[GUIDE]Unbrick honor6X. (No boot. No fastboot. No Recovery. No bootloader code)

[mohsin.kadiwala]

I need help my phone model and build number shows that..I have to flash oeminfo by fastboot..???

Anyone plzz help me...??

 

[player615]

Anyone plzz help me...??

Flash userdata.img and cust and vendor

 

[mohsin.kadiwala]

Flash userdata.img and cust and vendor

From update.app with fastboot commonds??

 

[mohsin.kadiwala]

From update.app with fastboot commonds??

???

 

[m_salah 2009]

I followed the steps successfully until the last one :
(the last thing to do is update your firmware with eRecovery or by dload method (launching software upgrade app)
1st of all there's no eRecovery mode available with this factory mode system (it boot into recovery mood) , so I only have to do the dload method
but it's also not working ... I use one of the oeminfo in your files (which is the same as my mobile : BLL-L22C636) and I tried to install both Android 7 (B361) and 6 (B150) and they both failed , it reaches 5% and says please insert otg/sd card or check app files in 2 mins) , I tried to flash the update.app contents by fastboot but when flashing system.img it says : sending sparse system failed
so what do you think I should do ???
which oem file should I use and which firmware version ???

 

[m_salah 2009]

I followed the steps successfully until the last one :
(the last thing to do is update your firmware with eRecovery or by dload method (launching software upgrade app)
1st of all there's no eRecovery mode available with this factory mode system (it boot into recovery mood) , so I only have to do the dload method
but it's also not working ... I use one of the oeminfo in your files (which is the same as my mobile : BLL-L22C636) and I tried to install both Android 7 (B361) and 6 (B150) and they both failed , it reaches 5% and says please insert otg/sd card or check app files in 2 mins) , I tried to flash the update.app contents by fastboot but when flashing system.img it says : sending sparse system failed
so what do you think I should do ???
which oem file should I use and which firmware version ???

by the way , In About phone in settings , that phone storage is only 4 GB and RAM is only 1GB and resolution is only 540x960
so I think this is why I flash my normal Update.APP it's not accepted cuz it gives values different from the installled system

* I also tried to install twrp , it failed

 

[m_salah 2009]

by the way , In About phone in settings , that phone storage is only 4 GB and RAM is only 1GB and resolution is only 540x960
so I think this is why I flash my normal Update.APP it's not accepted cuz it gives values different from the installled system

* I also tried to install twrp , it failed

This is what happens when I try to flash system.img

and after I reboot the fastboot , the mobile starts the bootloop

 

[Poine45]

This is what happens when I try to flash system.img

and after I reboot the fastboot , the mobile starts the bootloop

After the third step from this guide (play on idt), dont flash anything, reboot and check your oem and emui version (on phone or huawei multi-tool).
Unlock your bootloader (if it's not), install TWRP (the good one) and flash the good rom (corresponding the oem you saw, not the oem you want).
After you may debrand/rebrand in another version.
My phone was in BLL-L22 after this guide (he is BLN-L21 initially). So i flashed a BLL-L22 rom and it works.
Sorry for my bad english.

 

[ppawan]

in fastbootimage folders are missing as sec_boot or sec_recovery and many more that's why it does not start and that's why I can not enter eRecovery is real since I downloaded it several times and there are always missing folders

hey i have the same problem how to deal with that ?

 

[ppawan]

hey i have the same problem how to deal with that ?

hey my honor 6x i've selected the testpoint however it is not detected in pc, i tried installing the windows drivers using test mode by disabiling the security as well.

 

[alijowkar]

fastboot flash system SYSTEM.img
target reported max download size of 471859200 bytes
sending sparse 'system' (460818 KB)...
OKAY [ 12.193s]
writing 'system'...
FAILED (remote: sparse flash write failure)
finished. total time: 12.227s
hi i cant flash system.img what should i do?

