Hard Bricked (EDL) moto g9 play XT2083-1

[\Pingo]

Help needed

My device is on EDL mode ( showing on device manager as Qualcomm HS-USB QDLoader 9008).

I tried every single blankfash file from lolinet and my device not booted.

Mine is the brazillian version (XT2083-1_GUAMP_RETBR).

Someone have the correct file for Blankflashing my device or other solution for my problem?

Thanks in advance.

 

[RMS100]

Hello friend, I created a Blankflash based on the latest version of android 11 (RPX31.Q2-58-17-7), it worked for me, if you want to try it do it at your own risk, I am not responsible for any possible problems let it happen.

 

[\Pingo]

Hello friend, I created a Blankflash based on the latest version of android 11 (RPX31.Q2-58-17-7), it worked for me, if you want to try it do it at your own risk, I am not responsible for any possible problems let it happen.

Worked fine for me, thank you.

 

[vtrxz]

my phone also returned to image, what did you do after that?

 

[RMS100]

my phone also returned to image, what did you do after that?

You can use this tool from motorola to flash the latest Stock Rom on your device: https://www.motorola.com/us/rescue-and-smart-assistant/p

 

[vtrxz]

Thank you very much, my phone is working again thanks to you

 

[Leardy]

Olá amigo, criei um Blankflash baseado na última versão do android 11 (RPX31.Q2-58-17-7), funcionou para mim, se você quiser experimentar faça por sua conta e risco, não me responsabilizo por quaisquer problemas possíveis deixe acontecer.

God bless you my friend, save me a lot!!!

 

[[Oppa~]]

Hello, I had the same problem and managed to get out of EDL mode, but when trying to install the stock rom via fastboot, an error occurred and, in the failed attempt to solve it, I ended up blocking the bootloader. Now I have my device bricked and the bootloader is locked.

I've already used Rescue and Smart Assistant and it can't finish the process. I can't flash any roms through adb either. It really is a misfortune.

Below is the information about my device:

C:\Users\whoami\Desktop\platform-tools>fastboot getvar all
(bootloader) kernel: uefi
(bootloader) version-bootloader: MBM-3.0-guamp_retail-252ee94a78-220503
(bootloader) product: guamp
(bootloader) board: guamp
(bootloader) secure: yes
(bootloader) hwrev: PVT
(bootloader) radio: LATAM
(bootloader) storage-type: eMMC
(bootloader) emmc: 64GB SAMSUNG DP6DAB RV=08 PV=02 FV=0000000000000002
(bootloader) ufs: N/A
(bootloader) ram: 4GB SAMSUNG LP4x DIE=16Gb M5-M8=01 07 01 12
(bootloader) cpu: SM_KAMORTA_H 1.0
(bootloader) serialno: 0073117509
(bootloader) cid: 0x0032
(bootloader) channelid: 0x19
(bootloader) uid: B74625DD
(bootloader) securestate: flashing_locked
(bootloader) factory-modes: disabled
(bootloader) verity-state: enforcing (0)
(bootloader) iswarrantyvoid: yes
(bootloader) max-download-size: 804464640
(bootloader) reason: UTAG bootmode configured as fastboot
(bootloader) imei: 352234676210270
(bootloader) imei2: 352234676210288
(bootloader) meid:
(bootloader) date: 04-30-2021
(bootloader) sku: XT2083-1
(bootloader) carrier_sku: XT2083-1
(bootloader) battid: SB18C45530
(bootloader) battery-voltage: 3904
(bootloader) iccid:
(bootloader) cust_md5:
(bootloader) max-sparse-size: 268435456
(bootloader) poweroffalarm: 0
(bootloader) ro.carrier: retbr
(bootloader) ro.build.fingerprint[0]: motorola/guamp_retail/guamp:11/RPX
(bootloader) ro.build.fingerprint[1]: 31.Q2-58-17-7/c9ebb:user/release-k
(bootloader) ro.build.fingerprint[2]: eys
(bootloader) ro.build.version.qcom: LA.UM.9.15.r1-02200-KAMORTA.0
(bootloader) version-baseband: HA10_32.40.02.106R DFLT_FSG
(bootloader) kernel.version[0]: Linux version 4.19.157-perf+ (nobody@and
(bootloader) kernel.version[1]: roid-build) (clang version 10.0.7 for An
(bootloader) kernel.version[2]: droid NDK, GNU ld (binutils-2.27-bd24d23
(bootloader) kernel.version[3]: f) 2.27.0.20170315) #1 SMP PREEMPT Fri A
(bootloader) kernel.version[4]: pr 29 11:24:11 CDT 2022
(bootloader) git:xbl: MBM-3.0-guamp_retail-0ed29cb2f-220503
(bootloader) git:xbl_config: MBM-3.0-guamp_retail-0ed29cb2f-220503
(bootloader) git:abl: MBM-3.0-guamp_retail-252ee94a78-220503
(bootloader) git:rpm: MBM-3.0-guamp_retail-834e250d-220503
(bootloader) git:tz: MBM-3.0-guamp_retail-2c435ecc4-220503
(bootloader) git:hyp: MBM-3.0-guamp_retail-2c435ecc4-220503
(bootloader) git:devcfg: MBM-3.0-guamp_retail-2c435ecc4-220503
(bootloader) git:keymaster: MBM-3.0-guamp_retail-4b088521-220503
(bootloader) git:storsec: MBM-3.0-guamp_retail-4b088521-220503
(bootloader) git:uefisecapp: MBM-3.0-guamp_retail-4b088521-220503
(bootloader) gitrov: MBM-3.0-guamp_retail-2c435ecc4-220503
(bootloader) git:qupfw: MBM-3.0-guamp_retail-2c412ce-220503
(bootloader) frp-state: protected (77)
(bootloader) current-slot: a
(bootloader) running-bl-slot: _a/_a
(bootloader) running-boot-lun: 0
(bootloader) slot-count: 2
(bootloader) slot-successful:_a: no
(bootloader) slot-successful:_b: no
(bootloader) slot-unbootable:_a: no
(bootloader) slot-unbootable:_b: no
(bootloader) slot-retry-count:_a: 4
(bootloader) slot-retry-count:_b: 7
(bootloader) logical-block-size: 0x200
(bootloader) erase-block-size: 0x200
(bootloader) is-userspace: no
(bootloader) pcb-part-no: SB28D19213
(bootloader) primary-display: hlt_ili9882h_video_display
(bootloader) secondary-display:
all: listed above
Finished. Total time: 0.125s

