Help identify/Root Erisin ES9015V

Search This thread

Yankis

New member
Dec 1, 2015
2
0
Hi, i brought head unit ES9015V from Erisin. i would like to root/install custom rom, but i can't identify it. Maybe some one could help me.

Model number : rkpx2
Screen :1024*600 HD
CPU : RK3188
MCU version number : LM-AND841PX-8015V1.15
Android version: 4.4.4
Kernel version:3.0.36+
[email protected] #145
Build number
PX2_LEIMA_DAZHONG-V1.00.0043.00.00-2015-07-30

there is link from Erisin www erisinwholesale.com/special-car-dvd/vw/erisin-es9015v-8-vw-android-444-car-dvd-gps-413.html

Thanks.
 

9_Mad-Max_5

Senior Member
Jan 30, 2015
84
9
Pretty simple you need the ROM for an RK3188 with the screenresolution 1024x600.
If you go to Malaysk opened thread you will find your needed firmware.

Gesendet von meinem C6903 mit Tapatalk
 

Yankis

New member
Dec 1, 2015
2
0
Pretty simple you need the ROM for an RK3188 with the screenresolution 1024x600.
If you go to Malaysk opened thread you will find your needed firmware.

Gesendet von meinem C6903 mit Tapatalk

Hi thanks for response,
but is my device MTCB-Device, because my MCU version number is LM-AND841PX-8015V1.15 as i see all MCU for Malaysk starts with MTCB and mine starts with LM, it confuses me a little :) what is the worst scenario if i install wrong Malaysk firmware ( i mean RK3188 and 1024x600 selected properly but not MCU)?
 

typos1

Senior Member
Apr 3, 2007
9,381
1,680
UK
No, its NOT an MTCB device, MTCB would appear at the start of the MCU number if it was an MTCB unit, so youre in the wrong thread.

Not even heard of that one before so cant offer any advice on what type it is I m afraid.
 

9_Mad-Max_5

Senior Member
Jan 30, 2015
84
9
Hello

I recently bought the same device.
What an mistake was, like I know now.
And I got stuck at the same problem but I'm not pretty sure if it is an RK3066 or RK3188 unit.

So I thought about it would it be possible to use another RK3188 SoM-Card with an MTCB MCU in the same device?
That would make it possible to use Malayskis ROMs, I think.




Gesendet von meinem E6653 mit Tapatalk
 

9_Mad-Max_5

Senior Member
Jan 30, 2015
84
9
I just know now that my idea was wrong to change the SoM.

Because the MCU is on antoher Board.
But what would be if the MCU-Hardware is the same and I just install the MTCD-MCU-Software.

After that it should be possible to install the new MTCD-Software or am I wrong?
 

donpuen

New member
Oct 7, 2010
2
0
Dudas!!!

Yo también tengo el ES9015v y querría saber si alguien ha conseguido ROOT, sabe como entrar en recovery y así poder cambiar la ROM a este modelo

I also have the ES9015v and would like to know if anyone has gotten ROOT, you know how to enter recovery and be able to change the ROM to this model
 

faria

Inactive Recognized Developer / Retired Senior Mod
Feb 24, 2006
2,915
770
45
Jersey
root unit with Kingroot (you will need an internet connection)
Install Supersu-me.
https://androidmtk.com/replace-kinguser-with-supersu

This units have NO user accessible recovery!
If you mess with system files it will turn into a soft brick!
The only way to fix it is with a rom installation.
There is no roms available to the public.

I have A single din unit and i soft bricked it after rooting it and installing some xposed modules.
What saved my unit was after much negotiation etc, i was able to acquired the rom and mcu update for it.

a few other points,
Current roms in the xda are not compatible with this units even though they have the same chips.

The firmware is riddled with bugs, this things are running test firmwares.
dvr crashes every 5 minutes.
Any launcher you install gets disabled after a reboot.
Bluetooth streaming crashes the Bluetooth stack and only a reset makes work again.