• Introducing XDA Computing: Discussion zones for Hardware, Software, and more!    Check it out!
  • Fill out your device list and let everyone know which phones you have!    Edit Your Device Inventory

Hacks, tricks, news and updates for Wear OS smartwatches (TicWatch, Fossil, Missfit, Skagen, Xiaomi, Oppo, Suunto...)

Search This thread

mind-overflow

Senior Member
Sep 8, 2015
69
29
Varese
Hi, about the PC cable I bought some time ago one of them just to try if works but after modify the exterior I can't connect with my computer... I hadn't got enough time to look around so I'll try again in a short period.
It's weird because I didn't see the TWP3 charging during my tests...

Hello,
I think you shouldn't have any issue. I am holding the cable by hand as shown in the picture, and it works perfectly fine.

IMG_2021-05-16-22-45-05-767.jpg
 

mind-overflow

Senior Member
Sep 8, 2015
69
29
Varese
Ok, I didn't unmounted all the cable just cutted the appendix specific for TW-E.
Thanks for the image
If you're using a TicWatch E cable, unfortunately you'll have to completely disassemble it, because the magnets have the wrong (opposite) polarity compared to the new TicWatch Pro 3 cable. If you try to connect it, you won't be able to, because the magnets will make it extremely difficult to match the position.

I don't know about other cable models however (such as the original TicWatch Pro), so it might be different for those.
 
Last edited:
  • Like
Reactions: gbSung

bernarbernuli

Senior Member
Aug 26, 2010
89
160
Vigo
www.htcmania.com
Most common Wear OS issues and how to fix them (III).


Google notifications and reminders are notified on the phone, but NOT on the watch.

This bug has been occurring for a long time in Wear OS watches, it consists in that all notifications that come from the Google app and that are notified on the phone are not notified also on the watch (Google notifications about news, weather, sports, etc.) nor the reminders that had been created with the Google Assistant (even if they had been created on the watch), it is always notified ONLY on the phone, but not on the watch. If the reminder is created from the calendar it notifies correctly on the watch and on the phone, therefore this error only happens with the Google app and Google assistant, the other third party apps work normally in terms of receiving notifications (WhatsApp, Telegram, etc.)​



Who is affected? All Wear OS watches of any model.​


Solution:

There is currently no official solution from Google, we just have to wait. We can all push the solution through the internal bug tracking system that Google uses, Google Issue Tracker so that Wear OS developers hear our complaints and prioritize solutions to this major bug. Enter the tab of this bug in the tracker and give it a vote by clicking on the star in order to give it notoriety, you can also give your opinion in the issue tab if you think you can contribute something new. I recommend that you enter the tracker, it is currently the most direct way for us to be heard by the developers.​


Workaround:.​

There is a temporary workaround (until Google deigns to officially fix this problem). It is through the app Wear Reminder 2 by Malcolm Bryant (other apps of his among several others are Wear GPS Fix and Wear Installer). What Wear Reminder 2 does is that it replicates Google notifications (news, weather updates, sports...) and reminders that arrive on the phone by also receiving them on the watch. The app is installed on the watch and on the phone as a bridge. You can configure the importance of reminders and notifications (sound, vibration, text-to-speech...), also if you discard a notification on the watch, it is also discarded on the phone, and vice versa. Here a video of how Wear Reminder 2 works.​

 

bernarbernuli

Senior Member
Aug 26, 2010
89
160
Vigo
www.htcmania.com
Most common Wear OS issues and how to fix them (IV)


When you receive missed calls with the watch connected to the phone via bluetooth, the missed call notification is discarded from phone.


Another bug that has been maintained for years, is that when you receive a call that you do not answer (missed call) and the watch is connected to the phone via bluetooth, the missed call notification disappears (is discarded) automatically from the phone and remains only on the watch, if the bluetooth is disconnected (i.e. the phone-watch link is lost) the missed call notification remains on the phone. This is a major bug because it is easy to not realize that someone has called when the notification disappears, being only present on the watch.​




Who is affected All Wear OS watches of any model.​


Solution:

There is currently no official solution from Google, we just have to wait. We can all push the solution through the internal bug tracking system that Google uses, Google Issue Tracker so that Wear OS developers listen to our complaints and prioritize solutions to this major bug. Enter the tab of this bug in the tracker and give it a vote by clicking on the star in order to give it notoriety, you can also give your opinion in the issue tab if you think you can contribute something new. I recommend that you enter the tracker, it is currently the most direct way for us to be heard by the developers.​

Workaround:

While waiting for the official workaround, follow the steps below and you will be able to receive missed calls and it will show the notification on your phone and watch without being automatically dismissed.​
  1. On the watch, go to Settings > Apps & Notifications > App Notifications > Show All> System Apps > Call Manager and uncheck "Missed Calls".
  2. Then go to Settings > connectivity > bluetooth and make sure you have "Listen to phone voice call on watch" checked.
 
Last edited:
  • Like
Reactions: beni008 and gbSung

Gitanitos

Senior Member
Jan 30, 2013
205
51
Valladolid
Samsung Galaxy S10
If you're using a TicWatch E cable, unfortunately you'll have to completely disassemble it, because the magnets have the wrong (opposite) polarity compared to the new TicWatch Pro 3 cable. If you try to connect it, you won't be able to, because the magnets will make it extremely difficult to match the position.

I don't know about other cable models however (such as the original TicWatch Pro), so it might be different for those.
Hello,
This is just what I did. I disassembled and hand modified cutting the excess of plastic around pins then extracted both magnets, checked the correct polarity and mounted again.
Now it works and rest fitted to the watch, however I may pay attention to don't move because the connection isn't be very stable...
I put some images of my cable
 

Attachments

  • 20210518_205843.jpg
    20210518_205843.jpg
    1,006.1 KB · Views: 47
  • 20210518_205858.jpg
    20210518_205858.jpg
    936.9 KB · Views: 46
  • 20210518_210421.jpg
    20210518_210421.jpg
    807.7 KB · Views: 46

Gary_Forth

New member
Jul 15, 2020
3
0
Thank you for amazing job mate! I was reading this thread and tried to install proxy release but without any luck, as all of us I'm using wifi debug, but I think this is not the case. Getting message that there is no emulator found.

Solved!

I had my phone connected in the same time )))


1621477234768.png
1621477310204.png
 
Last edited:

bernarbernuli

Senior Member
Aug 26, 2010
89
160
Vigo
www.htcmania.com
Thank you for amazing job mate! I was reading this thread and tried to install proxy release but without any luck, as all of us I'm using wifi debug, but I think this is not the case. Getting message that there is no emulator found.

Solved!

I had my phone connected in the same time )))

I'm glad it worked, basically it's having the Wi-Fi connection working, you can momentarily disable the bluetooth and it turns the Wi-Fi on.

I am very proud of the Windows app I made and you are trying now but now I use an app for android that I love, it's called Bugjaeger, many will know it, it's not new in the Play Store. Later, or tomorrow I'll upload a post explaining a little bit about the app.
 

fjuniper

Senior Member
Dec 19, 2010
302
97
Bristol
I had a Fossil Gen5 Carlyle and used the Wear Strava app to track runs, syncing with my phone after completion. I have had the TWP3 for a couple of weeks, and having found out here, that the TWP3 needs help to find satellites, I installed Wear GPS and use this before each run.

I find that the run tracking is very inaccurate, missing whole chunks of the route so you just see a straight line joining two points on the map - multiples of these to make up the route. Tracking by the Fossil was much more accurate, to the extent that if I went into a shop (I'm not a hardcore runner 😂), you could almost see which aisles I walked down.

For "the best Wear OS watch there is", this it very disappointing, even if I am otherwise very impressed, especially with battery life having not done any debloating, tweaks to settings or use of Essential mode.

What are other people's experiences with using GPS? Is Wear GPS commonly used? Is there a better way, am I missing something?
 

bernarbernuli

Senior Member
Aug 26, 2010
89
160
Vigo
www.htcmania.com
Interesting apps in the Play Store (II).

More apps that I use and recommend, about Informer I would have to do more tests and check if there is a high battery consumption with the app activated. Those who have been using the app for a long time, what do you think about the battery consumption?


Bugjaeger Mobile ADB: (Download here)

The app is an adb command emulator that can be run from an android phone. Personally the app has become my preferred tool to send and install apps on my watch via apk. You won't need to install any app on the watch to make it bridge like Wear Installer, you just need to connect it via Wi-Fi and that's it, no computer. Also with the app you can do many more things, it is very powerful, I list the most useful to control the watch:​
  • Commands tab: Execute ADB commands or custom shell scripts to control the watch.
  • Log tab: read and export clock message log (logcat).
  • Packages tab: Install/Uninstall Apps, list and filter installed apps, open apps remotely, extract apk files from installed apps and send them to the phone.
  • Screencap tab: Take screenshots and send them to the phone.
  • Device tab: Information and specifications of O.S., CPU, memory, battery and screen.
  • Files tab: Send files from phone to watch (and vice versa), delete files from watch, modify watch file permissions.
  • Backup tab: Backup the watch (and restore it).
To connect and to be able to execute the functions, you only have to do the following:​
  1. On the watch, go to Settings > System > About and tap "Build number" several times until you see a message that says "you are now a developer". Next go to Settings > developer options and enable "ADB debugging" and "Debugging over Wi-Fi".
  2. Make sure both your watch and mobile are connected to the same wifi network, momentarily disable bluetooth on your watch if Wi-Fi is not enabled on the watch. Now go to Settings > Connectivity > Wifi, click on the network you are connected to and write down the IP of your network.
  3. In the Bugjaeger app of the phone click on the plug icon, enter the IP of your network and press "Connect".
  4. When connecting you will see a notification appear on your watch where you have to give permission to link the phone to the watch, so click on "Always allow from this computer". Now in the app you will see the notification "Connected" and you will see the list of apps that are on the watch.
Bugjaeger-EN1.jpg
Bugjaeger-EN2.jpg

.​

Yr (Download here).​

A very cool weather forecast app, the weather service is provided jointly by NRK and the Norwegian Meteorological Institute. It is one of the most popular weather services in the world. At a glance you see day-by-day and hour-by-hour details in the forecast, alternative to the stock weather app.​

yr1.png
.
yr2.png

Informer: (Download here).​

This is an app that improves the way you receive notifications and their management on your watch. The free version allows:​
  • Present instant cards (better than Wear OS notifications) and allow you to reply to messages with a single tap.
  • Give instant replies with predefined messages or by "voice to text".
  • View images received via WhatsApp, Facebook Messenger and Telegram directly on the watch.
  • Receive WhatsApp call notifications.
  • Set notification vibration patterns according to contact.
  • Display notification history and missed calls.
  • You can set the do not disturb time (phone and watch will be in silent mode).
The Premium version (0,99 €/month) also allows you to listen to WhatsApp voice messages, accept WhatsApp voice and video calls (and answer them by voice), adjust the notification font size, among other things. For much more extensive info and tricks enter here.​

Considerations:
  • To receive notifications you must grant permissions to read notifications and storage permission, you must also install the app on the phone and watch.
  • To avoid duplicate notifications (stock and informer), disable stock notifications in the Wear OS app on the phone, go to notifications > Change notifications watch and disable duplicate apps.
informer1.jpg
.
informer1.png

.​
 

bernarbernuli

Senior Member
Aug 26, 2010
89
160
Vigo
www.htcmania.com
Most common Wear OS issues and how to fix them (V)


When using Mobvoi apps to monitor sports workouts and sleep cycles the data is not synced to Google Fit.


mobvoi.png


When you use the mobvoi app for sports workouts, the app does not sync the activities with the Google Fit account even though syncing with Google Fit is enabled in the Movboi app settings (Account > username > Health Info). Also if you now want to activate Google Fit in the "Health Information" it shows a message saying "This app is blocked. This app tried to access sensitive info in your Google account. To keep your account safe, Google blocked this access." Interestingly the Strava and Runkeeper account syncs correctly.​

Who is affected In Spain witch All watches Mobvoi Ticwatch.​


Solution:

In early May, Google introduced new restrictions on being able to read and write data from Google Fit. App developers whose apps access Google Fit data were notified a few months ago that this was coming and that they would have to update their apps, essentially they were related to complying with disclosing new privacy policies to users both within the app and on the corresponding Play Store tab. Mobvoi probably did not apply the necessary updates to the phone app before the May deadline and, as a result, access to Google Fit has been blocked and users cannot authenticate.​

Currently the current version of the Mobvoi app is 3.22.1-1367.602 released on April 29. For now there is no solution, we can only wait for an update of the app that solves this problem, it should not take long.​

mobvoi2-EN.jpg
mobvoi1-EN.png
 
Last edited:
  • Like
Reactions: MilgeS

bernarbernuli

Senior Member
Aug 26, 2010
89
160
Vigo
www.htcmania.com
How to take long screenshots with the Wear Stitch tool.


If you want to take an long screenshot, showing an entire conversation or menu, you can do it with the help of adb and a Python script called Wear Stitch. This tool takes a screenshot, scrolls a bit, takes another screenshot and so on until it reaches the end of the screen. It then performs some image processing to combine the screenshots into one

1366-2000.png

Previous requirements:
  • Install Pyhon on the computer. Download it here.
  • Follow the steps in the "Prepare watch for advanced features" section of the first post.
  • Download the Wear Stitch tool here, and unzip the zip. It is an open source Python script that is available on GitHub.


Steps:
  1. On the computer, open a command window and change to the directory where you saved the wear_screenshot_stitch script.

  2. If you haven't done it yet, install the Pillow library in Python with the following command
    Code:
    pip install pillow

  3. Then enter the following command to connect to the watch. It then accepts a message on the watch that allows the computer to connect.
    Code:
    adb connect IP_of_watch:5555

  4. Now to run the script and be able to make long snapshots, enter the following command:
    Code:
    python ./wear_screenshot_stitch.py --round

Here you have more info to modify the command parameters. If everything went well, the script will start taking screenshots while scrolling the watch screen. When it has a few screenshots ready, it joins them all into a final image which is an long image. The process may take a few minutes.
 