 

[htceruno]

THAAAAAAAAAAAAAAAAAAAAAAAAAAANK YOOOOOOOOOOUUUUUUUUUUUUUUUUUUUUUUUUUUUUUU:cyclops::crying::good::fingers-crossed::laugh::silly:

NOTE:

this method is only for Honor6X and GR5-2017 Devices.

I am not responsable for any other damage:
**losing serial number,imei, or any other problem.**
this one will force to unlock bootloader code and FRP,and all your data will be erased.
it will help you to debrand to other regions easily.

************************************************************
you need at first this files:
-HL2BLNTMBD001051*
-HONOROEMINFO
-DRIVER HANDSET*
-IMAGE DOWNLOADER*

----------------------

1-Preparing files:
-exrtract all files below
-then install driver :

-once installed open IDT and follow the steps :

-then browse in folder HL2BLNTMBD001051 and select :

----------------------
2-In the side of the phone :
-you have to open your phone to work on the motherboard :

-you need an object to touch the testpoints of the motherboard (Everything who's metallic can serve you)

-make sur that you press testpoints, then hold and put usb cable in the same time:

-[if phone turn on, turn it off and make sur that you contact between testpoints]

-you will see in the computer Your device is detected as(Huawei USB COM1.0)
if not, reinstall driver and reboot the computer.

----------------------
3-Runnig the work :
-now click on (play) button in IDT. [ you will see that the progression has started].
-once progression finished,go to the next step(4)
-if it fail..don't panic.
just flash SYSTEM.img manually with fastboot (system.img he is in fastbootimage folder).
----------------------
4-finishing:
-now your phone start working as factory mode,
reboot fastboot and flash any oeminfo file given or of your choice.

-once again done.
the last thing to do is update your firmware with eRecovery or by dload method (launching software upgrade app)
----------------------
Done :good: say thanks

 

[htceruno]

How to write oeminfo from fastboot

Hello,
I expent all the sunday trying to do that and it was unproductive. I unbriked the phone and arrive to an simple android vaersion waiting to be replaced.
Can please someone explain us step by step with commands in the power shell how to flash oeminfo?
I tried "fastboot flash .\oeminfo" and didn't work. Couldn't get the image from the file (something like that) Because is not an .img file, like some others.

I installed twrp as recovery and erecovery with multitool and in the command line with: "fastboot flash recovery twrp-3.1.1-0-berlin.img"

Nothing happend, when I reboot with the combination of buttons, it starts with a black screen for a little while and then reboot again, just normal and enter to android.

Finally, I tryed to use the unbrick option of the multitool and it asks me for: system.img, boot.img, cust.img, recovery.img, userdata.img

What I found doesn't have userdata.img and clust.img, so multitool coulnd'nt do nothing.

My original compilation is BLN-L21C432B382

I'm so close to recover my phone... HELP!

Thank you!

thanks phone back to work again

BUT HOW TO WRITE OEMINFO FROM FASTBOOT

Like others commands recovery or boot... Just change the name of partition that you want to flash
Fastboot flash oeminfo ....

Repeat flash steps then flash system and do factory reset

If you can boot erecovery just update with Otg or use sdcard, system partition don't needed at all...

I can not enter the Erecovery mode Just enter the recovery mode with the USB cable connected to the PC and the button upwards will restart continuously maybe that's why? and arrives at 5 the update by sd when I press the 3 buttons and fail

 

[jawadadil9]

Flashed boot.img to kernel partition

Hello!
I have debranded my honor 6x and installed EMUI 8.0 on it. My phone was giving me error on boot partition for installing custom rom earlier and then while restoring the backup later. I flashed boot.img file to kernel partition because there was no boot partition showing up in partitions.
I had to flash recovery with following command:

fastboot flash recovery_ramdisk recovery.img

instead of

fastboot flash recovery recovery.img

(this give me error for partition length).
same issue is appearing while flashing boot.img with

command fastboot flash boot boot.img.

phone is still going to fastboot mode. recovery is getting flashed successfully but can't boot into recovery.
I tried flashing open kirin and that was flashed too, but issue is still same. Help me regarding this issue.

