Haipai Noble i9220 5.2 inch MTK6575 Android 4.0 Firmware, Custom ROMs!

Search This thread
By:
Advanced…
P

psantonis

New member
Feb 2, 2013
1
0
Rong flashing?

HI
Congratulations fo exellent work
My haipai i9220 no power on after flashing.
I try to flash my phone only the *UPDATE 2*
I do not anything else before just this instructions. When flash the phone full a red bar and after error 1036

Can somebody help me please?

-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
*UPDATE 2* Here is a custom firmware ( most of functions are working and rooted ) , all credits to yiminghung and angelobiz, as usual general instruction and faster links are brought to you by zBeYuz

0. How To Flash Haipai Noble I9220 Firmware On YouTube By Angelobiz

1. Before upgrade to this firmware, remember to backup all your apps using My Backup or Titanium Backup so that we can restore those apps later.
Download ADB driver if you have not installed it ( Tested on Windows 7 )
You must have debug usb active in your phone. this driver need for use adb command example for root script or use MTP function.

2. Download firmware + flashing tool + drivers from here: May 7 Firmware With New System.img
OR Only Driver For Haipai I9220: Drivers

3. Unrar the firmware, turn off your phone and take the out battery, then plug the phone into your PC.

4. Install the driver from the firmware folder that you unrar before, then plug out the phone.

5. a) Go to Flashtool folder and run SPMultiPortFlashDownloadProject.exe
b) Choose Factory Database --> Setup data source file: "MTK_DATABASE.mdb"
c) Choose File --> Open download agent file: "MTK_AllInOne_DA.bin"
d) Choose Scatter File: "MT6575_Android_scatter_emmc.txt" in Firmware folder.
e) Choose the figure same as the picture: SmartPhone MPD.jpg, which can be found in Firmware folder.

6. Make sure the phone turned off and the battery was taken out. Click Start All and plug your phone into the PC then wait about 5-10 minutes for the flashing process to finish ( Write OK ! ).

7. After it is done, we are good to change the IMEI. However, before that try to turn on the phone to see whether the phone is working or not.

8. If everything is ok, excepted IMEI was missing, download IMEI Changer Tool from here: IMEI Changer For Mtk6575

9. Unrar, install the program and run SN_STATION, which can be found on your desktop. Follow the instruction in the Chinese manual, but we only need to follow the picture in that manual.

The file "Modem Database" and "AP Database" is in firmware folder. You need to choose exactly the file that you see in the picture.

10. Write down two IMEIs on the back of your phone ( you need to take the battery out to see it ).

11. Again turn off your phone and take the battery out, then plug the phone into your PC, but this time we need to put the battery back in very quickly as soon as we see:
"COM port searching and preloader handshake ok" on SN Writer Log.

11. Wait until "Write Result Indicator" becomes green, then the IMEI has changed successfully.

OR you can try to change your IMEIs by using ZOPO IMEI ( Thanks to colouriste )

1. REMOVE SIM CARD(S) FIRST !
2. Check "Dual Imei"
3. Type in original IMEI #'s 1 & 2 and then
4. Click "Write"

Enjoy the new firmware with GPS working, wifi improved, front camera working, beautiful font and more...

2-1) Here a online translation of custom recovery in English: ( Thanks to angelobiz )


2-2) Haipai i9220 Data to 2.5gb ( UPDATED ! )
? What is it ? 2.5gb data means never again out of storage for apps. You lose "internal sdcard". Only useful if you have hardware sdcard

---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
 
V

vaiala69

New member
Aug 4, 2011
1
0
Does anybody know where I can find ROM for "Haipai Noble H868"

Does anybody know where I can find ROM for "Haipai Noble H868" please. This a chinese mobile running android but I have sorta semi bricked it so need the original(did not make a backup) or any other rom designed for this phone.
 
I

Izaqueu29

Member
Apr 25, 2014
13
0
Mobile will not turn over and is not recognized by the computer

Hello after attempting to update the firmware an error after filling the rod of pink and now the phone will not turn over and is not recognized by the computer, anyone know why? What should I do now? Completely lost my phone? Thanks in advance. :crying::(
 
M

Mahmoud Abdulrady

Member
May 24, 2014
13
1
zbeyuz said:
This thread is only for Haipai I9220

Star N8000 Official Thread: http://forum.xda-developers.com/showthread.php?t=1695210

Hapai X710D MTK6577 Official Thread: http://forum.xda-developers.com/showthread.php?t=1847136

WARNING: You do it with own risk ! I don't responsible for any damage to your phone.

Thread logs ( New ! ):
*** On 1 September 2012 *** Rearrange the thread to make it easier to read and follow :D


*UPDATE 1* Here is my 4Shared folder: Haipai I9220 MTK6575 which is including: vold.fstab, Mtk6575 USB Driver, latest flashing tool and the firmware as well as a root file FOR HAIPAI I9220 ONLY. Hope this help ;)

How to root: All credits to Bthoven and download links are brought to you by zBeYuz

1.Please download root file from the link above.
2.Go to settings-developer options-click USB debugging.
3.Connect the phone with computer,turn on usb device.
4.Click the file you download from the link TPSparkyRoot.bat
5.Your phone will restart first time,after the phone start finish(until you see the unlock),click enter in the window of TPSparkyRoot.bat.
6.The phone will restart second time,still the same as first time we did.Then start third time,same as we did in last two times.Click enter then phone was rooted.
7.You will see two more app was installed in your phone that means root phone successfully.