  • Like
Reactions: MilgeS and beni008

bernarbernuli

Senior Member
Aug 26, 2010
89
160
Vigo
www.htcmania.com
Conclusions on the current state of the Wear OS catalog.


catalogo2.png

For some time now, on the Reddit forum there has been uploaded a spreadsheet where all the models (I think) of watches with Wear Os that have been launched on the market since its inception are recorded (and have been recorded). Click here to see it. If it is true that some information is missing, but it gives you a clear picture of how Wear OS has been doing since it launched in 2014. Now that it looks like Wear OS is going to turn around in a few months thanks to its partnership with Samsung I've been taking a look at this log and have come to some quick conclusions. Does anyone draw any interesting conclusions from this database?.
  • Since June 2014 some 125 models of watches have been released.

  • There are 25 brands that are currently launching or have launched watches with Wear OS. These can be structured into 3 groups:
    - Technology companies such as Mobvoi, Huawei, OPPO and Xiaomi.
    - Watch manufacturers such as Fossil, Misfit, Skagen, Casio, Polar and Suunto.
    - Fashion brands such as Diesel and Emporio Armani​
    .
  • Fossil has released 17 models with Wear OS, the last one launched in January 2021, Fossil Gen 5. The watch brands Skagen and Misfit also belong to Fossil, and Fossil also manufactures under license for fashion brands such as Diesel, Emporio Armani, Puma, Michael Korps, Kate Spade NY and Tory Burch so the Fossil group would currently be the manufacturer of 40% of the models of watches with Wear OS that exist in the market.

  • The first watch with Wear OS (Android Wear at the time) was LG G Watch model launched in June 2014, and the first watch with Android Wear 2.0 was LG Watch Sport, launched in February 2017. I don't think this trend will continue, it looks like the first watch with Wear 3.0 will be a Samsung.

  • Interestingly, Samsung launched in June 2014 a watch with Wear OS, Samsung Gear Live, along with LG G Watch, as a presentation to the world of Android Wear at Google I/O 2014 and never again. It focused on its own operating system, Tizen.

  • The vast majority of Wear OS watches have been manufactured with round dial, only a few models such as the Xiaomi Mi Watch and OPPO Watch have been manufactured with a square dial, they are also among the few that carry a custom layer of Wear OS, MIUI and ColorOS respectively.

  • Only 12 watches allow to activate eSIM or NanoSIM and thus have autonomy with respect to the phone to receive internet signal. Some of them are Fossil Gen 5, OPPO Watch, Xiaomi Mi Watch and Mobvoi Ticwatch Pro 3.

  • If I had to choose 1 or 2 of the most representative watches (in my opinion) by each of the top brands it would be:
    - Mobvoi: Ticwatch Pro, Ticwatch Pro 3.
    - Fossil: Fossil Sport, Fossil Gen 5
    - Skagen: Skagen Falster 2, Skagen Falster 3
    - Misfit: Misfit Vapor 2
    - Suunto: Suunto 7
    - Polar: Polar M600
    - Casio: Casio Pro Trek
    - Xiaomi: Xiaomi Mi Watch
    - Oppo: Oppo Watch
    - Huawei: Huawei Watch 2​
 

Top Liked Posts

  • There are no posts matching your filters.
  • 7

    📣
    【TicWatch Pro 3 GPS OTA Announcement】
    📣

    Dear #TicWatchPro3GPS users
    🥰
    , starting from today, you will receive an update shortly. Simply plug your watch on the charging dock, connect the watch to your cellphone via Bluetooth, or connect to the internet via wifi, the update should start in a bit automatically.
    🥳

    -
    Version: PMRB.210624.001
    -
    The roll-out steps:
    👉
    10%: 2021/07/12 08:00
    👉
    30%: 2021/07/13 08:00
    👉
    50%: 2021/07/14 08:00
    👉
    100%: 2021/07/15 08:00
    -
    Release note:
    🥳

    1. Added new exercise modes such as HIIT
    2. Fixed other known bugs
    4
    There is no doubt that the news on Wear OS has changed since the big news at Google I/O in May announcing the joining of forces with Samsung and the future Wear OS 3, since that date have increased ostensibly news, rumors and leaks about everything related to Wear OS. That's good, it is getting attention in the specialized media of something that half a year ago seemed moribund, and that had all the look that Google was going to let die, it seems that not.

    For my part, I have done my bit to make the potential of Wear OS watches visible with tips and info for current and future users, so that they can get the most out of the watch. The watch is not only useful to see the time and put a cool watchface. I think Wear OS deserved a place where they are giving clear and orderly information on the topic. I also take this opportunity to say that it would be great more contributions from the community to give more activity to the thread, I run out of topics to talk about. As I have said before, this is a forum not a blog. As always I welcome any questions, contributions or ideas to discuss.


    How to stay informed about Wear OS

    Anyway, as I said in the first paragraph are times of much news about Wear OS, yesterday just gave good news and bad news, as @bobybc said in previous post "confirmed Wear OS 3 for Ticwatch Pro 3 but it would not be until a year and a bit". To be informed about Wear OS and the different Wear OS watches there are certain known media where they publish first hand news and leaks, which I spread here:

    9to5Google.com - I think it's my favorite, a lot of news and leaks are published here first.​
    XDA-Developers.com - Very interesting, it also publishes firsts about Wear OS.​
    Google Help Community - Wear OS - Google makes official announcements from here.​
    How to solve doubts about Wear OS
    Of course in this forum, and specifically in this thread you can solve any doubt about Wear OS, but there are more places to solve questions.​
    Forums:
    XDA-Developers.com (Wear OS Development and Hacking) - This forum, fantastic but not very active.​
    reddit.com - Wear OS - The U.S. forum is undoubtedly the most active one.​
    Google Help Community - Wear OS - Wear OS Official Forum​
    mobvoi.com - Ticwatch Official Forum​

    Telegram Groups:
    TicWatch Pro 3 GPS LTE and TicWatchGTH - Group with more than 150 members, as any group of this type is chaotic, good place to ask questions and receive a quick answer, although not always satisfactory, actually.​
    Facebook Groups:
    Wear OS - Wear OS public group. More than 1200 members.​
    The Official Mobvoi TicWatch and earphones Group - Private group. Mobvoi makes its official announcements and firmware update notifications here first. More than 6000 members.​
    Ticwatch Pro Community - Public group on Ticwatch with more than 1500 members.​


    Twitter:
    Wear OS by Google - Wear OS official twitter account.​


    These are the forums and group that I know of, do you know of any active Wear OS, Fossil, missfit, skagen or Xiaomi forum or Facebook/Telegram group, or any interesting Wear OS info YouTube channel?
    4
    New update for Ticwatch Pro 3 GPS.


    This update has firmware version PMRB.210624.001.

    Anyone who is not clear on how to update firmware, or even force the update read the explanation in the first post of this thread.


    No details of the update are known yet, I will update the post as soon as something new is known.
    3
    Official tweet by Google :

    Wear OS 3 is coming.
    Find out what it means for you and your smartwatch, here: https://goo.gle/3rFhgxb

    "... We expect our partners to be able to roll out the system update starting in mid to second half of 2022.

    Wear OS devices that will be eligible for upgrade include Mobvoi’s TicWatch Pro 3 GPS, TicWatch Pro 3 Cellular/LTE, TicWatch E3 and follow on TicWatch devices, as well as Fossil Group’s new generation of devices launching later this year... "
    3
    How to send files to watch without Wi-Fi network..

    Sending files to the watch from a smartphone can be done in 2 ways: Via USB cable and via Wi-Fi network, in the case of the Ticwatch Pro 3 you can only transmit files via Wi-Fi network (or make a homemade USB cable).

    It happens that there are times when you are not at home and want to send music to the watch or send an APK file to install it. The solution to this is activating the shared Wi-Fi connection of the phone, and pretend it is your home network.

    1. On the phone, go to settings > Other wireless connections and turn on "Personal Hotspot" (or "Wi-Fi data sharing" or "Wi-Fi Tethering").

    2. Within the Wi-Fi data sharing settings, replace the Wi-Fi network name and password and enter the same name and password of your home Wi-Fi network, this way the watch will connect automatically and you won't need to enter the password on the watch.

    3. Now, on the watch and if you haven't already done so, go to Settings > System > Info and tap "Build number" several times until you see a message that says "you are now a developer". Next go to Settings > developer options and enable "ADB debugging" and "Debugging over Wi-Fi".

    4. Next make sure that both your watch and mobile are connected to the same wifi network, momentarily disable bluetooth on your watch if Wi-Fi is not enabled on the watch. Now go to Settings > Connectivity > Wifi, click on the network you are connected to and write down the IP you will see.

    5. On the phone, install Bugjaeger (if you haven't already) and run it, click on the plug icon, enter the IP of your network and click "Connect".

    6. When connected you will see a notification appear on your watch where you have to give permission to link the phone to the watch, so click on "Always allow from this computer". Now in the app you will see the notification "Connected" and from the app you will be able to send files (Files tab) or install APKs (Packages tab).

    hotspot.jpg
    Bugjaeger-EN2.jpg
  • 21
    Hi, I use and enjoy a Ticwatch Pro 3 watch, and before I had a TicWatch Pro 2020. During this time I have been learning tips for this watch, and some others I knew from when I was playing around with smartphones and I have moved them to the Wear OS world.

    I want to share these tricks and hacks that I know that enhance the experience in this watch, in the same way, I invite you to post:
    • That trick they know, and a novice at this is completely unaware.
    • That super useful application, and that is not the usual one.
    • That hidden function, and that you discovered by chance.
    • That bug still not fixed with a firmware, and you solve it somehow.

    I think it will be interesting for the community, so we will all take advantage of the collective knowledge. I will be compiling the most interesting tips in the initial post, of course mentioning the source.

    Although I tested the tricks on Ticwatch Pro 3, they of course work for any Wear OS watch released as of February 2017 (wear OS 2.0).

    - Mobvoi: Ticwatch C2, Ticwatch S/E, Ticwatch Pro, Ticwatch Pro 3
    - Fossil Gen 5, Fossil Sport...
    - Missfit Vapor X, Missfit Vapor 2
    - Skagen Falster, Skagen Falster 2, Skagen Falster 3
    - Xiaomi mi Watch
    - OPPO Watch
    - Huawei Watch 2
    - Suunto 7
    - Casio Pro Trek
    - and more


    INDEX:

    - How to Transfer files to/from internal storage via Wi-Fi
    - How to use an alternative keyboard
    - How to prepare watch for advanced features
    - App installation Methods on Wear OS
    - How to install apps from the phone (Wear Installer)
    - How to install apps from a computer (ADB commands)
    - Interesting apps outside the Play Store
    - Watch Faces from the Play Store that I like
    - Wear OS watch Accessories
    - How to make a homemade charging and data cable for TWP3​
    - How to stay informed about Wear OS
    - How to solve doubts about Wear OS
    - Interesting apps in the Play Store
    - How to Change Watch resolution
    - Useful ADB commands
    - Speaker drain (Ticwatch Pro 3 only)
    - How Wear OS watches are updated.
    - How to force firmware update (Ticwatch Pro 3 only)
    - Most common Wear OS issues and how to fix them.
    - 'OK Google' does not activate Google Assistant
    - Loses GPS signal, when you get separated from the phone
    - Google Assistant in certain (too many) situations does not work properly.
    - Google notifications and reminders are notified on the phone, but NOT on the watch.
    - When you receive missed calls with the watch connected to the phone via bluetooth, the missed call notification is discarded from phone.
    - All-in-One tool for Windows: Wear OS Tools
    - How to Pair watch with another smartphone / Tablet without factory reset.
    - Easter Egg in Wear OS
    - How to troubleshoot boot problems. Bootloader Mode and Recovery Mode
    - Functionality of Ticwatch Pro 3 buttons (Ticwatch Pro 3 only).
    - Measures to extend the battery life of watch.
    - How to disable watch bloatware. Mobvoi applications. (Ticwatch Pro 3 Only)
    - How to use Google Pay with unsupported banks.
    - How to use Google Pay in unsupported countries
    - How to take long screenshots with the Wear Stitch tool.
    - Conclusions on the current state of the Wear OS catalog.
    - How to send files to the watch without Wi-Fi network.
    - How to follow a hiking route from your watch with ViewRanger app


    divider-2461548-960-720.png



    How to transfer files to / from internal storage

    At least with the TicWatch Pro 3, you can only stream music to the watch (to listen to it offline) wirelessly and there is no official way to do it. It is strange considering that it has 8 GB of internal storage. As a curiosity to say that the charging cable of the Ticwatch Pro 2020 also serves to transmit files as if it were a common USB cable.

    How to do it? It is possible to remotely access the watch from your computer or from your smartphone wirelessly, in this case using the FTP protocol. You can copy the files that you have saved in the internal storage of the watch to the computer, or send files from the computer to the watch, such as music, videos, texts, etc. The only requirement is that both devices are connected to the same Wi-fi network.


    To do this you have to follow the following steps:

    1. Download from the Play Store and install the NavExplorer application on the watch.

    2. Open the application (1st picture) and go to the top menu, click on the Wi-Fi icon (2nd picture).

    3. It shows you an address with the structure: ftp://watch_ip:2122/. This activates FTP server.

    4a. If you want to access from the computer to the folders of the watch, open the Windows explorer, and in the upper part of the window, in the folder path write the address of point 3.

    4b. If you want to access from smartphone use an advanced file manager, for example Solid Explorer. Open the application, select Storage manager > '+' > FTP, and follow the instructions, basically put IP address and the port number, which is 2122.

