[GUIDE] upgrade to wp7 / flash wp7 rom/ downgrade from wp7 to 6.5 WM OS

Search This thread

mirolg

Retired Recognized Developer
Oct 25, 2009
3,241
2,503
how to to wp7 bootloader needed files + miRom 7 radio 0321 as .tsw (if is not rename it to tg01wp_00.tsw)

read this first or if you have problems
tnx avathar

1. make sure your battery are 100% FULLcharged!

2. copy flash the wm6.5 rom with 0321 radio to SD card PRG folder. Copy tg_ssdl.exe + tg_ssdl+.exe in the same folder


3. press on tg_ssdl+.exe to start the download


4. after 20 min. you have wm 6.5.x OS with 0321 radio.


5. Install tg downloader and the 32 bit driver. By first screen check all three rom variants


6. DownLoade Modus1: turn device off, pull battery out/in, then press and hold Camera + Power button (you get white led)


7. Start tg downloader. If you get a error window, press ok


8. connect your device + pc over usb


9. select over browse the file from wp7bootloader folder


10. Start download. on the 99% stay 1-2 min. PLEASE wait the 100% and the auto reboot



NOW you have the wp7bootloader and you able to flash wp7 rom



how to to flash wp7 rom if you allready on wp7 needed files
zip.gif
wp7 rom flash.zip


1. DownLoade Modus2: turn device off,
pull battery out/in, then press and hold Camera + Power button (you get Blue led)

2. Install ZTEiT Common downloader and install the acer f1 driver


3. copy a wp7 rom, flash.bin in wp7OS_files


4. run ZTEiT Common downloader (select multi—download), browse to wp7OS_files folder and
select him (check with advanced if the three files are set)

5. press START all and wait 20 - 28 min.


now you are on wp7 OS (if you like later to flash a other wp 7 rom, do the steps from howto to flash wp7 rom)


Now do this at end FIX 3G /RADIO SIGNAL




from wp7 to wm6 bootloader and flash back
to 6.5 OS

ok i have managed it with few times (today) with succes: Charge your battery 100% full (few hours!)
(if is not possible to charge the battery in the phone read this)

needed TOOLS ( ZTEiT Common downloader, Tg downloader and Toshiba_TSW)

Prepare a 6.5 rom as .bin ROM with Toshiba_TSW browse to your exist 6.5 tsw rom, select Toshiba Tg01, press decode= you get a 6.5 bin ROM (or download my miROM7 Radio 0321as .bin)

1. TOOL ZTEiT Common downloader (get the 6.5 bootloader back- no OS)

1.1 turn the phone off
1.2 pull battery out/in, press Camera+Power button= Blue led go on ,you are on wp7 Download mode
1.3 Connect usb
1.4 run ZTEiT Common downloader (select multi- download) (to use you have to install the ACER F1 driver x86)
1.5 go to browse and select the folder
zip.gif
downgrade_WM6_boot.zip with the needed files
1.6 press advanced to check the selected files NPRG8650.hex, partition.mbn. dbl.mbn,fsbl.mbn,and osbl.mbn
1.7 press start all

after few seconds you got a white led, then close ZTEiT Common downloader, cut the usb connection

1.8 take the battery out (for few seconds) then press and hold the Camera and then the press and hold the Power button= white led go on


2 TOOL tg downloader (flash a 6.5 ROM)

2.1. run tg downloader (if get a error press ok)
2.2. connect your phone over usb- the programm recognize Toshiba download Port com
2.3. select browse your prepared 6.5 BIN ROM (if get a error press ok)
2.4. press Start Download, download starts led changing different colors. on 99% stay a while- but WAIT the 100% and it will reebot

NOW you on 6.5 OS

IT WORKS- BUT: IF the Download not start, try again step 1.8. and 2.1 -2.4
AND if the Download not start, log off/log on your pc and try again step 1.8. and 2.1 -2.4 (if is not possible to charge the battery in the phone read this)

DISCLAIMER

I will not take any responsibility for any damages caused directly or indirectly from using the software-package or the instructions. Read the instructions thoroughly and proceed carefully!
 

