[GUIDE][XESS/XED]Install CM10 with stable baseband(SIM detected). *Updated*

Search This thread

MatsPunt

Senior Member
Sep 15, 2013
989
727
Batcave
Hi,

I decided to update this thread with separate E/E dual links, plus some extra instructions

You'll need an unlocked bootloader for this action. Unlocking the bootloader will result in warranty loss. I will not be held responsible for anything that may or may not happen to your device.

What is the point of this thread? Well, this thread offers you a CM10 for our E with the baseband uknown(SIM not recognized issue) that randomly occurs after a couple reboots(some people like me get it in 3 days, others have never got it).

This CM10 was an update by @jjm34 (OTA 1.1.0). Member @Johnt880 discovered that this update brings a stable baseband. All credits go to him! I merely created E single and E dual versions and Deodexed them! I also replaced the boot.img with @UltraGamerHD his Hades kernel, so you'll get 1,5 gHz OC and some other stuff.

The bugs of this CM10 are:
-Magnetomet not working(no automatic landscape/portrait)
-Video recording doesn't work.
-Video playback doesn't work(no YouTube)
-Bluetooth acts strange(it connects, but refuses to exchange any kind of media)

As you can see that's pretty bearable.

Installation instructions:
1. Download the appropiate ROM for your device. Choose the Odexed or the Deodexed version(easier modding).
2. Download the Gapps(contains Play Store, so pretty important)
3. Place the 2 .zips on your SD card(internal or external, doesn't matter)
4. Flash the boot.img inside the ROM.zip. You can use Flashtool or the Android SDK.
5. Boot into your preferred recovery(TWRP is the most convenient). Blue LED=TWRP. Green LED=CWM.
7. When using TWRP: Wipe cache, dalvik-cache, data and system under ''Wipe'', ''Advanced wipe''
When using CWM: Wipe data(hard reset), wipe dalvik-cache(under ''advanced'') and format system
8. Install zip from SD card>CM10ROM.zip
9. When it's done, install zip from SD card>gapps.zip
10. Reboot system, insert PIN and enjoy your SIM recognized CM10 :D
Little advice: CM10 doesn't give you the option to switch between Wi-Fi and 3G like stock does. So when you insert your G-mail and password, it will use precious data to establish a connection. If this is something you don't want to, just skip the G-mail, skip the creation of a G-mail, and go to ''Settings''>''More''>''Mobile Networks'' and uncheck the data. Now you can enable Wi-Fi and open the Play Store. You will have to insert a G-mail and now you can since you have a wi-fi connection ;)

Downloads:

E single:
-Deodexed: https://drive.google.com/file/d/0B6-n6J0wUrhteURaWS1OcDBhWE0/edit?usp=sharing
-Odexed: https://drive.google.com/file/d/0B6-n6J0wUrhtZVFmaUtQVmZ3ZFE/edit?usp=sharing

E dual:
-Deodexed: https://drive.google.com/file/d/0B6-n6J0wUrhtdy1QS2puMEFadlk/edit?usp=sharing
-Odexed: https://drive.google.com/file/d/0B6-n6J0wUrhtOUJBSjVLXzl5Ym8/edit?usp=sharing

Gapps: https://drive.google.com/file/d/0B6-n6J0wUrhtc0VZVE1ySHBkb0k/edit?usp=sharing

Credits:
@Johnt880 for the discovery of the update.
@UltraGamerHD for his Hades kernel.
@jjm34 for the actual ROM
 
Last edited:

MatsPunt

Senior Member
Sep 15, 2013
989
727
Batcave
Wait, so isn't this just jjm34's rom with hsr0's kernel?

No! It's an update released by jjm34! It's not a standalone ROM! Check the size.

You can flash this when the SIM bug occurs!

What I meant is that I forgot to add hsr0's kernel in the zip!

Hope that's clear.

Mats

Sent from my Xperia E using XDA Premium 4 mobile app
 

TheRealSS

Senior Member
Dec 16, 2013
243
40
No! It's an update released by jjm34! It's not a standalone ROM! Check the size.

You can flash this when the SIM bug occurs!

What I meant is that I forgot to add hsr0's kernel in the zip!

Hope that's clear.

Mats

Sent from my Xperia E using XDA Premium 4 mobile app

Oh, okay, I get it.
 

MatsPunt

Senior Member
Sep 15, 2013
989
727
Batcave
Oh, okay, I get it.

To be absolutely sure(sorry..)

jjm34 and hsr0 both built a CM10 ROM.

We discovered that jjm34's ROM+hsr0's kernel s the most stable for the E single.

BUT on jjm34 his sourceforge page for the E single is an update of 150 mb.

Now, when you are on jjm34 his ROM and hsr0 his kernel, you may experience the SIM bug.

Flashing the update will solve this. When it happens again, just flash the update.

Note: remove the apks in the update that you deleted in the base ROM. Otherwise you will get those apps again. Also, when you modify anything you have to add the files to the update too! Otherwise the system wll be overwritten with stock CM10 and your mods will disappear.

Hope that it's now completely clear! Correct download links will be up in 10 minutes.