    Nav-Explorer1.png
    Nav-Explorer2-en.png


    divider-2461548-960-720.png



    How to use an alternative keyboard

    One of the most uncomfortable functions in the smartwatch is Having to use the keyboard on a 1.4 inch screen. You rarely need to write something from the watch, at least I do, but sometimes it happens, like when an app asks to log in with a username and password. Typing from the watch's built-in keyboard is tormenting. Smartwatches are not designed to answer messages, although of course it is possible.

    To solve this problem there are applications like AOSP WIFI Keyboard that allows you to link the keyboard of your Computer to the watch by using the local Wi-Fi network, so that the computer keyboard can be used to type on the watch. The only requirement is that both devices are connected to the same Wi-Fi network .

    To link the keyboard and start using this typing option, follow these steps:

    1. Download the application here and install it on the watch. The application is in the Play Store, but since it is not an application optimized for WearOS, you will not find it from the watch's Play Store search engine.

    2. Once installed go to Settings > Personalization > Input methods > Manage keyboards , and activate the option AOSP Wifi Keyboard.

    3. Now when you want to use Wifi Keyboard, press and hold the keyboard icon in any text input field and select AOSP Wi-Fi Keyboard.

    4. Open your computer's browser, and type 'http://watch_ip:7777', for example, http://192.168.1.92:7777. A web page will open from which to write, and each time you press ENTER the text will be transmitted to the watch.


    Note 1: If you don't know how to install apk files like the one in point 1, go to section 'Install applications from a computer (ADB commands)'.​

    Note 2: The smartwatch IP is obtained in the Wi-Fi settings. Pressing on your Wifi network.​

    Note 3: To go back to the previous keyboard, just do step 3.​

    keyboard-EN.png


    teclado4.png


    divider-2461548-960-720.png



    How to prepare watch for advanced functions

    What you are doing with the following steps is enabling the watch to receive instructions via ADB. The ADB stands for Android Debug Bridge. As its name suggests, it is a tool through which the command console of our computer will act as a bridge between it and the phone. Thanks to it, we can send commands to the phone, such as install applications, take screenshots, etc.

    1. On your computer, download and install the ADB tools, such as 15 seconds ADB Installer.

    2. On the watch, go to Settings > system > About and repeatedly tap ' Build number ' until You see a message that says 'You are now a developer'. Then go to Settings > developer options and enable 'ADB debugging' and 'Debugging over Wi-Fi '.
    developer-EN.png


    divider-2461548-960-720.png



    App installation methods on Wear OS.

    Currently in Wear OS there are three methods for installing apps on the watch, of which the second method will be blocked by Google as of March 10, 2021, although there is already a workaround for this:

    1. The first method is the obvious one, that is, through the Play Store of the watch, you search for the app you are interested in, install it and that's it. In the watch's search engine only apps optimized for Wear OS will appear, the same as if you search on your phone, apps exclusively for Wear OS will not appear.

    2. The second method is installing the apps from the phone, using an app called "Wear Installer" which will act as a bridge between the phone and the watch. This application filters the applications installed on the phone (or simply downloaded to the internal memory) that contain the app optimized for Wear OS. When you choose to install, it sends it over Wi-Fi and installs the Wear OS-specific module that is contained within the phone app. In the section "Install apps from the phone (Wear Installer)" I explain how to install it.

    3. The third method, is installing the apps from a computer and through ADB commands, I explain this method in the section "Install apps from a computer (ADB commands)". To facilitate the matter you can use this application All in One for Windows that automates the process, in the section "All-in-One tool for Windows, Wear OS Tools" I explain in more detail.

    Apps-on-our-phone.png


    divider-2461548-960-720.png



    2nd Method. Install apps from the phone (Wear Installer).

    This method should be used when you want to install from the phone applications that are not hosted on the Play Store, however these apps must be optimized for Wear OS. The steps for installing and using Wear Installer are as follows:


    1. On the phone, download Wear installer here and install.

    2. On the watch, open Play Store and click on the "Apps on your phone" option.

    3. There you should see the "Wear installer" app. Finally install it.

    4. On the watch enable debugging, to do this go to Settings > system > About and tap several times "Build number" until you see a message that says "you are now a developer". Next go to Settings > developer options and enable "ADB debugging" and "Debugging over Wi-Fi".

    5. On the phone open "Wear installer" app and press OK. You will see 2 tabs, the first one is the list of all the apps installed on your phone, and the second tab is the list of the apps you have downloaded to the phone (apk files) and found in the "Download" folder.

    6. Select the app you want to install on the watch, it must have the Wear OS apk inside for it to be installed. Accept the debugging on the watch and Wear Installer will extract the component, send it and install it on the watch.

    Wear-installer-EN.png


    divider-2461548-960-720.png



    3rd Method. Install applications from a computer (ADB commands)

    This method should be used when you want to install from your computer applications that are not hosted on the Play Store. With this method you could install any android application whether it is optimized for Wear OS or not. The steps for Windows environment are as follows:

    1. If you have not done so yet, follow the steps in 'Prepare watch for advanced functions '.

    2. On your computer, open a command window, to do this in Windows type 'cmd' in the toolbar.

    3. Then enter the following command to connect to the watch. Then accept a message on the clock that allows the computer to connect.
    Code:
    adb connect watch_ip:5555


    4. Now, it is the step to send the apk application to the watch in the first command and install it in the second. Make sure to enter the path correctly in the following commands.
    Code:
    adb push filename.apk /sdcard/
    
    adb -e install filename.apk


    divider-2461548-960-720.png



    Interesting apps outside Play Store.

    Now that you know the different methods for installing apps I'm going to recommend several apps that are outside the Play Store servers, and explain which is the proper method to install them:

    Wear Text: (Download here). (Installation method 2)
    Wear Text is an app for making phone calls or sending a text or WhatsApp message using voice commands. Currently (and for a long time now) Google Assistant does not allow you to do this and hasn't fixed it either.​
    Installation and configuration:
    1. Download and install Wear Text on the phone. Then install the watch version of the app using Wear Installer or Bugjaeger.
    2. Open the app on the phone and accept the permissions to manage calls and SMS messages. Once inside the app enter the name of a contact with one word, followed by a comma and the phone number without spaces (you must include the country code). If you want to send messages to certain contacts, preferably whatsapp messages instead of SMS messages, include the letter "W" after the phone number. As an example, it would look like this: Susana,+34666123456:W.
    3. If the language you speak is not English, set in your own language the word "call" in the option "Set Call Word" found by pressing the 3 dots in the upper right corner.
    4. On the phone, set your watch as a trusted device for smart lock and grant accessibility access to Wear Text. This way you will be able to send WhatsApp messages using Wear.
    5. Finally, press "Save" and you're done.
    How Use:
    The idea is that you can assign the app to a physical button (I recommend the Button Launcher app for the possibilities it offers you) and then open other apps by just saying its name.​
    1. Launch the Auto Text app on the watch. You can assign the app to a physical button (I recommend the Button Launcher app for the possibilities it offers).
    2. If you want to send a message say a sentence like "Susana I will be home in 30 minutes. As in that contact the "W" mark was included the message will be sent by Whatsapp.
    3. If you want to initiate a call , say "call Susana"
    Considerations:
    • Note that once installed on your watch, Wear Text changes its name to Auto Text, which is easier to name it for voice recognition.
    • Before putting your contact names and numbers in the phone app, delete all the sample text that is already there.
    • To send whatsapp messages the screen must be enabled and unlocked, so to do that automatically you need the watch to be set as trusted device in Smart Lock and enabled accessibility permissions in the phone settings.
    • The phone needs Internet access to be able to parse the voice command on the watch (either wifi or mobile data).
    • On Xiaomi Phones it seems that Google Smart Lock does not work for WearOS devices, therefore Wear Text will not be able to activate the phone to send WhatsApp messages or make phone calls.
    • Especially if the language you speak is not English, the voice recognition on your watch may not recognize the contact's name correctly. If this happens try changing the contact's word to something more easily recognizable.
    • In recent months the Google Assistant function to launch an app by saying "Open (app name)" has also been "capped". I recommend customizing a physical button to launch Wear Text (Auto Text), or configuring it from the "Button Launcher" app. You can also launch the app from Wear Voice Opener which would be an alternative solution while waiting for the official one. This app is described below.

    wear-text.jpg

    Fit Strength Training: (Installation method 2)

    Update May 11, 2021: Unfortunately, the latest Google Fit update has broken this solution. Google has completely removed the old strength training code.​

    Application that restores the strength training functionality (weight machines, dumbbell exercises...) that was removed from Google Fit for Wear OS in November 2020. This functionality very accurately detected repetitions and automatically recognized the exercise you were performing based on the repetitive motion you were performing. It was also possible to time the rest times between sets. Now the new Google Fit, for strength training, is only limited to track heart rate and cardio points, also showing on screen the time and the stopwatch. More info about this.​


    strenght-training.png


    Alti-Barometer: (installation method 2 and 3)

    Application that collects every 5 minutes the atmospheric pressure and altitude in real time. It also shows a graph of the atmospheric pressure and altitude of the last 6 hours and notifies in case of possible storm in the place where you are according to the acquired meteorological data.​


    Alti-barometer.png


    AOSP WIFI Keyboard: (installation method 3)

    Application with which you can write on the watch from the computer, I explain in detail in the section "Using an alternative keyboard" of first post. This app was not created for Wear OS, but it is fully functional.​



    Spotify Lite MOD: (installation method 3)

    Spotify Lite is a reduced version of the official application in terms of size and features, however it is only intended for android phones. This version is modified and adapted to small screens such as watches with Wear OS and also, unlike the official version of Spotify for Wear OS, you can play music without depending on having the official app on the phone. It is not a player to listen to music that you have inside the watch, only to listen to streaming music.​

    Download here. The latest published version is based on Spotify Lite v1.5.84.89.​


    How to install them on the watch:

    • The applications that are indicated to be installed ONLY with the second method of the three methods currently available is because the specific component for Wear OS is inside the specific application for the phone, it is explained how to install from that method in the section "Install applications from the phone (Wear Installer) of first post, for now you can also install from the official way of the 2nd method.

      1. From the phone, click and download from the links of each app (only those that are for the 2nd method), and install.
      2. On the watch, open Play Store, and click on the "Apps on your phone" option.
      3. There you should see the app you installed on the phone. Finally you install it and that's it

      It is not useful to install these applications from third method because if you do it, the version for the phone will be installed on the watch.

    • The applications that are indicated to be installed ONLY with the third method are those that are NOT optimized for Wear OS because they were created for phones, but work without problems on the watch. It is explained how to install from that method in the section "Install apps from a computer (ADB commands)" of first post.

    • The apps noted that can be installed interchangeably with the second or third method are those that are optimized for Wear OS.

    Why are they not on the Play Store?

    Because Google does not approve this kind of apps, for example, Fit Strenght trainig recovers a function that google removed (I still don't know why).


    divider-2461548-960-720.png



    Watch Faces from the Play Store that I like

    When it comes to customizing your watch the watch face you display on the screen is of utmost importance. It should fit your personal style, display the information most important to you and look good. Personally I like watch faces that have a clean, minimalist style and are easy to use, and at the same time are functional and I can customize them with the complications I use the most. There are many in the Play Store these are the ones I like the most and that more than meet the conditions outlined above, and all are free.

    Note: Complications are the non-interactive widgets that are implemented inside the watch faces, for example, a distance traveled indicator is a complication.

    Looks Watch Faces (Download here).​
    It is a collection of 9 types of watch faces for different tastes and daily needs. You can fully customize the complications. Personally I like the Portions and Quoti models the most.​
    looks.png

    Moods Watch Faces (Download here).​
    Another collection of watch faces from the same developer that Looks for different styles and same level of customization.​
    moods.png

    A/D Watchfaces (Download here)​
    It is characterized by combining an analog watch with a digital watch. It supports up to four complications, You can configure the font and colors, also has several numerical designs.​
    AD-Watchface.png

    Pixel Watch face - Minimal pixel style watch face (Download here)​
    Minimalist design, optimized for the greatest possible energy savings.​
    pixel-watch-face.png



    How to install Watch Faces on the watch:

    From the watch
    :

    1. Open Play Store, search for the watch face and press install.​
    2. Press and hold the current watch face and swipe to the right until you see "add more watch faces".​
    3. Select the new watch face and customize it​
    .


    From the phone:

    1. Make sure the phone is connected to the watch.​
    2. Open Play Store on the phone, search for the watch face and press install.​
    3. In a few seconds the watch face will appear on the watch, and finally customized​


    divider-2461548-960-720.png



    Wear OS watch accessories


    accesorios1.png


    There are few types of accessories for watches, these are reduced to protective items (screen protector and case cover), charging items (cables and charging docks) and straps.
    • Screen protector: Consists of protecting watchface by resisting scratches and accidental bumps. These protectors can also prevent fingerprints or grease or dust stains on the dial. The ones that offer the best protection are those of tempered glass with 9H hardness.

    • Case cover: This is a flexible TPU protective case to protect the bezel and case of the watch from scratches and possible shocks.

    • Charger cable: Unlike android smartphones where the cable is the same for all models (microusb or USB type C) the same does not happen in smartwatches where each model has its own connector on the charging cable, even within each brand, for example, the Ticwatch Pro charging cable does not serve to charge the Ticwatch Pro 3.

    • Dock (charging base): It is basically a charging cable with a support where the watch is supported. They usually have a minimalist design that will look good on any desk or nightstand.

    • Strap: Replacing the strap is to give a complete facelift to the watch, a good combination can give a touch of extra style to your watch, in the market there is a lot of variety because most of the models allow to replace the strap with another as long as they have the same width. Below I put a table with the width that corresponds to each model of the most notable watches, for example, Ticwatch Pro 3 supports 22mm straps. Within the types of strap, by the material with which they have been manufactured you can find leather straps, imitation leather, stainless steel, titanium, platinum, silicone, resin, rubber, textile, nylon and ceramic.

