Haipai Noble i9220 5.2 inch MTK6575 Android 4.0 Firmware, Custom ROMs!

[angelobiz]

hi to all...
i have a new release of firmware of haipai...
date of kernel is 26.11.2012 and android 4.0.6
it seems more fast... have a new panoramic mode for camera...
here the link

20121126_e1809c_v75_lx528_5640_5065.zip (246.2 MB)
https://mega.co.nz/#!ll0DiJ4A!Cy2pKwSAOfhwRJ852v1jsSzVN8UFm40AYj5gC-B8A8E

thanks to crysby88 for give me the update.

after you flash it,,, for flashing again you need plug the phone with the battery.
for have repartition fix you need flash old ebr1, ebr2 anf mbr of odl reparted firmware.

 

[quecui]

hi to all...
i have a new release of firmware of haipai...
date of kernel is 26.11.2012 and android 4.0.6
it seems more fast... have a new panoramic mode for camera...
here the link

20121126_e1809c_v75_lx528_5640_5065.zip (246.2 MB)
https://mega.co.nz/#!ll0DiJ4A!Cy2pKwSAOfhwRJ852v1jsSzVN8UFm40AYj5gC-B8A8E

thanks to crysby88 for give me the update.

after you flash it,,, for flashing again you need plug the phone with the battery.
for have repartition fix you need flash old ebr1, ebr2 anf mbr of odl reparted firmware.

Can u show more detail that step???
Thanks you

 

[sgdragon76]

haipai I9220 bad usb connector

i have same problem,
trying to find a spare part to replace the USB connector,

in the meantime im using this external universal battery charger


my haipai I9220 have same bad usb connector
sold out for and no more stocks for above mentioned external universal battery charger.
anyone has any recommended cheap universal battery charger suitable for haipai i9220 big battery.
thanks

 

[KapriQ]

I have broken usb charger connector in the mobile too. Its hard to find position in which is phone charging.
Can you show me some link, or photo and name of your external battery charger ?
Anybody knows, with which phone is compatible this battery from haipai ?? If we should know it, we can buy external charger without problem. Thank you for you answer

 

[frosti7]

I have broken usb charger connector in the mobile too. Its hard to find position in which is phone charging.
Can you show me some link, or photo and name of your external battery charger ?
Anybody knows, with which phone is compatible this battery from haipai ?? If we should know it, we can buy external charger without problem. Thank you for you answer

I've bought a generic universal charger from ebay, but i didnt use it much because i've repaird my handset at local shop,
when the usb broke the reception was really bad, but after the repair the recpetion is ok - i'm wondering if the usb hub is somehow used as the antenna?

 

[quecui]

i have same problem,
trying to find a spare part to replace the USB connector,

in the meantime im using this external universal battery charger


my haipai I9220 have same bad usb connector
sold out for and no more stocks for above mentioned external universal battery charger.
anyone has any recommended cheap universal battery charger suitable for haipai i9220 big battery.
thanks

I have broken usb charger connector in the mobile too. Its hard to find position in which is phone charging.
Can you show me some link, or photo and name of your external battery charger ?
Anybody knows, with which phone is compatible this battery from haipai ?? If we should know it, we can buy external charger without problem. Thank you for you answer

Here

 

[KapriQ]

Aha, i didnt know that is something like this ! Its very cheap to order, i will buy it ! But can you tell me : There are 2 pins from charger -> On witch pins on battery you put it on ? Can you give me a photo or can you paint it ? Thx very much, all of you have broken Micro USB connector in the phone ? And charging batteries with this ?!!! Thx !!! BB

 

[nohab013]

New kernel

Can u show more detail that step???
Thanks you

I'll try to be as exact as possible.

First you have to memorize where you can set back your phone's language to your one after flashing the ROM because it will start with Chinese, dunno how good you are at that but if as good as me, then it could be hard It's easy anyway, in the settings menu there is an "A" in a box in the front of the right row and if you hit it, you are saved.

Second, you have to back up your IMEI numbers with Mobileuncle Tools (or anything similar). There are other methods as well for restoring IMEI but this is by far the easiest.