After successfully rooted, it will install root explorer.apk Chinese version which is rather useless for installing Market because it's all in Chinese. Thus, you need to download this "ES File Explorer" in order to put Google Play into the system folder. People who have a problem when installing Google Play by using apk, for example: Error processing purchase [DF-BPA-13]

Here is how to install a new and working Google Play Store:

1. Download "Vending.apk" from the same mediafire folder above.
2. Copy Vending.apk to \system\app\ folder in your phone by using ES File Explorer in root explorer mode with system file mounted.
3. Change permission of Vending.apk to Read/Write for Owner; Read for others (rw-r--r--)
4. Shutdown your phone.
5. Switch on your phone, you will see Google Play Store app, and Enjoy !


*UPDATE 2* Here is a custom firmware ( most of functions are working and rooted ) , all credits to yiminghung and angelobiz, as usual general instruction and faster links are brought to you by zBeYuz :D

0. How To Flash Haipai Noble I9220 Firmware On YouTube By Angelobiz

1. Before upgrade to this firmware, remember to backup all your apps using My Backup or Titanium Backup so that we can restore those apps later.
Download ADB driver if you have not installed it ( Tested on Windows 7 )
You must have debug usb active in your phone. this driver need for use adb command example for root script or use MTP function.

2. Download firmware + flashing tool + drivers from here: May 7 Firmware With New System.img
OR Only Driver For Haipai I9220: Drivers

3. Unrar the firmware, turn off your phone and take the out battery, then plug the phone into your PC.

4. Install the driver from the firmware folder that you unrar before, then plug out the phone.

5. a) Go to Flashtool folder and run SPMultiPortFlashDownloadProject.exe
b) Choose Factory Database --> Setup data source file: "MTK_DATABASE.mdb"
c) Choose File --> Open download agent file: "MTK_AllInOne_DA.bin"
d) Choose Scatter File: "MT6575_Android_scatter_emmc.txt" in Firmware folder.
e) Choose the figure same as the picture: SmartPhone MPD.jpg, which can be found in Firmware folder.

6. Make sure the phone turned off and the battery was taken out. Click Start All and plug your phone into the PC then wait about 5-10 minutes for the flashing process to finish ( Write OK ! ).

7. After it is done, we are good to change the IMEI. However, before that try to turn on the phone to see whether the phone is working or not.

8. If everything is ok, excepted IMEI was missing, download IMEI Changer Tool from here: IMEI Changer For Mtk6575

9. Unrar, install the program and run SN_STATION, which can be found on your desktop. Follow the instruction in the Chinese manual, but we only need to follow the picture in that manual.

The file "Modem Database" and "AP Database" is in firmware folder. You need to choose exactly the file that you see in the picture.

10. Write down two IMEIs on the back of your phone ( you need to take the battery out to see it ).

11. Again turn off your phone and take the battery out, then plug the phone into your PC, but this time we need to put the battery back in very quickly as soon as we see:
"COM port searching and preloader handshake ok" on SN Writer Log.

11. Wait until "Write Result Indicator" becomes green, then the IMEI has changed successfully.

OR you can try to change your IMEIs by using ZOPO IMEI ( Thanks to colouriste )

1. REMOVE SIM CARD(S) FIRST !
2. Check "Dual Imei"
3. Type in original IMEI #'s 1 & 2 and then
4. Click "Write"

Enjoy the new firmware with GPS working, wifi improved, front camera working, beautiful font and more...

2-1) Here a online translation of custom recovery in English: ( Thanks to angelobiz )
http://tabletrepublic.com/forum/cortex-a9-ti-omap-4/smartq-clockworkmod-recovery-menu-%5Btranslated%5D-2037.ht-l

2-2) Haipai i9220 Data to 2.5gb ( UPDATED ! )
? What is it ? 2.5gb data means never again out of storage for apps. You lose "internal sdcard". Only useful if you have hardware sdcard
http://www.mediafire.com/?8n1u8n72180iggd


*UPDATE 3* ( Quote from angelobiz. Thanks a lot for your hard work, Angelo. You are rock !!! :D)

"Now we have all we need for make a firmware without bug!!!

Thanks to Johnny Hung from Taiwan for fix network location and Google Apps
Thanks to Resquer from Russia for English Recovery
Thanks to Chinese man that make a script for root
Thanks to me from Italy for collect all this information
Thanks to all that i no remember from World ( by XDA and Iphone.ru)
a very example of International Cooperation...
If our governments do the same ... the world would be better !

Change log:

Google Apps
Network Location
GPS
2gb of ram for data
Custom Recovery CWM in English
Full Stock Firmw!re (boot, preloaded, modem etc etc...)
Change Imei
After i find a script for remove ads form app: It is working!!! youkneed replace with original file.
"Beats Audio" I have installed it with custom recovery... but no there is any apps to use it...only when you play music, you have difference... but i don't like play music so i don't know if make a difference.... you try it!!
Only 1 bug have our phone.. but i thinks that it is a hardware bug, so we cannot solve with upgrade a firmware:
"Wireless signal isn't very high"

Download:

Angelobiz's folder

Install:

Please refer to Update 2 - Step 1 to 6 on how to flash a new firmware


*UPDATE 4* ( Quote from angelobiz. Thanks a lot for your hard work :D)
"New ROM by AngeloBiz, based on kernel of 5 June.