    Band-Table-JPG.jpg


    Where and how to search for a watch accessory?

    The Asian market such as AliExpress is the one where you can find the widest variety of accessories with the best price, on Amazon you will also find accessories but as a general rule although you will receive the product before they are more expensive.​
    To search for a particular accessory and narrow the search to the maximum, just type in the search box of AliExpress, Amazon or even Google accessory name + watch model. In the case of straps you only have to write the width of the strap, you can even include the type of strap material to narrow down much more what you are looking for.​


    Accessories for Ticwatch Pro 3



    Bonus Track. How to make a homemade charging and data cable for Ticwatch Pro 3

    The official TW3 charger cable unusually only charges (it has 2 pins that only serve to charge the watch), it does not sync data unlike the Ticwatch Pro, Ticwatch S or Ticwatch E that its official charger cable has 4 pins (2 for charging and 2 for data transfer). For most users this will never become a problem, since sending music and files to the watch can be done without problems via Wi-Fi, however, there is something that can ONLY be done via USB cable, and that is to unlock the bootloader (previous step needed to root). Currently the way to root has not been discovered, although there are already users researching a way to get it and when you get the way a data cable will be required. Curiously there is still no such cable for sale for the TW3 that I know of, not even on AliExpress.​
    There are users who have managed to make a homemade cable using the Ticwatch S/E cable as a base. Here is the explanation provided by @Gitanitos for those who want to try:​
    1. Purchase a Ticwatch S/E charger cable, you can get it on Amazon or Aliexpress without any difficulty, here a link to purchase.

    2. Open the Ticwatch S/E charger cable housing by cutting the plastic around the pogo pins, this way you will lower the profile of the housing so that the pins "reach" the watch.

    3. Remove the magnets that are glued to the case and place them on the reverse side. This is because they do not match the polarity of those of the TW3 clock and if you do not change them you will not be able to place the clock because the reverse attraction will prevent you from placing it on top of the pins.

    cable-casero.jpg


    divider-2461548-960-720.png



    How to stay informed about Wear OS.

    To be informed about Wear OS and the different Wear OS watches there are certain known media where they publish first hand news and leaks, which I spread here:

    9to5Google.com - I think it's my favorite, a lot of news and leaks are published here first.​
    XDA-Developers.com - Very interesting, it also publishes firsts about Wear OS.​
    Google Help Community - Wear OS - Google makes official announcements from here.​
    How to solve doubts about Wear OS.

    Of course in this forum, and specifically in this thread you can solve any doubt about Wear OS, but there are more places to solve questions.

    Forums:

    XDA-Developers.com (Wear OS Development and Hacking) - This forum, fantastic but not very active.​
    reddit.com - Wear OS - The U.S. forum is undoubtedly the most active one.​
    Google Help Community - Wear OS - Wear OS Official Forum​
    mobvoi.com - Ticwatch Official Forum​

    Telegram Groups:

    TicWatch Pro 3 GPS LTE and TicWatchGTH - Group with more than 150 members, as any group of this type is chaotic, good place to ask questions and receive a quick answer, although not always satisfactory, actually.​


    Facebook Groups:

    Wear OS - Wear OS public group. More than 1200 members.​
    The Official Mobvoi TicWatch and earphones Group - Private group. Mobvoi makes its official announcements and firmware update notifications here first. More than 6000 members.​
    Ticwatch Pro Community - Public group on Ticwatch with more than 1500 members.​


    Twitter:

    Wear OS by Google - Wear OS official twitter account.​
    12
    All-in-One tool for Windows, Wear OS Tools

    I made a little program with tools for Wear OS, well, actually it is a simple batch that I coded and then converted to an executable file, I had not write code for MS-DOS for 25 years, I still remembered something. I think it can be useful for everyone.

    What does it do?

    It is an All-in-One tool for Windows and that makes it easy to do certain things with the watch, some of which I have told in the first post, such as:

    - Send files as mp3 to the watch, or download files contained in the watch.
    - Install applications
    - Use the computer keyboard to write on the watch.
    - Change the size of the screen
    - Take screenshots of the watch screen, and send it directly to the computer.


    Requirements

    - Windows O.S
    - Have ADB drivers installed. Here is link to download.
    - Connect the watch and the phone to the same Wi-Fi network.
    - Activate in the watch the debugging through Wifi. Follow the steps in the section "Prepare clock for advanced functions" in the first post.


    Where to download?


    Evidently it is only for Windows. It is a first version, so I suppose there will be something to polish, let me know.

    Another thing, I have passed it through VirusTotal and it has given me false positive in some of the 60 antivirus that happens, fortunately of the unknown ones, I do not know why this happens. I was reading about it, I think it is because of the type of compression that is done when passing from bat to exe and some rare antivirus detects it as a trojan.


    Wear-OS-Tools1-en.png


    Wear-OS-Tools2-en.png


    divider-2461548-960-720.png



    How to pair watch with another smartphone / Tablet without factory reset.

    If you've ever wanted to pair your watch with a new smartphone or tablet, or simply upgraded your phone to a new Custom ROM, you've probably noticed that Google doesn't make it easy to pair again. The official Wear OS way requires unpairing the watch from the WearOS App and then resetting it to factory settings (which means deleting all data and apps installed on the watch), and from there* you can see the new device to pair (more info on this, here), however, there is a simple way to avoid resetting the watch to zero settings.

    1. If you have not already done so, follow the steps in the section "Prepare watch for advanced functions".

    2. On the computer, open a command window, for this in Windows type "cmd" in the taskbar.

    3. Then enter the following command to connect to the clock. Accept then a message on the clock that allows the computer to connect. The watch IP is obtained in the Wi-Fi settings. Click on your Wi-Fi network.
    Code:
    adb connect IP_of_watch:5555

    4. Now, enter this command to clear data from Google services. On reboot it will automatically re-sync your personal data with the servers, the only thing I have detected that you have to configure manually is Google Pay (I guess for security issues), but come on, it's a 1 minute process.
    Code:
    adb shell pm clear com.google.android.gms && reboot

    5. Once rebooted, connect the phone again with the first command and enter the second command where the Bluetooth of the watch is requested to be discoverable, the phone can then find the watch and pair it.
    Code:
    adb connect IP_of_watch:5555
    
    adb shell am start -a android.bluetooth.adapter.action.REQUEST_DISCOVERABLE


    divider-2461548-960-720.png



    Easter egg in Wear OS


    There is a hidden Google app, an Easter egg, inside Wear OS, it has been named "Wear OS drum machine". To get to the easter egg you have to do the following:

    1. Open the flashlight app, and turn flashlight off.

    2. Tap twice quickly in the center of the screen, and on the second tap and hold the screen. Instead of lighting up with white, the screen should now show a few seconds of different flashing colors (if you lift your finger it won't work) and a circle grid will appear next, which is a music sequencer.

    A grid of dots is displayed allowing marking with bass drum, snare, bell and cymbal hits, just mark the different hits in the sequence to create complete drum rhythms. It should be noted that the beat is fixed at 135 BPM and cannot be changed.

    • Bass Drum: blue circles
    • Snare drum: turquoise circles
    • Bell: purple circles
    • Cymbals: Red circles

    huevo-de-pascua.jpg





    divider-2461548-960-720.png



    How to troubleshoot boot problems. Bootloader Mode and Recovery Mode.

    In addition to the normal boot, there are two other system boot modes. Bootloader or Fastboot mode and Recovery mode. Both modes can be entered through combinations of the physical buttons or by using adb commands. Knowing these boot methods can save you from a tricky situation where, for example, the screen is unresponsive or the watch is locked.

    Bootloader mode can be entered by simultaneously holding down the 2 buttons until you feel a vibration, about 8 seconds and it will reboot into that mode, I don't know what the procedure is with 1 or 3 button watches. Recovery mode can be entered from the options offered in Bootloader mode.

    You can also enter these 2 modes from a command line by typing "adb reboot bootloader" or "adb reboot recovery". Follow only the first 4 steps to enter these modes in the section below where I explain how to unlock the bootloader.

    Modo-Bootloader.png
    -
    Modo-recovery.png


    What is the Bootloader.

    The Bootloader is like the BIOS on a PC computer. It is the first thing that is executed when the clock starts, from there the instructions to boot the kernel of the operating system are launched. The manufacturer, in this case, of the watch, usually keeps this bootloader locked as a security measure, and it is basically to make sure that only the version of the operating system that he has created can be booted.

    However, many watches (and Android devices) can be unlocked so that custom firmwares can be installed or the device can be rooted. For now, this is not the case for the Ticwach Pro 3 as no effective way to root it has yet been discovered and no custom ROM has been created; however, on the Ticwatch Pro there is a lot more movement, and in fact there is a thread in forum where they explain how to flash an interesting custom ROM and root the watch, basically flashing from bootloader mode through the command line with ADB instructions. During the half year that I used this model I had flashed this ROM, it was clearly perceived a greater fluidity and a significant improvement in battery life. I recommend it for those who have enough knowledge to do it, I must say that if you unlock the bootloader, except in rare cases, you lose the warranty, as this is a deep modification in the software. In fact, some android devices (I guess Wear OS watches too) have security mechanisms so that, even if we close the bootloader again, there is a record that this was previously opened, and with this data would be enough to not provide warranty. On the other hand, when you unlock the bootloader, it resets the watch to factory state (factory reset) so your personal settings and apps that you had installed will be deleted, since important changes are made in the way the watch manages the boot.

    In short, if you want to customize your watch as much as possible, unlocking the bootloader is a good option. On the contrary, if you want to use the original firmware and not take risks, it is better to leave it locked, to make sure that there is nothing "strange" at the level of deep system modifications. I reiterate that with the Ticwatch Pro 3 little you can do (for now) with the bootloader unlocked, in other watches for sure this is more advanced.



    How to unlock the bootloader

    1. If you haven't done it yet, follow the steps in the "Prepare watch for advanced features" section of the first post.

    2. On the computer, open a command window, for this in Windows type "cmd" in the start bar.

    3. Then enter the following command to connect to the clock. Accept then a message on the clock that allows the computer to connect.
      Code:
      adb connect IP_of_watch:5555
    4. Now, it is the step to reboot the clock in bootloader mode.
      Code:
      adb reboot bootloader

    5. Already from bootloader mode will not work debugging via Wi-Fi, as the watch in this mode does not connect to the Wi-Fi network, it will only work with a USB cable. If you have already plugged in the cable, run any of the following commands (whichever works) to unlock the bootloader on your Wear OS watch.
      Code:
      fastboot oem unlock
      
             OR
      
      fastboot flashing unlock

    6. Press the top button on the watch to accept the bootloader unlock request, the watch will be formatted and rebooted back into bootloader mode. On the bottom line on the bootloader screen you should read "unlocked:yes" . Now you can reboot your watch in normal boot using the following command:
      Code:
      adb reboot


    What can you do in Bootloader Mode?

    Besides unlocking the bootloader, to root the watch and/or flash another ROM, from this mode you can choose several options. You scroll with the lower button and choose with the upper button.
    • Recovery Mode - Logically enter recovery mode.
    • Boot to FFBM - Factory Boot Mode. Resets the watch to factory settings although I didn't notice any difference compared to a normal boot on the Ticwatch pro 3.
    • Enter Ship Mode - This is a low power state that prolongs battery life and protects the battery when there are extended periods of non-use. It appears to be used by the manufacturer in the stage prior to sale and shipment to the end user. You exit this state by pressing and holding the top button.
    Also at the bottom of the screen it shows key watch information such as the bootloader lock status or the serial number of the watch. Also, from bootloader mode you can use ADB commands like "fastboot format userdata" to do a factory reset, or "fastboot format cache" to clear the clock cache.



    What is and what can you do in Recovery mode?

    Recovery mode is exactly what its name suggests, recovering the system in case of problems. Actually it is similar to Download mode, however the goal of Recovery mode is to fix problems with the system, Download mode is more focused on changing the system completely by flashing another ROM for example.

    Recovery mode is entered from Download mode, once you have rebooted you will see an exclamation mark on the screen, press and hold the top button while swiping the screen with your finger from bottom to top. You will then see the Recovery mode with several options, you scroll the same as in Download mode, in this case it is also enabled touch scrolling. From the options I highlight "Wipe data/Factory Reset" and "Wipe cache partition" to remove personal settings and leave the watch as factory default, techniques that can solve some problems with the watch.




    divider-2461548-960-720.png



    Functionality of Ticwatch Pro 3 buttons.


    Buttons.png


    Wear OS devices predominantly use the touch screen for interaction, but physical buttons can also be used. Below I list the default functions of the Ticwatch Pro 3 buttons.


    From normal mode:

    - Top button short press (from essential screen): Activates AMOLED screen.​
    - Top button short press (from AMOLED screen): Opens app drawer.​
    - Top button long press: Activates Google Assistant.​
    - Top button double press: Increases screen brightness to maximum.​
    - Bottom button short press: Activates the application of your choice.​
    - Bottom button long press: Activates menu with different functions, such as speaker drain water, switch to essential mode and reboot/shutdown.​
    - Bottom button double press: Activates Google Pay (in countries that support it).​
    - Top button and Bottom button (simultaneous) long press: Take screenshot.​
    - Top button and Bottom button (simultaneous) long press (+ than 8 seconds): Reset in Bootloader mode.​
    .

    From Essential mode (low power mode):

    - Top button short press: Turn on/off display backlight.​
    - Top button long press: Reset watch.​
    - Bottom button short press: Measures heart rate.​

    Also with the help of a third party app, Button Launcher, you can increase the functionality of these buttons, and you can program them to activate the apps or functions you want depending on the combinations of short presses and long presses you make.

