• Introducing XDA Computing: Discussion zones for Hardware, Software, and more!    Check it out!

[Hard Bricked] [QHSUSB_BULK] [HELP] N9005 - Kitkat 4.4.2

Search This thread

Allenzo

Member
Jan 20, 2008
47
4
Rabieh
Hello,

My phone is bricked:
- No light while charging
- Won't Boot
- Wont boot with debrick.img on the sd card

the only option available is QHSUSB__BULK when connecting to windows but not recognized by ODIN 3.09

can somebody assist or know how to fix it? it may help others also.

thanks.

AllenZo
 
Last edited:
  • Like
Reactions: Julian_Correa

radicalisto

Senior Member
Nov 13, 2013
3,731
1,511
York
Hello,

My phone is bricked:
- No light while charging
- Won't Boot
- Wont boot with debrick.img on the sd card

the only option available is QHSUSB_BULK when connecting to windows but not recognized by ODIN 3.09

can somebody assist or know how to fix it? it may help others also.

thanks.

AllenZo

Have a search round there is an SD Card way of fixing (not 100% guaranteed) but people report it works OK. How did you brick it?
 

Allenzo

Member
Jan 20, 2008
47
4
Rabieh
Have a search round there is an SD Card way of fixing (not 100% guaranteed) but people report it works OK. How did you brick it?

Hello radicalisto,

Thank you for the reply, i bricked it when i did the below
Code:
dd if=/dev/block/mmcblk0p6 of=recovery.img_orig
dd if=recovery.img of=/dev/block/mmcblk0p6
while trying to run Kali Linux on it.

the method i found is for QHSUSB_DLOAD, I tried to look for QHSUSB_BULK without success...only 4 results in google but not so helpful.
 

FeralFire

Senior Member
Jan 18, 2012
510
232
Code:
dd if=/dev/block/mmcblk0p6 of=recovery.img_orig
dd if=recovery.img of=/dev/block/mmcblk0p6

The dd command in linux is very dangerous if you don't know exactly what you are doing.

Since your phone won't respond to anything, your bootloader is probably fried.
You say that SDcard with unbrick.img did not work?

Did you write the image to the card or just copy the file?
 
  • Like
Reactions: radicalisto

Allenzo

Member
Jan 20, 2008
47
4
Rabieh
The dd command in linux is very dangerous if you don't know exactly what you are doing.

Since your phone won't respond to anything, your bootloader is probably fried.
You say that SDcard with unbrick.img did not work?

Did you write the image to the card or just copy the file?

yep, i wrote it on 4 different sd card just to make sure if one is not working, using win32diskimager.
 

Allenzo

Member
Jan 20, 2008
47
4
Rabieh
FIXED

Hello,

I fixed it by using a different SD card, make sure it is class 10 and 16GB, 32GB or 64GB.
-Download the debrick image from Here
-Download Win32DiskImager
-Download debrik.img
-Unzip both items and run win32diskimager
-Select Image File debrick.img
-Select Device ( put your sdcard in 16gb or 32bg )
-Click write ( note this will format your sdcard)

After finish put your Sdcard to your phone. Make sure you have battery more than 10% and it will boot to your ROM.

Thanks,

AllenZo
 
  • Like
Reactions: Julian_Correa

dagger19

Member
Dec 12, 2008
16
0
hello, i used a class 10, 32gb SD card, followed the steps faithfully and the phone is still as dead as before.
QHSUSB_BULK is shown when i connect to the pc.
I used win32diskimager and WRITE the .img to the sd card.

do i need to do a clean format on the sd card b4 writing .img on it?
did i miss out anything?
 
Last edited:

WhateverMan2

Senior Member
Feb 20, 2014
347
145
Singapore
hello, i used a class 10, 32gb SD card, followed the steps faithfully and the phone is still as dead as before.
QHSUSB_BULK is shown when i connect to the pc.
I used win32diskimager and WRITE the .img to the sd card.

do i need to do a clean format on the sd card b4 writing .img on it?
did i miss out anything?


Yes you need to format your sd card. After that boot to download mode or just boot normally. If you followed the steps correctly download mode should show as "SDCARD MODE". Good luck!


N9005 NH1 32GB Stock debloated rooted ROM
 

firas bayzeed

New member
Oct 11, 2015
1
0
-Download Win32DiskImager
-Download debrik.img
-Unzip debrick and run win32diskimager
setup win32disklmanager on your computer
then start it and check the box copy
-Select Image File debrick.img
-Select Device ( put your sdcard any size work
-Click write ( note this will format your sdcard)

After finish put your Sdcard to your phone
then put full battery then plug your phone to your computer and start odin 3.09 then check all boxes in odin and press start several times then start your phone by pressing power button
now it's will start as normal but you still have to make bootloader for your phone
([email protected]): from Damascus/syria
 
Last edited:

RekiOneR

Senior Member
Jun 8, 2007
72
17
Orleans
Hi guys,
Do you know if this would be available for others divices?
I've a xiaomi redmi 3 bricked (the phone tryed to drink some water, stupid idea i would say) with the same diagnostic by my laptop "QHSUSB_BULK"
Many thanks guys!
 

Daniel. merciful

New member
Sep 28, 2016
3
0
Qhsusb_bulk

Hello dear friend I got a phone GALAXY Grand 2 G7102 recovery img unauthorized installation and break it not after the screen turns off and the driver shortage pc QHSUSB_BULK show

samsung SM-G7102

I've installed the recovery Grand duos on it

After the reboot page can not approach(show)

and i cannot use the :
download mode
factory rest
hard rest
i just can connect to pc and( QHSUSB_BULK missing) i have installed the driver but nothing
no viber , sound , ....... in the phone (samsung SM-G7102)

Thank you so much
 
Last edited:

Top Liked Posts

  • There are no posts matching your filters.
  • 1
    Hello,

    My phone is bricked:
    - No light while charging
    - Won't Boot
    - Wont boot with debrick.img on the sd card

    the only option available is QHSUSB__BULK when connecting to windows but not recognized by ODIN 3.09

    can somebody assist or know how to fix it? it may help others also.

    thanks.

    AllenZo
    1
    Code:
    dd if=/dev/block/mmcblk0p6 of=recovery.img_orig
    dd if=recovery.img of=/dev/block/mmcblk0p6

    The dd command in linux is very dangerous if you don't know exactly what you are doing.

    Since your phone won't respond to anything, your bootloader is probably fried.
    You say that SDcard with unbrick.img did not work?

    Did you write the image to the card or just copy the file?
    1
    FIXED

    Hello,

    I fixed it by using a different SD card, make sure it is class 10 and 16GB, 32GB or 64GB.
    -Download the debrick image from Here
    -Download Win32DiskImager
    -Download debrik.img
    -Unzip both items and run win32diskimager
    -Select Image File debrick.img
    -Select Device ( put your sdcard in 16gb or 32bg )
    -Click write ( note this will format your sdcard)

    After finish put your Sdcard to your phone. Make sure you have battery more than 10% and it will boot to your ROM.

    Thanks,

    AllenZo