If something doesn't work, you can restore your phone with stock firmware :)

Make a backup of your data or apps with Titanium Backup or same apps. The flash erase all your data, and the nandroid backup won't work if it is of previous kernel ( in my phone don't work anymore 3G, after restore of data nan-droid backup of 14 May kernel)

Change log:

Kernel 05 June
Root Enabled
Change logo battery, now with %
change host file, no ADS .-)
rename com.Google.android.features.vendor.xml
change logo.bin, boot logo and boot animation (no brands)
add some sounds
add some useful apps
no Chinese apps
Repartition Fix (you will have: Internal memory 2gb, SD1 external sd, SD2 512mb)
Backup and restore work only with this version of kernel

Download:

Stock Firmware of 5 June
http://www.mediafire.com/?e2f9h8bfb1f66
Angelobiz v.2.0 Update.zip
http://www.mediafire.com/?o9d7g9c9xurk3

Install:

Download stock firmware of 5 June:
You must flash all firmware !!!
Start your phone
Copy the update.zip in your sd card.
Go in the recovery mode:
With phone off, you hold volume + and power together.
Go to "install zip from sdcard"
Go to "choose zip from sdcard"
Choose right update.zip
Apply :)
Wait...... Wait....
Reboot your phone"

If you are stuck at Booting Screen, please try those tips below ( For UPDATE 4 Only ): by zBeYuz :laugh:

1. Did you forget to extract your system.zip in firmware stock 05 June folder ?
I just found out earlier that I totally forgot about it .
Just extract that file you will get system.bin then delete system.zip and start to flash the firmware normally. ( Booting up will take about 3-5 minutes after it is done ).
If the phone is still stuck please consider the next step...

2. One more thing to take note, I am using different flash tool from angelobiz:

You can refer how to flash with this flash tool here:

0. Driver must be installed: http://www.4shared.com/rar/9onOaDl5/Driver_New.html? ( Please refer to UPDATE 2 for more details )

1. Download Only Flash Tool: http://www.4shared.com/rar/v8txho3k/Flashing_Tool.html?

2. a) Go to Flash tool folder and run SPMultiPortFlashDownloadProject.exe
b) Choose Factory Database --> Setup data source file: "MTK_DATABASE.mdb"
c) Choose File --> Open download agent file: "MTK_AllInOne_DA.bin"
d) Choose Scatter File: "MT6575_Android_scatter_emmc.txt" in Firmware folder.
e) Choose the figure same as the picture (Setting f/r SmartPhone MPD.jpg), which can be found in Firmware folder.

3. Make sure the phone turned off and the battery was taken out. Plug the phone into the PC and wait about 5-10 minutes for the flashing process to finish ( When you see it becomes green and states that "Write OK" ).


*UPDATE 5* ( Quote from angelobiz :D)

Change log: Thanks to Johnny !!!

You can choose re-partition fix that you want ( Please download from folder 2 below either 2.5GB or 2GB Fix ).
Now data restore from nandroid backup work with new recovery.img !!!!
You can flash 2.5gb re-partition fix now !! It hasn't had bugs now !!!
New launcher and new icons
Root Inside
Host updated for no ads
Beats Audio inside for better sound
News useful apps
Minor bug fix
Change battery icon

Download:

1 - 19 June Firmware ( Download all the files in this folder and put all in one place - remember to extact system.rar )

Re-uploaded: preloader_e1809c_v75_lx528_sx
http://www.4shared.com/file/NsworLYX/preloader_e1809c_v75_lx528_sx.html

Re-uploaded: uboot_e1809c_v75_lx528_sx
http://www.4shared.com/file/1cAAxMvd/uboot_e1809c_v75_lx528_sx.html

2 - Angelobiz 3.2 Update ( 3 Files ) + New Recovery.img + Re-partition Fixes ( 2 Files ) ( For a new recovery.img, put it inside the 19 June Firmware and flash as normal )

Install:

- If you have old firmware before 19 June, you must flash all firmware of 19 June ( Please refer to Update 2 - Step 1 to 6 on how to flash a new firmware )
After you have 19 June firmware, then copy Angelobiz 3.2 update.zip on your SD , start in CWM recovery ( Hold Volume + and Power button together ) then launch Angelobiz 3.2 update.zip

- If you have 19 June Firmware with CWM:
copy update.zip on your SD , start in CWM recovery, and launch Angelobiz 3.2 update.zip

- If you have 4 or 5 June firmware with CWM
copy Angelobiz 3.2 update.zip on your SD , start in CWM recovery, and launch Angelobiz 3.2 update.zip


Tips + Tricks:

1. Thanks mikeysteele: "One thing I noticed after installing Set CPU is the kernel defaults to the Performance Governor. This means the CPU is always running at the maximum frequency so that might explain the poor battery life. I changed it to the On Demand governor and my battery life has improved."

2-a. Thanks angelobiz: For remove old, hidden driver you can see this: http://www.tech-recipes.com/rx/504/how-to-uninstall-hidden-devices-drivers-and-services/

2-b. Thanks caviar44: This is a tool to remove old drivers: USBDeview v2.11. Just right click on driver instance and then choose "uninstall selected devices".

3. Moborobo - The Android Smartphone PC Manager ( You can use it to install apps, make a backup, blah blah :D ) : Moborobo

4. For people who want to have better WiFi signal please refer to those picture as it show how to make some changes to the phone antenna. Antenna


Good Luck~

Thank me if you think you can :D

FIGHTING !!!
Click to expand...
Click to collapse








Can you please upload the. " systemui.apk " file for me? ??
Cuz. Its messed up in my i9220 and statusbar is gone ... background. Turned to black ... please I need help
 
J

JO_KeR

New member
Jun 6, 2014
1
0
I am new at this. When I flash the 19 june firmware, I get a black screen on my phone. When I try to flash the other firmware,the back button does not work and the camera give an "can't connect camera" error. I really appriciate if someone can help me.
 
