• Introducing XDA Computing: Discussion zones for Hardware, Software, and more!    Check it out!

Hard-SPL for x7510 and some other useful releases

Search This thread

cmonex

Retired Recognized Developer
Jul 23, 2006
3,040
49
Budapest
ok, so you got it finally :)

this post deals with hardspl, the next one will deal with ROMs :)

Features:

- this is unsigned Hard-SPL and ignores CID too, so custom roms or dumped & reconstucted roms (and any htc rom update) can flash. but it enforces ATHE400 modelid (I patched it for that). so ATHE***** or ATHE100 roms will be rejected. ATHE400 or ATHE400** is accepted.
- also, this has SPL overwrite protection, so won't accidentally get overwritten. but if someone needs to revert to stock SPL for warranty reasons, a stock SPL downgrade package is also available here.
- if your x7510 gets stuck on booting OS, then I have another way to revert to stock SPL in the cases when warranty is needed, this is a new special feature of the overwrite protection!

Requirements:

- first, if you have x7500 or x7501, then do not flash this.
- to download a compatible hardspl package for x7500/x7501 go to the other Athena subforums.
- also, make sure you have .NET framework installed on your PC! if not, get it from http://www.microsoft.com/downloads/d...DisplayLang=en
- finally, if you have vista, WMDC update is recommended: http://www.microsoft.com/windowsmobile/en-us/help/synchronize/device-center.mspx

Instructions:

1) download Hard-SPL package from attachment, extract to an empty folder.
2) you must Have Phone Synced with PC in Windows Mobile!
3) run x7510_HSPL365.exe
4) follow steps in the RUU, and check on the device for prompts after PC shows loading bar.
5) it should go to tricolour screen now and say 3.05-OliNex (3.05 is for SSPL version, the original SPL is 3.05.0000)
6) SPL flashes, device automatically reboots, job done.
7) to confirm you got it installed, go into bootloader mode (tricolour screen!) and verify the screen shows 3.65-OliNex (3.65 is for Hard-SPL version, the original SPL is 3.05.0000).

NOTE: you will not see the SPL version during normal boot, that is the OS version, not SPL!
to enter bootloader mode to see version: with the device turned on, press and hold the camera button (ALL THE WAY IN) then press the reset button with the stylus tip, then release the camera button when bootloader tricolour screen appears.

NOTE 2: anyone having problems with the device entering SSPL automatically, please copy SSPL-Manual-x7510.exe from the SSPL-Manual-x7510.zip attachment to the device and run it. then once the screen is in SSPL, run RUU manually. i.e. you run the RUU on the PC, if it isn't obvious.

NOTE 3: do not use this RUU to flash anything else! this is only intended for flashing SPL's.

NOTE 4: flash stock SPL *only* if you need to return the phone for warranty. only use it as last step - after reflashing stock OS and radio. usage: run the hardspl exe but do not press Next yet then replace the RUU_Signed.NBH with the stock spl NBH (posted here too), then go flash.


enjoy! and if you are happy with the results, a donation is always appreciated to the first donation link in my signature ("To Cmonex" link). ;)
 

Attachments

  • x7510_HSPL365.zip
    1.4 MB · Views: 4,993
  • SSPL-Manual-x7510.zip
    655 KB · Views: 2,850
  • x7510_3_05_stockSPL_ForWarrantyOnly.zip
    236.6 KB · Views: 2,570
  • Like
Reactions: 1134

cmonex

Retired Recognized Developer
Jul 23, 2006
3,040
49
Budapest
stock ROMs and flashing utilities

1. customruu for x7510, grab it from attachment. use this to flash roms.
2. nbh building tool for x7510, in another attachment. just choose X7510 from device list to work with it.
3. some stock OS links (some taken from RUU some from dumped / reconstructed roms)

WWE (english) 19209: http://rapidshare.com/files/160439716/x7510_WWE_RUU_Signed_forATHE400.zip
WWE (english) 19217: http://rapidshare.com/files/160431134/x7510_WWE_19217_RUU_Signed_forATHE400.zip
GER (german) 19217: http://www.filedropper.com/x7510gerruusignedforathe400
CHT (taiwan chinese) 19209: http://rapidshare.com/files/159819583/x7510_CHT_RUU_Signed_forATHE400.rar and a mirror http://www.megaupload.com/?d=30L24D8W
NEW: WWE (english) 3.29.707 rom: http://rapidshare.com/files/169675908/x7510_WWE_3_29_707_RUU_Signed.zip
+ extrom for 3.29.707: http://rapidshare.com/files/173043400/3_29_707_extrom.zip

make a mirror for others too please if you can =)



NOTE: I haven't had some of these tested, please let me know if they all work fine

ohh, I also plan to port AP4 to x7510! =) maybe tomorrow.



enjoy! and if you are happy with the results, a donation is always appreciated to the first donation link in my signature ("To Cmonex" link).
 