 

[player615]

Hello!
I have debranded my honor 6x and installed EMUI 8.0 on it. My phone was giving me error on boot partition for installing custom rom earlier and then while restoring the backup later. I flashed boot.img file to kernel partition because there was no boot partition showing up in partitions.
I had to flash recovery with following command:

fastboot flash recovery_ramdisk recovery.img

instead of

fastboot flash recovery recovery.img

(this give me error for partition length).
same issue is appearing while flashing boot.img with

command fastboot flash boot boot.img.

phone is still going to fastboot mode. recovery is getting flashed successfully but can't boot into recovery.
I tried flashing open kirin and that was flashed too, but issue is still same. Help me regarding this issue.

It's a commun error just reflash all firmware with HwOta.

 

[player615]

Hello,
I expent all the sunday trying to do that and it was unproductive. ...

Thank you!

Put oeminfo file in the same folder with adb & fastboot. And write this command
( Fastboot flash oeminfo oeminfo )
To be clear , the name of file's partition doesn't care even he haven't .img at the end.

 

[htceruno]

Put oeminfo file in the same folder with adb & fastboot. And write this command
( Fastboot flash oeminfo oeminfo )
To be clear , the name of file's partition doesn't care even he haven't .img at the end.

fastboot flash system SYSTEM.img
target reported max download size of 471859200 bytes
sending sparse 'system' (460818 KB)...
OKAY [ 12.193s]
writing 'system'...
FAILED (remote: sparse flash write failure)
finished. total time: 12.227s
hi i cant flash system.img what should i do?

Hello,
Thanks for your help, was something basic but I missed it I was not writting the name of the partition. I need more help, please. I tried for 4 hours and I couldn't.
I choose the oeminfo called "BLN-AL20C00" provided (which is different than the original of my phone, I understand I can change it, should I choose the same one original in my phone?). It shows a different logo in the reboot, but entering to the same basic useless android.
I downloaded the "update.zip" and "update_full_BLN-AL20_all_cn" and put the update app on dload folder. Reboot pushing the 3 buttons but it didnt work, stuck at 5%.
I extracted the boot, cust, recovery and system and loaded from fastboot. boot, cust and recovery loaded fine. But system has an error. reported by alijowkar before, the same that I quote happened to me (could you solve it alijowkar?)

So, I would beg you to explain me step by step with commands to copy paste how to save my phone. Thank you very much.

Thank you

 

[htceruno]

Finally phone back to work..Ty's.....all the help to community..and player615..

Please tell us what did you do exactly after installing the simple android: what oem did you use, etc, thank you!

 

[player615]

Hello,
Thanks for your help, was something basic but I missed it I was not writting the name of the partition. I need more help, please. I tried for 4 hours and I couldn't.
I choose the oeminfo called "BLN-AL20C00" provided (which is different than the original of my phone, I understand I can change it, should I choose the same one original in my phone?). It shows a different logo in the reboot, but entering to the same basic useless android.
I downloaded the "update.zip" and "update_full_BLN-AL20_all_cn" and put the update app on dload folder. Reboot pushing the 3 buttons but it didnt work, stuck at 5%.
I extracted the boot, cust, recovery and system and loaded from fastboot. boot, cust and recovery loaded fine. But system has an error. reported by alijowkar before, the same that I quote happened to me (could you solve it alijowkar?)

So, I would beg you to explain me step by step with commands to copy paste how to save my phone. Thank you very much.

Thank you

If you want to rebrand just flash with fastboot oeminfo that you want and flash update.zip file of MM version first, then unlock your BL and Follow Hwota guide .

 

[htceruno]

If you want to rebrand just flash with fastboot oeminfo that you want and flash update.zip file of MM version first, then unlock your BL and Follow Hwota guide .

Thank you! but What is MM, sorry

---------- Post added at 12:22 PM ---------- Previous post was at 12:18 PM ----------

If you want to rebrand just flash with fastboot oeminfo that you want and flash update.zip file of MM version first, then unlock your BL and Follow Hwota guide .

And If I don't want to rebrand? is it easier?