R

Ranx91

Member
Apr 15, 2014
17
1
hi
Can someone made me a zip of 19 "June Firmware" because i cant download some file:
EBR1
EBR2
MBR
Thanks
 
Last edited:
A

ar_156

Senior Member
Mar 3, 2007
150
5
Ranx91 said:
hi
Can someone made me a zip of 19 "June Firmware" because i cant download some file:
EBR1
EBR2
MBR
Thanks
Click to expand...
Click to collapse

Full June 19th firmware: http://pan.baidu.com/wap/link?uk=3356131961&shareid=185447&third=0

---------- Post added at 12:03 PM ---------- Previous post was at 11:57 AM ----------

You can also flash into June 5th stock firmware , then SD flash into Angelobiz 3.2, it will auto-root, and auto-partition into 2.0GB.
I can confirm it works, the Google play is old so after you register DO NOT download any app or game, they will crash, just run Google Play then exit, it will auto-update in the background, after 10 minutes (depends on your Internet speed) run Google Play again, if you see the interface has changed you are updated, now you can download apps or games.
 
  • Like
Reactions: Ranx91
R

Ranx91

Member
Apr 15, 2014
17
1
Thank you very much!!!
So i flash this firmware with "SP Flash Tool" then i go into recovery mode and flash the Angelobiz firmware, righr?
 
Last edited:
A

Anonymous_Gamer

Member
Apr 14, 2015
39
1
I don't understand

This thread is very complicated, I have no idea which files to download.
I want to repartition the storage, I have a internal,usb storage and sd card which i put in a sd card.
How do I make it so apps can be installed to the sd card 2 not the usb storage(sd card 1)?
Which file should i download?
Also which custom rom/filmware should I download?
Thanks.
 
You must log in or register to reply here.

Similar threads

S
[GUIDE] [HOW-TO] Install Adobe Flash Player on Android 4.1 Jelly Bean/ Android 4.4
Replies
1K
Views
3M
S
sink1991
angelobiz
Star N8000, firmware and rom
Replies
2K
Views
597K
C
crisbernales
angelobiz
Star I9220 DPAD, firmware and rom
Replies
872
Views
349K
N
nessyb
sas007
STAR N9770 DUAL CORE MT6577/ulefone N9770.
Replies
2K
Views
517K
C
cuando15
ronbo76
  • Poll
Safe mode in Android - what to do if you see that label on your screen
Replies
14
Views
580K
E
eye.wander

Top Liked Posts

24 Hours All time
  • There are no posts matching your filters.
  • 29
    zbeyuz
    zbeyuz
    This thread is only for Haipai I9220

    Star N8000 Official Thread: http://forum.xda-developers.com/showthread.php?t=1695210

    Hapai X710D MTK6577 Official Thread: http://forum.xda-developers.com/showthread.php?t=1847136

    WARNING: You do it with own risk ! I don't responsible for any damage to your phone.

    Thread logs ( New ! ):
    *** On 1 September 2012 *** Rearrange the thread to make it easier to read and follow :D


    *UPDATE 1* Here is my 4Shared folder: Haipai I9220 MTK6575 which is including: vold.fstab, Mtk6575 USB Driver, latest flashing tool and the firmware as well as a root file FOR HAIPAI I9220 ONLY. Hope this help ;)

    How to root: All credits to Bthoven and download links are brought to you by zBeYuz

    1.Please download root file from the link above.
    2.Go to settings-developer options-click USB debugging.
    3.Connect the phone with computer,turn on usb device.
    4.Click the file you download from the link TPSparkyRoot.bat
    5.Your phone will restart first time,after the phone start finish(until you see the unlock),click enter in the window of TPSparkyRoot.bat.
    6.The phone will restart second time,still the same as first time we did.Then start third time,same as we did in last two times.Click enter then phone was rooted.
    7.You will see two more app was installed in your phone that means root phone successfully.

    After successfully rooted, it will install root explorer.apk Chinese version which is rather useless for installing Market because it's all in Chinese. Thus, you need to download this "ES File Explorer" in order to put Google Play into the system folder. People who have a problem when installing Google Play by using apk, for example: Error processing purchase [DF-BPA-13]

    Here is how to install a new and working Google Play Store:

    1. Download "Vending.apk" from the same mediafire folder above.
    2. Copy Vending.apk to \system\app\ folder in your phone by using ES File Explorer in root explorer mode with system file mounted.
    3. Change permission of Vending.apk to Read/Write for Owner; Read for others (rw-r--r--)
    4. Shutdown your phone.
    5. Switch on your phone, you will see Google Play Store app, and Enjoy !


    *UPDATE 2* Here is a custom firmware ( most of functions are working and rooted ) , all credits to yiminghung and angelobiz, as usual general instruction and faster links are brought to you by zBeYuz :D

    0. How To Flash Haipai Noble I9220 Firmware On YouTube By Angelobiz

    1. Before upgrade to this firmware, remember to backup all your apps using My Backup or Titanium Backup so that we can restore those apps later.
    Download ADB driver if you have not installed it ( Tested on Windows 7 )
    You must have debug usb active in your phone. this driver need for use adb command example for root script or use MTP function.

