You must purchase a Premium plan to enjoy such convenience and pleasure, though. Since you can download songs to your phone for offline listening, you might argue that it's worthwhile. If you don't want to pay for Premium, I'll share with you a quick method for downloading Spotify music to your Android phone as MP3 files.
 

gaduaxe

Senior Member
Jul 20, 2013
103
7
Hello everyone! So after the new mediatek DAA and SLA protection bypasses you can find github repo of here , using the bypass we are able to use SPFlash Tool, here is a guide how you can do it! This guide is for RMX2001, RMX2002 and RMX2003 ONLY. DON'T DO ANY OF THESE IF YOU HAVE SOMETHING ELSE!
Hi @daeSundae

Is there solution for Qualcomn chipset model?
 

KBG_01

New member
Jul 5, 2022
2
0
Hello everyone! So after the new mediatek DAA and SLA protection bypasses you can find github repo of here , using the bypass we are able to use SPFlash Tool, here is a guide how you can do it! This guide is for RMX2001, RMX2002 and RMX2003 ONLY. DON'T DO ANY OF THESE IF YOU HAVE SOMETHING ELSE!

PLEASE SEE "TROUBLESHOOTING" AT THE END OF THE GUIDE FIRST IF YOU HAVE PROBLEMS IN THE PROCESS BEFORE ASKING!


ALWAYS USE DOWNLOAD ONLY MODE OF SP FLASH TOOL.
DON'T TOUCH ANYTHING RELATED TO FORMAT ON SP FLASH TOOL! (IT'S WRITTEN EVERYWHERE, YOU WILL LOSE YOUR IMEIS IF YOU USE FORMAT ALL + DOWNLOAD. YOU ARE SAFE IF YOU USE DOWNLOAD ONLY.)


VIDEO GUIDES



FOR LINUX METHOD CLICK HERE - Credits to @bx2_nero

Windows Method

Requirements:
Bypass Tools Pack - (SPFLASH TOOL, DRIVER AND BYPASS FILES)

Decrypted OFP (OPPO FIRMWARE PACKAGE) Files:

FULL FIRMWARE - INCLUDES THE "USERDATA" PARTITION, HENCE LARGER.
B.53 - Mega - Google Drive - Mirror3
B.37 - Mega - Google Drive 2
B.23 (First RUI Update for the device) - Mega - Google Drive - Mirror3
A.50[EU] - Mega - Google Drive
A.42[EU] - Google Drive - Mirror2


NOU (NO USERDATA) FIRMWARE - FOR PEOPLE WITH LIMITED DATA PLAN.
B.53 - Google Drive - Mirror 2
B.37 - Google Drive - Mirror 2
B.23 - Google Drive - Mirror 2
A.50[EU] - Mega - Google Drive
A.42[EU] - Google Drive - Mirror2

Please read an explanation of what is userdata partition and how different is this from other firmware here.
Note: All files with available links above are tested.

Python (Must add to PATH during installation, see screenshot if you don't understand)
libusb-win32 - Having Issues? Use this.

aaf0ca5590e6884c234b1.png

Make sure to choose the last option.
1)Open command prompt by running cmd,
enter
python -m pip install pyusb pyserial json5
View attachment 5195739
After the installation, you can re-run the command. If it looks like the screenshot above you're ready to go to next step.

after the installation leave CMD.
2) Go to driver folder, find the .inf file right click and press install.
View attachment 5195737
3)Download this file and install it, after installing plug your phone to PC by connecting your phone to PC while doing Vol+- . You might need this driver as well if it's not detected.

3a6d351fec8ab9961a5e3.png

Press next, connect your device to PC while holding Vol+- buttons (your device needs to be powered off) and you will see the mtkdriver down below. Install it.
310b8508659201f6729f7.png

Choose MediaTek USB Port and install it.
4)Turn off your phone and again connect to PC while holding Vol+- buttons then run the brom.bat under Bypass folder. If it says "Protection Disabled" in the end you're ready to go on. (If it's like the screenshot below go on.)
View attachment 5196231
If you had a problem here, please check the end of the guide for it's fix.