Attachments

  • x7510Wrapper_CustomRUU.zip
    519.5 KB · Views: 1,586
  • nbhutillatest_x7510_1102.zip
    74.6 KB · Views: 1,012
Last edited:
  • Like
Reactions: 1134

sergiopi

Retired Senior Moderator
Dec 14, 2005
1,147
20
Rome
CMONEX.... I will be your supporter for the next presidential campaign!
Please give us a FULL 3.5 HARD-SPL also for ATHE100 owners, ;) to avoid the AP4 flashing , may be a single 1.2-3.5, with a dialog box to chose between 1,2 and 3.5 partition! :)

Athena owners Please DONATE to CMONEX, she is doing a really good job for ATHENA, and she never has done a preview of the work to push donation BEFORE the release, she just released the tools, as free gift.

I donate for this tool, even if I am just an ATHE100 owner!

P.S.:

I just receive the paypal statement, it is PAYPAL *WINDOWSCEMO" !!!!
I think this stand for windows CE mod... something, but SCEMO in italian means.... http://www.youtube.com/watch?v=CyOsulfpdY0
CMONEX I agree! Windows IS DUMB!
 
Last edited:

cmonex

Retired Recognized Developer
Jul 23, 2006
3,040
49
Budapest
yes there'll be a 3.5 standalone package soon for ATHE100. that's one nice idea of bundling both ATHE100 SPL's, I'll remember that when making it :)

btw that 3.5 SPL has a feature to accept OS of 0x410 NBH type, which was meant as the NBH type for 3.5 SPL ROMs, and that would of course not be accepted/flashed by 1.2 SPL, but that somehow got forgotten :( , so the SPL 3.5 roms are all still 0x400...
at least this mistake can't be made now for the ATHE400 SPL, the modelid feature is not something that can be forgotten about =P

thanks for the donation, really appreciated :D


PS: yes my paypal business name is Windows CE Mods - I don't speak italian so forgive me for the choice, hehe.
 

Calcu

Senior Member
Sep 15, 2006
144
13
Barcelona
OOOOOOOHHHHHHHH!!!!!!! Incredible! xDDDDD Thanks, thanks, thanks!
Now i'll begin to read and try to find HOW can i make an Spanish ROM for the x7510.. First of all i think a i need an original Spanish Rom no?
any idea of where to find it?
then i'll begin to read on how to make my rom.

Thanks!
 

theseas

Senior Member
May 7, 2008
92
0
I have flashed both versions of WWE x7510 posted on this thread. Both of them show the same specs on settings "about" and "device info".Has anyone comfirmed this?Even the rom date is the same.Also I have flashed the WWE clean rom of xacsx and still the same.And it is natural because he has used the same stock rom posted here.Cmonex maybe u have done a mistake and have uploaded the same file(?)Please check it out because the result will be tha we once we make a mistake we will make another one based on the first one like the clean WWE rom of xacsx if of course I am right.Thanx
 

Tadeusz

Senior Member
Feb 11, 2007
466
1
Warsaw
yes there'll be a 3.5 standalone package soon for ATHE100. that's one nice idea of bundling both ATHE100 SPL's, I'll remember that when making it :)

btw that 3.5 SPL has a feature to accept OS of 0x410 NBH type, which was meant as the NBH type for 3.5 SPL ROMs, and that would of course not be accepted/flashed by 1.2 SPL, but that somehow got forgotten :( , so the SPL 3.5 roms are all still 0x400...
at least this mistake can't be made now for the ATHE400 SPL, the modelid feature is not something that can be forgotten about =P

thanks for the donation, really appreciated :D


PS: yes my paypal business name is Windows CE Mods - I don't speak italian so forgive me for the choice, hehe.

Hi, CMONEX, Just sent you a donation. No: 5V8929312W355302M.
Bit late, as I was off for some time.
Could you give some info about how to use your tool to prepare our own ROM? What tool/kitchen can we use to mode the rom? Can it be Sogarth's kitchen, for example. If so then how to extract proper XIP for Athe400? Maybe my questions are not too good, but I am kind of noob in preparing roms.
 

