[HELP] I can't find my s905x3 stock firmware

[awibabau]

Box is HK1 Box S905x3 4/64GB 100M

T.I.A.

 

[beddelem]

Hi just have it for you
see video to flash because you need install licence to hk1 firmware
i do it a lot of time
2019 2020 and now 2021 works on my hk1
Are your sur for 100M ? i never sse hk1 100m always 1000m

on the video you find link with recovery pack

other link the last version 2021

X3 u219.HK1_BOX_1000M_9.0.2021.04.07.12.54.zip

drive.google.com

 

[zackiptv]

hello can give me firmware for 4/32 not 4/64 please

 

[mAtvXk]

u218.VONTAR_X3_1000M_9.0.2022.03.04.22.25.img.7z [Dropbox]

 

[beddelem]

hello can give me firmware for 4/32 not 4/64 please

My HK1 box is a 4/32 and this 3 firmware works

 

[zackiptv]

My HK1 box is a 4/32 and this 3 firmware works

but mother board s905x4 not s905x3 please help

 

[beddelem]

but mother board s905x4 not s905x3 please help

Hello happy new year

HK1 X4 TV Box with AMLogic S905X4 :​

ah212.HK1RBOX-X4_1000M_11.2022.03.05.13.49-ota.zip

drive.google.com

 

[beddelem]

but mother board s905x4 not s905x3 please help

you will find a lot of firmware on https://chinagadgetsreviews.com/firmwares

 

[zackiptv]

you will find a lot of firmware on https://chinagadgetsreviews.com/firmwares

thank you very match

 

[Matrix40au]

Hi just have it for you
see video to flash because you need install licence to hk1 firmware
i do it a lot of time
2019 2020 and now 2021 works on my hk1
Are your sur for 100M ? i never sse hk1 100m always 1000m

on the video you find link with recovery pack

other link the last version 2021

X3 u219.HK1_BOX_1000M_9.0.2021.04.07.12.54.zip

drive.google.com

If you click the youtube link, and watch the original video on Youtube, the original firmware link is attached on Youtube page!

 

[zackiptv]

hello i need firmware hk1 x3

 

[ath156]

HK1x3 (round) S905x3 4/32 GB BT Gigabit - FreakTab

Decided to create own thread since I dont know wether is same like rectangle one. Stock Firmware supposed to be these: 32GB ROM version STOCK initial HK1_X3_S905X3_2019-11-23.zip HK1_X3_S905X3_1000M_U212_9.0.2019.11.23.18.29.img...

forum.freaktab.com

 

[zackiptv]

i have hk1 x3 it write boot but nothing on tv no display please help

 

[ath156]

i have hk1 x3 it write boot but nothing on tv no display please help

[ROM] Mod: HK1 X3 / H96 max X3 / VONTAR X3 / Transpeed X3 Air / Bqeel Y8 Max (Amlogic

Thank you for your feedback.:) Taking into account your remarks here are the corrected instructions to install the rom with an SD card : If you want to install the firmware with an sd card please do the following: A.* Download the program Burn...

forum.xda-developers.com

[ROM] Mod: HK1 X3 / H96 max X3 / VONTAR X3 / Transpeed X3 Air / Bqeel Y8 Max (Amlogic S905X3) - FreakTab

[ROM] Mod: HK1 X3 / H96 max X3 / VONTAR X3 / Transpeed X3 Air / Bqeel Y8 Max (Amlogic S905X3) This mod is based on the Malay mod v1.2 . You can download the Malay mod (starts in Russian) from here : https://yadi.sk/d/GWW_dL7anKvorA The Malay mod is based on the original for HK1 X3...

forum.freaktab.com

Have a look at the 1st post of the above links. This is the way to install a stock/custom firmware. I have H96 max X3 (which is actually in the same "family" as yours).

You need:
- USB Burning Tool version 2.2.0
- A firmware cable (you can even make it yourself with 2 old/spare cables)
- A suitable firmware (either stock or custom)

Better do not use the method with micro sd card.
In some extreme cases (hard bricked TVbox) you may have to open it and connect 2 pins. In one or another way you will bring your TVbox back to life.

 

[Matrix40au]

Box is HK1 Box S905x3 4/64GB 100M

T.I.A.

I found the original firmware in a Youtube video post, drop down info on the video, click MORE

The original firmware is hosted on his site.

https://pg3d-hax.uk/downloads/hk1/hk1box-recoveries.zip

I've tried it and it worked for me, I screwd up my original firmware and used this to restore to factory!

Hope it helps!!!

 

[Matrix40au]

[ROM] Mod: HK1 X3 / H96 max X3 / VONTAR X3 / Transpeed X3 Air / Bqeel Y8 Max (Amlogic

Thank you for your feedback.:) Taking into account your remarks here are the corrected instructions to install the rom with an SD card : If you want to install the firmware with an sd card please do the following: A.* Download the program Burn...

forum.xda-developers.com

[ROM] Mod: HK1 X3 / H96 max X3 / VONTAR X3 / Transpeed X3 Air / Bqeel Y8 Max (Amlogic S905X3) - FreakTab

[ROM] Mod: HK1 X3 / H96 max X3 / VONTAR X3 / Transpeed X3 Air / Bqeel Y8 Max (Amlogic S905X3) This mod is based on the Malay mod v1.2 . You can download the Malay mod (starts in Russian) from here : https://yadi.sk/d/GWW_dL7anKvorA The Malay mod is based on the original for HK1 X3...

forum.freaktab.com

Have a look at the 1st post of the above links. This is the way to install a stock/custom firmware. I have H96 max X3 (which is actually in the same "family" as yours).

You need:
- USB Burning Tool version 2.2.0
- A firmware cable (you can even make it yourself with 2 old/spare cables)
- A suitable firmware (either stock or custom)

Better do not use the method with micro sd card.
In some extreme cases (hard bricked TVbox) you may have to open it and connect 2 pins. In one or another way you will bring your TVbox back to life.

i have hk1 x3 it write boot but nothing on tv no display please help

This is the firmware for the HK1 x3.

Download Android Pie 9.0 firmware for HK1 X3 TV Box «

chinagadgetsreviews.com

ANdroid PIE (9.0) Firmware for HK1 X3

 

[ath156]

This is the firmware for the HK1 x3.

Download Android Pie 9.0 firmware for HK1 X3 TV Box «

chinagadgetsreviews.com

ANdroid PIE (9.0) Firmware for HK1 X3

If you didn't notice I gave him a link where the HK1 X3 was uploaded :https://forum.xda-developers.com/t/help-i-cant-find-my-s905x3-stock-firmware.4374213/#post-88320223
According to this link the stock firmware was also there:https://drive.google.com/uc?id=18yFXnEv-awubFjS3fuEH2g2DJ9mx6E8C&export=download