Everything goes as described in "Update 2" in the opening comment.
You have to unzip all the data included in the zip posted by Angelo and replace the mentioned files (EBR1, EBR2, MBR _AND_ recovery.img) with the same files from the June 19 folder. After that you should flash the kernel exactly as described in "Update 2" chapter, but in my case the operation needed the battery, without it it couldn't have done. Just tick the "Auto detect" radio button.

After succesfully flashing the kernel, restart the system to check whether everything ran fine and then boot into CWM and flash the zip file found in MTK6575-2.5G-Root-ByPP.7z

After that, you'll probably have 2.5 GB internal memory and a fine system with some new features.

If you have some triangles in the left top corner saying that you don't have any SIM cards, altough you see them, restore the IMEI numbers _after removing the SIM cards_ with the tool mentioned earlier (or with any other mehod). After reboot with the SIMs inserted again it should work flawless

Of course, it's your own responsibility, i had some hairy moments until i came to the solution, and that the above mentioned steps worked in my case cannot guarantee that they'll in yours, so under every circumstances you _have_ to make a nandroid backup for all the cases you don't expect but can unfortunately happen.

 

[nohab013]

sdcard/sdcard2 issue

I'll try to be as exact as possible.

First you have to memorize where you can set back your phone's language to your one after flashing the ROM because it will start with Chinese, dunno how good you are at that but if as good as me, then it could be hard It's easy anyway, in the settings menu there is an "A" in a box in the front of the right row and if you hit it, you are saved.

Everything goes as described in "Update 2" in the opening comment.
You have to unzip all the data included in the zip posted by Angelo and replace the mentioned files (EBR1, EBR2, MBR _AND_ recovery.img) with the same files from the June 19 folder. After that you should flash the kernel exactly as described in "Update 2" chapter, but in my case the operation needed the battery, without it it couldn't have done. Just tick the "Auto detect" radio button.

After succesfully flashing the kernel, restart the system to check whether everything ran fine and then boot into CWM and flash the zip file found in MTK6575-2.5G-Root-ByPP.7z

After that, you'll probably have 2.5 GB internal memory and a fine system with some new features.

Of course, it's your own responsibility, i had some hairy moments until i came to the solution, and that the above mentioned steps worked in my case cannot guarantee that they'll in yours, so under every circumstances you _have_ to make a nandroid backup for all the cases you deon't expect but can unfortunately happen.

One more thing which is very important.
After installing as described above, you'll have an SD card with a size of ~33 MB and an SD2, which is your hardware SD card. This isn't perfect because most of the apps want to use the sdcard directory, and you can change it in some of them but cannot change in the others (even if you can who wants to change it in almost every app?). This is bad as well in case you have your apps backed up with titanium, because the path probably leads to ...sdcard in every case.

The solution is fortunately simple (for you at least, i googled it for 3 hours): you have to change 2 rows in your /system/etc/vold.fstab file

You'll see two lines like these:

dev_mount sdcard /mnt/sdcard2 emmc@fat /devices/platform/goldfish_mmc.0 /devices/platform/mtk-sd.0/mmc_host/mmc0
dev_mount sdcard /mnt/sdcard auto /devices/platform/goldfish_mmc.1 /devices/platform/mtk-sd.1/mmc_host/mmc1

Change them to these:

dev_mount sdcard /mnt/sdcard emmc@fat /devices/platform/goldfish_mmc.0 /devices/platform/mtk-sd.0/mmc_host/mmc0
dev_mount sdcard2 /mnt/sdcard2 auto /devices/platform/goldfish_mmc.1 /devices/platform/mtk-sd.1/mmc_host/mmc1

Remember to give the new file the same permissions after overwriting the old one with it (-rw-r--r-).

If done, reboot and it should be okay.

 

[Lugsy41]

Alps I9220 firmeware update

Hi, I have an Alps I9220 with android version 4.1.9 athough the software looks like Gingerbread.
Is there a ICS or Jellybean firmware i could update to the phone?
Also would like a flashing guide as well. I have flashed other phones with CWN and Odin

 

[nohab013]

light sensor stopped working after the update

hi to all...
i have a new release of firmware of haipai...
date of kernel is 26.11.2012 and android 4.0.6
it seems more fast... have a new panoramic mode for camera...
here the link

20121126_e1809c_v75_lx528_5640_5065.zip (246.2 MB)

thanks to crysby88 for give me the update.

after you flash it,,, for flashing again you need plug the phone with the battery.
for have repartition fix you need flash old ebr1, ebr2 anf mbr of odl reparted firmware.