    2. Download firmware + flashing tool + drivers from here: May 7 Firmware With New System.img
    OR Only Driver For Haipai I9220: Drivers

    3. Unrar the firmware, turn off your phone and take the out battery, then plug the phone into your PC.

    4. Install the driver from the firmware folder that you unrar before, then plug out the phone.

    5. a) Go to Flashtool folder and run SPMultiPortFlashDownloadProject.exe
    b) Choose Factory Database --> Setup data source file: "MTK_DATABASE.mdb"
    c) Choose File --> Open download agent file: "MTK_AllInOne_DA.bin"
    d) Choose Scatter File: "MT6575_Android_scatter_emmc.txt" in Firmware folder.
    e) Choose the figure same as the picture: SmartPhone MPD.jpg, which can be found in Firmware folder.

    6. Make sure the phone turned off and the battery was taken out. Click Start All and plug your phone into the PC then wait about 5-10 minutes for the flashing process to finish ( Write OK ! ).

    7. After it is done, we are good to change the IMEI. However, before that try to turn on the phone to see whether the phone is working or not.

    8. If everything is ok, excepted IMEI was missing, download IMEI Changer Tool from here: IMEI Changer For Mtk6575

    9. Unrar, install the program and run SN_STATION, which can be found on your desktop. Follow the instruction in the Chinese manual, but we only need to follow the picture in that manual.

    The file "Modem Database" and "AP Database" is in firmware folder. You need to choose exactly the file that you see in the picture.

    10. Write down two IMEIs on the back of your phone ( you need to take the battery out to see it ).

    11. Again turn off your phone and take the battery out, then plug the phone into your PC, but this time we need to put the battery back in very quickly as soon as we see:
    "COM port searching and preloader handshake ok" on SN Writer Log.

    11. Wait until "Write Result Indicator" becomes green, then the IMEI has changed successfully.

    OR you can try to change your IMEIs by using ZOPO IMEI ( Thanks to colouriste )

    1. REMOVE SIM CARD(S) FIRST !
    2. Check "Dual Imei"
    3. Type in original IMEI #'s 1 & 2 and then
    4. Click "Write"

    Enjoy the new firmware with GPS working, wifi improved, front camera working, beautiful font and more...

    2-1) Here a online translation of custom recovery in English: ( Thanks to angelobiz )
    http://tabletrepublic.com/forum/cortex-a9-ti-omap-4/smartq-clockworkmod-recovery-menu-%5Btranslated%5D-2037.ht-l

    2-2) Haipai i9220 Data to 2.5gb ( UPDATED ! )
    ? What is it ? 2.5gb data means never again out of storage for apps. You lose "internal sdcard". Only useful if you have hardware sdcard
    http://www.mediafire.com/?8n1u8n72180iggd


    *UPDATE 3* ( Quote from angelobiz. Thanks a lot for your hard work, Angelo. You are rock !!! :D)

    "Now we have all we need for make a firmware without bug!!!

    Thanks to Johnny Hung from Taiwan for fix network location and Google Apps
    Thanks to Resquer from Russia for English Recovery
    Thanks to Chinese man that make a script for root
    Thanks to me from Italy for collect all this information
    Thanks to all that i no remember from World ( by XDA and Iphone.ru)
    a very example of International Cooperation...
    If our governments do the same ... the world would be better !

    Change log:

    Google Apps
    Network Location
    GPS
    2gb of ram for data
    Custom Recovery CWM in English
    Full Stock Firmw!re (boot, preloaded, modem etc etc...)
    Change Imei
    After i find a script for remove ads form app: It is working!!! youkneed replace with original file.
    "Beats Audio" I have installed it with custom recovery... but no there is any apps to use it...only when you play music, you have difference... but i don't like play music so i don't know if make a difference.... you try it!!
    Only 1 bug have our phone.. but i thinks that it is a hardware bug, so we cannot solve with upgrade a firmware:
    "Wireless signal isn't very high"

    Download:

    Angelobiz's folder

    Install:

    Please refer to Update 2 - Step 1 to 6 on how to flash a new firmware


    *UPDATE 4* ( Quote from angelobiz. Thanks a lot for your hard work :D)
    "New ROM by AngeloBiz, based on kernel of 5 June.

    If something doesn't work, you can restore your phone with stock firmware :)

    Make a backup of your data or apps with Titanium Backup or same apps. The flash erase all your data, and the nandroid backup won't work if it is of previous kernel ( in my phone don't work anymore 3G, after restore of data nan-droid backup of 14 May kernel)

    Change log:

    Kernel 05 June
    Root Enabled
    Change logo battery, now with %
    change host file, no ADS .-)
    rename com.Google.android.features.vendor.xml
    change logo.bin, boot logo and boot animation (no brands)
    add some sounds
    add some useful apps
    no Chinese apps
    Repartition Fix (you will have: Internal memory 2gb, SD1 external sd, SD2 512mb)
    Backup and restore work only with this version of kernel

    Download:

    Stock Firmware of 5 June
    http://www.mediafire.com/?e2f9h8bfb1f66
    Angelobiz v.2.0 Update.zip
    http://www.mediafire.com/?o9d7g9c9xurk3

    Install:

    Download stock firmware of 5 June:
    You must flash all firmware !!!
    Start your phone
    Copy the update.zip in your sd card.
    Go in the recovery mode:
    With phone off, you hold volume + and power together.
    Go to "install zip from sdcard"
    Go to "choose zip from sdcard"
    Choose right update.zip
    Apply :)
    Wait...... Wait....
    Reboot your phone"

    If you are stuck at Booting Screen, please try those tips below ( For UPDATE 4 Only ): by zBeYuz :laugh:

    1. Did you forget to extract your system.zip in firmware stock 05 June folder ?
    I just found out earlier that I totally forgot about it .
    Just extract that file you will get system.bin then delete system.zip and start to flash the firmware normally. ( Booting up will take about 3-5 minutes after it is done ).
    If the phone is still stuck please consider the next step...