Attachments

  • downgrade_WM6_boot.zip
    419 KB · Views: 3,797
Last edited:

Nokser

Inactive Recognized Developer
Mar 18, 2008
3,259
603
35
Warsaw
mcodingset.com
from wp7 to wm6 bootloader and flash back to 6.5 OS

ok i have managed it with few times (today) with succes: Charge your battery 100% full (few hours!)

needed TOOLS ( ZTEiT Common downloader, Tg downloader)

Prepare a 6.5 rom as .bin ROM with Toshiba_TSW.zip browse to your exist 6.5 tsw rom, select Toshiba Tg01, press decode= you get a 6.5 bin ROM

1. TOOL ZTEiT Common downloader (get the 6.5 bootloader back- no OS)

1.1 turn the phone off
1.2 press Camera+Power button= Blue led go on ,you are on wp7 Download mode
1.3 Connect usb
1.4 run ZTEiT Common downloader (select multi- download)
1.5 go to browse and select the folder WM6boot with the needed files
1.6 press advanced to check the selected files NPRG8650.hex, partition.mbn. dbl.mbn,fsbl.mbn,and osbl.mbn
1.7 press start all

after few seconds you got a white led, then close ZTEiT Common downloader, cut the usb connection

1.8 take the battery out (for few seconds) then press and hold the Camera and then the press and hold the Power button= white led go on


2 TOOL tg downloader (flash a 6.5 ROM)

2.1. run tg downloader (if get a error press ok)
2.2. connect your phone over usb- the programm recognize Toshiba download Port com
2.3. select browse your prepared 6.5 BIN ROM (if get a error press ok)
2.4. press Start Download, download starts led changing different colors. on 99% stay a while- but WAIT the 100% and it will reebot

NOW you on 6.5 OS

IT WORKS- BUT: IF the Download not start, try again step 1.8. and 2.1 -2.4
AND if the Download not start, log off/log on your pc and try again step 1.8. and 2.1 -2.4


many thankst to qinwengui for his method/tools/files :cool:
Nice Tut., but qinwengui write only bootloader files *.mbn for *.bin file.
He not find other method upgrade etc.. then i dont understand why you write wrong info.
 

mirolg

Retired Recognized Developer
Oct 25, 2009
3,241
2,503
Nice Tut., but qinwengui write only bootloader files *.mbn for *.bin file.
He not find other method upgrade etc.. then i dont understand why you write wrong info.

I not write a wrong info. exactly so i have do it 4 times, what files/info are wrong? in his folder WM6boot are five files: NPRG8650.hex, partition.mbn. dbl.mbn,fsbl.mbn,and osbl.mbn

you can download it and/or try it :cool:
how write only bootloader files *.mbn for *.bin file?
 
Last edited:
  • Like
Reactions: nikola92

mirolg

Retired Recognized Developer
Oct 25, 2009
3,241
2,503
Because I do not understand, why write some nonsense
I do not want you to thank me, but how can you thank someone who did not.
Believe me a lot of time spent on it all.

is not nonsense. I wanted to be fair to qinwengui;, I have this info + files from his thread:

3. wp7 to wm6 bootloader and flash 6.5 os

Camera+Power(Blue led) ,on Download mode,use ZTEiT Common downloader (select multi—download, not backup)

need file NPRG8650.hex,partition.mbn. dbl.mbn,fsbl.mbn,osbl.mbn
After finished 6.5boot,(Connect the pc Re),then,
Camera+Power Download mode,
dirver is Toshiba Download Port com,
If not, please replace,,
use TG-Downloader,flash the rom for 6.5...

file: http://cn.ziddu.com/download/625316/WM6boot.rar.html

demo video

http://cn.ziddu.com/download/625312/wp7-wm6.rar.html
TOOLS file: http://cn.ziddu.com/download/625313/TOOLS.rar.html

and he don´t write credits or copyright on this stuff- then i thank him .....

and who write partition.mbn. dbl.mbn,fsbl.mbn,and osbl.mbn and the other hounderts fils in your ROM
in your thread you don´t write the credits to other developer/manufacturer or what ...


....AND please don´t spam this IMPORTANT INFO THREAD
 
Last edited:
  • Like
Reactions: maxmobil201

PATITOPATITO

Member
Nov 12, 2009
20
2
Back to 6,5 solved... :)

from wp7 to wm6 bootloader and flash back to 6.5 OS

ok i have managed it with few times (today) with succes: Charge your battery 100% full (few hours!)

needed TOOLS ( ZTEiT Common downloader, Tg downloader)

Prepare a 6.5 rom as .bin ROM with Toshiba_TSW.zip browse to your exist 6.5 tsw rom, select Toshiba Tg01, press decode= you get a 6.5 bin ROM

