[Guide]Unlocking Android Protection Code Without Reset Or Root

Search This thread

Moreed

New member
Nov 20, 2014
1
0
Unlocking a password on a broken sceen Samsung Note 2

Hello

I have a Samsung Note 2 that has a broken screen, and i want to use the steps you have provided to unlock the password and retrieve the information from the Device VIA Kies 3 is that Possible on this kind of Phone ?
I want to back up the information on the phone before i have the whole screen fixed.
Another Question: Will repairing the Whole screen loose me the files on the phone ?

Please reply ASAP its urgent

Much Appreciated
 

geoblanaru

New member
Dec 26, 2014
1
0
Unuseful...

privacy Password does not let you pass over main screen...how can you connect your device ?you need to confirm that..it"s not possible on my device...:eek:
 

diz4dat

Member
Jan 30, 2015
6
0
Help :( BLU DASH 5.0 D410i Password lock


1.Please note that by using this method you can unlock phone without losing any data.
2.This must not be used for any illegal purpose.
3.I do not hold any responsibility of any phones bricked using this method(though it is tested)
.
.

.
.

.
.
.
.

.

My cousin is living in another country and he sent me this BLU DASH 5.0 D410i.
He told me that if I can figure out how to by pass the password screen "please enter the privacy protection password to unlock"
then I can have the phone as my own. I've tried your method. After I installed the ADB-driver it doesn't detect my phone so I tried going into
recovery mode (Power + Volume key) I chose "apply update from ADB" and finally "Adb Driver Installer" recognized my phone...so I proceed and install the driver...it went successfully and I pressed "exit". Next I turned on my phone and again it went to the screen that has the password lock with this message "please enter the privacy protection password to unlock" in the "Android Multi Tools v1.02b" folder I open the program and pressed 1 but still not recognizing my phone also pressed 2 and the other numbers and nothing happened only this message is showing "press any key to continue"

Sometimes it shows these messages:
*daemon not running. starting it now on port 5037 *
*daemon started successfully *
List of devices attached

Press any key to continue...


-Am I doing something wrong, am I missing a step, do I need to install anything else?

*note: I never had the chance to see the phone before the password problem occurs...but I made contact with my cousin and he said "usb debugging" is NOT turned on. will that be a problem?


If you can take a minute of your time to read and help me out..i will be much grateful
 

Falastine

Member
Nov 7, 2008
22
0
Let me help alot of people, i figured out that the security code is at least 6 digits so in most cases if you ever filled it in . What would be your first guess if you type 6 numers in?

In my case it was my birthday 230484 and indeed it worked!

So think about a 6 number password!
 
what if USB debugging was not enabled ?

My friends lost his pin and doesn't want to lose data !! what can I do ???

---------- Post added at 01:24 PM ---------- Previous post was at 01:18 PM ----------

Yes, usb Debugging Is Required.
Without It The Tool Can't Work
Your Only Way Now Is To Hard Reset And Lose All Data

You can flash a modified boot.img to enable USB debugging just by changing the ro.adb.debugable=0 to 1
 

sirejohnnee

New member
Mar 18, 2016
1
0
Whoever you are you just saved my day. Forgot my privacy password completely and you jogged my memory. I just figured it out. Plus our birthdays are almost on the same day with same month and year. Mine is 250484. What an irony. Thanks again though
 

Daniel Owusu

New member
Aug 12, 2016
4
0

1.Please note that by using this method you can unlock phone without losing any data.
2.This must not be used for any illegal purpose.
3.I do not hold any responsibility of any phones bricked using this method(though it is tested)
.
.

.
.

.
.
.
.

.
Please do you need to install java to make this tools work because I installed the adb drivers and has unpacked android multi tools but it can't be opened
 

karyuudo

Member
Dec 7, 2013
26
5
Big thank you for this tool. I was able to get back into a Moto X device that I found in a recycling box :) Now it's mine! LOL :D
 

fpjones3

Senior Member
Aug 2, 2013
66
0

1.Please note that by using this method you can unlock phone without losing any data.
2.This must not be used for any illegal purpose.
3.I do not hold any responsibility of any phones bricked using this method(though it is tested).
So I unpacked the tool as you instructed then launched ADBDriverInstaller.