5)Go into Flash Tool folder and open the SPFlash tool, after that choose scatter file and also if not set, set your download -agent. You don't need to select auth file as authorization is disabled. Once you do it, it should look like this. ALWAYS MAKE SURE DOWNLOAD ONLY MODE IS SELECTED! DON'T SELECT OTHER MODES!

View attachment 5202549
Click choose DA Agent. (I uploaded an updated bypass tools pack, if you're using older download new one) Go into Bypass Tools Pack > Verified Boot Fix > Choose the "DA_6765_6785_6768_6873_6885_6853.bin" file.

If its giving error go into Options menu and disable option shown below. You will be able to choose a DA file.
View attachment 5202533

73cff8e3aa78249f2d298.png

Make SURE "Download Only" is selected. Don't select ANYTHING ELSE! You will lose your IMEIs, Serial Numbers, Capability of Hardware Attestation etc. if you choose "Format data + Download" make SURE you selected "Download Only".
1f97e3897519622afb94d.png


After flashing it should look like this. Download has been complete. Enjoy!

Now, you can start downloading with the button and after that a checkmark will appear. You can reboot your phone and use it like before now! All your userdata will (inevitably) be cleared!

POSSIBLE ERROR: "Verified boot enabled."
View attachment 5197259

There are 2 fixes to this.
1st Method (DIRECT FIX):
View attachment 5202549
Click choose DA Agent. (I uploaded an updated bypass tools pack, if you're using older download new one) Go into Bypass Tools Pack > Verified Boot Fix > Choose the "DA_6765_6785_6768_6873_6885_6853.bin" file.

If its giving error go into Options menu and disable option shown below. You will be able to choose a DA file.
View attachment 5202533

2nd Method (WORKAROUND):
If you're getting this error, and you are SURE you used "Download Only" mode, there's a way to get rid of this. First, load the scatter then untick/deselect partitions listed below.

opporeserve2,
cdt_engineering,
my_custom,
special_preload,
userdata,
super,

After running brom.bat and flashing all partitions except the ones listed above, your phone will be able to reboot to stock recovery. Now select " Power Off" option then go run brom.bat, bypass authorization and then flash partitions listed below from SPFlash Tool.

super,
dtbo,
userdata

Your device will be able to boot into system after this if you have followed steps correctly.

POSSIBLE ERROR: Issues while disabling protection;


View attachment 5196241
Power off your device Restart the process from 2nd step.

POSSIBLE ERROR: Issues while flashing;
View attachment 5196249

Power off your device, you will need to do the bypass again. Check your USB Cable, there might be a disconnection. If not, start from 3rd step and make sure you did everything right.

So, welcome to hell(!).

For people who want to downgrade:
If you want to downgrade to any version you would like, just use the B23 file as it is the oldest ofp file i could find for extracting process. If you were on EU version before (Any version starting with A) download ozip from here(for EU) , here(for Global) and manually flash from Realme UI recovery and format your data. Your device will be back at A.XY firmware with EU features (No heytap, no ads, no theme store, no bloatware) you had before.

For people on EU who want to unbrick:
So, you can use any version starting with B and it should work. It works in my case, i was on A.48, i flashed B53 and over that flashed B23. No probs at all. If you want to return to EU rom (starting with A) download ozip from here and manually flash from Realme UI recovery and format your data. Your device will be back at A.XY firmware with EU features (No heytap, no ads, no theme store, no bloatware) you had before.

Thanks --
https://github.com/bkerler/oppo_decrypt for decryptor.
https://github.com/MTK-bypass for creating the tool.
Can't find 0x1066 hw_code in config i am getting this error
 

Ferbir88

Member
Jan 24, 2016
10
0
Realme 6s

Top Liked Posts

  • There are no posts matching your filters.
  • 15
    Hello everyone! So after the new mediatek DAA and SLA protection bypasses you can find github repo of here , using the bypass we are able to use SPFlash Tool, here is a guide how you can do it! This guide is for RMX2001, RMX2002 and RMX2003 ONLY. DON'T DO ANY OF THESE IF YOU HAVE SOMETHING ELSE!