    For watches with 1 button, only two actions can be programmed:​
    - long press
    - long press (2 times)
    For watches with at least 2 buttons, up to eight actions are allowed to be programmed:​
    - Top button long press: You could replace the default (Google Assistant).​
    - Top button long press (2 times).​
    - Top button long press + Bottom button short press.​
    - Top button long press + Bottom button long press
    - Bottom button short press
    - Bottom button short press (2 times)
    - Bottom button short press + top button long press
    - Bottom button short press + Bottom button long press
    Note: In order for you to configure combinations starting with the bottom button, you must select "Button Launcher" under Setting > Customization > Customize Hardware Buttons.​


    divider-2461548-960-720.png



    Measures to extend the battery life of watch


    If you don't need...

    • Adaptive brightness (auto brightness), you can turn it off in Settings > Display > adjust brightness, and adjust the brightness to an intermediate level. Remember, the brighter the screen, the more battery is used.

    • "Tilt-to-Wake", you can disable it in Settings > Gestures, also from the Wear OS app of the phone. With this feature enabled when a notification arrives the screen lights up when you lift your wrist, if you disable this feature the notification will still arrive but will not be displayed on the screen until you turn it on with the button.

    • "always-on Screen", you can disable it in Settings > Display, also from the app Wear OS of the phone. By disabling this option the screen turns off when not in use, also in Ticwatch this feature is less necessary than in any other watch as it replaces the screen is completely off by a screen in essential mode so it would always show the time.

    • "OK Google Detection", you can disable the option in Settings > Personalization. The Google Assistant can also be activated by pressing and holding the top button, or by sliding the watch face to the left.

    • Wi-Fi connection, you can disable it in Settings > Connectivity > Wi-Fi. In this way you avoid that it is constantly looking for connection when you are not at home, or away from any Wi-Fi network you use, however Wear OS automates this issue, and disables it automatically if it is not necessary, for example, when it is connected by bluetooth to the phone disables the Wi-Fi connection.

    • Notifications (or certain notifications) that appear on the watch, you can configure the notifications you do not need in the phone app "Wear OS by Google", in the option notifications. By default the watch constantly synchronizes all emails, messages and reminders, you can thus disable the notifications that you do not need to be notified by your watch.

    • Background heart rate monitor (from Google Fit), you can disable it in the settings of Google Fit. If you do not have any cardiac pathology there is no reason to be measuring your pulse all day if you are not doing some kind of sport.

    • Watch face with bright colors, animations or with various interactive capabilities, try another watch face. I recommend for low resource consumption Pixel Watch face.

    battery5.png


    In Mobvoi apps if you don't need to have activated...
    • 24 hour Tracking (heart rate monitor): Same opinion as the Google Fit monitor. You can disable it in the settings of TicPulse.

    • 24 hour automatic background monitoring (blood oxygen monitor): It makes oxygen saturation measurements every hour, in normal health conditions continuous monitoring is not necessary. There are leaks that in upcoming updates of Google Fit will implement a SpO2 monitor, for now there is no alternative. You can disable it in the settings of TicOxygen.

    • 24 hour stress monitoring: Check stress level every half hour. You can deactivate it in the settings of TicZen.

    • Automatic sport detection (TicMotion): Detects the activity you do according to the type of continuous movement you do for a few minutes. If you don't see it useful or you prefer to manually select the sport you are going to practice it can be disabled in the settings of TicExercise.

    mobvoi-en5.png


    Other meassures:
    • TicSleep: The application requires to have the heart rate monitor and the blood oxygen monitor activated to monitor while you sleep. From the app, in the settings you can customize the non-monitoring times for heart rate and blood oxygen, for example so that it only monitors at your usual sleep time.

    • Do track in the "Wear OS by Google" phone app which apps are consuming the most battery. You see it in Advanced Settings > Watch Battery. It also gives you information on the estimated battery life remaining and a graph showing how it has been draining.

    • Disabling Mobvoi's preinstalled apps, personally I don't use any of their health and fitness apps, I find more reliable for now, Google Fit (even though I have to do without SpO2 measurement). Disabling the apps I make sure they are not running in the background, another time I will expand information about this.

    These are several measures that can help, however, there are no miracles, and if now it lasts 1 or 2 days at most and applying all the measures you will gain maybe 1 day more, it is not a super improvement if in return you have limited many of the functions that the watch can offer you. My advice would be a middle ground and that you will disable what you need the least, or that will interfere the least in your daily use of the watch.

    Also you have to take into account the use that you give to the watch, if you daily monitor your workouts that you do, like running, walking, elliptical, etc, 1 hour for example, the battery will last much less than if you only use it to receive notifications. The old Nokia phone battery lasted several weeks, with the advent of smartphones you were forced to recharge the phone almost every day, hopefully every 2 or 3 days, because with the smartwatch is happening the same thing, we must be aware that the smartwatch consumes a lot of battery, and are not old casio that lasted you the watch battery years.


    divider-2461548-960-720.png



    How to disable the Watch's Bloatware. Mobvoi applications.


    The Ticwatch watches, and specifically the Ticwatch Pro 3 has preinstalled several health & fitness apps with which you can monitor your sports workouts and sleep cycles, as well as other apps to measure your stress level and ambient noise level. Also preinstalled on the watch are several watchfaces created by Mobvoi and other applications such as calculator, voice notes and an alternative to the Wear OS launcher. All of these apps are from Mobvoi.

    To put this post in context, I give my opinion about Mobvoi apps:
    • TicExercise in each update is improving but today I personally miscounts the distances in the workouts I do. In this case I use Google Fit and Runtastic although they are not perfect either, they lack for example to monitor blood oxygen (it seems that in future updates of Wear OS they will implement it in Google Fit) and of course a much more complete statistics.

    • TicSleep, TicZen/TicBreathe and TicHearing, I do not use them either, in my case I do not need to monitor my sleep cycle, nor the level of stress I have, nor the level of ambient noise.

    • TicHealth, TicPulse, TicOxygen, for what has been said in the two previous points are not necessary for me.

    • The Mobvoi preinstalled watchfaces I don't like any of them.

    • Calculator, voice memo and launcher are perhaps the only things I use from Mobvoi.

    Those who regularly use apps to monitor their sports workouts with the phone already have a favorite (such as Strava, Runtastic, Google Fit and a few others). Many of us have used them with the phone and in the servers of these apps we have our history of records, so many of us want to use these apps on the watch, and here comes the question, why do you want all that "bloat" of Mobvoi if you do not use it, which in many cases is working in the background and consuming battery without giving any use.

    To remedy this you can disable Mobvoi apps that you don't need. In the Ticwatch Pro 3 are preinstalled all you see in the list below. There are 20 packages. They can be disabled in 2 ways, via ADB commands, or through the watch settings. In the table, the 1st column is how the application is identified when you use ADB commands, and the 2nd column is how it is identified from the watch settings.

    table.png


    Disable from watch Settings (note the considerations below).

    Go to settings > Apps & Notifications > App Info > System Apps. From there you can disable (and enable again) all the mobvoi apps I show in the box (second column), except com.mobvoi.wear.mcuservice.aw and TicSystem. These if you want to disable them will have to be through ADB commands.



    Disable through ADB commands (note the considerations below)

    1. If you have not already done so, follow the steps in the "Prepare watch for advanced functions" section of the first post.

    2. On the computer, open a command window, for this in Windows type "cmd" in the start bar.

    3. Then enter the following command to connect to watch. It then accepts a message on watch that allows the computer to connect.
      Code:
      adb connect IP_of_watch:5555
      .
    4. Now, it is the step to check which Mobvoi applications are installed. The -e parameter (will filter enabled applications) can be replaced by the -d parameter (disabled applications):
      Code:
      adb shell pm list packages -e mobvoi | sort

    5. To disable Mobvoi applications one by one (it does not uninstall), you can use the following command:
      Code:
      adb shell pm disable-user --user 0 <package_name>
      
      Example:
      
      adb shell pm disable-user --user 0 com.mobvoi.wear.fitness.aw

    6. If you would like to re-enable movboi apps, use the following commands:
      Code:
      adb shell pm list packages -d mobvoi | sort
      
      adb shell pm enable <package_name>


    Considerations:
    • Disabling these apps will not damage the watch in any way. You will simply lose access to the services they provide, which, if you don't need or use them you won't care. You also prevent any personal data or metrics from being collected by Mobvoi.

    • I recommend NOT disabling com.mobvoi.wear.mcuservice.aw. If you disable it it will not go into essential mode when restarting the watch. Doing tests I check when I disable this package it enters in essential mode but when I reboot it doesn't, the package was kept in RAM memory.

    • If you want to keep the secondary button menu (when you long press), do not disable com.mobvoi.wear.system.aw and com.mobvoi.wear.mcuservice.aw.

    • If you also want to keep the water draining function from the right-click menu of the previous item, do not disable com.mobvoi.wear.fitness.aw.

    • If you want to keep the animation shown on watch when you charge watch, do not disable com.mobvoi.wear.system.aw. If you disable it, it will charge anyway, it is only aesthetic, you can install as an alternative Wear Charging Widget, it applies a nice animation when you charge the watch.

    • If you want to keep TicMotion (Automatic sport detection), don't disable com.mobvoi.wear.health.aw and com.mobvoi.wear.fitness.aw.

    • If you disable TicSleep, and you are interested in monitoring your sleep cycles, there is an alternative app that is highly recommended, Sleep as Android.

    • If you disable LauncherTic, the default Wear OS launcher will run (you can test this by disabling "Enable other launcher" in Settings > Customization).

    • If you disable Watchface, you can install other watch faces from the play Store, I recommend some in the "Watch Faces from the Play Store that I like" section of the first post.

    • If you do a factory reset all mobvoi apps will be re-enabled, and I think when you update the firmware as well (I haven't checked yet). However, the disabling process is done in a few minutes.

    • On some watches the performance should be considerably improved. I must say that the Ticwatch Pro 3 is a performance monster, and not at all Mobvoi apps affect its performance, maybe other watch models with more limited performance.

    • More info on this at this XDA thread.


    divider-2461548-960-720.png



    How to use Google Pay with unsupported banks.

    As of today, Google Pay has spread in most of Europe, USA, Canada, Brazil, Chile, Australia, New Zealand and some countries in Asia such as India and Japan, and in each of these countries there are banks that are compatible with Google Pay contactless payment and others that are not (here complete list of banks by country), for example, in Spain which is the country where I live, there are many banks that have already joined Google Pay. If you are a customer of one of the supported banks you can easily add your credit and debit cards to Google Pay and pay from your phone or watch without problems but unfortunately, there are 2 major banks (and several more minority ones) that currently do not support Google Pay payments, these are CaixaBank and Banco Santander.

    What happens to cards issued by entities such as these that have not joined Google Pay? In principle, you might think that there is nothing to do but, fortunately, there is a solution.

    Basically it is to use a debit card that does support payments with Google Pay, and that you can associate with your usual debit card. In other words, it consists of having the card act as a "bridge" between your bank and Google Pay. It is an interesting option, since it does not imply having to become a customer of another bank or accept their conditions if you become a customer (in some cases, having a minimum amount of money in your current accounts or having your salary paid directly into your bank account). In European countries there is a solution, which is not associated with traditional banks, supports Google Pay and serves perfectly as a bridge, it is the Curve card. If you check the list of supported banks by country you will see that it is compatible in almost all European countries, in fact this card operates in 31 European countries. If Curve is not integrated in your country, either inside or outside Europe, investigate the compatible cards in your country from this list in case there is an alternative such as N26, Revolut, Monzo, etc.

    tarjeta-curve-min.jpg

    In the case of the Curve Mastercard, it is a physical card that is sent to your home free of charge and is not associated with any bank account, but with one or more credit/debit cards that you own. Therefore, once received at home, you must activate the card in the mobile app and then upload the cards you want to associate with Curve. When you pay with the Curve card, the charge is made to the card you have chosen at any given time. Now if you want to make payments through Google Pay you just have to add it as any other since as I said before the Curve card is supported by Google Pay. Every time you use Google Pay to pay with the Curve card, the charge is made to the card you have associated. Here more info about the Curve card and here with an explanatory video.

    Although I consider that the great advantage is that you can use the card with non-compatible banks, the Curve card also has other advantages:
    • You can choose which of your VISA or Mastercard you want to pay with, by using the Curve Mastercard, you no longer need to carry the other cards in your wallet.
    • You can withdraw money from any ATM without commission (up to 10 times a month).
    • If you are traveling, you can withdraw money from any international ATM without commission (up to £200 / 220€) and you can also pay in foreign currency without commission (up to £500 / 550€ per month).
    • If you lose it you can block the card instantly from the mobile app.
    • The card is free, you don't pay anything for registration or maintenance and they don't charge commissions for making payments with it.

