How To Guide [GUIDE][UNBRICK] Realme 8i/Narzo 50 Unbrick Free without Auth [RMX3151][RMX3286]

[pritish1998]

Yes Sir A32 Global ( from philippines user), but still can use SP splash tool, and recovery mode. only looping in realme is my problem now

Ok do one thing edit the scatter file in the zip " look for 'super' in it and change download = false to true" save it now in spflash tool reselect the scatter and flash

 

[reignjoseph]

Ok do one thing edit the scatter file in the zip " look for 'super' in it and change download = false to true" save it now in spflash tool reselect the scatter and flash

this file from false to true?

 

[lanztotot]

hello .. im stuck in realme logo now .. after doing all this .. i already do python mtk e metadata,userdata,md_udc .. any suggestions ?

 

[tisil]

Ok do one thing edit the scatter file in the zip " look for 'super' in it and change download = false to true" save it now in spflash tool reselect the scatter and flash

If flashing without switching "false" to "true" was already done, do I have to format flash in SP Flash Tool?

 

[pritish1998]

If flashing without switching "false" to "true" was already done, do I have to format flash in SP Flash Tool?

Just do as it's written... Do not format in spflash tool

 

[tisil]

Just do as it's written... Do not format in spflash tool

I did as written and I am stuck in a bootloop

 

[pritish1998]

I did as written and I am stuck in a bootloop

You need to erase userdata

python mtk md_udc,metadata,userdata


It's also written in the post

 

[juniorhero]

Do u have stock rom for rmx3286 narzo 50
Current version is a49
Downgrading to a30 or a32 is either too old or sensors may not work correctly

I want to use your lineageos custom rom
Which version should I downgrade to
Need help

 

[yrokudaki115]

Hello everyone! So after the new mediatek DAA and SLA protection bypasses you can find github repo of here , using the bypass we are able to use SPFlash Tool, here is a guide how you can do it! This guide is for RMX3151 (Realme 8i) and RMX3286 (Narzo 50) ONLY. DON'T DO ANY OF THESE IF YOU HAVE SOMETHING ELSE!

ALWAYS USE DOWNLOAD ONLY MODE OF SP FLASH TOOL.
DON'T TOUCH ANYTHING RELATED TO FORMAT ON SP FLASH TOOL! (IT'S WRITTEN EVERYWHERE, YOU WILL LOSE YOUR IMEIS IF YOU USE FORMAT ALL + DOWNLOAD. YOU ARE SAFE IF YOU USE DOWNLOAD ONLY.)

Windows Method
Requirements:
Bypass Tools Pack - (DRIVER AND BYPASS FILES)
SP Flash Tool

Decrypted OFP (OPPO FIRMWARE PACKAGE) Files:

FULL FIRMWARE - INCLUDES THE "USERDATA" PARTITION, HENCE LARGER.
A.32 (Indian) - Mega | GDrive
A.32 (Global) - Mega | GDrive
A.30 (Indian) - Mega | GDrive
These firmwares are from Realme 8i but will work for Narzo 50 also (I will add Narzo 50 firmwares soon)

Install Python from Windows Store
libusb-win32 - Having Issues? Use this.
Get usbdk installer (.msi) from here and install it

1) Extract the zip
2) Go to driver folder, find the .inf file right click and press install.

3)Download this file and install it, after installing power off phone and connect to pc while holding Vol+- (don't leave the buttons after connecting) . You might need this driver as well if it's not detected.

Press next, connect your device to PC while holding Vol+- buttons (your device needs to be powered off, and don't leave the buttons) and you will see the mtkdriver down below. Install it.