Hi Angelo,
thank you for the link again. Unfortunately the light sensor stopped working after the update. As the G-sensore hadn't been working properly from the very first moment (very rapidly changing values with high alternates), i would like to ask whether have you ever heard about a similar problem? Are there any patches which can solve it?
thanks
Akos

 

[aborakan]

hi
when i try to to enter ttha download mode it goes to fastboot and the system is erased even the system recovery

any idea how to enter download mode by fastboot ??

the buttons works

 

[nikhazimi]

hello, I got a problem on my mtk6575 after used SPMultiPortFlashDownloadProject. My phone cannot turn on / dead. When I press power button, it's only blue light on top right is blinking. Any solution to fix this? your help for this is highly appreciated
Thx.

 

[sas007]

hello, I got a problem on my mtk6575 after used SPMultiPortFlashDownloadProject. My phone cannot turn on / dead. When I press power button, it's only blue light on top right is blinking. Any solution to fix this? your help for this is highly appreciated
Thx.

re flash using correct drivers and firmware.it seems you may have flashed incompatible firmware or the right firmware with wrong driver settings.

 

[erga]

hello all

I want to ask, can I use this ROM in my Chinese Phone Galaxy Note 2 Clone MTK6575??

thx

 

[guardr0]

hi to all...
i have a new release of firmware of haipai...
date of kernel is 26.11.2012 and android 4.0.6
it seems more fast... have a new panoramic mode for camera...
here the link

20121126_e1809c_v75_lx528_5640_5065.zip (246.2 MB)
https://mega.co.nz/#!ll0DiJ4A!Cy2pKwSAOfhwRJ852v1jsSzVN8UFm40AYj5gC-B8A8E

thanks to crysby88 for give me the update.

after you flash it,,, for flashing again you need plug the phone with the battery.
for have repartition fix you need flash old ebr1, ebr2 anf mbr of odl reparted firmware.

hi...i flashed to this firmware, but when i try to apply update from sdcard for the MTK6575-2.5G-Root-ByPP.zip, i got error E:signature verification failed.
Installation aborted.

how to overcome this?

 

[guardr0]

IMEI null for sim 1 & 2

guys...after i flashed, my IMEI number both gone...can't make a call, can't send messages...i tried both way of changing imei number as in the 1st page, but with the IMEI changer, failed...and with ZOPO, i didn't find anything as stated there...
any help please?

 

[Ynott103]

hello guys after i flashed to this firmware and applying the 2.5gb,now the phone is stuck on the boot screen. i have try wiping cache partition and data but still stuck on the boot screen.

 

[sas007]

hello guys after i flashed to this firmware and applying the 2.5gb,now the phone is stuck on the boot screen. i have try wiping cache partition and data but still stuck on the boot screen.

They dont seem compatible together on your device.All you can do now is flash stock firmware making sure it is the firmware that is appropriate to your device,did you make a note of the firmware you were running?.if you know for sure re flash mate.

---------- Post added at 10:06 PM ---------- Previous post was at 10:02 PM ----------

guys...after i flashed, my IMEI number both gone...can't make a call, can't send messages...i tried both way of changing imei number as in the 1st page, but with the IMEI changer, failed...and with ZOPO, i didn't find anything as stated there...
any help please?

Is your device rooted?take out your battery write down imei numbers.
install this and write imei back to device but you must be rooted.
http://www.mediafire.com/?zztcmmm5fude5iz
http://www.mediafire.com/?2qyaau6v0yec2ad

---------- Post added at 10:08 PM ---------- Previous post was at 10:06 PM ----------

hello all

I want to ask, can I use this ROM in my Chinese Phone Galaxy Note 2 Clone MTK6575??

thx

only if you want to brick your device mate.so no i would,nt

 

[Ynott103]

Thanks,I did reflash it and everything working again now on the new firmware, but I lost root access which I use to have at first. I have try several times but I can't get the super user and the other files to show up.