    PLEASE SEE "TROUBLESHOOTING" AT THE END OF THE GUIDE FIRST IF YOU HAVE PROBLEMS IN THE PROCESS BEFORE ASKING!


    ALWAYS USE DOWNLOAD ONLY MODE OF SP FLASH TOOL.
    DON'T TOUCH ANYTHING RELATED TO FORMAT ON SP FLASH TOOL! (IT'S WRITTEN EVERYWHERE, YOU WILL LOSE YOUR IMEIS IF YOU USE FORMAT ALL + DOWNLOAD. YOU ARE SAFE IF YOU USE DOWNLOAD ONLY.)


    VIDEO GUIDES



    FOR LINUX METHOD CLICK HERE - Credits to @bx2_nero

    Windows Method

    Requirements:
    Bypass Tools Pack - (SPFLASH TOOL, DRIVER AND BYPASS FILES)

    Decrypted OFP (OPPO FIRMWARE PACKAGE) Files:

    FULL FIRMWARE - INCLUDES THE "USERDATA" PARTITION, HENCE LARGER.
    B.53 - Mega - Google Drive - Mirror3
    B.37 - Mega - Google Drive 2
    B.23 (First RUI Update for the device) - Mega - Google Drive - Mirror3
    A.50[EU] - Mega - Google Drive
    A.42[EU] - Google Drive - Mirror2


    NOU (NO USERDATA) FIRMWARE - FOR PEOPLE WITH LIMITED DATA PLAN.
    B.53 - Google Drive - Mirror 2
    B.37 - Google Drive - Mirror 2
    B.23 - Google Drive - Mirror 2
    A.50[EU] - Mega - Google Drive
    A.42[EU] - Google Drive - Mirror2

    Please read an explanation of what is userdata partition and how different is this from other firmware here.
    Note: All files with available links above are tested.

    Python (Must add to PATH during installation, see screenshot if you don't understand)
    libusb-win32 - Having Issues? Use this.

    aaf0ca5590e6884c234b1.png

    Make sure to choose the last option.
    1)Open command prompt by running cmd,
    enter
    python -m pip install pyusb pyserial json5
    1611352854113.png

    After the installation, you can re-run the command. If it looks like the screenshot above you're ready to go to next step.

    after the installation leave CMD.
    2) Go to driver folder, find the .inf file right click and press install.
    1611352830350.png

    3)Download this file and install it, after installing plug your phone to PC by connecting your phone to PC while doing Vol+- . You might need this driver as well if it's not detected.

    3a6d351fec8ab9961a5e3.png

    Press next, connect your device to PC while holding Vol+- buttons (your device needs to be powered off) and you will see the mtkdriver down below. Install it.
    310b8508659201f6729f7.png

    Choose MediaTek USB Port and install it.
    4)Turn off your phone and again connect to PC while holding Vol+- buttons then run the brom.bat under Bypass folder. If it says "Protection Disabled" in the end you're ready to go on. (If it's like the screenshot below go on.)
    1611391901952.png

    If you had a problem here, please check the end of the guide for it's fix.

    5)Go into Flash Tool folder and open the SPFlash tool, after that choose scatter file and also if not set, set your download -agent. You don't need to select auth file as authorization is disabled. Once you do it, it should look like this. ALWAYS MAKE SURE DOWNLOAD ONLY MODE IS SELECTED! DON'T SELECT OTHER MODES!

    1611929163628.png

    Click choose DA Agent. (I uploaded an updated bypass tools pack, if you're using older download new one) Go into Bypass Tools Pack > Verified Boot Fix > Choose the "DA_6765_6785_6768_6873_6885_6853.bin" file.

    If its giving error go into Options menu and disable option shown below. You will be able to choose a DA file.
    1611928718706.png


    73cff8e3aa78249f2d298.png

    Make SURE "Download Only" is selected. Don't select ANYTHING ELSE! You will lose your IMEIs, Serial Numbers, Capability of Hardware Attestation etc. if you choose "Format data + Download" make SURE you selected "Download Only".
    1f97e3897519622afb94d.png


    After flashing it should look like this. Download has been complete. Enjoy!

