Ok, I will explain step by step what to do after installing the factory mode to have a working phone, using the indian variant of OEMINFO (I'm not responsable for any damage or anything).NOTE:
this method is only for Honor6X and GR5-2017 Devices.
I am not responsable for any other damage:
**losing serial number,imei, or any other problem.**
this one will force to unlock bootloader code and FRP,and all your data will be erased.
it will help you to debrand to other regions easily.
************************************************************
you need at first this files:
-HL2BLNTMBD001051*
-HONOROEMINFO
-DRIVER HANDSET*
-IMAGE DOWNLOADER*
----------------------
1-Preparing files:
-exrtract all files below
-then install driver :
-once installed open IDT and follow the steps :
-then browse in folder HL2BLNTMBD001051 and select :
----------------------
2-In the side of the phone :
-you have to open your phone to work on the motherboard :
-you need an object to touch the testpoints of the motherboard (Everything who's metallic can serve you)
-make sur that you press testpoints, then hold and put usb cable in the same time:
-[if phone turn on, turn it off and make sur that you contact between testpoints]
-you will see in the computer Your device is detected as(Huawei USB COM1.0)
if not, reinstall driver and reboot the computer.
----------------------
3-Runnig the work:
-now click on (play) button in IDT. [ you will see that the progression has started].
-once progression finished,go to the next step(4)
-if it fail..don't panic.
just flash SYSTEM.img manually with fastboot (system.img he is in fastbootimage folder).
----------------------
4-finishing:
-now your phone start working as factory mode,
reboot fastboot and flash any oeminfo file given or of your choice.
-once again done.
the last thing to do is update your firmware with eRecovery or by dload method (launching software upgrade app)
----------------------
Done :good: say thanks
* Once you are in fabric mode android, shut down the device.
* press down button and power to enter fastboot.
* Open the console powershell in the folder "HonorOEMINFO" downloaded before
* type the command:
fastboot flash oeminfo .\BLN-L22C675B340
Should be this one
* Now, let's download the new android in:
https://combinefile.com/index.php?a=downloads&b=file&c=download&id=9808
* Unzip the file. Inside you will find a folder named "dload" which contains a zipped file. tar.gz. I's simmilar to ".zip", only that you will have to unzip it many times until you can access to the files.
*Finally you will have "UPDATE.APP" and a folder named "BLN-L22_channel_in". IGNORE THAT FOLDER.
* Copy ONLY the file named "UPDATE.APP" in a sdcard, in a folder named "dload" (remember: not the folder "BLN-L22_channel_in" and it's content)
* shutdown the mobile and enter in recovery by pressing volume up and down and then power, until the phone enter to recovery and agree to install.
* Now you have android functional. Start it, select language and do the first configuration (you can omit the google credentials for now). There is a second update we will download from: http://update.hicloud.com:8180/TDS/d...channel_in.zip
* Again, unzip it and locate the new "UPDATE.APP" (100 MB). Move it to the dload folder in the sdcard (replacing the previous used "update.app"[+3GB]).
* Now dial *#*#2846579#*#* from your phone dialer to open a *hidden menu.
* Now select Software Upgrade and start SDCard Upgrade.
* Now select and run the update.
* The phone now will restart and will be able to update. Now android is FULLY OPERATIVE and your phone is back to life.
NOTE: the first download has the patch update but didn't work for me, because that I point to the second source which did work for me. I get the information for the second in https://forum.xda-developers.com/honor-6x/help/honor-6x-android-oreo-update-t3660243/page8 thanks to Kalyani
I could make it real thanks to player615 who help me a lot, I just writting the final steps he patinelly told me one by one. Big thanks!
