Question Help: Can't flash twrp recovery from PC to my Phone (F3)

Search This thread

zoinksy

Member
Apr 5, 2023
12
0
I successfully unlocked my bootloader, then I tried flashing the twrp by following munchy's tutorial from YouTube (as someone recommended here). I also used the twrp recovery file he provided in the description, by using the latest platform tools from the official website. It was going pretty good. I even got the TeamWin logo, and also loaded up the twrp interface, and was able to navigate through it. But the problem was my internal storage wasn't showing up. So I booted back to my system normally to see If I can find a solution. Then I think I tried again after restarting to see if it fixes itself, but the same problem was persisting. The next time when I tried again, I used the latest twrp version which I downloaded from the official twrp website.

But since my 3rd attempt, I am not able to see any TeamWin recovery come up on my phone, when I connect I do the "fastboot boot (twrp filename)" command in cmd. When I do the command, nothing shows up. The device remains in the Fastboot mode, or just turns off. When I switch it back on, It turns on normally and boots into the phone without any issues, and I can use it. I've tried switching back to the original twrp version munchy used in the above linked video, but same result.

What did I do wrong here? How do I make my phone get into the twrp recovery when I enter the fastboot boot (twrp filename) command thru my PC? How do I make my Internal Storage available to view int he TWRP recovery so I can install it from my Downloads folder? I am on MIUI 14.0.4 If that helps. My end goal is to install Magisk.

Any tips/guides/suggestions are appreciated.
 

NOSS8

Recognized Contributor
Installing TWRP and root does not erase your data.
Remove security from the lock screen. (decryption).Normally the latest TWRP decrypts the data.
Install Platform tools ,put the TWRP in the folder and run the commands from the folder.
TWRP SKK, Use A12 if your system is in A12/A13 if system A13.
Rename it to twrp.img
CMD
fastboot boot twrp.img
Powershell
./fastboot boot twrp.img
Once booted, go to Advanced -> Press "Flash current TWRP"
If offered, both slots.
 
Last edited:
  • Like
Reactions: cyanGalaxy

zoinksy

Member
Apr 5, 2023
12
0
Installing TWRP and root does not erase your data.
Remove security from the lock screen. (decryption).Normally the latest TWRP decrypts the data.
Install Platform tools ,put the TWRP in the folder and run the commands from the folder.
TWRP SKK, Use A12 if your system is in A12/A13 if system A13.
Rename it to twrp.img
CMD
fastboot boot twrp.img
Powershell
./fastboot boot twrp.img
Once booted, go to Advanced -> Press "Flash current TWRP"
If offered, both slots.
Thank you. I had put backed the screen lock after the first 2 attempts because someone said to to that on a YT video after they faced the same problem. Now I tried again by removing the screen lock and the latest twrp for my device also boots up just fine. Now the problem Is I still can't access my internal storage 🥲.
 

zoinksy

Member
Apr 5, 2023
12
0
Still having removed the screen security?
Which rom(fullname)?
Which TWRP?
Yes, I removed the screen security, though I can enter TWRP, I can't read the internal storage. MIUI 14.0.4.

I just watched a YT video where the dude does the following:

-TWRP Recovery
- Wipe
- Format Data
- Types 'yes'

then

-TWRP Recovery
- Reboot
- Recovery
- Do not Install

After coming back to recovery after rebooting, he gets a pop up, which at the swipe says "Swipe to allow for modifications" which he swipes, then now after checking the Internal Storage, It's readable now. Is this a possible solution?
 

zoinksy

Member
Apr 5, 2023
12
0
Twrp A13, obviously if you don't want to keep the data.
Twrp/wipe format data type yes/reboot TWRP.
If error red lines, reboot TWRP and repeat the operation.
Sideload roms or use OTG.
what's twrp A13? Also, I just unlocked my bootloader a few hours ago, so my phone has already done a factory reset and i don't have anything to lose except the Magisk APK and .img file in my phone.

But I have a question, will doing the format data just do a factory reset, or will I lose my ROM? Because I'm not trying to install a custom ROM, I just want to Install Magisk as the end goal with my current ROM.
 

zoinksy

Member
Apr 5, 2023
12
0
I'm using the latest one I could find on the TWRP website for my device. Not aware If it supports Android 13 though as it isn't mentioned on the website. Just asking my prev question, will doing the format data from TWRP just do a factory reset, or do I lose the ROM and will have to install a custom ROM?

second question I forgot to ask in my prev post, after i do the format data and put the Magisk APK and twrp img file again on my device, will my device stay decrypted as I formatted the data, or will the problem persist?