    Now, you can start downloading with the button and after that a checkmark will appear. You can reboot your phone and use it like before now! All your userdata will (inevitably) be cleared!

    POSSIBLE ERROR: "Verified boot enabled."
    1611478791612.png


    There are 2 fixes to this.
    1st Method (DIRECT FIX):
    1611929163628.png

    Click choose DA Agent. (I uploaded an updated bypass tools pack, if you're using older download new one) Go into Bypass Tools Pack > Verified Boot Fix > Choose the "DA_6765_6785_6768_6873_6885_6853.bin" file.

    If its giving error go into Options menu and disable option shown below. You will be able to choose a DA file.
    1611928718706.png


    2nd Method (WORKAROUND):
    If you're getting this error, and you are SURE you used "Download Only" mode, there's a way to get rid of this. First, load the scatter then untick/deselect partitions listed below.

    opporeserve2,
    cdt_engineering,
    my_custom,
    special_preload,
    userdata,
    super,

    After running brom.bat and flashing all partitions except the ones listed above, your phone will be able to reboot to stock recovery. Now select " Power Off" option then go run brom.bat, bypass authorization and then flash partitions listed below from SPFlash Tool.

    super,
    dtbo,
    userdata

    Your device will be able to boot into system after this if you have followed steps correctly.

    POSSIBLE ERROR: Issues while disabling protection;


    1611392223180.png

    Power off your device Restart the process from 2nd step.

    POSSIBLE ERROR: Issues while flashing;
    1611392834527.png


    Power off your device, you will need to do the bypass again. Check your USB Cable, there might be a disconnection. If not, start from 3rd step and make sure you did everything right.

    So, welcome to hell(!).

    For people who want to downgrade:
    If you want to downgrade to any version you would like, just use the B23 file as it is the oldest ofp file i could find for extracting process. If you were on EU version before (Any version starting with A) download ozip from here(for EU) , here(for Global) and manually flash from Realme UI recovery and format your data. Your device will be back at A.XY firmware with EU features (No heytap, no ads, no theme store, no bloatware) you had before.

    For people on EU who want to unbrick:
    So, you can use any version starting with B and it should work. It works in my case, i was on A.48, i flashed B53 and over that flashed B23. No probs at all. If you want to return to EU rom (starting with A) download ozip from here and manually flash from Realme UI recovery and format your data. Your device will be back at A.XY firmware with EU features (No heytap, no ads, no theme store, no bloatware) you had before.

    Thanks --
    https://github.com/bkerler/oppo_decrypt for decryptor.
    https://github.com/MTK-bypass for creating the tool.
    2
    I just unbricked mine (realme 6) with a Red State warning error.

    •Download Mediatek Bypass Tool by MCT TEAM.
    • set Target SOC to [AUTO] then tap BYPASS.
    •while device is in bootloop (press Vol+ and Vol- then Power at the same time.) if screen is off just press and hold Vol+ and Vol- until you see the protection is off.
    ———
    •Open SPFTool.
    •load this = “DA_6765_6785_6768_6873_6885_6853.bin” and the usual scatter_file.txt.
    •now Press “Download”.
    If done correctly the program should continue until done without any error like verified boot etc.
    Files are included.
    I hope this helps. :D
    716F78B2-B03B-421C-9881-C6FDEECC1E11.jpeg
    2
    It is firmware for the device you mentioned, RMX2040, hence, yes.
    OMG, thank you very much. without your help and tutorial I can't bring my phone back from the dead. God bless Mabuhay
    2
    bro can we use this method to revert back from latest b59 firmware in realme 6
    Yes obviously !
    1
    Thank you for your efforts. Can you add the decrypted A34 file?
    Hello! I wasn't able to find factory package (ofp) files for any version that makes sense for versions starting with A. (EU). There are A11 and A08 which according to update trackers, did never exist and the A.11 package is %50 larger than all the other files weirdly. I have contacted owner of some sites that do upload files like these and they asked for money. If it's a resonable price i will get it, decrypt it and upload here! If you were able to find any versions starting with A, feel free to message me on telegram (@ctivity) or email me!