    2. One more thing to take note, I am using different flash tool from angelobiz:

    You can refer how to flash with this flash tool here:

    0. Driver must be installed: http://www.4shared.com/rar/9onOaDl5/Driver_New.html? ( Please refer to UPDATE 2 for more details )

    1. Download Only Flash Tool: http://www.4shared.com/rar/v8txho3k/Flashing_Tool.html?

    2. a) Go to Flash tool folder and run SPMultiPortFlashDownloadProject.exe
    b) Choose Factory Database --> Setup data source file: "MTK_DATABASE.mdb"
    c) Choose File --> Open download agent file: "MTK_AllInOne_DA.bin"
    d) Choose Scatter File: "MT6575_Android_scatter_emmc.txt" in Firmware folder.
    e) Choose the figure same as the picture (Setting f/r SmartPhone MPD.jpg), which can be found in Firmware folder.

    3. Make sure the phone turned off and the battery was taken out. Plug the phone into the PC and wait about 5-10 minutes for the flashing process to finish ( When you see it becomes green and states that "Write OK" ).


    *UPDATE 5* ( Quote from angelobiz :D)

    Change log: Thanks to Johnny !!!

    You can choose re-partition fix that you want ( Please download from folder 2 below either 2.5GB or 2GB Fix ).
    Now data restore from nandroid backup work with new recovery.img !!!!
    You can flash 2.5gb re-partition fix now !! It hasn't had bugs now !!!
    New launcher and new icons
    Root Inside
    Host updated for no ads
    Beats Audio inside for better sound
    News useful apps
    Minor bug fix
    Change battery icon

    Download:

    1 - 19 June Firmware ( Download all the files in this folder and put all in one place - remember to extact system.rar )

    Re-uploaded: preloader_e1809c_v75_lx528_sx
    http://www.4shared.com/file/NsworLYX/preloader_e1809c_v75_lx528_sx.html

    Re-uploaded: uboot_e1809c_v75_lx528_sx
    http://www.4shared.com/file/1cAAxMvd/uboot_e1809c_v75_lx528_sx.html

    2 - Angelobiz 3.2 Update ( 3 Files ) + New Recovery.img + Re-partition Fixes ( 2 Files ) ( For a new recovery.img, put it inside the 19 June Firmware and flash as normal )

    Install:

    - If you have old firmware before 19 June, you must flash all firmware of 19 June ( Please refer to Update 2 - Step 1 to 6 on how to flash a new firmware )
    After you have 19 June firmware, then copy Angelobiz 3.2 update.zip on your SD , start in CWM recovery ( Hold Volume + and Power button together ) then launch Angelobiz 3.2 update.zip

    - If you have 19 June Firmware with CWM:
    copy update.zip on your SD , start in CWM recovery, and launch Angelobiz 3.2 update.zip

    - If you have 4 or 5 June firmware with CWM
    copy Angelobiz 3.2 update.zip on your SD , start in CWM recovery, and launch Angelobiz 3.2 update.zip


    Tips + Tricks:

    1. Thanks mikeysteele: "One thing I noticed after installing Set CPU is the kernel defaults to the Performance Governor. This means the CPU is always running at the maximum frequency so that might explain the poor battery life. I changed it to the On Demand governor and my battery life has improved."

    2-a. Thanks angelobiz: For remove old, hidden driver you can see this: http://www.tech-recipes.com/rx/504/how-to-uninstall-hidden-devices-drivers-and-services/

    2-b. Thanks caviar44: This is a tool to remove old drivers: USBDeview v2.11. Just right click on driver instance and then choose "uninstall selected devices".

    3. Moborobo - The Android Smartphone PC Manager ( You can use it to install apps, make a backup, blah blah :D ) : Moborobo

    4. For people who want to have better WiFi signal please refer to those picture as it show how to make some changes to the phone antenna. Antenna


    Good Luck~

    Thank me if you think you can :D

    FIGHTING !!!
    View
    6
    Y
    yiminghung
    New recovery / custom ROM for MTK6577-Haipai x710d / STAR N9770

    Haipai x710d (Dual core version MTK6577 processor)

    Custom recovery: (include the htc logo.bin and boot.img with root)
    http://115.com/file/dpanwe3r#Taiwan101-CWM-Recovery-X710d.rar
    custom ROM:
    http://115.com/file/be1hjuws#Taiwan101-Haipai-x710d-ICS-V.01-3.zip
    Official ROM(20120706): http://115.com/file/be1ljeh6

    STAR N9770
    Custom ROM:
    http://115.com/file/anpmlfg6#Taiwan101-STAR-N9770-ICS-V.01.zip
    Custom recovery:
    https://www.dropbox.com/s/6brhpeoi7us19wt/STAR-N9770_Custom_Recovery.zip?m


    Actually, now the official firmware had the bug , the imei will be lose after factory reset!
    so, If you want to Factory reset your phone, please into recovery mode , 3 wipe and then flash the custom ROM or flash official firmware !


    PS: please do NOT flash any zip or rom from mtk6575 system, MTK6577 / MTK6575 file partition different !!!!


    Johnny
    View
    4
    angelobiz
    angelobiz
    New rom by AngeloBiz, based on kernel of 5 june.

