Hard Bricked Moto G XT1033

[diegodvsa]

Hello, my girlfriend have a Moto G XT1033.
She unlocked the bootloader, then tried to upgrade the 4.4.4 for Lollipop, then the Moto G Bricked :c
I follow this tutorial http://forum.xda-developers.com/moto-g/help/how-to-unbrick-moto-g-falcon-t3394788, and successfully unbricked, but....
The boot loader get locket (status code: 0) and the phone show this message: Fastboot reason: failed to initialize partition table.

I tried to unlock the bootloader but with no success, and I tried to install the stock rom but the fastboot shows this on cmd "Permission denied. FAILED (remote failure)"

I need so much help, please, thank you!

 

[Professor Gibbins]

When restoring the stock ROM, did you run fastboot as administrator?

 

[diegodvsa]

When restoring the stock ROM, did you run fastboot as administrator?

Yes man, I did.

 

[jdawc7]

wrong rom proplem..
flash this rom..
dont use flashbat5.1 to flash..
use minimal adb to flash..
https://www.androidfilehost.com/?fid=24499762636005336

thanks for @Dinamos for this link

 

[diegodvsa]

When restoring the stock ROM, did you run fastboot as administrator?

wrong rom proplem..
flash this rom..
dont use flashbat5.1 to flash..
use minimal adb to flash..

thanks for @Dinamos for this link

Thanks man, I'll try this, then post the result.

 

[diegodvsa]

wrong rom proplem..
flash this rom..
dont use flashbat5.1 to flash..
use minimal adb to flash..

thanks for @Dinamos for this link

I successfully installed the rom, but the phone doesn't pass the bootloader message, and sometimes shows the android green robot flashing in the screen. How can I fix it?

Thank you!

 

[jdawc7]

I successfully installed the rom, but the phone doesn't pass the bootloader message, and sometimes shows the android green robot flashing in the screen. How can I fix it?

Thank you!

try into recovery mode to do wipe cache and wipe dalvik

 

[diegodvsa]

Worked! Thank you so much man, my girlfriend is very happy now! hehehe

 

[jdawc7]

Worked! Thank you so much man, my girlfriend is very happy now! hehehe

thats good,
can you share how ?

 

[diegodvsa]

I just followed the tutorial, then flashed the rom that jdawc7 posted above using adb and fastboot, then just wait the bootloader screen and the Motorola logo screen pass by. Again, thank you so much!

 

[skad00sh]

You need to format your storage.
Boot in fastboot mode and flash TWRP recovery.
In TWRP Wipe>Advanced Wipe>Repair filesystem.
You problems will be solved. Now you can even flash marshmallow roms instead of going back to kitkat ?

Sent from my Moto G using Tapatalk

 

[jdawc7]

I just followed the tutorial, then flashed the rom that jdawc7 posted above using adb and fastboot, then just wait the bootloader screen and the Motorola logo screen pass by. Again, thank you so much!

thanks,,
oh
thats mean the magic in that rom ..
so every one who facing proplem,
must try that rom that i put link ,

 

[fjgonzales88]

XT1032

I made a bad update of the system, my Xt1032 was left as a brick, but with a tutorial that I followed, I managed to activate it in fasboot mode, but since there it only stays in "failed to initialize partition table" and does not allow me to install anything, is there any way To recover it, for there lei that in the xt1033 could do it with some file that you published, there is something similar for my model beforehand thank you very much (excuse if it is written badly or expressed some phrase, is that I only speak Spanish and I use translator for To write in English

 

[childchinna]

wrong rom proplem..
flash this rom..
dont use flashbat5.1 to flash..
use minimal adb to flash..
https://www.androidfilehost.com/?fid=24499762636005336

thanks for @Dinamos for this link

thank u so much bro.....
i've searched all over the internet and finally u saved me!!! :fingers-crossed:

 

[w arun kumar]

wrong rom proplem..
flash this rom..
dont use flashbat5.1 to flash..
use minimal adb to flash..
https://www.androidfilehost.com/?fid=24499762636005336

thanks for @Dinamos for this link

how to flash this rom with minimal adb to flash? Sir, can you provide my some tutorial. that would be so grateful.

 

[w arun kumar]

wrong rom proplem..
flash this rom..
dont use flashbat5.1 to flash..
use minimal adb to flash..
https://www.androidfilehost.com/?fid=24499762636005336

thanks for @Dinamos for this link

Thank you so much. this rom saved my phone. i was facing the same issue as everyone. my phone was hard bricked and i tried all the steps ways, everything but it didt worked. thanks again

 

[Abhhisheky]

I can't flash anything on my device i think the flash memory is dead how can i re partition my system ?

 

[bouba148]

Hi Team, I have the exact same issue

I've installed minimum adb fastboot but how to use it: it's just explained NOT to use flash5.1 ............OK but which command lines to use and from where?
I've copied the content of minimal adb fastboot in the ROM folder and run it from there, then used the command line: "fastboot.exe flash partition gpt.bin" to start but it failed:

(bootloader) slot-count: not found
(bootloader) slot-suffixes: not found
(bootloader) slot-suffixes: not found
(bootloader) has-slotartition: not found
target reported max download size of 536870912 bytes
sending 'partition' (32 KB)...
OKAY [ 0.050s]
writing 'partition'...
(bootloader) Preflash validation failed
FAILED (remote failure)
finished. total time: 0.360s

I've also tried to Hard brick it using the Bootloader Bricker tool ( to allow me to perform a blank flash ), even that tool has not the permission to write the bootloader and reboots to fastboot mode as usual.......