Am I supposed to see a device listed in ADBDriverInstaller?

Anyway, I launched Android Multi Tools, selected 3. It shows the following:
*daemon not running. starting it now on port 5037 *
*daemon started successfully *

But I got nothing listed.

Please advise. Thanks!
 

domingo777i

Member
Oct 14, 2015
20
2
Can I bypass the Gesture Code without ADB enabled on device?

I don't think this phone is rooted or has ADB Deugging Enabled how do I bypass Gesture or Pin?
 

curlybaby96

New member
Jul 12, 2017
2
0
Have there been any updates in this process? I'm in the same boat, NOTE 5, USB debugging is off, can't get phone to be recognized
 

aniket3648

New member
Sep 25, 2017
1
0
In my case.....i had removed my sim and then switched my phone on and after starting the phone it is asking for privacy protection password.......what should i do......Even i tried the hard reset but it did'nt worked.....please help me..
 

Top Liked Posts

  • There are no posts matching your filters.
  • 23
    THIS METHOD WILL NOT WORK IN NEWER VERSIONS OF ANDROID
    1.Please note that by using this method you can unlock phone without losing any data.
    2.This must not be used for any illegal purpose.
    3.I do not hold any responsibility of any phones bricked using this method(though it is tested)
    .
    .
    Requirements
    Links
    1.Download Android Multi Tools- Click Here
    2.Universal Adb Drivers - Click Here
    .
    .
    Now lets begin
    1.First unpack the tool.
    2.Then install the adb driver.
    3.Turn on your phone and connect it to pc via data cable.
    4.Now press 1 to check if your device is connected properly.
    5.Now if you have pin,password or face-lock please press 2.
    6.If you have pattern lock then press 3.
    7.Device will reboot and it will be unlocked.
    8.If it still shows pattern,pin or password enter window simply simply give any to unlock.
    .
    .
    Other action that can be done by this program are below
    .
    Choice detail
    1.check device for check connection of device to pc.
    4.reset gmail for reset gmail login after try many time wrong unlock
    5.wipe data for reset all data to factory setting.
    6.reboot for reboot device to normal mode or exit from adb shell.
    7.check device on fastboot mode for check connection of device to on fastboot mode.
    8.wipe data / cache on fastboot mode for erase user datat and cache on fastboot mode to resolve freeze,stuk on boot logo or slow down device. That is often found in the cpu spreadtrum sc6280/sc8810.
    9.exit fastboot mode for reboot your pc or exit fastboot.
    0.go to command promt for entering dos promt.you can use command in this soft folder and can return to the main program by type exit
    s.software info for info cpu inside,firmware version and etc.
    H.hardware info for determine the ic number of gsensor,touch screen,camera,wifi and more
    .
    .

    .
    thanks for reading this post
    Written By
    Pranto Roy
    XDA
    7
    Links
    1.download android multi tools- http://d-h.st/rCh
    2. universal adb drivers - http://adbdriver.com/upload/AdbDriverInstaller.exe
    1
    Links
    1.download android multi tools-
    2. universal adb drivers -

    thanks
    my younger bro face this problem yesterday and today i got ans
    will try and update
    1
    Hello to everyone!
    This description is very good, but unfortunately I can not help of mind. The Freetab 2099 tablet is set, the OSD, I forgot, offered through the recovery gmail account, but the machine is not connected to the Internet, and it can not be solved. The Windows XP felimeri the machine, but only shows an empty folder adb driver installation, and Total Commander, however does not see downloaded from the manufacturer's website drivers installed, but not working this solution, a multitool can not find device. Maybe a factory reset would solve the matter but has not yet been described find or install a new rom that is. Img extension of the manufacturer's side, but I do not know bekepcsolni debug mode on the machine, it does not allow the zárképrnyőről to move on.
    If anyone knows a solution to my problem, thanks in advance.

    Hello, Valer

    Seriously Man.
    Didn't Understood A Word.
    Give Details and Only Ask The Main Question
    1
    Hello!
    The Adb Driver Installer does not recognize the machine, so I installed the manufacturer's website for official drivers. Only one folder is empty, or whatever it may be copied, "The device is not responding or is not connected."

    I'll Get The Drivers