1. TOOL ZTEiT Common downloader (get the 6.5 bootloader back- no OS)

1.1 turn the phone off
1.2 press Camera+Power button= Blue led go on ,you are on wp7 Download mode
1.3 Connect usb
1.4 run ZTEiT Common downloader (select multi- download)
1.5 go to browse and select the folder WM6boot with the needed files
1.6 press advanced to check the selected files NPRG8650.hex, partition.mbn. dbl.mbn,fsbl.mbn,and osbl.mbn
1.7 press start all

after few seconds you got a white led, then close ZTEiT Common downloader, cut the usb connection

1.8 take the battery out (for few seconds) then press and hold the Camera and then the press and hold the Power button= white led go on


2 TOOL tg downloader (flash a 6.5 ROM)

2.1. run tg downloader (if get a error press ok)
2.2. connect your phone over usb- the programm recognize Toshiba download Port com
2.3. select browse your prepared 6.5 BIN ROM (if get a error press ok)
2.4. press Start Download, download starts led changing different colors. on 99% stay a while- but WAIT the 100% and it will reebot

NOW you on 6.5 OS

IT WORKS- BUT: IF the Download not start, try again step 1.8. and 2.1 -2.4
AND if the Download not start, log off/log on your pc and try again step 1.8. and 2.1 -2.4


many thankst to qinwengui for his method, microsoft, da_g, the half xda comunity for developer tools and nokser .for.other files :cool: ...

Hi miro,
thanks for the info... I just back to 6,5. again. Very clear explanation.:D:D
I use your ROM´:rolleyes:s but I must pass this phone to my wife, and I need a spanish version rom.Can you recommend me a spanish version:eek:. You might know some good Spanish version. There are many of good English one like yours, very fluide, but I must migrate to a Spanish one.

Thanks for your suppport and thanks again for the post.
Br
Patito
 

Godric8

Senior Member
Jan 23, 2011
196
5
i'm in 1,8 state... white led!! but the phone stay in this state for only 5 sec... i think this is the battery...but the battery don't charging in this state... any idea??:confused:
 

aeroflyluby

Retired Forum Moderator
Mar 16, 2009
923
131
29
Rybnik
and what is it? or how can I build it?

---------- Post added at 06:26 PM ---------- Previous post was at 06:14 PM ----------

the phone does not charging because I think it goes in bootloadermode each 3 sec!LED changes from white to red each 3 sec

I will complain it about 5th time...

You cut USB cable, any type, unisolate red and black wires and put red to + and black to - in battery, wait about a minute holding it like this and check, if fails, repeat this cycle until you get battery working.
You can also check battery voltage with voltagemeter, 4.20 is 100%, 3.7 is about 60% and 3.0 is critical state assuming you damaged your cells.
Any overcharging or undercharging (more than 4.20 or less than 3.0) would make your battery funking explode...
 

Godric8

Senior Member
Jan 23, 2011
196
5
ok i resolved the phone work perfect with 6.5 rom!! thanks all for help!!
 
Last edited:

mirolg

Retired Recognized Developer
Oct 25, 2009
3,241
2,503
Hi miro,
thanks for the info... I just back to 6,5. again. Very clear explanation.:D:D
I use your ROM´:rolleyes:s but I must pass this phone to my wife, and I need a spanish version rom.Can you recommend me a spanish version:eek:. You might know some good Spanish version. There are many of good English one like yours, very fluide, but I must migrate to a Spanish one.

Thanks for your suppport and thanks again for the post.
Br
Patito

very nice, patito :)

here my spanish rom miROM 10 SP
and here the ifo thread miROM10_ENG/GER/SPN

cheers, miro
 

PATITOPATITO

Member
Nov 12, 2009
20
2
i'm in 1,8 state... white led!! but the phone stay in this state for only 5 sec... i think this is the battery...but the battery don't charging in this state... any idea??:confused:

Just a tip ...Some might have same behavior.
when you open the tG downloader,The phone model its in the TG01W by defect. Change to TG01C. .You will see in ports option your phone conected to port . Them download.:D
If you leave it in tg01W option , most of the time the phone is detected but as soon as you try to update, it appears not found or port locked.:mad:
I hope this info can help you.
Br

---------- Post added at 08:33 PM ---------- Previous post was at 08:28 PM ----------

very nice, patito :)

here my spanish rom miROM 10 SP
and here the ifo thread miROM10_ENG/GER/SPN

cheers, miro

Hi MIRO,
will download right now...:D:D Concerning The radio version in the file its 1800 already?.What radio version you can recomend me.
landscape scree ok with the tip in the post. Now all ok.