sorry If i sound dumb 😬
 

NOSS8

Recognized Contributor
I'm using the latest one I could find on the TWRP website for my device. Not aware If it supports Android 13 though as it isn't mentioned on the website. Just asking my prev question, will doing the format data from TWRP just do a factory reset, or do I lose the ROM and will have to install a custom ROM?

second question I forgot to ask in my prev post, after i do the format data and put the Magisk APK and twrp img file again on my device, will my device stay decrypted as I formatted the data, or will the problem persist?

sorry If i sound dumb 😬
Use this TWRP(officiel).
twrp-3.7.0_12-v7.5_A13-alioth-skkk.img
 
  • Like
Reactions: jefffrom

zoinksy

Member
Apr 5, 2023
12
0
thank you, this is the one I was looking for. Sorry to bother you again, now I installed the Magisk V26.1 apk from TWRP. And when I boot back to system and try opening the magisk manager, this happens. It says downloading, forever. I think I shouldn't have directly downloaded the latest version. So probably have to downgrade it a bit. For that, what will I have to do?

Can I just hold the Magisk icon, and uninstall it simply like any other app? Or do I have to do it from the TWRP? Also, Is it necessary for me to uninstall it before downgrading, or can I just download the apk of older magisk version and flash it from twrp just like I did previously?
 

Attachments

  • document_5026443021562938126.mp4
    5 MB · Views: 0
Last edited:

NOSS8

Recognized Contributor

cyanGalaxy

Senior Member
Dec 30, 2018
794
386
25
Germany
Sony Xperia M
Moto G4
I don't doubt it, the Twrp A12 also works for certain operations on an A13 system but for certain Miui roms some bootloop.
Hm ok.

Welp for me on AOSP, it works nicely. I flash a new build (or two) every week. Backup/Restore works as should. UI is nice and modern, imo better than TWRP. That's why I'm recommending it.

Haven't heard anyone saying that they can't view Phone storage on OrangeFox.
 

néonaloj

Senior Member
Dec 29, 2014
993
462
Hi,

@NOSS8 , I'd like to ask : I've only some hours to wait to unlock the BL. But one question, as it's yet the stock rom (FW V13.0.11.0, A12), wich twrp should I use ? I want to install a A13 rom (that supposes FW V 14.xxx !)
So :
- fastboot boot twrp (but wich one ?? A12 or 13 ?? ; skkk ? Or ?) (+ "flash current twrp" OR "install it in ramdisk"?)
- reboot recovery
- flash FW V14.xxx
- flash rom
- format data
- reboot system
- flash magisk (last version ? Seems to be 'big' changes ?)
- flash what I need (V4A, DFE (??), ....)

What do you think ?
Thanks a lot ! Main question is about what version of twrp.. Help will be very appreciated ! 😉
 

NOSS8

Recognized Contributor
Hi,

@NOSS8 , I'd like to ask : I've only some hours to wait to unlock the BL. But one question, as it's yet the stock rom (FW V13.0.11.0, A12), wich twrp should I use ? I want to install a A13 rom (that supposes FW V 14.xxx !)
So :
- fastboot boot twrp (but wich one ?? A12 or 13 ?? ; skkk ? Or ?) (+ "flash current twrp" OR "install it in ramdisk"?)
- reboot recovery
- flash FW V14.xxx
- flash rom
- format data
- reboot system
- flash magisk (last version ? Seems to be 'big' changes ?)
- flash what I need (V4A, DFE (??), ....)

What do you think ?
Thanks a lot ! Main question is about what version of twrp.. Help will be very appreciated ! 😉
Instead, use Miflash with a Fastboot rom, you can extract the boot img for root.(don't re lock the bootloader).
You can root without TWRP, but according to this thread, if you root you lose the TWRP and vice versa, I don't know if this is still relevant.(I don't have this device).
If you need ,install the TWRP A13 after flashing the A13.

See this thread for instructions

***Note:
Use the TWRP SKKK.
Advantage with Miflash, the Fastboot roms contain all the imgs.
EDIT:
omitted link:rolleyes:
 
Last edited:
  • Like
Reactions: néonaloj

néonaloj

Senior Member
Dec 29, 2014
993
462
Instead, use Miflash with a Fastboot rom, you can extract the boot img for root.(don't re lock the bootloader).
You can root without TWRP, but according to this thread, if you root you lose the TWRP and vice versa, I don't know if this is still relevant.(I don't have this device).
If you need install the TWRP A13 after flashing the A13.