    Steps to link your card to the Curve card, and then add it to Google Pay.
    1. Follow the steps to open a free account on curve here.
    2. Now to add it to Google Pay, open Google Pay on the watch.
    3. Tap "Add card" and the setup will continue on the phone.
    4. Tap on the card already set up on the phone, or "Add a new card" if it had not yet been set up on the phone.
    5. Click "Enter details manually" to enter your card number, CVC and validity date.
    6. Enter your billing address and phone number, then press "Save".
    7. Read and accept the "Issuer Terms and Conditions".
    8. Finally, you will have to choose a verification system for the bank to verify your identity. By default the SMS option is checked, so make sure your number is correct and continue. When you receive the message, enter the code and that's it, you will have the card configured in the watch.
    Note: When paying for a purchase, if Contactless payment asks you for a PIN, always enter the one you have with the bank card, not the unlock code of the watch.


    divider-2461548-960-720.png



    How to use Google Pay in unsupported countries such as Iceland, Slovenia, Mexico, Israel or Turkey.

    gpay.png

    There are several countries in the world that support Google Pay for contactless payments, Here the list of countries supported to use Google Pay on phones and here the countries supported to use Google Pay on smartwatch (much less). Users in many countries are unable to use Google Pay because they do not yet have official support for Google Pay. Although there is a workaround for this, basically it is to bypass Google's verification of the country you are in based on the IP address which causes Google Pay app to be hidden in seconds if used in an unsupported country. Therefore, to avoid this you need an IP address of a supported country, for this you use a proxy or a VPN, so you can pay in any country where the merchant has Contactless payment. For a much more extensive info and considerations about the trick enter here, basically the steps to follow are as follows:

    1. Download the app Permanent Proxy from this link and install it on the watch. The app is designed for Wear OS devices and allows anyone to use Google Pay in regions where it is normally blocked.
    2. Go to Settings > system > About and tap "Build number" multiple times until you see a message that says "you are now a developer". Next go to Settings > developer options and enable "ADB debugging" and "Debug over bluetooth".
    3. Run Permanent Proxy app, it will ask for permissions, accept "always allow".
    4. Now create a personal proxy service that is reliable and avoid changing the IP address frequently, for example in Google Cloud.
    5. Enter the IP address and port of the proxy you created, and enable it. Now download from the Play Store, Google Pay (if it doesn't do it automatically) and you're done.

    In addition to following the considerations outlined in the official thread, user @bobybc adds a few more considerations:

    • There's no relation between GPay for phones and those for Wear OS - if there is an official support for given country it is not ( and for many EU countries it is the case) always valid for watches.
    • GPay app is installed by default on the watch, but it is hidden for the countries without official support. If you disable Wi-Fi on the watch and start a VPN on your phone, the app should appear in a while.
    • Even if you are using Permanent proxy, sometimes GPay is disabled after update of some related Google apps - Services framework, Play services, Google main app. In this case manual install of this Google Pay Wear app version and after watch restart it appeared again.


    Proxy.png



    divider-2461548-960-720.png



    How to take long screenshots with the Wear Stitch tool.


    If you want to take an long screenshot, showing an entire conversation or menu, you can do it with the help of adb and a Python script called Wear Stitch. This tool takes a screenshot, scrolls a bit, takes another screenshot and so on until it reaches the end of the screen. It then performs some image processing to combine the screenshots into one

    1366-2000.png

    Previous requirements:
    • Install Pyhon on the computer. Download it here.
    • Follow the steps in the "Prepare watch for advanced features" section of the first post.
    • Download the Wear Stitch tool here, and unzip the zip. It is an open source Python script that is available on GitHub.


    Steps:
    1. On the computer, open a command window and change to the directory where you saved the wear_screenshot_stitch script.

    2. If you haven't done it yet, install the Pillow library in Python with the following command
      Code:
      pip install pillow

    3. Then enter the following command to connect to the watch. It then accepts a message on the watch that allows the computer to connect.
      Code:
      adb connect IP_of_watch:5555

    4. Now to run the script and be able to make long snapshots, enter the following command:
      Code:
      python ./wear_screenshot_stitch.py --round

    Here you have more info to modify the command parameters. If everything went well, the script will start taking screenshots while scrolling the watch screen. When it has a few screenshots ready, it joins them all into a final image which is an long image. The process may take a few minutes.


    divider-2461548-960-720.png



    Conclusions on the current state of the Wear OS catalog.


    catalogo2.png

    For some time now, on the Reddit forum there has been uploaded a spreadsheet where all the models (I think) of watches with Wear Os that have been launched on the market since its inception are recorded (and have been recorded). Click here to see it. If it is true that some information is missing, but it gives you a clear picture of how Wear OS has been doing since it launched in 2014. Now that it looks like Wear OS is going to turn around in a few months thanks to its partnership with Samsung I've been taking a look at this log and have come to some quick conclusions. Does anyone draw any interesting conclusions from this database?.
    • Since June 2014 some 125 models of watches have been released.

    • There are 25 brands that are currently launching or have launched watches with Wear OS. These can be structured into 3 groups:
      - Technology companies such as Mobvoi, Huawei, OPPO and Xiaomi.
      - Watch manufacturers such as Fossil, Misfit, Skagen, Casio, Polar and Suunto.
      - Fashion brands such as Diesel and Emporio Armani​
      .
    • Fossil has released 17 models with Wear OS, the last one launched in January 2021, Fossil Gen 5. The watch brands Skagen and Misfit also belong to Fossil, and Fossil also manufactures under license for fashion brands such as Diesel, Emporio Armani, Puma, Michael Korps, Kate Spade NY and Tory Burch so the Fossil group would currently be the manufacturer of 40% of the models of watches with Wear OS that exist in the market.

    • The first watch with Wear OS (Android Wear at the time) was LG G Watch model launched in June 2014, and the first watch with Android Wear 2.0 was LG Watch Sport, launched in February 2017. I don't think this trend will continue, it looks like the first watch with Wear 3.0 will be a Samsung.

    • Interestingly, Samsung launched in June 2014 a watch with Wear OS, Samsung Gear Live, along with LG G Watch, as a presentation to the world of Android Wear at Google I/O 2014 and never again. It focused on its own operating system, Tizen.

    • The vast majority of Wear OS watches have been manufactured with round dial, only a few models such as the Xiaomi Mi Watch and OPPO Watch have been manufactured with a square dial, they are also among the few that carry a custom layer of Wear OS, MIUI and ColorOS respectively.

    • Only 12 watches allow to activate eSIM or NanoSIM and thus have autonomy with respect to the phone to receive internet signal. Some of them are Fossil Gen 5, OPPO Watch, Xiaomi Mi Watch and Mobvoi Ticwatch Pro 3.

    • If I had to choose 1 or 2 of the most representative watches (in my opinion) by each of the top brands it would be:
      - Mobvoi: Ticwatch Pro, Ticwatch Pro 3.
      - Fossil: Fossil Sport, Fossil Gen 5
      - Skagen: Skagen Falster 2, Skagen Falster 3
      - Misfit: Misfit Vapor 2
      - Suunto: Suunto 7
      - Polar: Polar M600
      - Casio: Casio Pro Trek
      - Xiaomi: Xiaomi Mi Watch
      - Oppo: Oppo Watch
      - Huawei: Huawei Watch 2​


    divider-2461548-960-720.png



    How to send files to watch without Wi-Fi network..

    Sending files to the watch from a smartphone can be done in 2 ways: Via USB cable and via Wi-Fi network, in the case of the Ticwatch Pro 3 you can only transmit files via Wi-Fi network (or make a homemade USB cable).

    It happens that there are times when you are not at home and want to send music to the watch or send an APK file to install it. The solution to this is activating the shared Wi-Fi connection of the phone, and pretend it is your home network.

    1. On the phone, go to settings > Other wireless connections and turn on "Personal Hotspot" (or "Wi-Fi data sharing" or "Wi-Fi Tethering").

    2. Within the Wi-Fi data sharing settings, replace the Wi-Fi network name and password and enter the same name and password of your home Wi-Fi network, this way the watch will connect automatically and you won't need to enter the password on the watch.

    3. Now, on the watch and if you haven't already done so, go to Settings > System > Info and tap "Build number" several times until you see a message that says "you are now a developer". Next go to Settings > developer options and enable "ADB debugging" and "Debugging over Wi-Fi".

    4. Next make sure that both your watch and mobile are connected to the same wifi network, momentarily disable bluetooth on your watch if Wi-Fi is not enabled on the watch. Now go to Settings > Connectivity > Wifi, click on the network you are connected to and write down the IP you will see.

    5. On the phone, install Bugjaeger (if you haven't already) and run it, click on the plug icon, enter the IP of your network and click "Connect".

    6. When connected you will see a notification appear on your watch where you have to give permission to link the phone to the watch, so click on "Always allow from this computer". Now in the app you will see the notification "Connected" and from the app you will be able to send files (Files tab) or install APKs (Packages tab).

    hotspot.jpg
    Bugjaeger-EN2.jpg



    divider-2461548-960-720.png

    How to follow a hiking route from your watch with ViewRanger app


    ViewRanger is a GPS navigation app that allows you to plan, navigate and share hiking or cycling routes. The app is optimized for use from your phone, and from your watch, even standalone from your phone. The app allows you to find routes near your GPS location, or you can search for routes in specific locations (these routes are uploaded by other users who have previously designed them).

    This app is currently the best optimized for Wear OS watches as a hiking tool, another alternative to ViewRanger would be Oruxmaps, which is very complete in the Android Smartphone version but is not very "worked" in Wear OS.
    logo-viewranger.png
    I. Installation.

    1. On the phone, download, install ViewRanger, and log in (or create an account if you haven't already).

    2. Make sure the phone is paired to the watch via bluetooth.

    3. On the watch, download and install ViewRanger from the watch's Play Store, open the app, grant location permissions. The ViewRanger session on the phone will sync to the watch automatically, and you're done.


    II. Description of ViewRanger in the watch

    When you open the app on the watch you will see several screens by swiping left or right:​
    • Routes: In this screen you can find the routes you have recently opened, find a route close to where you are or access a collection of recommended routes. You can also find your downloaded routes and follow them or delete them from the watch.
    • Record route: In this screen you can start recording the track (route) on the phone. Recording from the watch is an exclusive feature only available on Casio Pro Treck watches.
    • Maps: In this screen you can view your location on a map, change the map type and download a map for offline use. Initially, the watch must be connected and online to view the maps, but they can be saved for offline use.
    • Coordinates: This screen shows your current GPS position and elevation.
    • Settings: Here you can delete the downloaded maps on the watch. Also on this screen, if the watch app is not connected to the phone app, you will see the option to "Logout" because if it is connected to a phone, the account is managed on the phone.

    viewranger-en.jpg

    III. Adding routes.

    Before following a route you have to get it and add it in the app, there are several ways:​
    a. Add routes from the phone..​
    1. Launch the ViewRanger application on the phone.
    2. Searches and downloads a route to the phone.
    3. Launch the ViewRanger application on the watch.
    4. On the phone, open the selected route and press the "Start Route" button and you can follow the route on the watch and on the phone simultaneously. If you want to follow the route only on the watch press "Add to watch". The route will be uploaded to the watch (together with the offline maps). All routes saved in the watch appear in the Routes screen in the "Downloaded" section. Now, you can explore without phone or data connection.
    b. Add GPX routes from your phone
    1. Get the track of the route to follow, for example from a Wikiloc route that you download. The track must be in GPX format (not KMZ).
    2. On the phone, start the ViewRanger app, click the three dots in the upper right corner and select the GPX file in "Import/Export" > "Import from external device"[/B]
    3. Click the big + button in the lower right corner. Select "Start route" and go to the "Routes" tab and select the route in question.
    4. Now to upload the route to the watch, click on "Create route from Track" and accept. Finally click on "Start route" and you will be able to follow the route in the watch and in the phone simultaneously. If you want to follow the route only on the watch press "Continue". The route will be uploaded to the watch (together with the offline maps). All routes saved on the watch appear on the Routes screen in the "Downloaded" section. Now, you can explore without phone or data connection.
    Note 1: To download Wikiloc routes from your phone in GPX format, log in Wikiloc from your browser and search for a wikiloc route, inside the web page press the green "Download" button, select the "file" tab and finally "download".​
    Note 2: What is a track? A track is a record of where you have ridden. Inside the track it contains statistics such as length, speed and elevation.​

    c. Adding routes from the watch.
    1. Launch the ViewRanger application on the watch.
    2. Go to the Routes screen and choose one of these options to search for and download a route:
      • "Recent" to view routes you have recently reviewed, downloaded or created.
      • "Nearby" to view routes within 1.5 kilometers of your current location.
    3. Once downloaded, the route is saved in the watch (and offline maps). All routes saved in the watch appear in the Routes screen, in the "Downloaded" section. Now, you can explore without phone or data connection.


    IV. Follow a route from the watch.

    If you have your phone and watch in close proximity to each other, as soon as you start following a route on your phone it will be activated on your watch. The map that is open on your phone will be visible on your watch. In addition, you will be able to see live trip statistics, including GPS position, altitude, distance traveled and trip duration. While following a route, 5 screens can be consulted:​
    • Track: Allows you to start, pause, stop navigation.
    • Route details: You can view a compass arrow that directs you to the start or the next waypoint, or view a list of waypoints with directions.
    • Map: You can see the location where you are on the map. View the route itinerary on the map, and zoom and pan the maps.
    • Track statistics: You can see Duration, Distance, total ascent and total descent.
    • Statistics: Allows you to see the GPS coordinates and elevation of your current location.
    When you finish following a route, go to the Tracks screen and select "Stop". You will then see a summary of your track. Scroll down and select "Done".​
    If you want to start the route without relying on your phone, on the watch go to the routes screen, select a route from the "Downloaded" option and press "Start."​
    .


    viewranger2.png

    Considerations when following a route.
    • To zoom and scroll the maps, press once on the screen. Scroll the map as needed. Tap again to return to your GPS position.
    • You can change the map type (satellite view, OpenStreetMap...), to do so select on the "maps" screen the "map layers" option. Select the type of map. You will see the types of maps that are available and compatible with the watch.
    • You can get maps without internet connection, tap the "Map layers" button on the "maps" screen and select the type of map you want to save. Touch "Map Layers" again, select Download and expand the area of the offline map you want to download, finally select Save.



    divider-2461548-960-720.png

    7

    📣
    【TicWatch Pro 3 GPS OTA Announcement】
    📣

    Dear #TicWatchPro3GPS users
    🥰
    , starting from today, you will receive an update shortly. Simply plug your watch on the charging dock, connect the watch to your cellphone via Bluetooth, or connect to the internet via wifi, the update should start in a bit automatically.
    🥳

    -
    Version: PMRB.210624.001
    -
    The roll-out steps:
    👉
    10%: 2021/07/12 08:00
    👉
    30%: 2021/07/13 08:00
    👉
    50%: 2021/07/14 08:00
    👉
    100%: 2021/07/15 08:00
    -
    Release note:
    🥳

    1. Added new exercise modes such as HIIT
    2. Fixed other known bugs
    6
    Interesting apps in the Play Store

    After having talked about apps that I use and that are outside the Google circuits, I will highlight other apps that I use regularly and that I find very interesting and which are within the Play Store, and like the previous ones I reviewed, are all free.



