[GUIDE]Unlock Bootloader Easily

[testmember]

my devices shows up as QUSB_BULK and miflash does not recognize it

 

[Choose an username...]

my devices shows up as QUSB_BULK and miflash does not recognize it

As QUSB-BULK under Unknown Devices or under USB devices? If it is under Unknown you have to find the Qualcomm HS-USB QDLoader 9008 driver; if it is under USB you have to uninstall it (delete driver software too) and it may install the Qualcomm driver

 

[testmember]

Its under usb devices. I tried to reinstall the axon 7 and qualcomm drivers but nothing worked.

 

[Choose an username...]

Its under usb devices. I tried to reinstall the axon 7 and qualcomm drivers but nothing worked.

I guess you used Zadig. You just have to right click and Uninstall -> Delete driver software, then unplug the phone and plug it again.

 

[testmember]

I guess you used Zadig. You just have to right click and Uninstall -> Delete driver software, then unplug the phone and plug it again.

Thanks that worked

 

[ricaflores]

How?
I can´t do it (anything).

---------- Post added at 01:24 PM ---------- Previous post was at 01:17 PM ----------

This help me:

"10- You'll boot in TWRP once there do the following :
Code:
* tap CANCEL
* tap WIPE
* tap FORMAT DATA and Follow the Instructions"

Thank you.

Could you help explain this? I am also stuck here and I can't use my device. Thank you

 

[Choose an username...]

Could you help explain this? I am also stuck here and I can't use my device. Thank you

TWRP will ask for a password, hit Cancel, then go to Wipe -> Format data and type yes

 

[Justian2001]

Flash "the syntax of the command is incorrect"

When i tryed to flash it say's this "the syntax of the command is incorrect" what can i do about it?
my phone is the : Axon 7G (Global)

 

[Choose an username...]

When i tryed to flash it say's this "the syntax of the command is incorrect" what can i do about it?
my phone is the : Axon 7G (Global)

well it's pretty darn simple: CHECK THE SYNTAX OF THE COMMAND :laugh:

If you believe it's right then copy it and send it here

 

[Justian2001]

well it's pretty darn simple: CHECK THE SYNTAX OF THE COMMAND :laugh:

If you believe it's right then copy it and send it here

That's all it says.

 

[KARIM9377]

Are you sure

[GUIDE]Unlock Bootloader Easily

Hi all. I will present new and easier method to unlock bootloader. This guide works on all models.

Before begin;

- Be sure backed up your stuffs on internal storage.
- Be sure that using x64 Windows.
- Be sure that your battery is over 50%
- Be sure that Disable Driver Signature Verification

Download:

MiFlash 20160401 https://drive.google.com/file/d/0B065LdNGqJLGM2xfSkZMbVYwc3M/view
15 second ADB Installer https://forum.xda-developers.com/showthread.php?t=2588979
ZTE Axon 7 USB Drivers https://androidfilehost.com/?fid=889964283620763004
ZTE Axon 7 Bootloader Unlock Images by TurkDevs https://androidfilehost.com/?fid=817906626617943545

Unlock Bootloader:

1. Install MiFlash. Driver installation will be done automatically.
2. Install ADB Installer. Press Y for all steps on installation.
3. Install Axon 7 Driver.
4. Turn on from developer options "USB Debugging" and "Unlock OEM".
5. Enter; "adb reboot edl"
6. Go Device Manager of Windows and be sure you see your device as "Quallcomm HS-USB QDLoader 9008".
7. Extract ZTE_AXON_7_BOOTLOADER_UNLOCK_IMAGES_BY_TURKDEVS.zip
8. Go MiFlash and Refresh. Your device will be there. Select from top Unlock Images folder which you've extracted.
9. Flash and wait until it is done.
10. Long press power button and let your device is on.
11. Enter "adb reboot bootloader" after your device is on.
12. Enter "fastboot oem unlock-go" when you are on bootloader interface.
13. Your data will be erased on this step and device will boot with unlock bootloader.

This tool is from forum.turkdevs.com
Orginal thread: https://forum.turkdevs.com/konu/zte-axon-7-bootloader-acma-root-ve-twrp-yukleme.12225

Hit thanks button if I help you.

ARE YOU SURE THIS meathead WORK ON Stock Nougat 2017G
please if anyone tested on nougat tell me

 

[Choose an username...]

ARE YOU SURE THIS meathead WORK ON Stock Nougat 2017G
please if anyone tested on nougat tell me

Don't be insufferable. Just do the damn method. It says right on top that it works on all models

 

[KARIM9377]

Don't be insufferable. Just do the damn method. It says right on top that it works on all models

I know all models but I am asking for the nougat B09
It's working on it
He say yes it's work but did he try it on nougat

 

[atakan33]

I know all models but I am asking for the nougat B09
It's working on it
He say yes it's work but did he try it on nougat

i try on nougat B08 also B09 works too

 

[Choose an username...]

I know all models but I am asking for the nougat B09
It's working on it
He say yes it's work but did he try it on nougat

Of course it will work, otherwise he would have pointed out that you would need to downgrade. And this wouldn't have been broken with an incremental update.

 

[bersek71]

thanks! It's OK with nougat!

 

[Martinius79]

Thanks!

This method worked for me on a A2017G running stock B08 (Nougat) with locked bootloader.

Build number: ZTE A2017GV1.2.0B08

Only difference was between step 10 and 11. The device was encrypted so I ended up in the "enter password" dialog after flashing, reset and reboot from edl (because of verity break I guess).
I had to force the device manually into the bootloader (switch off and then hold Volume-Up and Power button to get into the recovery and then to the bootloader).

BTW: Flashed TWRP 3.2.1.0 directly after first boot with axon7tool and then installed Magisk 15.3. Magisk seems to work pretty well for me with this device, root/SU support is working and SafetyNet Patch is also fine.

Thanks for the guide and the links again!

Bye
Martinius

 

[Tunox]

Why everyone here do it this hard way ?
I done it yesterday with the regulär fastboot commands and it works pretty good to inlock the bootloader. I'm in 2017G, but should works on all the other variants.

 

[Martinius79]

Why everyone here do it this hard way ?
I done it yesterday with the regulär fastboot commands and it works pretty good to inlock the bootloader. I'm in 2017G, but should works on all the other variants.

Hello Tunox!

What do you mean with regular fastboot commands?
You went into the bootloader, connected the phone via USB and used "fastboot unlock-oem" ?

Does your phone now show a text message while booting/starting saying that the bootloader is unlocked?

And which build number does your phone show?

Bye
Martinius

PS: Grüße aus Berlin

 

[Tunox]

Hey Martinius,

you're correct. Just enter the fastboot mode (trough the recovery Option maybe) and the open a cmd and look, if your device is in air if yes, then you only need to type "fastboot unlock OEM bootloader" , wait and hit "des" in the phonescreen. Thats it.