0000
1111
0625
0652
2801
2700
2701
2702
2603
2504
2405
2306
2207
2108
2009
2889
2600
2800
2900
Current time in military time
Have you solved it? I had the same problem on boot loop on Hyundai logo。I've tried alt, print screen and u, i r etc touch with keyboard.
Sometimes i had an update message with reboot and nothing change (no usb key plugged).
Sometimes i had a weird screen.
Each tile headunit will stick on boot loop on kia logo... View attachment 5067153
View attachment 5067155
How did you fix it,alt, print screen and u didn't workRecovery done with Android previous version, well done.
Now, GPS (tomtom) is not corrected with the software installed on the headunit.
But easytouch and android hack are still valid. So i can used the car everyday with waze, spotify...
How i can push on the SD the previous version (because the dealer has updated the SD card...).
I want to roll back the firmware,but i don't know how to restore the systemRecovery done with Android previous version, well done.
Now, GPS (tomtom) is not corrected with the software installed on the headunit.
But easytouch and android hack are still valid. So i can used the car everyday with waze, spotify...
How i can push on the SD the previous version (because the dealer has updated the SD card...).
Xin hướng dẫn vào
Does anyone know the recipe for engineering mode for the 2021 SantaFe Vietnam?
[sys.mtx.sw_version]: [TMF.VIE.SOP.A08.H.210416]
Hardware is Motrex MT2712.
I tried 7-3-1 2400, it is dealer Mode, but no luck with the engineer mode.
In advance thanks.
Jafangie
Anyone found out more about this "only dealer" mode? Im trying to get into the engineering modeI can enter dealer mode with pass 2400 but how to enter engineering mode? anyone know the password?
7-3-1¿Alguien conoce la receta del modo de ingeniería para el SantaFe Vietnam 2021?
[sys.mtx.sw_version]: [TMF. Rivalizar. Sopa. A08. H.210416]
El hardware es Motrex MT2712.
Probé el 7-3-1 2400, es el modo distribuidor, pero no tuve suerte con el modo ingeniero.
De antemano gracias.
Jafangie
Nice! sadly the password for the nav G40 and G45 files is not ahqltmTkrhk2018@@Hacker Liberates Hyundai Head Unit, Writes Custom Apps
[greenluigi1] bought a Hyundai Ioniq car, and then, to our astonishment, absolutely demolished the Linux-based head unit firmware. By that, we mean that he bypassed all of the firmware update authe…hackaday.com
The non nav unit has now been hacked!!!
I keep trying to follow the guide but cant finish the last step of compiling the zip. Everything is pretty straight forward it seems I hope someone here with a 21 or newer Elantra can do this and upload the firmware. Frustrating to be at the last step and cant finish :-(
Hello, i used to know a program that could crack zip passes but cannot recall its name. Here are a few options you can try though.Nice! sadly the password for the nav G40 and G45 files is not ahqltmTkrhk2018@@
Considering that the password is long, any software will take ages. And there is no files to find partial matches inside this zip, to find a shortcutHello, i used to know a program that could crack zip passes but cannot recall its name. Here are a few options you can try though.
3 Proven Methods to Crack Encrypted ZIP/WinZIP File Password - Windows Password Key
Don't know how to crack ZIP file password? Here are the 3 best ZIP password crackers that you can go for.www.winpasskey.com
Hi,
Does anyone have any dea how to access engineering mode on my i40 Gen4 Unit with software ST.VFIA.EUR.E536.230920? I need to change amp modes but I cant seem to even get the password prompt to appear as of yet. Thanks.
EDIT: I've managed to get the password screen to appear, it was on the storage info screen, 5 taps in the bottom left and then 1 tap in the bottom right, I mustn't have been tapping quite far enough into the corner. I'll have a try at getting the codes from the update file tomorrow and post back with any updates (if there are any).
I'm not afraid of challenges, but sometimes I need a little helpThere was no need to download software from another model!
Now it is already DIFFICULT to repair.
Just purchased a 2022 Telluride SX with the wide screen. Been reading this thread and noticing no one has found a way to get into engineering mode for these newer firmware, right?
I would just like to side load some apps and be able to run them from the Kia main menu.
If for some reason I am incorrect in that there’s no way to side load these newer widescreens then please do let me know. It’s Likely I may have scanned across a post or something that had that info.
Thanks!
Hi guys,
On my Tucson (2018 - AA) I can only access the engineering mode where I don't...
Now that we can sideload apps, is there any way to let Android auto work wirelessly?
Inviato dal mio MI PAD 4 utilizzando Tapatalk