    Wear GPS Fix: (Download here).​

    There is a known bug from Google (not yet resolved) where when you start a training activity on the watch that requires GPS (e.g. running or walking) and at that time you are connected via bluetooth to the phone (you should note that the watch already had acquired GPS positioning from the phone at that time). If that happens the watch will not acquire the GPS position independently and the run will not be tracked. Normally to avoid this error what you do is to turn off the bluetooth of the phone every time you want to run a workout with the watch, but it is uncomfortable to do that. The app fixes this bug. What it does is that it gets a correction independent of the GPS positioning on the watch. While waiting for a GPS correction, the app shows you the satellite status in real time so you can see how many satellites have been found and how many are used in the correction. Once the correction is acquired, Wear GPS Fix immediately opens your preferred workout app (Google Fit, Runtastic, Strava...), transfers the GPS correction to the app and you are ready to start your workout and you can get accurate GPS tracking.​

    At the moment, Wear GPS Fix works with the following sports apps and map apps: Google Fit, Ghostracer, Google Maps, Myzone, Nike Run Club, Runtastic (Adidas Running), Sporty Go, Strava, TicExercise, Viewranger.​

    Wear-GPS-Fix.png


    Wear BT Monitor: (Download here).​

    App that alerts you if the Bluetooth connection is broken between your Android phone and WearOS device (e.g. your phone goes out of BT range of your watch). This replaces the stock option that alerts you when the phone and watch lose their BT connection as it is not working. The app is managed from the phone, from there you can customize the vibration pattern that will sound when the bluetooth connection is lost so you recognize it when you feel it. From the watch you can activate, or deactivate when you think it is necessary. To test it, simply turn on airplane mode on your phone; your watch should vibrate in the custom pattern you have chosen.​

    Wear-BT-Monitor1.png
    _
    Wear-BT-Monitor2.png

    Wear Voice Opener: (Download here).​
    This is an app to open other apps on your watch using your voice, it is a workaround until the Google Assistant gets back (hopefully) the ability to launch apps that Google removed a few months ago without any explanation. This feature is very useful when driving or any other time when it's awkward to interact with the watch screen.​
    The idea is that you can assign the app to a physical button (I recommend the Button Launcher app for the possibilities it offers you) and then open other apps just by saying their name.​
    Installation and use:
    1. Install on the phone the app Wear Voice Opener (Play Store). Wait a few seconds, and install the app on the watch from "phone apps" in the Play Store. Once installed on the watch, you can uninstall the app on the phone.
    2. On the watch, open the app (I recommend customizing a physical button to open it). You will see a sentence "Say app name to open...", say the name of an app you have installed on the watch, for example "calculator" and it will run next.
    Usage considerations:
    • Wear Voice Opener opens apps based on partial matches, i.e. to open Google Fit just say "Fit".
    • The app works correctly with UK English and may not work as well with other languages.
    • You cannot open an app whose name is not recognized by voice command (e.g. 'AIDA64').

    wear-voice-opener.png

    Informer: (Download here).​

    This is an app that improves the way you receive notifications and their management on your watch. The free version allows:​
    • Present instant cards (better than Wear OS notifications) and allow you to reply to messages with a single tap.
    • Give instant replies with predefined messages or by "voice to text".
    • View images received via WhatsApp, Facebook Messenger and Telegram directly on the watch.
    • Receive WhatsApp call notifications.
    • Set notification vibration patterns according to contact.
    • Display notification history and missed calls.
    • You can set the do not disturb time (phone and watch will be in silent mode).
    The Premium version (0,99 €/month) also allows you to listen to WhatsApp voice messages, accept WhatsApp voice and video calls (and answer them by voice), adjust the notification font size, among other things. For much more extensive info and tricks enter here.​

    Considerations:
    • To receive notifications you must grant permissions to read notifications and storage permission, you must also install the app on the phone and watch.
    • To avoid duplicate notifications (stock and informer), disable stock notifications in the Wear OS app on the phone, go to notifications > Change notifications watch and disable duplicate apps.
    informer.jpg

    .​

    Feel The Wear - Notifications TTS (Download here)​
    The app creates custom vibration patterns for notifications that come to your watch (up to 5 different ones), you can assign them to the phone apps you prefer, this way, you can identify the notification without taking the phone out of your pocket. The app has in the Play Store the version for phone that is from where you configure the notifications you want to customize. You can also customize a vibration pattern that will sound when the bluetooth connection is lost, useful for when you are moving away from the phone, like the app "Wear BT Monitor" discussed in the section "Interesting apps outside Play Store".​
    feelthewear.jpg


    Wear Reminder 2: (Download here)

    Application that solves an old Wear OS bug that still remains and manages to replicate Google notifications (news, weather updates, sports...) and reminders that come to the phone also receiving them on the watch. The app must be installed on the watch and on the phone as a bridge. You can configure the importance of reminders and notifications (sound, vibration, text-to-speech...), also if you discard a notification on the watch, it is also discarded on the phone, and vice versa.

    Wear-Reminder.jpg

    Nav Explorer (Download here).​
    It is a very powerful file explorer for Wear OS, it also has root support to navigate through the system folders in case you have a rooted watch. It also allows you to easily transfer files to/from your computer, phone or tablet. The app creates an FTP server and communicates directly through your local WiFi connection, even also through Bluetooth to transfer files easily and quickly. In the section "Transfer files to/from internal storage" I explain in detail how to transfer files with Nav Explorer. The app has in the Play Store the version for phone/tablet that serves as a bridge to the watch either via Wi-Fi or via bluetooth.​
    Nav-Explorer1.png

    Button Launcher (Download here)​
    Allows you to customize the use of the watch's physical buttons to choose which apps or functions to launch quickly based on the combination of button presses. The application uses a combination of short presses and long presses to launch applications. A watch with a single button is limited to four different shortcuts, but if the watch has two buttons, you can use up to eight shortcuts.​
    button-launcher.jpg

    Wear Favorite Apps Launcher (Download here).​
    Generate a window with shortcuts to your favorite apps for quick access, you can access from physical buttons, from a dial complication, from cards or in combination with Button Launcher.​
    Wear-Favorite.png

    Toggler (Download here).​
    It is an application that generates shortcuts to enter Tilt-to-wake mode, Always-on display mode or a shortcut to quickly turn off the clock. The shortcuts are accessible just like any other app in the app drawer, so you can assign it to the physical buttons with the help of apps like Button Launcher or put it on the watch face as a complication. In my case I use it as a shortcut to have the screen always on when I go running and see the metrics in Google Fit without the screen turning off during the session.​
    Toggler-EN.png

    MultiTap Wear Keyboard (Download here)​
    Alternative keyboard to the traditional QWERTY, it is the multi-touch keyboard style of the old Nokia. In watches with screens smaller than 2 inches it could be a solution for many if they find the keyboard integrated with the watch uncomfortable.​
    multitap.jpg

    MGRS Wear (Download here)​
    Displays your current GPS location. A button at the bottom toggles the displayed location between MGRS, UTM and geographic coordinate systems. Very useful when you are oriented on a map and you need to know your position on the map and you don't have a reference point where you are.​
    MGRS-Wear.png

    Fit Companion (Download here).​
    It is a vitaminized Google Fit. Google Fit shows statistics of the activities you do throughout the day but these statistics may not be enough for some users, as they need to get much more comprehensive statistics on their physical activities. The app acts by analyzing the data collected by Google Fit and displays it in a comprehensive way. Some things it can do:​
    • You can create custom fitness goals, these goals can be by activity time, distance or by metrics (steps, active calories, Google Fit heart points and more).
    • You receive alerts in case of sedentary for prolonged periods.
    • It has a phone version where you can see all the statistics.
    • Data is displayed in the form of intervals ranging from one minute to one month.
    • You can combine data from two sources to compare and correlate the impact caused by both.
    • Breaks down heart rate into different heart activity zones.
    • Allows you to view data for up to a year at a time, while allowing you to change the date so you can view activity from any time in the past.
    The app is free, and is fully functional, however there is a paid pro version that extends features such as adding more than 2 custom fitness goals and exporting data to an excel file and being able to analyze it in depth. More info here.​
    fit-companion1.png
    -
    fit-companion2.png

    WearMedia (Download here).​
    It is a music player. It is one of the few music players for Wear OS that allows you to play music when you go for a run/walk without the need to also carry your phone as it can Play music contained in the watch's internal storage. The music player also includes an equalizer and supports many formats such as MP3, WAV, FLAC, AAC, etc. Wearmedia also has in Play Store the version for phone/tablet that serves as a bridge to transfer music to the watch, however for transferring music (or any file) I find it more practical Nav Explorer.​
    wearmedia.jpg

    Wear Casts (Download here).​
    It is a podcast player that allows you to download, manage and listen to your favorite podcasts directly from your watch without the need for your phone. You can sync podcasts and receive notifications of new podcasts you follow. Wear Casts also has a phone version, but it is only useful for adding podcasts to the watch, however you can add them from the watch itself. Other things you can do:​
    • Automatically downloads new episodes and automatically deletes played episodes.
    • Remembers the last played position for each podcast.
    wearcasts-JPG.jpg

    Yr (Download here).​

    A very cool weather forecast app, the weather service is provided jointly by NRK and the Norwegian Meteorological Institute. It is one of the most popular weather services in the world. At a glance you see day-by-day and hour-by-hour details in the forecast, alternative to the stock weather app.​

    yr.jpg

    Bugjaeger Mobile ADB: (Download here)

    The app is an adb command emulator that can be run from an android phone. Personally the app has become my preferred tool to send and install apps on my watch via apk. You won't need to install any app on the watch to make it bridge like Wear Installer, you just need to connect it via Wi-Fi and that's it, no computer. Also with the app you can do many more things, it is very powerful, I list the most useful to control the watch:​
    • Commands tab: Execute ADB commands or custom shell scripts to control the watch.
    • Log tab: read and export clock message log (logcat).
    • Packages tab: Install/Uninstall Apps, list and filter installed apps, open apps remotely, extract apk files from installed apps and send them to the phone.
    • Screencap tab: Take screenshots and send them to the phone.
    • Device tab: Information and specifications of O.S., CPU, memory, battery and screen.
    • Files tab: Send files from phone to watch (and vice versa), delete files from watch, modify watch file permissions.
    • Backup tab: Backup the watch (and restore it).
    To connect and to be able to execute the functions, you only have to do the following:​
    1. On the watch, go to Settings > System > About and tap "Build number" several times until you see a message that says "you are now a developer". Next go to Settings > developer options and enable "ADB debugging" and "Debugging over Wi-Fi".
    2. Make sure both your watch and mobile are connected to the same wifi network, momentarily disable bluetooth on your watch if Wi-Fi is not enabled on the watch. Now go to Settings > Connectivity > Wifi, click on the network you are connected to and write down the IP of your network.
    3. In the Bugjaeger app of the phone click on the plug icon, enter the IP of your network and press "Connect".
    4. When connecting you will see a notification appear on your watch where you have to give permission to link the phone to the watch, so click on "Always allow from this computer". Now in the app you will see the notification "Connected" and you will see the list of apps that are on the watch.
    bugjaeguer.jpg

    .​

    Other well-known apps:

    Apps that need no introduction, and also very useful on Wear OS....

    - Spotify - Streaming music player.​
    - Adidas Running by Runtastic - sports tracking app.​
    - Strava - Other sports tracking app.​
    - Google Keep - Notes and reminders.​
    - Duolingo - Language learning​


    divider-2461548-960-720.png



    How to change the watch resolution

    The TicWatch screen is 1.4 inches, there are applications especially those that you install outside the Play Store that are not optimized for Wear OS although they are functional. This implies that elements of the application interface are hidden because the screen is so small. For this there are some adb commands to temporarily modify the screen resolution (DPI) by following the following steps:

    1. If you have not done it yet, follow the steps in the section 'Prepare watch for advanced functions '

    2. On your computer, open a command window, for this in Windows type 'cmd' in the toolbar.

    3. Then enter the following command to connect to the watch. It then accepts a message on the watch that allows the computer to connect.
    Code:
    adb connect watch_ip:5555


    4. Now, is the step to change the density of pixels on the screen (DPI), type one of these commands:
    Code:
    adb shell wm density        ---> To display the current screen density
    
    adb shell wm density 180    ---> To apply a custom density, for example 180
    
    adb shell wm density reset  ---> To restore the default density of the watch


    Please note that altering its DPI can cause the Google Play Store to incorrectly label the watch as incompatible when downloading apps. This is because developers limit the compatibility of their application based on the DPI value of a device. So if for any reason you get an error, all you have to do is go back to your original DPI and download the app again. Once you have installed the application, you can go back to its custom DPI.


    divider-2461548-960-720.png



    Useful adb commands

    ADB is a tool that allows us to interact with our watch in a more advanced way. It should be clarified that this interaction is done via command line. Usually, these commands are executed from a computer with Windows or Linux; or a Mac with MacOS. ADB commands can be used for many tasks. These include reset watch, manually installing applications, extracting files, etc. In order to execute ADB commands and if you have not already done so, follow the steps in the section "Prepare watch for advanced functions". Here are some examples:

    Code:
    adb reboot
    
    adb disconnect
    
    adb shell screencap /sdcard/capture.png  --> Take screenshot
    
    adb shell pm list packages   --> List installed packages


    divider-2461548-960-720.png



    Speaker drain (Only Ticwatch Pro 3)

    After swimming or showering, water can get into the speaker (this is the hole on the right side of the watch), and the sound quality may change. Holding down the lower button, a menu is displayed, choose 'speaker draining' and it will play a kind of audio trill that will expel any water that has accumulated in the Speaker.

    draining.png


    divider-2461548-960-720.png



    How Wear OS watches are updated.