See this thread for instructions

***Note:
Use the TWRP SKKK.
Advantage with Miflash, the Fastboot roms contain all the imgs.
I'm very greatfull for your quick reply ! Thanks 😊
The device is too a Poco f3, sorry.. This doesn't need to flash magisk for twrp to stick (I had another one I've broken)
But I don't understand what's the advantage to first flash a fastboot rom..? As you say to flash twrp would loose root and vice versa... (I've read the thread you're talking about ofox)
So I wanted to go trough +- the way I mentionned, as A13 as well as ofox 'seems' to work (but I'm carefull with that twrp on stock MIUI A12, and I never used ofox..)
So you do think it's a bad idea ?? The rom I want to flash is crdroid.
I'm more lost now 😉...

Thanks again !
 

Top Liked Posts

  • There are no posts matching your filters.
  • 1
    Installing TWRP and root does not erase your data.
    Remove security from the lock screen. (decryption).Normally the latest TWRP decrypts the data.
    Install Platform tools ,put the TWRP in the folder and run the commands from the folder.
    TWRP SKK, Use A12 if your system is in A12/A13 if system A13.
    Rename it to twrp.img
    CMD
    fastboot boot twrp.img
    Powershell
    ./fastboot boot twrp.img
    Once booted, go to Advanced -> Press "Flash current TWRP"
    If offered, both slots.
    1
    I'm using the latest one I could find on the TWRP website for my device. Not aware If it supports Android 13 though as it isn't mentioned on the website. Just asking my prev question, will doing the format data from TWRP just do a factory reset, or do I lose the ROM and will have to install a custom ROM?

    second question I forgot to ask in my prev post, after i do the format data and put the Magisk APK and twrp img file again on my device, will my device stay decrypted as I formatted the data, or will the problem persist?

    sorry If i sound dumb 😬
    Use this TWRP(officiel).
    twrp-3.7.0_12-v7.5_A13-alioth-skkk.img
    1
    Hi,

    @NOSS8 , I'd like to ask : I've only some hours to wait to unlock the BL. But one question, as it's yet the stock rom (FW V13.0.11.0, A12), wich twrp should I use ? I want to install a A13 rom (that supposes FW V 14.xxx !)
    So :
    - fastboot boot twrp (but wich one ?? A12 or 13 ?? ; skkk ? Or ?) (+ "flash current twrp" OR "install it in ramdisk"?)
    - reboot recovery
    - flash FW V14.xxx
    - flash rom
    - format data
    - reboot system
    - flash magisk (last version ? Seems to be 'big' changes ?)
    - flash what I need (V4A, DFE (??), ....)

    What do you think ?
    Thanks a lot ! Main question is about what version of twrp.. Help will be very appreciated ! 😉
    Instead, use Miflash with a Fastboot rom, you can extract the boot img for root.(don't re lock the bootloader).
    You can root without TWRP, but according to this thread, if you root you lose the TWRP and vice versa, I don't know if this is still relevant.(I don't have this device).
    If you need ,install the TWRP A13 after flashing the A13.

    See this thread for instructions

    ***Note:
    Use the TWRP SKKK.
    Advantage with Miflash, the Fastboot roms contain all the imgs.
    EDIT:
    omitted link:rolleyes:
    1
    I'm very greatfull for your quick reply ! Thanks 😊
    The device is too a Poco f3, sorry.. This doesn't need to flash magisk for twrp to stick (I had another one I've broken)
    But I don't understand what's the advantage to first flash a fastboot rom..? As you say to flash twrp would loose root and vice versa... (I've read the thread you're talking about ofox)
    So I wanted to go trough +- the way I mentionned, as A13 as well as ofox 'seems' to work (but I'm carefull with that twrp on stock MIUI A12, and I never used ofox..)
    So you do think it's a bad idea ?? The rom I want to flash is crdroid.
    I'm more lost now 😉...

    Thanks again !
    I edited my post and added the missing link.
    If the Cdroid is A13 you will need:
    1 / flash the correct Firmware, TWRP A13, (sometimes it does not work, you have to flash the complete ROM) Miflash.
    2/Twrp/format data type yes/reboot Twrp
    3/ then flash the rom following the instructions of the OP
    4/root(if necessary).
    1
    Ok so you do think Miflash is mandatory..
    The CR9 thread tells to flash FW and rom via twrp. Format data, reboot recovery. Then flash what's needed (after first booting system). But nobody to tell wich recovery to use..

    I need my phone, maybe beter I'll flash CR8 (A12) at this time.. (it was the rom I had on my previous F3..) ?

    Again thanks you !
    I'm not saying Miflash is mandatory but sometimes firmware flash with Twrp, despite without any error, doesn't work.
    With Miflash you will be sure to be on the right firmware (without wasting time).
    A12 or A13 same principle.
    Could you post the link of the Cdroid?