Choose MediaTek USB Port and install it.
4)Then run the brom.bat under Bypass folder.
View attachment 5474379

5) Now power off the phone and connect the phone while holding volume + and - (Don't leave the buttons until the bypass is done)
View attachment 5474375

6)After the above step Go into Flash Tool folder and open the SPFlash tool go to Options>Option
View attachment 5474391

Нажмите «Подключения», выберите UART и установите скорость передачи данных на 921600.
View attachment 5474395

7) после этого выбираем скаттер файл и так же, если не поставили, ставим свой Download-агент. Вам не нужно выбирать файл авторизации, так как авторизация отключена. Как только вы это сделаете, это должно выглядеть так. ВСЕГДА УБЕДИТЕСЬ, ЧТО ВЫБРАН РЕЖИМ ТОЛЬКО ЗАГРУЗКА! НЕ ВЫБИРАЙТЕ ДРУГИЕ РЕЖИМЫ!
View attachment 5474397

УБЕДИТЕСЬ, что выбрано «Только загрузка». НЕ ВЫБИРАЙТЕ НИЧЕГО ДРУГОГО! Вы потеряете свои IMEI, серийные номера, возможность аттестации оборудования и т. д., если вы выберете «Формат данных + загрузка», убедитесь, что вы выбрали «Только загрузка».

8) Сначала снимите флажок oplusreserve2. Теперь вы можете начать загрузку с помощью кнопки, после чего появится галочка. Вы можете перезагрузить свой телефон и использовать его, как раньше! Все ваши пользовательские данные (неизбежно) будут удалены!

После прошивки должно получиться вот так. Загрузка завершена. Наслаждаться!
View attachment 5480041

Заметки :
После того, как этот телефон может не загрузиться из-за шифрования, вы можете выполнить любую из приведенных ниже процедур, чтобы отформатировать данные и загрузить телефон.
1. Если вы можете получить доступ к рекавери, удерживая громкость и кнопку питания, сотрите все данные из восстановления и перезагрузитесь.

2. Если вы не можете получить доступ к восстановлению, выключите телефон, затем введите эту команду в mtkclient:

python mtk e metadata,userdata,md_udc

и подключите телефон, удерживая обе кнопки громкости. После этого просто перезагрузите телефон

Также обратите внимание, что первая загрузка занимает некоторое время, поэтому не паникуйте, оставьте ее на несколько минут, пока она загрузится.

Кредиты:
https://github.com/bkerler/ для расшифровки и создания инструмента.

Если у вас возникнут какие-либо проблемы, свяжитесь со мной здесьAfter the

After the firmware, the touchscreen does not work, what to do, help

 

[lanztotot]

can anyone upload A.44 decrypted firmware ?

 

[supernexon]

Hello everyone! So after the new mediatek DAA and SLA protection bypasses you can find github repo of here , using the bypass we are able to use SPFlash Tool, here is a guide how you can do it! This guide is for RMX3151 (Realme 8i) and RMX3286 (Narzo 50) ONLY. DON'T DO ANY OF THESE IF YOU HAVE SOMETHING ELSE!

ALWAYS USE DOWNLOAD ONLY MODE OF SP FLASH TOOL.
DON'T TOUCH ANYTHING RELATED TO FORMAT ON SP FLASH TOOL! (IT'S WRITTEN EVERYWHERE, YOU WILL LOSE YOUR IMEIS IF YOU USE FORMAT ALL + DOWNLOAD. YOU ARE SAFE IF YOU USE DOWNLOAD ONLY.)

Windows Method
Requirements:
Bypass Tools Pack - (DRIVER AND BYPASS FILES)
SP Flash Tool

Decrypted OFP (OPPO FIRMWARE PACKAGE) Files:

FULL FIRMWARE - INCLUDES THE "USERDATA" PARTITION, HENCE LARGER.
A.32 (Indian) - Mega | GDrive
A.32 (Global) - Mega | GDrive
A.30 (Indian) - Mega | GDrive
These firmwares are from Realme 8i but will work for Narzo 50 also (I will add Narzo 50 firmwares soon)

Install Python from Windows Store
libusb-win32 - Having Issues? Use this.
Get usbdk installer (.msi) from here and install it

1) Extract the zip
2) Go to driver folder, find the .inf file right click and press install.