    There is quite a bit of confusion with this as to what the latest update is and where to look (system version, Wear OS version or firmware version?), plus it is also confusing how Wear OS watches are updated as it is somewhat different than Android phones.

    update1.png
    -
    update2.png
    -
    update3.png


    In order to clarify concepts for the future update of the watch, I briefly explain how it is about updates in Wear OS.

    Wear OS watches receive improvements through updates that arrive through 2 ways.


    Through Play Store, updating "Wear OS by Google" app.

    This is the most frequent type of update you will receive on the watch (every few days). These updates usually provide bug fixes, design updates and new features. They are completely controlled by Google, usually done "silently" with no user intervention required for the update to be applied and no reboot required afterwards.
    • What version do you have on your watch? It is checked in Settings > System > About > Versions > Wear OS by Google

    • How to update if available? From Play Store and also by tapping on Home App in Settings > System > About > Versions.


    Through system updates.

    On the other hand, the watch manufacturer applies specific improvements for the device via OTA through full firmwares, in these updates are also implemented large updates from Google (H Wear OS updates) where improvements are applied that from Play Store can not reach, for example security patches. These updates do require a reboot afterwards. Each manufacturer sets the pace of updates, for example, Mobvoi or Fossil update the system more frequently than Asus. Usually with these updates the watch receives important improvements such as in battery life, new functions that require special hardware features and/or security patches.
    • What System version do you have on the watch? It is checked in Settings > System > Info > Versions > System Version

    • What about the firmware version? It is checked in Settings > System > About > Build number

    • How to update if available? It is updated from Settings > System > About > System Updates

    • How to force update if available? Go to the "Force firmware update" section of the first post.


    As an example, these are the latest versions as of today for the Ticwatch Pro 3 GPS:
    • Wear OS version: 2.26
    • System Version: H-MR2
    • Firmware Version: PMRB.210407.001

    To put in context the pace of updates you can see Version history section of this link, the rate of updates that Wear OS receives, that does not mean that the partners (Mobvoi, Fossil...) apply updates to their watches on the release dates of each Wear OS update, as I said above the partners set their own pace. In the same way, you can see in the link the improvements planned with H-MR2 and others more distant based on Android 11.


    divider-2461548-960-720.png



    How to force firmware update (Only Ticwatch Pro 3)

    To make sure you have the latest firmware update for your watch, follow these steps:

    1. Plug the watch into the charger, and make sure it has at least 60% battery power and is connected to a Wi-Fi network. If there is, the update should start automatically.

    2. If it doesn't update, go to settings > System > About > System Updates. When it reports that it is updated, press in the center of the screen for about 5 seconds and after a few seconds it will start updating.
    update.png

    Latest Firmware version:

    For TicWatch Pro 3 GPS: PMRB.210407.001 (dated April 24, 2021).
    For TicWatch Pro 3 LTE: PMRL.210414.002 (dated May 01, 2021)


    Update History:

    Ticwatch Pro 3 GPS
    PYDA.200427.061.MRB.200911.001 - September 2020 (Initial version).​
    PYDA.200427.064.MRB.201023.001 - 10 November 2020​
    PYDA.200427.080.MRB.210114.001 - 01 February 2021​
    PMRB.210407.001 - 24 April 2021​



    Ticwatch Pro 3 LTE
    PYDA.200427.075.MRL201116.001 - December 2020 (Initial version).​
    PMRL.210414.002 - 01 May 2021​
    .


    divider-2461548-960-720.png



    Most common Wear OS issues and how to fix them.


    'OK Google' does not activate Google Assistant

    Numerous Wear OS users have noticed that their watch does not activate the Google Assistant when saying the voice command "OK Google". Although Google months ago acknowledged the problem and fixed it in a March update to the Google app many users were still reporting that it was not working.​

    okgoogle-en.png

    Google Issue Tracker: https://issuetracker.google.com/issues/172776291


    Who is affected?: All Wear OS watches of any model.


    Solution:
    1. Make sure that "OK Google detection" is enabled in the Google Assistant settings.
    2. Now it's about removing the Google app updates, so go to Play Store and click on My Apps > Google > Uninstall. You can also do it from Watch settings > Apps & Notifications > App Info > System Apps > Google > Remove Updates.
    3. Say "OK Google" and check that it works correctly, restart if necessary.
    4. Go back to Play Store, and update the Google app, also reboot if necessary.

    Note: From essential mode it will not detect "OK Google", only from watchface.​


    Loses GPS signal, when you get separated from the phone

    There is a known bug from Google (not yet resolved) where when you start a training activity on the watch that requires GPS (e.g. running or walking) and at that moment you are connected via bluetooth to the phone (you should keep in mind that the watch already had acquired GPS positioning from the phone at that moment). If that happens the watch will not acquire GPS positioning independently and the run will not be tracked when you move away from your phone.​

    The ideal is to use the GPS of the watch itself (actually it should say GNSS), as it will normally be more accurate than positioning with the phone, remember that the watch can simultaneously make use of several navigation systems, in addition to GPS these are, GLONASS, BEIDOU, GALILEO and QZSS. Normally the phones do not receive the signal of all these systems, although there are more and more phones that do, but in general terms, it is normal that the watch is better positioned. In addition to this, it would also be to avoid dependence on the phone when you go for a run. What happens? That after you have done the training session you check that the GPS was not detected and therefore nothing was recorded.​


    Google Issue Tracker: https://issuetracker.google.com/issues/183515540 and https://issuetracker.google.com/issues/176625267


    Who is affected? All Wear OS watches of any model.


    Solution 1:

    When you go out for a run/walk disconnect the bluetooth from the phone to lose the phone-watch link, and wait for the watch to position itself. The downside is that it usually takes quite a while for the watch's GPS to become active.​


    Solution 2:

    Another more recommended solution is through the app Wear GPS Fix, what it does is that it gets the GPS location on the watch. While you wait for the GPS location, the app shows you the real-time satellite status so you can see how many satellites have been found and how many are used in location detection. Once purchased, Wear GPS Fix immediately opens your favorite workout app (Google Fit, Runtastic, Strava...), transfers the GPS location to the app and you are ready to start your workout and you can get accurate GPS tracking. You can install the app from the Play Store on your watch.​

    Wear-GPS-Fix.png


    Google Assistant in certain (too many) situations does not work properly.

    assistant.png

    This bug has been known for at least 2 years (and unbelievably not fixed by Google). The fact of not having fixed this problem makes palpable the huge neglect in which Google has subjected Wear OS considering that the Google Assistant is one of the big claims (if not the biggest) when announcing the watches. One day you find yourself as a brand new owner of such a watch and you simply find that the Assistant does not work, it is very frustrating. Below I relate a few situations where the user experience is terrible when interacting with the Assistant:​

    - "Call xxxxx" (from your phonebook) and it will say "Sorry , I can't do that anymore". Interestingly if you call a spelled out number (even if it is in the phonebook) it works correctly.​

    - "Send text message to xxxxx Hi, how are you? " (from your phonebook or a spelled out number), it then asks for confirmation of what to send with the "cancel" or "send" buttons, I click "send" and screen is shown "Couldn't connect to your phone" .​

    - "Send whatshap/telegram to xxxxx", It asks "to whom?", but never recognizes the contact, it always asks "to whom?".​

    - "Play music", then says "here you go" (or something similar) and screen is displayed "Couldn't connect to your phone"

    - "Nearby restaurantss", and clicking on one of them displays the screen "Can't reach the phone at the moment" (can't reach the phone now). Any suggestions about places or businesses that you ask for and the assistant offers will do the same.​

    - "When you open McDonals", if there are more than one it shows a list of locations, and when you click on one of them, it says "Can't reach the phone at the moment".​

    - 'Browse to McDonals"​
    • If there is more than one destination, it shows you a list of locations, and when you click on one of them, it will return the error "Can't reach the phone at the moment"".
    • If there is only one location, it will say it understood but a black screen will be displayed and will not indicate anything.
    - "View appointments from my calendar" (calendar).​
    • If there is more than one entry, it will describe the first entry and announce that you will see the remaining ones, finally it does not show them, just a black screen.
    • If there is one entry, it will describe the entry but you will not be able to see more details, just a black screen.
    - "Search results for xxxxxxxx", it will say "this is the main result", but you will only see a black screen. This happens whenever the wizard needs to show you results from your request.​

    - "Show pictures of 'Cats'" and it will respond "Showing your photos of cats". However, it will not show any pictures, you will only see a black screen.​


    Google over the years has been tentatively fixing the interaction in some situations through Wear OS updates, for example, it has frequently been reported that reminders and notes could not be added through the assistant, currently those functions work correctly.​

    bug1.png
    bug3.png

    bug2.png
    bug4.png





    Who is affected? All Wear OS watches of any model.​


    Solution:

    There is currently no solution, however there are several indications that suggest that soon will be released an update to repair all these problems, these are:​
    1. In March this year they finally fixed the bug where the assistant did not recognize the voice command 'OK Google'.
    2. A few days ago they released the first app for Wear OS in years, the Gboard keyboard for WearOS.
    3. This week, many users are receiving a notification via phone to take a Wear OS satisfaction survey.
    4. And finally, at the annual Google I/O 2021 conference held in mid-May the partnership with Samsung was announced which could definitely boost the development of Wear OS, also rumored to launch before the end of the year Wear OS 3.0.
    Alternative Solution:​
    As I was saying there is no official solution to this by Google, but if an alternative solution for part of these problems, specifically when you want to:​
    "Call xxxxx" (from your address book).​
    "Send text message to xxxxx Hi, how are you?" (from your contact book).​
    "Send whatshapp message to xxxxx".​
    It is through Wear Text app (developer Malcolm Bryant). This app allows you to make phone calls or send a text message or WhatsApp using voice commands. This post explains about installation, configuration and use of Wear Text.​

    In the same way, we can all push the solution through the internal bug tracking system that Google uses, Google Issue Tracker for Wear OS developers to listen to our complaints and prioritize solutions to this major bug. Enter the tab of this bug in the tracker and give it a vote by clicking on the star in order to give it notoriety, you can also give your opinion in the issue tab if you think you can contribute something new. I recommend that you enter the tracker, right now is the most direct way for us to be heard by the developers.​


    Google notifications and reminders are notified on the phone, but NOT on the watch.

    This bug has been occurring for a long time in Wear OS watches, it consists in that all notifications that come from the Google app and that are notified on the phone are not notified also on the watch (Google notifications about news, weather, sports, etc.) nor the reminders that had been created with the Google Assistant (even if they had been created on the watch), it is always notified ONLY on the phone, but not on the watch. If the reminder is created from the calendar it notifies correctly on the watch and on the phone, therefore this error only happens with the Google app and Google assistant, the other third party apps work normally in terms of receiving notifications (WhatsApp, Telegram, etc.)​



    Who is affected? All Wear OS watches of any model.​


    Solution:

    There is currently no official solution from Google, we just have to wait. We can all push the solution through the internal bug tracking system that Google uses, Google Issue Tracker so that Wear OS developers hear our complaints and prioritize solutions to this major bug. Enter the tab of this bug in the tracker and give it a vote by clicking on the star in order to give it notoriety, you can also give your opinion in the issue tab if you think you can contribute something new. I recommend that you enter the tracker, it is currently the most direct way for us to be heard by the developers.​


    Workaround:.​

    There is a temporary workaround (until Google deigns to officially fix this problem). It is through the app Wear Reminder 2 by Malcolm Bryant (other apps of his among several others are Wear GPS Fix and Wear Installer). What Wear Reminder 2 does is that it replicates Google notifications (news, weather updates, sports...) and reminders that arrive on the phone by also receiving them on the watch. The app is installed on the watch and on the phone as a bridge. You can configure the importance of reminders and notifications (sound, vibration, text-to-speech...), also if you discard a notification on the watch, it is also discarded on the phone, and vice versa. Here a video of how Wear Reminder 2 works.​


    When you receive missed calls with the watch connected to the phone via bluetooth, the missed call notification is discarded from phone.

    Another bug that has been maintained for years, is that when you receive a call that you do not answer (missed call) and the watch is connected to the phone via bluetooth, the missed call notification disappears (is discarded) automatically from the phone and remains only on the watch, if the bluetooth is disconnected (i.e. the phone-watch link is lost) the missed call notification remains on the phone. This is a major bug because it is easy to not realize that someone has called when the notification disappears, being only present on the watch.​




    Who is affected All Wear OS watches of any model.​


    Solution:

    There is currently no official solution from Google, we just have to wait. We can all push the solution through the internal bug tracking system that Google uses, Google Issue Tracker so that Wear OS developers listen to our complaints and prioritize solutions to this major bug. Enter the tab of this bug in the tracker and give it a vote by clicking on the star in order to give it notoriety, you can also give your opinion in the issue tab if you think you can contribute something new. I recommend that you enter the tracker, it is currently the most direct way for us to be heard by the developers.​

    Workaround:

    While waiting for the official workaround, follow the steps below and you will be able to receive missed calls and it will show the notification on your phone and watch without being automatically dismissed.​
    1. On the watch, go to Settings > Apps & Notifications > App Notifications > Show All> System Apps > Call Manager and uncheck "Missed Calls".
    2. Then go to Settings > connectivity > bluetooth and make sure you have "Listen to phone voice call on watch" checked.
    6
    This is very boring, again I wonder if this thread really interests anyone, am I here alone?.

    I don't really need to write for myself. This thread is not a blog, you are expected to comment and react wether you like it or not.