Thaks for the suppport
Patito
 
Last edited:

mirolg

Retired Recognized Developer
Oct 25, 2009
3,241
2,503
Just a tip ...Some might have same behavior.
when you open the tG downloader,The phone model its in the TG01W by defect. Change to TG01C. .You will see in ports option your phone conected to port . Them download.:D
If you leave it in tg01W option , most of the time the phone is detected but as soon as you try to update, it appears not found or port locked.:mad:
I hope this info can help you.
Br

---------- Post added at 08:33 PM ---------- Previous post was at 08:28 PM ----------



Hi MIRO,
will download right now...:D:D Concerning The radio version in the file its 1800 already?.What radio version you can recomend me.
landscape scree ok with the tip in the post. Now all ok.


Thaks for the suppport
Patito

yeeah, very good :). I thik in the re-uploaded miROM 10 SPN ROM (tnx Pere) is my recomanded radio for your region, 1800 radio! 1600 are good foe east europa, 0300 and 0321 for UK

best regards, miro
 
  • Like
Reactions: PATITOPATITO

PATITOPATITO

Member
Nov 12, 2009
20
2
yeeah, very good :). I thik in the re-uploaded miROM 10 SPN ROM (tnx Pere) is my recomanded radio for your region, 1800 radio! 1600 are good foe east europa, 0300 and 0321 for UK

best regards, miro

Hi
I tested today and good reception, so I wont change it.
Thanks my friend.:D
Br
Patito

---------- Post added at 08:06 PM ---------- Previous post was at 07:59 PM ----------

no matter.... normally you can select all three options ...... and if get error- ignore

HiMIRO
In my case, No errors when you open the aplication and load the .bin with TG01W option, but if i press download, it appears locked and the process wont go further.
If i use option TG01 C . when you open the .bin ,the error appears, you ignore it and if i press dowload, the process goes normally. :)
I put the post just in case other people had the same behavior, couse they wont be able to go further (it was my case). They need to use just TG01C option:D

Br
Patito
 
  • Like
Reactions: mirolg

Top Liked Posts

  • There are no posts matching your filters.
  • 16
    how to to wp7 bootloader needed files + miRom 7 radio 0321 as .tsw (if is not rename it to tg01wp_00.tsw)

    read this first or if you have problems
    tnx avathar

    1. make sure your battery are 100% FULLcharged!

    2. copy flash the wm6.5 rom with 0321 radio to SD card PRG folder. Copy tg_ssdl.exe + tg_ssdl+.exe in the same folder


    3. press on tg_ssdl+.exe to start the download


    4. after 20 min. you have wm 6.5.x OS with 0321 radio.


    5. Install tg downloader and the 32 bit driver. By first screen check all three rom variants


    6. DownLoade Modus1: turn device off, pull battery out/in, then press and hold Camera + Power button (you get white led)


    7. Start tg downloader. If you get a error window, press ok


    8. connect your device + pc over usb


    9. select over browse the file from wp7bootloader folder


    10. Start download. on the 99% stay 1-2 min. PLEASE wait the 100% and the auto reboot



    NOW you have the wp7bootloader and you able to flash wp7 rom



    how to to flash wp7 rom if you allready on wp7 needed files
    zip.gif
    wp7 rom flash.zip


    1. DownLoade Modus2: turn device off,
    pull battery out/in, then press and hold Camera + Power button (you get Blue led)

    2. Install ZTEiT Common downloader and install the acer f1 driver


    3. copy a wp7 rom, flash.bin in wp7OS_files


    4. run ZTEiT Common downloader (select multi—download), browse to wp7OS_files folder and
    select him (check with advanced if the three files are set)

    5. press START all and wait 20 - 28 min.


    now you are on wp7 OS (if you like later to flash a other wp 7 rom, do the steps from howto to flash wp7 rom)


    Now do this at end FIX 3G /RADIO SIGNAL




    from wp7 to wm6 bootloader and flash back
    to 6.5 OS

    ok i have managed it with few times (today) with succes: Charge your battery 100% full (few hours!)
    (if is not possible to charge the battery in the phone read this)

    needed TOOLS ( ZTEiT Common downloader, Tg downloader and Toshiba_TSW)

    Prepare a 6.5 rom as .bin ROM with Toshiba_TSW browse to your exist 6.5 tsw rom, select Toshiba Tg01, press decode= you get a 6.5 bin ROM (or download my miROM7 Radio 0321as .bin)

