Quote:
instructions by TEAM_CodeFire modified by smaberg and modified again by me
1.) install all windows driver and adb, fastboot files, download and extract LG_Root for appropriate files
http://d-h.st/uO8h
2.) Copy rootedsystem.img into the base of your internal storage.
3.) Enable ADB debugging on your device, Go to Settings > About Phone > Software Information and tap build number until you are presented with "You are now a developer"
Exit back to Settings main screen. In Developer Options enable USB Debugging (Some devices require enabling PTP for debugging to work)
4.) In the root of LG_Root folder start a command prompt, Inside of LG_Root folder hold shift and right click a blank space you should see "Open command window here"
5.) Well that was easy , let's continue (Now that we have the files on our device we want to put our device is download mode)
Power off your device
When the device is powered off, hold volume up and insert a USB cable connected to the PC
Wait for the drivers to install
6.) Let's find which COM port our device is connected to
Double click ports.bat (This will give us the COM port in which our device is connected we are looking for the Diag port)
Let's run Send_Command.exe (It couldn't connect? Make sure you COM port number is correct it varies)
Code:
Send_Command.exe \\.\COM3
7.) in command prompt Type "id" and press enter (no quotes).
You should get back some text starting with "uid=(0)root gid=(0)root". If not, press CTRL-C, and do step 9 again (the application sometimes doesn't respond on the first command).
8.) in command prompt type
dd if=/data/media/0/rootedsystem.img bs=8192 seek=55296 count=529920 of=/dev/block/mmcblk0
9.) After a few minutes of sitting, you should get back a "#" prompt. This indicates the process has finished.
Type "LEAVE" (no quotes) and press enter. Your phone should reboot. DONE!!!!!!!!!!!!!!!!!!!!!!!!!!!