Top Liked Posts

  • There are no posts matching your filters.
  • 1
    ok, so you got it finally :)

    this post deals with hardspl, the next one will deal with ROMs :)

    Features:

    - this is unsigned Hard-SPL and ignores CID too, so custom roms or dumped & reconstucted roms (and any htc rom update) can flash. but it enforces ATHE400 modelid (I patched it for that). so ATHE***** or ATHE100 roms will be rejected. ATHE400 or ATHE400** is accepted.
    - also, this has SPL overwrite protection, so won't accidentally get overwritten. but if someone needs to revert to stock SPL for warranty reasons, a stock SPL downgrade package is also available here.
    - if your x7510 gets stuck on booting OS, then I have another way to revert to stock SPL in the cases when warranty is needed, this is a new special feature of the overwrite protection!

    Requirements:

    - first, if you have x7500 or x7501, then do not flash this.
    - to download a compatible hardspl package for x7500/x7501 go to the other Athena subforums.
    - also, make sure you have .NET framework installed on your PC! if not, get it from http://www.microsoft.com/downloads/d...DisplayLang=en
    - finally, if you have vista, WMDC update is recommended: http://www.microsoft.com/windowsmobile/en-us/help/synchronize/device-center.mspx

    Instructions:

    1) download Hard-SPL package from attachment, extract to an empty folder.
    2) you must Have Phone Synced with PC in Windows Mobile!
    3) run x7510_HSPL365.exe
    4) follow steps in the RUU, and check on the device for prompts after PC shows loading bar.
    5) it should go to tricolour screen now and say 3.05-OliNex (3.05 is for SSPL version, the original SPL is 3.05.0000)
    6) SPL flashes, device automatically reboots, job done.
    7) to confirm you got it installed, go into bootloader mode (tricolour screen!) and verify the screen shows 3.65-OliNex (3.65 is for Hard-SPL version, the original SPL is 3.05.0000).

    NOTE: you will not see the SPL version during normal boot, that is the OS version, not SPL!
    to enter bootloader mode to see version: with the device turned on, press and hold the camera button (ALL THE WAY IN) then press the reset button with the stylus tip, then release the camera button when bootloader tricolour screen appears.

    NOTE 2: anyone having problems with the device entering SSPL automatically, please copy SSPL-Manual-x7510.exe from the SSPL-Manual-x7510.zip attachment to the device and run it. then once the screen is in SSPL, run RUU manually. i.e. you run the RUU on the PC, if it isn't obvious.

    NOTE 3: do not use this RUU to flash anything else! this is only intended for flashing SPL's.

    NOTE 4: flash stock SPL *only* if you need to return the phone for warranty. only use it as last step - after reflashing stock OS and radio. usage: run the hardspl exe but do not press Next yet then replace the RUU_Signed.NBH with the stock spl NBH (posted here too), then go flash.


    enjoy! and if you are happy with the results, a donation is always appreciated to the first donation link in my signature ("To Cmonex" link). ;)
    1
    stock ROMs and flashing utilities

    1. customruu for x7510, grab it from attachment. use this to flash roms.
    2. nbh building tool for x7510, in another attachment. just choose X7510 from device list to work with it.
    3. some stock OS links (some taken from RUU some from dumped / reconstructed roms)

    WWE (english) 19209: http://rapidshare.com/files/160439716/x7510_WWE_RUU_Signed_forATHE400.zip
    WWE (english) 19217: http://rapidshare.com/files/160431134/x7510_WWE_19217_RUU_Signed_forATHE400.zip
    GER (german) 19217: http://www.filedropper.com/x7510gerruusignedforathe400
    CHT (taiwan chinese) 19209: http://rapidshare.com/files/159819583/x7510_CHT_RUU_Signed_forATHE400.rar and a mirror http://www.megaupload.com/?d=30L24D8W
    NEW: WWE (english) 3.29.707 rom: http://rapidshare.com/files/169675908/x7510_WWE_3_29_707_RUU_Signed.zip
    + extrom for 3.29.707: http://rapidshare.com/files/173043400/3_29_707_extrom.zip

    make a mirror for others too please if you can =)



    NOTE: I haven't had some of these tested, please let me know if they all work fine

    ohh, I also plan to port AP4 to x7510! =) maybe tomorrow.



    enjoy! and if you are happy with the results, a donation is always appreciated to the first donation link in my signature ("To Cmonex" link).
    1
    Make sure you don't have sd card installed, also make sure the computer recognizes the device. Follow the instructions step by step.
    1
    Sorry can't help, I have not clue in sim unlocking a phone. If you want me to upload one of those files, lets me know.