    WARNING: you made it with own risk! i don't want responsable of any damage.
    :)
    if somethings don't work :) you can restore your phone with stock firmware :)

    Make a backup of your data or apps with Titanium Backup or same apps. The flash erase all your data, and the nandroid backup don't work if it is of previous kernel ( in my phone don't work anymore 3G, after restore of data nandroid backup of 14may kernel)

    Changelog:
    • Kernel 05 June
    • Root Enabled
    • Change logo battery, now with %
    • change host file, no ADS .-)
    • rename com.google.anrdoid.features.vendor.xml
    • change logo.bin, bootlogo and bootanimation (no brands)
    • add some sounds
    • add some usefull apps
    • no chinese apps
    • Repartition Fix (you will have: Internal memory 2gb, SD1 external sd, SD2 512mb)
    • Resolution 240dpi
    What you need:
    Stock Firmware of 5 June (recovery.img is CWM recovery in English)
    http://www.mediafire.com/?e2f9h8bfb1f66
    Angelobiz v.2.0 Update.zip
    http://www.mediafire.com/?o9d7g9c9xurk3
    Sp Flashtool
    http://www.mediafire.com/download.php?7i906d966w22xu0
    Usb cable

    for flashing:
    Download stock firmware of 5 june
    You must flash all firmware!!!
    you see this guide
    http://www.youtube.com/watch?feature=player_embedded&v=Zhds67Cehtg
    after
    Start your phone
    copy the update.zip in your sd card.
    Go in the recovery mode:
    with phone off, you hold volume + (plus) and power together.
    now you are in CWM Recovery.
    go to "install zip from sdcard"
    go to "choose zip from sdcard"
    choose right update.zip
    apply :)
    wait...... wait....
    reboot your phone.

    ok, now you have a new good phone
    Please refere me for bugs,any comment or any suggestion
    Angelo
    View
    4
    ronbo76
    ronbo76
    Read and heed - You have to read the whole thread

    Funny that you should quote me without fully posting the quote (which comes from part of the older procedure as card is misspelled) or thanking me but what the hey. As per my post here on Haipai June 5 ROM improved XP flash instructions XPflash. Linked Rooting Procedures (which is also included in this post), is the CAVEAT:


    READ THIS ENTIRE POST FULLY AND DO NOT DO IT UNTIL YOU'VE PRACTICED IT IN YOUR MIND SEVERAL TIMES AND FEEL READY TO DO THE REAL THING. YOU ONLY HAVE YOURSELF TO BLAME IF YOU DO SOMETHING WRONG.


    Things, procedures and even files change. While the first post is very helpful in getting a new user started, it is not the "be all, end all". If you as a new user to potentially a new operating system like Android are willing to brick your phone or its components by not fully reading this thread and determining for yourself that you FULLY UNDERSTAND everything you need to know and do about flashing or rooting your phone, YOU ONLY HAVE YOURSELF TO BLAME FOR THAT.

    That's why newbies in Dodge City did not last long.

    Oh BTW, while my post there is fairly current, I modified it again last Thursday with a friend but am waiting to update it upon three more test installations with a new Haipai i9220. None of us are getting paid to do what we are posting here or to update it and if you really want to thank someone, send a donation to angelobiz via PayPal or Resquer.

    I tell you what, whenever Resquer posts, I stop everything I am doing, sit up and read him fully. Then I thank his posts along with angelobiz as they are the masters. Me, I am an padawan in training but I wield a mean lightsaber and Qui-Gon Jinn has nothing on me!!!



    June 5 ROM improvement link:
    http://forum.xda-developers.com/showpost.php?p=27346245&postcount=691



    ***PLEASE NOTE*** - The first couple of steps to flash a ROM and ROOT your phone are the same because XP needs to FIND the phone FIRST

    READ THIS ENTIRE POST FULLY AND DO NOT DO IT UNTIL YOU'VE PRACTICED IT IN YOUR MIND SEVERAL TIMES AND FEEL READY TO DO THE REAL THING. YOU ONLY HAVE YOURSELF TO BLAME IF YOU DO SOMETHING WRONG.

    Recommend printing out this post when you flash your phone.


    Driver Installation
    Install Android SDK package on your computer system. Make sure that you have Android 4.03 installed as a package. After initial installation, check for updates and update those necessary for Android 4.03.

    Download the MT6575 USB VCOM drivers . This is a 7z file and you might need 7zip software to unzip this type file:
    http://www.mediafire.com/?f4fs2rcwe5zmcvl

    7zip these two files to a seperate directory (recommend called C:\MT6575).

    Download the MT65x3 USB VCOM drivers (different set of RAR files):
    http://www.mediafire.com/download.php?7vcpw08njg1xgfy

    Unrar this directory of files to a different directory (recommend call C:\Android USB drivers).

    Turn on your phone, Go to setting-developer options-click USB debugging. On the same screen, turn on or Allow Mock Locations and Stay Awake (for keeping the screen always on while charging).

    Connect your phone via the USB cable.

    Your XP computer should now find new hardware that needs to be installed.

    Use the manual setting to use the directory for the MT6575 USB VCOM drivers you un7zipped to C;\MT6575 directory.

    XP will install these drivers as a MT6575 device and it will also be a mass storage device.

    On your computer, go to the C:\Android USB drivers directory. Go to the directory, called MT65x3 USB VCOM drivers. Double click InstallDriver.exe to install the XP MT65x3 drivers.

    XP should now recognize your phone.

    Click the USB tray icon to safely disconnect the phone. You will need to disconnect it twice as a USB storage drive first and Android Device second.

    Reboot your computer and do not connect anything to it or run any other programs.

    At this time your phone is now ready to be ROOTed or have a new ROM installed.