 

[L1p3Droid_BR]

friend, I have the same problem, the motorola updated and the version of the blankflash that I need is the version RPXS31.Q2-58-17-7-2 I looked in several places on the internet and it really doesn't have it. help!

 

[RMS100]

friend, I have the same problem, the motorola updated and the version of the blankflash that I need is the version RPXS31.Q2-58-17-7-2 I looked in several places on the internet and it really doesn't have it. help!

Did you try the blankflash that was made available here? maybe it still works as the latest Motorola update was just a security patch.

 

[L1p3Droid_BR]

Did you try the blankflash that was made available here? maybe it still works as the latest Motorola update was just a security patch.

yes, I tried but without success.

 

[L1p3Droid_BR]

Did you try the blankflash that was made available here? maybe it still works as the latest Motorola update was just a security patch.

follows the photo, but it does not restart to fastboot. it is version xt2083-3 retbr

 

[RMS100]

follows the photo, but it does not restart to fastboot. it is version xt2083-3 retb

follows the photo, but it does not restart to fastboot. it is version xt2083-3 retbrView attachment 5701121

Ok, try this, download LSMA from motorola and try to run the fastboot commands with the device connected to the PC with the program already open. if the device is recognized, download the stock and install using the program.

 

[L1p3Droid_BR]

Ok, try this, download LSMA from motorola and try to run the fastboot commands with the device connected to the PC with the program already open. if the device is recognized, download the stock and install using the program.

the device does not turn on. even the cmd command saying that it was completed for fastboot, but it is false, it does not show any signal, it just exits edl mode only and unresponsive and does not recognize on the computer even with drivers and platform tools configured on the computer. It's a brick, it only enters edl at the moment, I believe only with the blankflash of the current version.

 

[L1p3Droid_BR]

Ok, try this, download LSMA from motorola and try to run the fastboot commands with the device connected to the PC with the program already open. if the device is recognized, download the stock and install using the program.

Worse than I've done it using LMSA, I left it in the background and it's still not recognized.

 

[RMS100]

Worse than I've done it using LMSA, I left it in the background and it's still not recognized.

Hello friend, I didn't find a specific firmware for your model (XT2083-3), apparently the only difference between this model and the XT2083-1 is the NFC, so I made this blankflash based on the latest firmware of the model XT2083-1. If you want to try, do it at your own risk, I am not responsible for any problems.

 

[L1p3Droid_BR]

Hello friend, I didn't find a specific firmware for your model (XT2083-3), apparently the only difference between this model and the XT2083-1 is the NFC, so I made this blankflash based on the latest firmware of the model XT2083-1. If you want to try, do it at your own risk, I am not responsible for any problems.

I tried, I didn't succeed. I tried, without success. this phone's software is hosted on lolinet. can you flash this software? Follow the link https://mirrors.lolinet.com/firmware/motorola/guamp/official/RETBR/

 

[RMS100]

Eu tentei, não tive sucesso. Eu tentei, sem sucesso. o software deste telefone está hospedado no lolinet. você pode mostrar este software? Siga o link https://mirrors.lolinet.com/firmware/motorola/guamp/official/RETBR/

Hi, I used exactly the firmware available on lolinet, I think unfortunately I can't do anything else for you.

 

[L1p3Droid_BR]

Hi, I used exactly the firmware available on lolinet, I think unfortunately I can't do anything else for you.

Thank you for making yourself available to help. It went into Hard brick after deleting the vendor by passing a gsi. At least the blankflash created can help another forum member.

 

[Tomiirossi]

hello someones knows where are the edl points in moto g9 play? i putted in contacts a lot of places and i cant know the place