hd2 stuck on startup all android rom

[tauqeer512]

hi
i installed many rom on hd2 via clk cwm .zip from sd card many rom stuck on start up but some starts but after restarting or powering off the the same problem with all roms plz help to boost ur thanks meter

 

[samsamuel]

Make sure you perform "wipe data factory reset" in cwm, to ensure the files on the ext and android folder on fat32 are cleared before flashing the rom.
If possible try a different SD card and sim, they can both cause issues occasionally.
Any stability issues on winmo?

 

[cubexe]

Just give us more info about that ..

Are you sure you are using correct system partition size?

Any SD-ext? Sense (big) roms?

Did you try complete reflash? (-> winmo -> hspl -> radio -> clk+cwm -> android)

You (We) can check your logcat, there should be answer for this issue.

 

[tauqeer512]

i dont know about the system partition i think this is the problem some roms need
160/5 mb system partition how to do this partition

 

[asbestos]

I had the same issue and I redownloaded and reinstalled CWR from this post:

http://forum.xda-developers.com/showthread.php?t=1044830

I used the 400mb file from the post.

Cheers

 

[samsamuel]

i dont know about the system partition i think this is the problem some roms need
160/5 mb system partition how to do this partition

any rom you flash will tell you in post 1 what size partition to use.

I had the same issue and I redownloaded and reinstalled CWR from this post:

http://forum.xda-developers.com/showthread.php?t=1044830

I used the 400mb file from the post.

Cheers

thats a fine fix, however if you flash a smaller rom to that, you will waste the extra space. so flash a 250 meg rom to a 400 meg partition, you will lose 150 meg, it wont be used for apps or data, the system will just ignore it.

 

[Cjovecje!]

Every time u flash do TASK29,RADIO,MAGLDR,CWR ,FORMAT SD,PARTITION SD then put rom on it then flash it. Everytime i do not follow that procedure i stuck on boot

 

[null acorn]

Always Task 29.

 

[theorogelio]

Every time u flash do TASK29,RADIO,MAGLDR,CWR ,FORMAT SD,PARTITION SD then put rom on it then flash it. Everytime i do not follow that procedure i stuck on boot

Hello guys,

I am experiencing the same problem with my HD2.

I have Tasked29, flashe MGLDR, CWR, formatted and partitioned SD, then placed ROM file and flashed. I reboot and the phone gets stuck on the HTC screen. The flashing of the ROM takes very little time. Before I had this problem, flashing a ROM would take longer than what it does now. It completes in about 10 seconds or less!

I can't figure out what's wrong. I had to re-install an old ENRGY Windows ROM; better than nothing! This ROM is working fine, even without the SD card.

I had been flashing CWR 4.0. I will flash 3.0.2.5 and see what happens.

Any one has any ideas please?

 

[tauqeer512]

Just give us more info about that ..

Are you sure you are using correct system partition size?

Any SD-ext? Sense (big) roms?

Did you try complete reflash? (-> winmo -> hspl -> radio -> clk+cwm -> android)

You (We) can check your logcat, there should be answer for this issue.

thanks for reply how can i make partition i have problem with my phone usb port board damage and could not connect to pc. help plz

 

[Marvlesz]

thanks for reply how can i make partition i have problem with my phone usb port board damage and could not connect to pc. help plz

Follow this tutorial by kylew1212 to install cLK 1.5 . (don't forget to thank him)
After it installs, boot while holding the back button > Settings > Repartition NAND > *After you finish selecting your sizes* choose "COMMIT" .

Phone will reboot, then go to "Recovery" and flash your rom from there.