my Moto G7 Power has suffered a hard brick and need the blank flash anyone has?
If you send me the download link.
If you send me the download link.
[HELP]Blank Flash For Moto G7 Power
- Thread starter Samuel TS
- Start date
Can you use the fastboot menu - it's it working (power on with volume down pressed)?
so I need the blankflash the screen does not turn on I must have changed the boot,need to return to the fastboot screen only this
Update:
I finally got around to Unlocking the bootloader, and rooting.
The Terminal Emulator method wasn't working for me.
I flashed the new TWRP
[PORT] Unofficial TWRP for G7 Power by Geofferey
and used the steps in this thread
[GUIDE] How to create 'mmcblk0.img' from a working device? by kalyansundhar
and used
The mmcblk0.img is almost 30gb, I'm compressing it, and uploading now may take awhile.
Old Post
That mmcblk0.img can be used to boot the non-working G7 into Fastboot mode, as described in the links below
and then you just need to reflash the firmware.
[Guide] [Unbrick] How to revive a hard bricked Moto G5 by TheFixItMan
https://forum.xda-developers.com/g5/how-to/rooted-moto-g5-run-morning-post-image-t3776012
https://android.stackexchange.com/questions/125135/how-to-pull-mmcblk0-to-a-windows-pc
Edit:
I finally got around to Unlocking the bootloader, and rooting.
The Terminal Emulator method wasn't working for me.
I flashed the new TWRP
[PORT] Unofficial TWRP for G7 Power by Geofferey
and used the steps in this thread
[GUIDE] How to create 'mmcblk0.img' from a working device? by kalyansundhar
and used
Code:
dd if=/dev/block/mmcblk0 of=/external_sd/XT1955.5.mmcblk0.img bs=1000000000 count=30Old Post
That mmcblk0.img can be used to boot the non-working G7 into Fastboot mode, as described in the links below
and then you just need to reflash the firmware.
[Guide] [Unbrick] How to revive a hard bricked Moto G5 by TheFixItMan
https://forum.xda-developers.com/g5/how-to/rooted-moto-g5-run-morning-post-image-t3776012
https://android.stackexchange.com/questions/125135/how-to-pull-mmcblk0-to-a-windows-pc
Edit:
Last edited:
I'm uploading a mmcblk0.img that I pulled from my XT1955-5 but my internet isn't great.
I finally got a copy uploaded.
XT1955.5.mmcblk0.img.zip
https://mega.nz/#!WKgHmIaB!CO57014-m-5NPcrI9Jt2-MCdnW4e7dajS7O5CpjeapY
Note: you have to change the block size in the command
it needs to be unzipped, and then follow steps in
[Guide] [Unbrick] How to revive a hard bricked Moto G5 by TheFixItMan
It should work for anything with a Snapdragon 632
G7, G7 Play but not the G7 Plus that has a Snapdragon 636
XT1955.5.mmcblk0.img.zip
https://mega.nz/#!WKgHmIaB!CO57014-m-5NPcrI9Jt2-MCdnW4e7dajS7O5CpjeapY
Note: you have to change the block size in the command
Code:
bs=1000000000[Guide] [Unbrick] How to revive a hard bricked Moto G5 by TheFixItMan
It should work for anything with a Snapdragon 632
G7, G7 Play but not the G7 Plus that has a Snapdragon 636
Last edited:
Did you change the block size to match your device?it didn't work
Ask who ever pulled the image what block size they used and then substitute those figures in the command in the guide to write the image
Also make sure your sd card is large enough - I'd say at least 64gb for this device
Last edited:
I have a doubt my moto g7 power se brick why I restored the persist file of a motorcycle g4 plus in twrp that's why it was brick
Will there be a solution with the guide you mention?
---------- Post added at 08:49 PM ---------- Previous post was at 08:42 PM ----------
It should load the bootloader off the sdcard (when you press the corresponding buttons to enter bootloader mode) where you can then reflash stock firmware
I've no idea what other damage to the motherboard flashing files from another device has caused
The persist partition maybe rebuilt on first boot - I'm not sure
Last edited:
Our Apps
Get our official app!
The best way to access XDA on your phone
Nav Gestures
Add swipe gestures to any Android
One Handed Mode
Eases uses one hand with your phone