    ROM Flashing
    Download all the files into a new XP directory (recommend call June 5) in this link (20 total):
    http://www.mediafire.com/?e2f9h8bfb1f66#

    UnRAR the system.rar in this directory and delete the original RAR file prior to flashing your ROM. THIS IS VERY IMPORTANT!

    Download Angelobiz update.zip and copy it to your SD card. Recommend putting it in a directory called UPDATES (DO NOT UNZIP IT).
    http://www.mediafire.com/?o9d7g9c9xurk3

    Download SPflashtool.rar and unrar it to your computer;
    http://www.mediafire.com/download.php?7i906d966w22xu0

    Prior to flashing the new June 5 ROM, watch this youtube video which details the flash procedures:
    http://www.youtube.com/watch?feature=player_embedded&v=Zhds67Cehtg

    After downloading all the files,unzip the system.rar file into the June 5 ROM directory, reboot your computer and do not have any programs running or any other USB device attached.

    Start SPFlashtool on your computer.

    Select the scatter.txt in the June 5 directory where you stored the 20 files.
    Select or choose (fill in the check box) all the files listed on this menu.

    Turn off your phone and remove the battery.

    Click the download button on the SPFlashtool menu.

    Attach your phone (phone is OFF with battery removed) via the USB cable to your computer.

    Wait for the SPFlashtool to find your phone as a MediaTek device on one of Ports (Port number may vary).

    BE VERY PATIENT and wait for the files to be downloaded or flashed to your phone.

    When it is completely flashed, remove your phone after the box pops up saying you have a new phone.

    Replace your battery but do not turn it on as normal.


    Recovery Mode Entry to finalize new ROM Flash
    Hold the volume up key first and then press the power on button to enter recovery mode.

    Select "install zip from sdcard" using the volume buttons from the recovery menu items.

    Select"choose zip from sdcard"

    Choose the directory on your SD card where you have the update zip file stored.

    Run or choose it with the power button.

    Select the right update.zip Select it using the volume buttons.

    Run or choose it with the power button.

    Wait, be patient and wait.

    Your screen will flash several different parts of the update zip file and pause several times. Sit on your hands and do nothing until you are very sure the recovery flash is done.

    Reboot your phone.


    Successful Flash
    If you've done it right, your phone will show a bright green "running rain or static stuff" from top to bottom with an Android robot on screen. You will hear a loud long noise.

    Set up your phone by going to system; set date, time, time zone.

    Go to System Utilities. USB Debugging should not be checked unless you are going to root or flash a ROM.

    On the same screen, turn on or Allow Mock Locations and Stay Awake (for keeping the screen always on while charging). Recommend leaving these always checked.

    Check out Storage on the system menu.

    If you can only see the internal storage you will need to download the alternate partition zip file (DO NOT UNZIP IT).


    Alternate SD Card Repartition due to a failure to see SD card
    Download the alternate partition zip file (DO NOT UNZIP IT)
    http://www.mediafire.com/?1b114ii0ylqhmug

    Install this zip file by following the same steps you used in recovery mode (please see Recovery Mode section above) to apply the update zip file.

    Enter Recovery Mode and follow the same procedures to install the alternate partition zip file.

    Exit Recovery Mode by the menu reboot.

    Go to the system menu and Storage. If you can now see the internal memory and SD card. Your phone is now flashed. Root it again as per the XP Flash Procedures.

    For XP Rooting Procedures, please see my newer post:
    http://forum.xda-developers.com/showpost.php?p=27568520&postcount=828


    spiro9210 said:
    IF YOU ARE HAVING PROBLEMS WITH SD CARD AFTER FLASHING JUNE 5TH FIRMWARE AND ANGELO 2.0 FIX, THE ABOVE WILL HELP YOU.

    Unfortunately, the first post has been edited and makes no mention of this vital step. I had to search the thread to find a solution. If original OP can take note of this, it will help a lot of new i9220 owners. Thanks
    Click to expand...
    Click to collapse

    Alternate SD Card Repartition due to a failure to see SD car
    Download the alternate partition zip file (DO NOT UNZIP IT)

    Card was misspelled in the procedures that were modified upon my subsequent post which told me where the post had been quoted from.
    View
    4
    bthoven
    bthoven
    bthoven said:
    After rooting my phone, I have successfully install Google Play Store. What a perfect phone now, for the price!.

    Will post details tonight.
    Click to expand...
    Click to collapse

    This is from my seller and it works.

    1.Please download root file on
    www.t-kstore.com/4.0root.rar
    2.Go to*setting-developer options-click USB debugging
    3.Connect the phone with computer,turn on usb device.
    4.Click the file you download from the link TPSparkyRoot.bat*
    5.Your phone will restart first time,after the phone start finish(until you see the unlock),click enter in the window of TPSparkyRoot.bat.
    6.The phone will restart second time,still the same as first time we did.Then start third time,same as we did in last two*times.Click enter,then phone was rooted.
    7.You will see two more app was installed in your phone,that mean root phone successfully.

    After successfully rooted, it will install rootexplorer.apk Chinese version which is rather useless for installing Market because it's all in Chinese. You should be able to find Filexpert.apk from the web, and install it.

    Here is how to install Google Play Store:
    1. Download Vending.apk from http://downloads.androidadvices.com/apks/Vending.3.3.12.apk
    2. copy Vending.apk to \system\app\ folder in your phone by using Filexpert in RW mode
    3. change permission of Vending.apk file to Read/Write for Owner; Read for others
    4. shutdown your phone.
    5. switch on your phone, you will see Google Play Store app, and enjoy!
    View

New posts