3)Download this file and install it, after installing power off phone and connect to pc while holding Vol+- (don't leave the buttons after connecting) . You might need this driver as well if it's not detected.

Press next, connect your device to PC while holding Vol+- buttons (your device needs to be powered off, and don't leave the buttons) and you will see the mtkdriver down below. Install it.

Choose MediaTek USB Port and install it.
4)Then run the brom.bat under Bypass folder.
View attachment 5474379

5) Now power off the phone and connect the phone while holding volume + and - (Don't leave the buttons until the bypass is done)
View attachment 5474375

6)After the above step Go into Flash Tool folder and open the SPFlash tool go to Options>Option
View attachment 5474391

Click on Connections and select UART and set Baud Rate to 921600
View attachment 5474395

7) after that choose scatter file and also if not set, set your download-agent. You don't need to select auth file as authorization is disabled. Once you do it, it should look like this. ALWAYS MAKE SURE DOWNLOAD ONLY MODE IS SELECTED! DON'T SELECT OTHER MODES!
View attachment 5474397

Make SURE "Download Only" is selected. Don't select ANYTHING ELSE! You will lose your IMEIs, Serial Numbers, Capability of Hardware Attestation etc. if you choose "Format data + Download" make SURE you selected "Download Only".

8) Uncheck oplusreserve2 first. Now, you can start downloading with the button and after that a checkmark will appear. You can reboot your phone and use it like before now! All your userdata will (inevitably) be cleared!

After flashing it should look like this. Download has been complete. Enjoy!
View attachment 5480041

Notes :
After this phone might not boot due to encryption, you can do any of the below procedures to format your data and boot your phone
1. In case you can access recovery by holding volume and power button - Wipe all data from recovery and reboot

2. In case you cannot access recovery, power off phone then enter this command in mtkclient :

python mtk e metadata,userdata,md_udc

and connect phone while holding both volume buttons. After this just reboot phone

Also note that first boot takes some time, so don't panic leave it for few minutes it'll boot

Credits :
https://github.com/bkerler/ for decryptor and for creating the tool.

If you face any issues contact me here

 

[aadarsh.maurya12]

View attachment 5480563

SP_Flash_Tool_v5.2208_Linux.zip

drive.google.com

try this i had same issue but this fixed

 

[User_Player_126]

please help i accidentally deleted the whole android via mtk client GUI and flashed RMX3151GDPR_11_A.44 on sp flash tool and it booted successfully but the touch stopped working and when i put it on charging it restarts automatically after a few seconds is it HW or SF? I really don't know what to do, do you have any solution?

 

[JeonHeejinie]

Other people tried and it's working for them... Idk what is the problem at your end. ... Reach out to me on telegram we will help

need spflashtool link bro... my tool says MTK67 not supported i tried other versions but still wont accept scatter file.. i tried ver 3.17 but it gives 5011 error

 

[effectively0]

need spflashtool link bro... my tool says MTK67 not supported i tried other versions but still wont accept scatter file.. i tried ver 3.17 but it gives 5011 error

same problem here. I found you can search the internet for SP_Flash_Tool_v5.2208 and that loads the scatter file.

 

[sh1m4n1o]

nothing responds and pc saying device not recognized

 

[baconkingroblox]

Hello everyone! So after the new mediatek DAA and SLA protection bypasses you can find github repo of here , using the bypass we are able to use SPFlash Tool, here is a guide how you can do it! This guide is for RMX3151 (Realme 8i) and RMX3286 (Narzo 50) ONLY. DON'T DO ANY OF THESE IF YOU HAVE SOMETHING ELSE!

ALWAYS USE DOWNLOAD ONLY MODE OF SP FLASH TOOL.
DON'T TOUCH ANYTHING RELATED TO FORMAT ON SP FLASH TOOL! (IT'S WRITTEN EVERYWHERE, YOU WILL LOSE YOUR IMEIS IF YOU USE FORMAT ALL + DOWNLOAD. YOU ARE SAFE IF YOU USE DOWNLOAD ONLY.)

