[GUIDE][UNOFFICIAL] Unbrick Your Hard Bricked Yureka/Yureka Plus

[[email protected]]

install drivers once your phone gets detected in qualcomm 9008 mode then place memory in and press volume then plug usb in phone wait for few seconds.

tried drivers of coolpad and qualcomm too still unknow device only

 

[wasim.8612]

guys can any1 provide us their emmc image of yureka plus???? plzz do the needfulll

 

[raaj13]

guys can any1 provide us their emmc image of yureka plus???? plzz do the needfulll

It's given in the first post.

Please don't confuse flashboot image with emmc image.

 

[wasim.8612]

bro thats for yureka na we need for yureka plus

---------- Post added at 12:48 PM ---------- Previous post was at 12:23 PM ----------

rename file after downlading to (.exe)

---------- Post added at 12:49 PM ---------- Previous post was at 12:48 PM ----------

rename file after downlading to (.exe)

 

[raaj13]

bro thats for yureka na we need for yureka plus

---------- Post added at 12:48 PM ---------- Previous post was at 12:23 PM ----------

rename file after downlading to (.exe)

---------- Post added at 12:49 PM ---------- Previous post was at 12:48 PM ----------

rename file after downlading to (.exe)

yureka=yureka plus (the only difference dpi 320 v 401 dpi)

 

[[email protected]]

yureka=yureka plus (the only difference dpi 320 v 401 dpi)

but what about unknown device error ....?

 

[raaj13]

but what about unknown device error ....?

install qualcomm drivers from the thread below and install them then try.
http://forum.xda-developers.com/yureka/help/reviving-hard-bricked-yu-yureka-t3154577

 

[prashi1977]

i have a device yu yuniqe which just shows QHUSB_BULK in device manager can someone please help me .. what are the steps to revive it back is it possibe to do so , i have no backup image as well .. but i have downloaded all the files needed just that qpst does not recognise the port
any help would be greatly appreciated
Thank u in advance

 

[Jimmyz0r]

i have a device yu yuniqe which just shows QHUSB_BULK in device manager can someone please help me .. what are the steps to revive it back is it possibe to do so , i have no backup image as well .. but i have downloaded all the files needed just that qpst does not recognise the port
any help would be greatly appreciated
Thank u in advance

You will need a working Yunique (maybe from a friend or someone else), you can create a backup image from it, write it on microSD card and then boot your dead Yunique from it.

 

[[email protected]]

Tried qualcomm drivers from above still same

 

[prashi1977]

You will need a working Yunique (maybe from a friend or someone else), you can create a backup image from it, write it on microSD card and then boot your dead Yunique from it.

Thank u jimmy..
aww can some one please help me out here ..i have no one who uses a yu 4711 , can someone hook me me up with a backup img.. i would be ever grateful. thank u so much

 

[pschycalrider]

thnx

Thnx to you i revived my dead hard bricked yureka becz of u...

 

[Mayankraghav]

Thanks to you i got my phone to fast boot. But still not able to unbrick it. When i flash my phone using flash tool it gives error in system erase fail and user data erase fail.

 

[raaj13]

Thanks to you i got my phone to fast boot. But still not able to unbrick it. When i flash my phone using flash tool it gives error in system erase fail and user data erase fail.

can you post the screenshots.

 

[Mayankraghav]

s28.postimg.org/xdbo885bh/IMG_20160209_244542012.jpg

s21.postimg.org/wyk5k91yf/IMG_20160209_004847.jpg

 

[raaj13]

s28.postimg.org/xdbo885bh/IMG_20160209_244542012.jpg

s21.postimg.org/wyk5k91yf/IMG_20160209_004847.jpg

Try to unlock the bootloader by this

fastboot -i 0x1ebf oem unlock

then try flashing.

If still unsuccessful then.try this.
http://forums.yuplaygod.com/threads...m12-lollipop-fastboot-images-supported.11611/
Though you will have to start updating yureka from begining if you succed also don't run cm11.bat as admin just simply open it.

 

[Diwakar1990]

Dear friends now I have some reasons to get some thanks.

I successfully revived my hard bricked yu yureka plus .

But I did a little different.

---------- Post added at 06:34 AM ---------- Previous post was at 06:33 AM ----------

Keep tuned once i configures my device I will post the method and I think this gonna be the ultimate solution.

 

[Jimmyz0r]

Guys instead of writing thanks just hit the thanks button in right corner of main post in thread

 

[Mayankraghav]

I am able to unlock the bootloader and flash modem , sbl, etc
Iam just getting error in system, userdata partition
So my emmc is still the same. When i remove the sdcard i am back to qdloader 9800 mode. Only when i insert the sdcard formated with backup.IMG i can get to fastboot.
So how can i format my emmc right ??? So that without sdcard i can fastboot

 

[raaj13]

I am able to unlock the bootloader and flash modem , sbl, etc
Iam just getting error in system, userdata partition
So my emmc is still the same. When i remove the sdcard i am back to qdloader 9800 mode. Only when i insert the sdcard formated with backup.IMG i can get to fastboot.
So how can i format my emmc right ??? So that without sdcard i can fastboot

did you try cm11.bat along with cm11 flashboot files. I formatted mine using it.