    1. TOOL ZTEiT Common downloader (get the 6.5 bootloader back- no OS)

    1.1 turn the phone off
    1.2 pull battery out/in, press Camera+Power button= Blue led go on ,you are on wp7 Download mode
    1.3 Connect usb
    1.4 run ZTEiT Common downloader (select multi- download) (to use you have to install the ACER F1 driver x86)
    1.5 go to browse and select the folder
    zip.gif
    downgrade_WM6_boot.zip with the needed files
    1.6 press advanced to check the selected files NPRG8650.hex, partition.mbn. dbl.mbn,fsbl.mbn,and osbl.mbn
    1.7 press start all

    after few seconds you got a white led, then close ZTEiT Common downloader, cut the usb connection

    1.8 take the battery out (for few seconds) then press and hold the Camera and then the press and hold the Power button= white led go on


    2 TOOL tg downloader (flash a 6.5 ROM)

    2.1. run tg downloader (if get a error press ok)
    2.2. connect your phone over usb- the programm recognize Toshiba download Port com
    2.3. select browse your prepared 6.5 BIN ROM (if get a error press ok)
    2.4. press Start Download, download starts led changing different colors. on 99% stay a while- but WAIT the 100% and it will reebot

    NOW you on 6.5 OS

    IT WORKS- BUT: IF the Download not start, try again step 1.8. and 2.1 -2.4
    AND if the Download not start, log off/log on your pc and try again step 1.8. and 2.1 -2.4 (if is not possible to charge the battery in the phone read this)

    DISCLAIMER

    I will not take any responsibility for any damages caused directly or indirectly from using the software-package or the instructions. Read the instructions thoroughly and proceed carefully!
    2
    Hi,
    some people have a problem with checksum error while upgrading bootloader.
    After this error ,you can flash wp7rom but windows will not start.
    And you can go back to wm6.5
    I had this problem too. Problem was solved by flashing all files: ENPRG8650.hex, NPRG8650.hex, amss.mbn, apps.mbn, appsboot.mbn, dbl.mbn, dsp1.mbn, fsbl.mbn, osbl.mbn, partition.mbn and chosen flash.bin.

    In your tutorial there are only 3 files flash.bin, NPRG8650.hex, partition.mbn.
    All needed files can be downloaded here:
    http://hotfile.com/dl/148417552/39f77d9/wp7OS_files.zip.html

    You could add this exception in your tutorial.

    You can also add warning that sd card will be formated and encrypted. This is important information for noobies like me, because you lose all data from card and there is a problem to use this card outside the phone and wp7.
    And there is no easy way to remove encryption. For example you can format such a card in nokia with symbian:
    http://forum.xda-developers.com/showthread.php?t=1242071

    Another useful information is how to Use Your Windows Phone 7 Device as a Portable USB Drive. So you could also add link to this small tutorial:
    http://forum.xda-developers.com/showthread.php?t=915664

    At last but not least thanks to all people that enabled wp7 for tg01 :)
    2
    Hi, Could you re-upload the Common Downloader as Megaupload is down? Thanks in advance.

    Here the link for Common Downloader

    Edit : I was late, ha ha ha ;-)
    2
    Hi miro,
    thanks for the info... I just back to 6,5. again. Very clear explanation.:D:D
    I use your ROM´:rolleyes:s but I must pass this phone to my wife, and I need a spanish version rom.Can you recommend me a spanish version:eek:. You might know some good Spanish version. There are many of good English one like yours, very fluide, but I must migrate to a Spanish one.

    Thanks for your suppport and thanks again for the post.
    Br
    Patito

    very nice, patito :)

    here my spanish rom miROM 10 SP
    and here the ifo thread miROM10_ENG/GER/SPN

    cheers, miro
    2
    and what is it? or how can I build it?

    ---------- Post added at 06:26 PM ---------- Previous post was at 06:14 PM ----------

    the phone does not charging because I think it goes in bootloadermode each 3 sec!LED changes from white to red each 3 sec

    I will complain it about 5th time...

    You cut USB cable, any type, unisolate red and black wires and put red to + and black to - in battery, wait about a minute holding it like this and check, if fails, repeat this cycle until you get battery working.
    You can also check battery voltage with voltagemeter, 4.20 is 100%, 3.7 is about 60% and 3.0 is critical state assuming you damaged your cells.
    Any overcharging or undercharging (more than 4.20 or less than 3.0) would make your battery funking explode...