Mats
 

Johnt880

Senior Member
Dec 7, 2013
211
51
Dublin
I am sorry for misleading anyone , I just never thought of testing the video,I tested camera and panoramic as they worked. I assumed the video would too
Anyway keep up the good work Many thanks :)
 
  • Like
Reactions: NSDCars5

Grimlock007

Senior Member
Jan 25, 2014
798
186
Cybertron
Is this the full rom?? 155mb? thats a big size for a baseband fix....if its a full rom...this should be advertised as the new cm10 rom for E

---------- Post added at 08:09 AM ---------- Previous post was at 08:07 AM ----------

Video recording not working ...:(
just a gsm fix dude.....
before, if you get this bug you had to flash stock ftf again & then cm10 @MatsPunt someone said flashing xboost (rom only) also fixes the problem..
 

Top Liked Posts

  • There are no posts matching your filters.
  • 9
    Hi,

    I decided to update this thread with separate E/E dual links, plus some extra instructions

    You'll need an unlocked bootloader for this action. Unlocking the bootloader will result in warranty loss. I will not be held responsible for anything that may or may not happen to your device.

    What is the point of this thread? Well, this thread offers you a CM10 for our E with the baseband uknown(SIM not recognized issue) that randomly occurs after a couple reboots(some people like me get it in 3 days, others have never got it).

    This CM10 was an update by @jjm34 (OTA 1.1.0). Member @Johnt880 discovered that this update brings a stable baseband. All credits go to him! I merely created E single and E dual versions and Deodexed them! I also replaced the boot.img with @UltraGamerHD his Hades kernel, so you'll get 1,5 gHz OC and some other stuff.

    The bugs of this CM10 are:
    -Magnetomet not working(no automatic landscape/portrait)
    -Video recording doesn't work.
    -Video playback doesn't work(no YouTube)
    -Bluetooth acts strange(it connects, but refuses to exchange any kind of media)

    As you can see that's pretty bearable.

    Installation instructions:
    1. Download the appropiate ROM for your device. Choose the Odexed or the Deodexed version(easier modding).
    2. Download the Gapps(contains Play Store, so pretty important)
    3. Place the 2 .zips on your SD card(internal or external, doesn't matter)
    4. Flash the boot.img inside the ROM.zip. You can use Flashtool or the Android SDK.
    5. Boot into your preferred recovery(TWRP is the most convenient). Blue LED=TWRP. Green LED=CWM.
    7. When using TWRP: Wipe cache, dalvik-cache, data and system under ''Wipe'', ''Advanced wipe''
    When using CWM: Wipe data(hard reset), wipe dalvik-cache(under ''advanced'') and format system
    8. Install zip from SD card>CM10ROM.zip
    9. When it's done, install zip from SD card>gapps.zip
    10. Reboot system, insert PIN and enjoy your SIM recognized CM10 :D
    Little advice: CM10 doesn't give you the option to switch between Wi-Fi and 3G like stock does. So when you insert your G-mail and password, it will use precious data to establish a connection. If this is something you don't want to, just skip the G-mail, skip the creation of a G-mail, and go to ''Settings''>''More''>''Mobile Networks'' and uncheck the data. Now you can enable Wi-Fi and open the Play Store. You will have to insert a G-mail and now you can since you have a wi-fi connection ;)

    Downloads:

    E single:
    -Deodexed: https://drive.google.com/file/d/0B6-n6J0wUrhteURaWS1OcDBhWE0/edit?usp=sharing
    -Odexed: https://drive.google.com/file/d/0B6-n6J0wUrhtZVFmaUtQVmZ3ZFE/edit?usp=sharing

    E dual:
    -Deodexed: https://drive.google.com/file/d/0B6-n6J0wUrhtdy1QS2puMEFadlk/edit?usp=sharing
    -Odexed: https://drive.google.com/file/d/0B6-n6J0wUrhtOUJBSjVLXzl5Ym8/edit?usp=sharing

    Gapps: https://drive.google.com/file/d/0B6-n6J0wUrhtc0VZVE1ySHBkb0k/edit?usp=sharing

    Credits:
    @Johnt880 for the discovery of the update.
    @UltraGamerHD for his Hades kernel.
    @jjm34 for the actual ROM
    3
    I have to say you were 100 percent in good advice , I had it done in no time at all , I would never thought of that , I was trying to convert to emmc type
    so it would work , Many thanks , and keep up the good work , I cannot thank you enough you're awesome !!
    2
    re-upload the links

    as the user who posted this thread has deactivated his account so the links wont get renewed if you want deodex cm10 have a look here http://forum.xda-developers.com/xperia-j-e/development/e-e-dual-deodexed-cm10-t2444015


    keep calm and call J.A.R.V.I.S
    1
    I am sorry for misleading anyone , I just never thought of testing the video,I tested camera and panoramic as they worked. I assumed the video would too
    Anyway keep up the good work Many thanks :)
    1
    Wait.. camera and panaroma? Those work, it's only video recording.
    @Johnt880 No problems, you are now in my list of people whom I like a lot! By a lot, I mean I'd be star-struck if I met you.