Windows Method
Requirements:
Bypass Tools Pack - (DRIVER AND BYPASS FILES)
SP Flash Tool

Decrypted OFP (OPPO FIRMWARE PACKAGE) Files:

FULL FIRMWARE - INCLUDES THE "USERDATA" PARTITION, HENCE LARGER.
A.32 (Indian) - Mega | GDrive
A.32 (Global) - Mega | GDrive
A.30 (Indian) - Mega | GDrive
These firmwares are from Realme 8i but will work for Narzo 50 also (I will add Narzo 50 firmwares soon)

Install Python from Windows Store
libusb-win32 - Having Issues? Use this.
Get usbdk installer (.msi) from here and install it

1) Extract the zip
2) Go to driver folder, find the .inf file right click and press install.

3)Download this file and install it, after installing power off phone and connect to pc while holding Vol+- (don't leave the buttons after connecting) . You might need this driver as well if it's not detected.

Press next, connect your device to PC while holding Vol+- buttons (your device needs to be powered off, and don't leave the buttons) and you will see the mtkdriver down below. Install it.

Choose MediaTek USB Port and install it.
4)Then run the brom.bat under Bypass folder.
View attachment 5474379

5) Now power off the phone and connect the phone while holding volume + and - (Don't leave the buttons until the bypass is done)
View attachment 5474375

6)After the above step Go into Flash Tool folder and open the SPFlash tool go to Options>Option
View attachment 5474391

Click on Connections and select UART and set Baud Rate to 921600
View attachment 5474395

7) after that choose scatter file and also if not set, set your download-agent. You don't need to select auth file as authorization is disabled. Once you do it, it should look like this. ALWAYS MAKE SURE DOWNLOAD ONLY MODE IS SELECTED! DON'T SELECT OTHER MODES!
View attachment 5474397

Make SURE "Download Only" is selected. Don't select ANYTHING ELSE! You will lose your IMEIs, Serial Numbers, Capability of Hardware Attestation etc. if you choose "Format data + Download" make SURE you selected "Download Only".

8) Uncheck oplusreserve2 first. Now, you can start downloading with the button and after that a checkmark will appear. You can reboot your phone and use it like before now! All your userdata will (inevitably) be cleared!

After flashing it should look like this. Download has been complete. Enjoy!
View attachment 5480041

Notes :
After this phone might not boot due to encryption, you can do any of the below procedures to format your data and boot your phone
1. In case you can access recovery by holding volume and power button - Wipe all data from recovery and reboot

2. In case you cannot access recovery, power off phone then enter this command in mtkclient :

python mtk e metadata,userdata,md_udc

and connect phone while holding both volume buttons. After this just reboot phone

Also note that first boot takes some time, so don't panic leave it for few minutes it'll boot

Credits :
https://github.com/bkerler/ for decryptor and for creating the tool.

If you face any issues contact me here

My Realme 8i is finally working, but it says that I have no network coverage, and the IMEI is unknown. How do I fix this? I used download only, please help me asap

 

[baconkingroblox]

I fixed the imei issue by flashing a44. a few weeks later I woke up at 4am to my phone being in recovery mode, turns out it's a bootloop. I tried downgrading to a44 from a46 but now i have an endless bootloop. How do i fix this quickly without data loss?

 

[Hodar]

I have realme 8i with the current image boot recovery. Will this thread help me?

 

[osnacla]

Hello everyone and thanks to pritish1998 for the guide, it is very useful. I have tried to follow it but I think I have and additional problem with me Realme 8i and it is the reason why I cannot complete the process with the SP flash Tool.

My phone seems to be continuously rebooting during the process (every few seconds it vibrates), does anyone know if there is anything I can do to stop it from being in this loop? Because in the SP flash Tool process I managed to get it to start but it didn't finish.

Thanks