DO IT AT YOUR OWN RISK
Files needed:
LG Drivers: https://mega.nz/#!oQV3yS6Y!D2JPtEMfHiAXB5E5jC2lfFH8ZIOVLNhEHju28JtYwfI
LG Flash Tool: https://mega.nz/#!BB8UgKCT!YAdGWfYGXGLiV5arZzeSGGivtLlW-BuiKlv_ci2Xp0Y
LG Firmware: http://www.lg-phones.org/how-to-download-all-lg-phone-firmware.html
Fast alternative (for model LG-H345 ONLY): http://csmgdl.lgmobile.com/dn/downloader.dev?fileKey=FW9AW29132Q1ABFE1681VUH/H34510e_00.kdz
Unbricking Procedure
Remove the battery and put it back in.
2. Hold the Volume Up button (ONLY) while connecting to USB Cable
3. The Volume up button needs to be held until it reaches download mode
4. Open the Flash Tool
5. Select Type: 3GQCT
6. PhoneMode: EMERGENCY
7. KDZ : locate your .KDZ firmware file
8. Click on Normal Flash
9. Click on Start
10. Click on Clear update registry
11. Country: different country
12. Language: English
13. Click okay and wait for the LG Mobile Support tool to recognize the device. It takes a minute or two but the tool will recognize it. The software starts the extraction and re-boots at %100. Don't click on anything, just wait for your device to reboot, then you can remove USB cable. Your device will boot normally, and the it is no longer stuck in a boot loop. Your userdata will not be deleted.
Credits: dj rios and AP2FTW from Androidforuns.com
Files needed:
LG Drivers: https://mega.nz/#!oQV3yS6Y!D2JPtEMfHiAXB5E5jC2lfFH8ZIOVLNhEHju28JtYwfI
LG Flash Tool: https://mega.nz/#!BB8UgKCT!YAdGWfYGXGLiV5arZzeSGGivtLlW-BuiKlv_ci2Xp0Y
LG Firmware: http://www.lg-phones.org/how-to-download-all-lg-phone-firmware.html
Fast alternative (for model LG-H345 ONLY): http://csmgdl.lgmobile.com/dn/downloader.dev?fileKey=FW9AW29132Q1ABFE1681VUH/H34510e_00.kdz
Unbricking Procedure
Remove the battery and put it back in.
2. Hold the Volume Up button (ONLY) while connecting to USB Cable
3. The Volume up button needs to be held until it reaches download mode
4. Open the Flash Tool
5. Select Type: 3GQCT
6. PhoneMode: EMERGENCY
7. KDZ : locate your .KDZ firmware file
8. Click on Normal Flash
9. Click on Start
10. Click on Clear update registry
11. Country: different country
12. Language: English
13. Click okay and wait for the LG Mobile Support tool to recognize the device. It takes a minute or two but the tool will recognize it. The software starts the extraction and re-boots at %100. Don't click on anything, just wait for your device to reboot, then you can remove USB cable. Your device will boot normally, and the it is no longer stuck in a boot loop. Your userdata will not be deleted.
Credits: dj rios and AP2FTW from Androidforuns.com